Does anyone know how to reference the ongoing dataset within the dataflow in sql?
So here is the scenario I have.
1) OLE DB SOURCE
2) Lookup a value and that column gets added to the dataset
3) Lookup another value but this time I would rather code the sql rather than select a referencing table. How do I reference the current dataset?
Thanks,
Cheston
I have a small number of rows in a dataset, Table 1. There is a CLOB on a large dataset, Table 2. They join on a PK. I would like to retrieve this CLOB and add it to the data flow for Table1. In short I want to emulate the following:
Table 1: Small table without CLOB, 10 rows.
Table 2: Large table with CLOB, 10,000,000 rows
select CLOB
from table2
where pk = (select pk from table1)
I want this to return the CLOBs for the small number of rows in Table 1. The PK is indexed obviously so it should be a fast look up.
Table 1 and Table 2 live on different Oracle databases. How do I perform this operation efficiently in SSIS? It seems the Lookup and Merge Join wont do this.
Hi there
Let say i have single dataset with different view (tables/list/matrix etc) with filter on it. Is it possible referencing from one view (table/list/matrix) to another? Basically how to access the other field for instance SUM from different view and used for the other view instead.
Thank you
Hi there
Let say i have single dataset with many view (tables/list/matrix etc) and utilise "filter" to manipulate each view.
Is it possible referencing from one view (table/list/matrix) to another? Basically how to access the other field for instance SUM from different view and used for the other view instead. People mentioned about SCOPE but I don't think this is relevant to this situation ?!?!
Thank you
Hello,
I am attempting to create a cascading parameter.
Parameter's 1 & 2 are multi-valued.
Datasets 1 & 2 supply Parameter's 1 & 2.
The values for Parameter 1 as derived from Dataset 1 are 'A', 'B', 'C', 'D' and 'E'.
The potential values for Parameter 2 will only be created if value 'C' is amongst the multiple values selected for Parameter 1.
Thus I need to write my query for Dataset 2 so that it can check the values of Parameter 1 for the existence of 'C' otherwise it returns nothing.
What is the best practice for a dataset referencing the values of a multi-valued parameter in order to generate it's resultset?
Any help is appreciated.
I'm creating a new Integration Services Project that copies data out of a SQL 7 server, transforms it, and places the data on a SQL 2005 (SP 2) Server. When defining a lookup transformation, if I specify an OLE DB Connection to my server running SQL 7 as the reference table, as soon as I click on the Colums tab, Visual Studio closes / crashes and dumps me to windows. I don't get an error message. If however I specify a connection to a server running SQL 8, or SQL 2005, no problems.
Is this supposed to happen?
My workstation is running Windows XP Pro SP2, Visual Studio 2005 Pro.
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
The server that doesn't work for a reference table is running Windows 2000 Server SP4
SQL 7.00.623
Thanks for your help,
Kirk
I am using SSRS 2014 SP1 x64 and VS2013 Update 5.
I have the following expressions to attempt to calculate ageing on a statement report.
=SUM(IIF(DateDiff("d", (Fields!OrderDate.Value, "Invoice"), Now())<=0, (Fields!LineAmount.Value, "Invoice"), 0))
=SUM(IIF(DateDiff("d", (Fields!OrderDate.Value, "Invoice"), now())>=1 and DateDiff("d", (Fields!OrderDate.Value, "Invoice"),Now())<=30, (Fields!LineAmount.Value, "Invoice"), 0))
=SUM(IIF(DateDiff("d", (Fields!OrderDate.Value, "Invoice"), now())>=31 and DateDiff("d", (Fields!OrderDate.Value, "Invoice"), Now())<=60, (Fields!LineAmount.Value, "Invoice"), 0))
=SUM(IIF(DateDiff("d", (Fields!OrderDate.Value, "Invoice"), now())>=61 and DateDiff("d", (Fields!OrderDate.Value, "Invoice"), Now())<=90, (Fields!LineAmount.Value, "Invoice"), 0))
=SUM(IIF(DateDiff("d", (Fields!OrderDate.Value, "Invoice"), now())>=91, (Fields!LineAmount.Value, "Invoice"), 0))
Now when I try to add First to the field selector I get an error stating ... uses a First, Last or Previous aggregate in an outer aggregate.
