Regarding Collation For Mirroring && Error 1418
Nov 10, 2006
Can I know is it possible that if the database servers' collation in both principal and mirror server might unable to get the mirroring? Because one of database collation is Latin1_General_CI_AS while another server (mirror) is SQL_Latin1_General_CP1_CI_AS. I did several type of troubleshooting but still unable to solve the Error 1418. All the ports are stated as started, able to use telnet to connect to the server's port but still unable to get a connection for the database mirroring. I do really need help on it. Thx for the assistance and kindness.
Best Regards,
Hans
View 4 Replies
ADVERTISEMENT
Mar 17, 2006
Hello again,
This is further to my previous post, which has had over thirty viewing but as yet no replies. Is there really no solution to this problem?
I have now given up trying to use the wizard to get mirroring running, as although I'm not entirely sure, some stuff I've read implies that the wizard only works using Windows authentication. Maybe someone can confirm this. Either way, the wizard doesn't work for me (see my previous post).
So instead of using the wizard I've now tried to set up mirroring manually using SQL statements. Following are the steps I've taken. I've tried to replicated exactly what it says in the online documentation. At the end of the post are the SQL statements issued.
1. Enable encrypted outbound connections on the primary server
2. Enable encrypted outbound connections on the mirror server
3. Enable encrypted outbound connections on the witness server
4. Enable encrypted inbound connections on the primary server
5. Enable encrypted inbound connections on the mirror server
6. Enable encrypted inbound connections on the witness server
7. Set mirror's partner to the primary
8. Set primary's partner the mirror (EXPLOSION)
There might be more stuff to do after this, but here is where it breaks down. Again, the error is the same as before when using the wizard:
Msg 1418, Level 16, State 1, Line 1
The server network address "TCP://10.152.58.243:7024" can not be reached or does not exist. Check the network address name and reissue the command.
Which is **INCORRECT** or at least highly unhelpful because:
i) netstat -abn shows the sql server process listening on port 7024; no other processes are listening on this port
ii) I can telnet to port 7024 on this machine and issue the 16 keystrokes
Please, someone help, I am crying tears of despair. SQL below.
Cheers,
Mike
/*
The following is a complete list of the SQL statements issued.
Please assume they are issued on the relevant master databases.
*/
/* -------- 1. ENABLE OUTBOUND CONNECTIONS ON THE PRIMARY -------- */
DROP ENDPOINT Mirroring
GO
DROP CERTIFICATE BILL_PRIMARY_CERT
GO
DROP MASTER KEY
GO
CREATE MASTER KEY
ENCRYPTION BY PASSWORD = '**************' -- real password used
GO
CREATE CERTIFICATE BILL_PRIMARY_CERT
WITH SUBJECT = 'BILL_PRIMARY_CERT for database mirroring',
START_DATE = '01/01/2006', EXPIRY_DATE = '01/01/2099'
GO
CREATE ENDPOINT Mirroring
STATE = STARTED
AS TCP (
LISTENER_PORT=7024
, LISTENER_IP = ALL
)
FOR DATABASE_MIRRORING (