How exactly do I reference this field from the Invoice dataset (there are at least two datasets)?
Hello,
I am using Lookup Item in the Data flow of the SSIS tool.
During my data flow this task is failing because can not find a match.
Please let me know how can I say - if there is no match - use the default value like 0.
Is it possible to do using Lookup?
Thanks.
Hi,
can anyone suggest a way whereby I can take a value (in my case supplied as a report parameter) and perform a lookup in an existing dataset ?
My report has two datasets. One, the report data, and the second, a list of code/descriptions which is used to populate a parameter selection dropdown (the parameter value chosen is used in the call to the SP which provides the report data). Now... I would like to put the description for the chosen code, in the report header. Can I find a way ?
Any ideas ?
Thanks,
Hi All,
Sorry if this is an obvious question, I am new to SQL Server.
For the failures of a data flow lookup transformation, I would like to add a prompt through some kind of UI control (eg. datagrid) for new lookup entries, which I would then take the new entries, redo the lookup and continue on with my process.
Or, is there a better way to include adding new lookup entries to my process?
Cheers,
Graham
Hi All,
Is there a way the fuzzy lookup or grouping can be trained so that similarities and confidence values rely on previously matched strong links?
For example: I can link 80% of my two datasets using one strong identifier (say phone #) which I trust. My goal then, is to use the probability of matching of the rest of my linking fields (say Name,Address,Gender,DOB) in a "matched by phone number" pair to train a fuzzy lookup task to be done on the unlinked 20% of the datasets.
This "training set" would in theory influence the similarity and confidence values of the fuzzy output since each linking column would carry a different weight or contribution towards a confident match.
Does anyone out there knows how to do this in practice in SSIS?
i have another problem with my library...
i create a library with a datagridview, that i polute manually from several database querys...
thats just fine.... works excelent..
but if i browse the aspx page from another computer on the network, when the code tries to read the data set give me an error
Cannot find the table 0
seems like a problemwith the connection or the query, but if i browse the page from the localmachine i works just fine
please help
Public MM_CONEXION_STRING As String = "server=HP001SQL2000;uid=xxx;pwd=xxxxx;database=GSSDOTNET;"Dim myConnection As New SqlConnection(MM_CONEXION_STRING)Dim myCommand As New SqlCommand(SQL, myConnection)
myConnection.Open()Dim objDS As New System.Data.DataSet()
objDS=myCommand.ExecuteReader()For Each FILA As System.Data.DataRow In objDS.Tables(0).Rows .......
Next
The dataset2 control doesn't seem to want to place the text in the right spot. I put it right after the 1st Dataset and the user comments wound up all the way down in the footer of the site. I want them to appear in the white area just underneath the article text.
Here's a link to one of my articles so you can see this.
http://www.link-exchangers.com/view_full_article.aspx?aid=50
Down at the bottom left corner you'll see white space below the article. I'd like to have all the comments lined up going down the page. Is the dataset the best control for this task?
Hello,
I have created SSIS package programmatically, I want to add Lookup transformation,
How can I add column from reference dataset to the transformation?
I have try to add new output column but it gives me an validation error, I write following coed to add new output column to lookup.
IDTSOutputColumn90 outputColumn = this.lookup.OutputCollection[0].OutputColumnCollection.New();
outputColumn.Name = col.Name;
outputColumn.Description = "Staging table output";
outputColumn.TruncationRowDisposition = DTSRowDisposition.RD_FailComponent;
outputColumn.ErrorOrTruncationOperation = "Copy Column";
outputColumn.SetDataTypeProperties(col.DataType, col.Length, col.Precision, col.Scale, col.CodePage);
Please suggest other way to add column from reference dataset to transformation output.
For example, the table below, has a foreign key (ManagerId) that points to EmployeeId (primary key) of the same table.
-------Employees table--------
EmployeeID . . . . . . . . . . int
Name . . . . . . . . . . . nvarchar(50)
ManagerID . . . . . . . . . . . int
If someone gave you an ID of a manager, and asked you to get him all employee names who directly or indirectly report to this manager.
How can that be achieved?
I am trying to upload a file in ASP.net 2.0 to a SQL database using the FileUpload control. I am doing this by way of a typed dataset.Here is my code.Dim rta As New ResponseTableAdapterDim rdt As ResponseDataTable = rta.GetResponseByID(1)Dim rr As ResponseRow = rdt(0)Dim fs As New FileStream(fu.PostedFile.FileName, FileMode.Open, FileAccess.Read)Dim br As New BinaryReader(fs)Dim image() As Byte = br.ReadBytes(fs.Length)br.Close()fs.Close()rr.UploadFile = imagerr.NameFile = fs.Namerta.Update(rdt)The code runs without an error but afterwards I find that nothing has been stored in the UploadFile cell in the database but the file name has been stored in the NameFile cell in the database. Any ideas?Your help is much appreciated. James
View 1 Replies View RelatedIve run into a situation where some code im using will not function the same when between these two cases. So, this has me wondering what is going on behind the scenes. What is the sequence of events that are occurring that would possibly be messing things up.Here is the sample codeIts a gridview that is using a sqldatasource control. The code works fine, but if you want to bind the grid to a dataset and call databind yourself, things dont work as expected and the other features that the code performs just isnt happening, at least not for me.
View 1 Replies View RelatedI have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
----------------------------
Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand)
----------------------------
An error has occurred during report processing. (rsProcessingAborted)
I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:
select @parameter
I need output to be like: value, value, value ... etc.
The dataset control query looks something like the following:
select
ID,
a,
b,
c,
d
from DATASET.dbo.Table
where ID in (select @parameter)
I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?
I am not sure If I can do this with a lookup, but what I would like todo is perhaps use lookup to retrieve a control date from anunassociated table to control what date is entered in another table.For example :the main table , table 1 has many entries with a field called date_enter which is the date the record was entered.table 2 has a control_dateIf the date entered in table 1 is less than or = to the control date wewant to give the user a error message.I am thinking of using display only field and lookup to set itWould need to have the date value from the control table available tothe active table of table 1 when entering the the date_enter.However as there is no join field between the two tables am not surehow to do it. Was thinking might have to add a key field that wasallways null and in the BEFORE EDITADD EDITUPDATE section set it sothat the key would be nullAm using Informix 5 , Any help would be apprecia
View 3 Replies View RelatedWe did some "at scale" fuzzy lookup tests today and were rather disappointed with the performance. I'm wanting to know your experience so I can set my performance expectations appropriately.
We were doing a fuzzy lookup against a lookup table with 25 million rows. Each row has 11 columns used in the fuzzy lookup, each between 10-100 chars. We set CopyReferenceTable=0 and MatchIndexOptions=GenerateAndPersistNewIndex and WarmCaches=true. It took about 60 minutes to build that index table, during which, dtexec got up to 4.5GB memory usage. (Is there a way to tell what % of the index table got cached in memory? Memory kept rising as each "Finished building X% of fuzzy index" progress event scrolled by all the way up to 100% progress when it peaked at 4.5GB.) The MaxMemoryUsage setting we left blank so it would use as much as possible on this 64-bit box with 16GB of memory (but only about 4GB was available for SSIS).