AUTHENTICATION = CERTIFICATE BILL_PRIMARY_CERT
, ENCRYPTION = REQUIRED ALGORITHM AES
, ROLE = ALL
)
GO
BACKUP CERTIFICATE BILL_PRIMARY_CERT
TO FILE = 'C:certificatesBILL_PRIMARY_CERT.cer'
GO
-- then copy certificate to other two machines
/* -------- 2. ENABLE OUTBOUND CONNECTIONS ON THE MIRROR -------- */
DROP ENDPOINT Mirroring
GO
DROP CERTIFICATE BILL_SECONDARY_CERT
GO
DROP MASTER KEY
GO
CREATE MASTER KEY
ENCRYPTION BY PASSWORD = '**************' -- real password used
GO
CREATE CERTIFICATE BILL_SECONDARY_CERT
WITH SUBJECT = 'BILL_SECONDARY_CERT for database mirroring',
START_DATE = '01/01/2006', EXPIRY_DATE = '01/01/2099'
GO
CREATE ENDPOINT Mirroring
STATE = STARTED
AS TCP (
LISTENER_PORT=7024
, LISTENER_IP = ALL
)
FOR DATABASE_MIRRORING (
AUTHENTICATION = CERTIFICATE BILL_SECONDARY_CERT
, ENCRYPTION = REQUIRED ALGORITHM AES
, ROLE = ALL
)
GO
BACKUP CERTIFICATE BILL_SECONDARY_CERT
TO FILE = 'C:certificatesBILL_SECONDARY_CERT.cer'
GO
-- then copy certificate to other two machines
/* -------- 3. ENABLE OUTBOUND CONNECTIONS ON THE WINTESS -------- */
DROP ENDPOINT Mirroring
GO
DROP CERTIFICATE BILL_WITNESS_CERT
GO
DROP MASTER KEY
GO
CREATE MASTER KEY
ENCRYPTION BY PASSWORD = '**************' -- real password used
GO
CREATE CERTIFICATE BILL_WITNESS_CERT
WITH SUBJECT = 'BILL_WITNESS_CERT for database mirroring',
START_DATE = '01/01/2006', EXPIRY_DATE = '01/01/2099'
GO
CREATE ENDPOINT Mirroring
STATE = STARTED
AS TCP (
LISTENER_PORT=7024
, LISTENER_IP = ALL
)
FOR DATABASE_MIRRORING (
AUTHENTICATION = CERTIFICATE BILL_WITNESS_CERT
, ENCRYPTION = REQUIRED ALGORITHM AES
, ROLE = ALL
)
GO
BACKUP CERTIFICATE BILL_WITNESS_CERT
TO FILE = 'C:certificatesBILL_WITNESS_CERT.cer'
GO
-- then copy certificate to other two machines
/* -------- 4. ENABLE INBOUND CONNECTIONS ON THE PRIMARY -------- */
/* enable inbound from the mirror */
DROP CERTIFICATE BILL_SECONDARY_CERT
GO
DROP USER MIRROR_SECONDARY_USER
GO
DROP LOGIN MIRROR_SECONDARY_LOGIN
GO
CREATE LOGIN MIRROR_SECONDARY_LOGIN
WITH PASSWORD = '****************' -- real password used
GO
CREATE USER MIRROR_SECONDARY_USER
FOR LOGIN MIRROR_SECONDARY_LOGIN
GO
CREATE CERTIFICATE BILL_SECONDARY_CERT
AUTHORIZATION MIRROR_SECONDARY_USER
FROM FILE = 'c:certificatesBILL_SECONDARY_CERT.cer'
GO
GRANT CONNECT ON ENDPOINT::Mirroring
TO MIRROR_SECONDARY_LOGIN
GO
/* enable inbound from the witness */
DROP CERTIFICATE BILL_WITNESS_CERT
GO
DROP USER MIRROR_WITNESS_USER
GO
DROP LOGIN MIRROR_WITNESS_LOGIN
GO
CREATE LOGIN MIRROR_WITNESS_LOGIN
WITH PASSWORD = '****************' -- real password used
GO
CREATE USER MIRROR_WITNESS_USER
FOR LOGIN MIRROR_WITNESS_LOGIN
GO
CREATE CERTIFICATE BILL_WITNESS_CERT
AUTHORIZATION MIRROR_WITNESS_USER
FROM FILE = 'c:certificatesBILL_WITNESS_CERT.cer'
GO
GRANT CONNECT ON ENDPOINT::Mirroring
TO MIRROR_WITNESS_LOGIN
GO
/* -------- 5. ENABLE INBOUND CONNECTIONS ON THE MIRROR -------- */
/* enable inbound from the primary */
DROP CERTIFICATE BILL_PRIMARY_CERT
GO
DROP USER MIRROR_PRIMARY_USER
GO
DROP LOGIN MIRROR_PRIMARY_LOGIN
GO
CREATE LOGIN MIRROR_PRIMARY_LOGIN
WITH PASSWORD = '****************' -- real password used
GO
CREATE USER MIRROR_PRIMARY_USER