After it got done building the index table, it started flowing data through the pipeline. We saw the first buffer of ~9,000 rows get passed from the source to the fuzzy lookup transform. Six hours later it had not finished doing the fuzzy lookup on that first buffer!!! Running profiler showed us it was firing off lots of singelton SQL queries doing lookups as expected. So it was making progress, just very, very slowly.
We had set MinSimilarity=0.45 and Exhaustive=False. Those seemed to be reasonable settings for smaller datasets.
Does that performance seem inline with expectations? Any thoughts to improve performance?
I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute
Taking a snapshot of the reference table
Taking a snapshot of the reference table
Building Fuzzy Match Index
component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
Any ideas on what else could be causing this?
Say I want to lookup a value in another dataset, but there is a grouping that requires you to know what the values for each level is in order to get to the correct detail record. Can you still use the lookup function with more than one field to compare against? So for example
Department
\___SalesPerson
\___Measure
I want to be able to add a new row at the Measure level, but lookup each field from another dataset. In order to do that I will need the Department AND SalesPerson values to do the lookup, but I dont think the Lookup function will let us do that will.
Hi All,
Actually this is in regard to SCD Type 2 Dimension, Scenario is like that I am moving Fact table from some old source and I have dimensionA description value in fact which I want to replace with appropriate id from Dimension Table and that Dimension table is SCD Type 2 based on StartDate and EndDate and Fact Table doesn't contains direct date value rather there is timeId in Fact so to update the value in Fact table I have to Join Time Dimension table and other Dimension Table to replace fact Description with proper Id.
Lets assume DimensionA Structure
id
Description
StartDate
EndDate
Fact Table
id
measure1
measure2
TimeId
Description
Time Dimension
TimeId
Date
Day
Hour ...
I am doing a lookup that requires mapping 2 columns in the column mapping section. When I do this, I get the error "Row yielded no match during lookup" . The SQL that I captured in SQL profiler does find the record when I run it in Management Studio. I have already tried trimming everything to no avail.
Why is this happening?
I tried enabling memory restrictions but then I my package hangs and I get a SQLDUMPER_ERRORLOG.log file with the following logged:
07/24/07 13:35:48, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 5952
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0100C5D0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0033.mdmp
07/24/07 13:35:49, ACTION, DtsDebugHost.exe, Watson Invoke: No
Why am I getting this error with "Enable Memory Restriction"?
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
does any one have and example of how to embedd a flash swf file onto a report.??? Is it possable? any examples would be helpful.
View 1 Replies View RelatedI have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters. I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
View 0 Replies View RelatedI have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters.
I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
I found out the data I need for my SQL Report is already defined in a dynamic dataset on another web service. Is there a way to use web services to call another web service to get the dataset I need to generate a report? Examples would help if you have any, thanks for looking
View 2 Replies View RelatedI have a table that includes the html-output of different parts of my pages. This table grows very big very fast, and rows older than 24 hours are useless.
My question is if it is possible to have temporary rows, whose are automatically deleted after these 24 hours? And then how to accomplish that?
Hi all,
I don't understand what's happening here.
I have a Conditional Split with 3 outputs. On the first output I have a lookup, when I execute the package I have 56 rows going through the Conditional Split, all rows are then going to the 2nd and 3rd output but the lookup on the first output generates an error "Row yielded no match during lookup".
I don't understand why the lookup is generating an error while there is no row going through it.
Any idea ?
Sébastien.
Is there any way to display this information in the report?
Thanks
I am designing a ssis package,This is intends to mine text data(Data extracted from websites).
Term lookup/Term extraction has been used as tools for mining.
I have lookup terms defined with me for reference table,but the main problem lie in extracting the nearby text/number/charcters to these lookup terms during mining.
For example :
I found noun "Email" 200 (frequency score) times in my text,Now I want to extract nearby email address(this is also true for PhoneNumber,Address attributes also).so how can I achieve this with SSIS.
If u have some idea/suggestion to carry out this challenge with or without Term Extraction/Term Lookup,plz do write here.