FOR LOGIN MIRROR_PRIMARY_LOGIN
GO
CREATE CERTIFICATE BILL_PRIMARY_CERT
AUTHORIZATION MIRROR_PRIMARY_USER
FROM FILE = 'c:certificatesBILL_PRIMARY_CERT.cer'
GO
GRANT CONNECT ON ENDPOINT::Mirroring
TO MIRROR_PRIMARY_LOGIN
GO
/* enable inbound from the witness */
DROP CERTIFICATE BILL_WITNESS_CERT
GO
DROP USER MIRROR_WITNESS_USER
GO
DROP LOGIN MIRROR_WITNESS_LOGIN
GO
CREATE LOGIN MIRROR_WITNESS_LOGIN
WITH PASSWORD = '****************' -- real password used
GO
CREATE USER MIRROR_WITNESS_USER
FOR LOGIN MIRROR_WITNESS_LOGIN
GO
CREATE CERTIFICATE BILL_WITNESS_CERT
AUTHORIZATION MIRROR_WITNESS_USER
FROM FILE = 'c:certificatesBILL_WITNESS_CERT.cer'
GO
GRANT CONNECT ON ENDPOINT::Mirroring
TO MIRROR_WITNESS_LOGIN
GO
/* -------- 6. ENABLE INBOUND CONNECTIONS ON THE WITNESS -------- */
/* enable inbound from the mirror */
DROP CERTIFICATE BILL_SECONDARY_CERT
GO
DROP USER MIRROR_SECONDARY_USER
GO
DROP LOGIN MIRROR_SECONDARY_LOGIN
GO
CREATE LOGIN MIRROR_SECONDARY_LOGIN
WITH PASSWORD = '****************' -- real password used
GO
CREATE USER MIRROR_SECONDARY_USER
FOR LOGIN MIRROR_SECONDARY_LOGIN
GO
CREATE CERTIFICATE BILL_SECONDARY_CERT
AUTHORIZATION MIRROR_SECONDARY_USER
FROM FILE = 'c:certificatesBILL_SECONDARY_CERT.cer'
GO
GRANT CONNECT ON ENDPOINT::Mirroring
TO MIRROR_SECONDARY_LOGIN
GO
/* enable inbound from the primary */
DROP CERTIFICATE BILL_PRIMARY_CERT
GO
DROP USER MIRROR_PRIMARY_USER
GO
DROP LOGIN MIRROR_PRIMARY_LOGIN
GO
CREATE LOGIN MIRROR_PRIMARY_LOGIN
WITH PASSWORD = '****************' -- real password used
GO
CREATE USER MIRROR_PRIMARY_USER
FOR LOGIN MIRROR_PRIMARY_LOGIN
GO
CREATE CERTIFICATE BILL_PRIMARY_CERT
AUTHORIZATION MIRROR_PRIMARY_USER
FROM FILE = 'c:certificatesBILL_PRIMARY_CERT.cer'
GO
GRANT CONNECT ON ENDPOINT::Mirroring
TO MIRROR_PRIMARY_LOGIN
GO
/* -------- 7. SET MIRROR'S PARTNER TO THE PRIMARY SERVER -------- */
ALTER DATABASE failover_test
SET PARTNER OFF
GO
ALTER DATABASE failover_test
SET PARTNER = 'TCP://10.152.58.242:7024';
GO
/* -------- 8. SET PRIMARY'S PARTNER TO THE MIRROR SERVER -------- */
ALTER DATABASE failover_test
SET PARTNER OFF
GO
ALTER DATABASE failover_test
SET PARTNER = 'TCP://10.152.58.243:7024';
GO
/*
Response:
Msg 1418, Level 16, State 1, Line 1
The server network address "TCP://10.152.58.243:7024" can not be reached or does not exist. Check the network address name and reissue the command.
*/
View 6 Replies
View Related
Nov 8, 2006
I am trying to do mirroring using SQL Server Ent. 2005 SP1 on two machines. I was able to create end points on both the machines at the port no.s 5091 and 5092 respectively. I have all the security setting settings for both the users. I am getting error no. 1418 while starting mirroring sessions.
Can anybody tell me how to troubleshoot this error?
View 3 Replies
View Related
Nov 3, 2006
Hi everyone, I am a newbie on setting up database mirroring and right now I am facing the connection problem during mirroring which is Error 1418 which kinda common problem. I just view through all the threads regarding this problems and BOL also. However, I just based on all the guide to setting it up and the result are still the same.
I did tried on both instance names in my server for mirroring and displayed the same results as well. When I type this t-sql on mirror server :
ALTER DATABASE AdventureWorks SET PARTNER = 'TCP://TSUYOSHI:5022' -- which is the principal server
It shows connection ok to me. However, when I type this t-sql on the principal server :
ALTER DATABASE AdventureWorks SET PARTNER = 'TCP://HAN:5023' -- which is the Mirror server
It shows connection ok to me. However, when I type this t-sql on the principal server :
Msg 1418, Level 16, State 1, Line 1
The server network address "TCP://HAN:5023" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
I just wondering that why mirror can get a connection to principal but principal can't? Is that any extra configuration especially security settings that needed to be set within the database (MS sql server 2005) ?
I hope I am able to get any assistance from anyone at here and will appreciate on it. Thanx. Anyway, sorry for the inconvenience
Best Regards,
Hans
View 11 Replies
View Related
Aug 16, 2006
Hi,
I am trying to mirror the databse with a witness server.
I have sql server 2005 with SP1 or both my mirror and principle and sql express on my witness.
The problem is when I click start mirroring, I get the following error
The server network address"TCP://serveraddress:7026" can not be reached or does not exist. Check the network address name and that the ports for the local and remote epoints are operational.
(Microsoft SQL server, error:1418)
I have pinged the address it works fine . The telnet comes up with a blank screen.
When I look at the the server log file viewer, I get the following message
An error occured while receiving data: 10054 (An existing connection was forcibly closed by the remote host)
for 'TCP://serveraddress:7026'.
Please help me soon
View 6 Replies
View Related
May 3, 2007
Hello All!
Can you help me with that problem:
I want to mirror some database to another server (without witness server)
I have 2 machines, where Microsoft SqL '05 Developer Edition SP1 installed.
Two machines working in domain network, one of them is a server, secondmachine enters into domain with username and password.
I can ping each machine by the ip adress and by the networks name, like a.machine.com, b.machine.com
TCP/IP is enabled in Server Configuration.
What I DO:
1. Create full backup of my database on server A
2. Create full backup of transaction logs on server A
3. Restore my database and transaction logs from backup WITH NO RESTORE on server B
4. On machine A: I open tasks -> mirroring properties dialog (configuring mirroring) and go to configure security dialog.
5. I use standart properties (port, endpoint name, ecryption)
6. On page "Mirror Server Instanse" i click "Browse for more" and type there server B adrress (b.machine.com). Click connect.
7. Server configuring was sucsessful
8. Server network addresses were:
Principal : TCP://a.machine.com:5022
Mirror : TCP://b.machine.com:5022
9. I click Start Mirroring but system gives me error:
Error 1418, The Server network address can not be reached or does not exists.
I open logs on machine b (mirror server):
Message
Database Mirroring login attempt by user 'NT AUTHORITYAnonymous login.' failed with error:
'Connection handshake failed. The login 'NT AUTHORITYAnonymous login' does not have CONNECT permission on the endpoint.
State 84.'. [CLIENT: 172.168.0.130]
and this message before:
The database 'mybase' is marked RESTORING and is in a state that does not allow recovery to be run.
When I configured database mirroring, i choose "Windows Authentication", Why 'NT AUTHORITYAnonymous login.' ...??
View 5 Replies
View Related
Jun 16, 2006
Hi,
I'm new to DB Mirroring, and I am trying to get it going in a test enviroment between two SQL 2005 Dev Servers. I have followed documentation that I have found but cannot get past a 1418 error when establishing a connection between the servers initially. Does anyone know of any good step by step guides that I could look at, in case I have missed something stupid.
Thanks in advance
Stupots
View 19 Replies
View Related
Feb 20, 2006
II use the mirroring wizard to config all these three servers(windows authorization is used), the error logs in primary server and mirror server are showed as below
a) On primary server:
Error: 1474, Severity: 16, State: 1
Database mirroring connection error 4 'An error occurred while receiving data: '10054(An existing connection was forcibly closed by the remote host.)'.' for 'TCP://mymirror.mydomain:5022'
b) On mirror server:
Database Mirroring login attempt by user 'NT AUTHORITYANONYMOUS LOGON.' failed with error: 'Connection handshake failed. The login 'NT AUTHORITYANONYMOUS LOGON' does not have CONNECT permission on the endpoint. State 84.'.
It states I do NOT have permission on this endpoint, but actually, I grant the permission to the endpoint on both primary and mirror server using command
GRANT CONNECT ON ENDPOINT::Mirroring TO [mydomainmyuser];
Also, I followed the article http://msdn2.microsoft.com/en-us/library/ms189127.aspx ,no firewall issue, the endpoint is created and started by checking sys.database_mirroring_endpoints
Hope someone can help me resolve this issue... Thank you very much..
View 44 Replies
View Related
Feb 5, 2006
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
Thanks for my help and suggestions...
Regards,
Gonzal
View 9 Replies
View Related
May 1, 2007
Hello,
I've restored a SQL Server 2000 database with a Latin1_General_BIN collation from a .dmp file to a SQL Server 2005 server with a default collation of SQL_Latin1_General_CP1_CI_AS. When I try to change the database collation I get hundreds of the following error:
The object 'CK_PM10200_GLPOSTD_00AF8CF' is dependent on database collation. So, in this case, is it even possible to change the collation if there are objects in the database that are dependent on it?
Thanks,
Bruce
View 7 Replies
View Related
Feb 1, 2002
I am attempting to transfer data between two SQL Server 2000 DBs. The transfer fails and returns a message "Incorrect Syntax near 'Collate'". There is an option in the DTS Import/Export Wizard of Use Collation but this option is turned off. Is there any server specific configuration regarding collation I might turn off? Both databases reside on the same server and the Collation properties for both DB's are set the same. Please Help
View 1 Replies
View Related
Nov 1, 2004
hi,
Our SQL servers have been setup to collate American. However, our pc's are setup for South Africa. This is creating a nightmare for us as we use Great Plains, which is an American product with American date format.
We are having difficulties in doing any development due to this issue.
Can someone please advise me as to whether there is another way around this ?
Thanks
View 1 Replies
View Related
Mar 10, 2008
I got this error:
Cannot resolve the collation conflict between "Latin1_General_BIN" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
SELECT
analyst_lastname, analyst_firstname,
time_spent, AHD.View_Request.type, AHD.View_Request.description AS Ticket_Desc, team, (AHD.View_Request.close_date - AHD.View_Request.open_date) as close_secs,
AHD.View_Request.active_flag, customer.c_nx_string1 AS SDCust_BusUnit, Customerps.BUSINESS_UNIT AS PSCust_BusUnit,
CASE WHEN Customerps.Business_Unit IS NULL THEN Customer.c_nx_string1 ELSE Customerps.Business_Unit END AS BU, CONVERT(CHAR(8),
DATEADD(ss, AHD.View_Request.time_spent_sum, 0), 108) AS TotalTicket_Time, Assigneeps.DEPTNAME, Assigneeps.DEPTID,
Assigneeps.BUSINESS_UNIT, AHD.View_Request.status_name, AHD.View_Request.group_name, DATEADD(ss, AHD.View_Request.last_mod_dt,
CONVERT(DATETIME, '1969-12-31 20:00:00', 101)) AS moddate, DATEADD(ss, AHD.View_Request.close_date, CONVERT(DATETIME,
'1969-12-31 20:00:00', 102)) AS closedate, AHD.View_Request.close_date, DATEADD(ss, AHD.View_Request.open_date, CONVERT(DATETIME,
'1969-12-31 20:00:00', 102)) AS opendate,
AHD.View_Request.close_date - AHD.View_Request.open_date AS Time_to_Close,
CASE Assigneeps.W_HOME_DEPARTMENT when '001510' then '510'
when '001811' then '811'
when '001824' then '824'
when '001830' then '830'
when '001833' then '833'
when '001835' then '835'
when '001836' then '836'
when '001837' then '837'
when '001838' then '838'
when '001839' then '839'
when '001840' then '840'
when '001841' then '841'
when '001842' then '842'
when '001843' then '843'
when '001844' then '844'
when '001853' then '853'
when '010999' then '999'
when '101520' then '520'
when '103520' then '520'
when '104520' then '520'
when '106520' then '520'
when '110520' then '520'
when '112520' then '520'
when '114520' then '520'
when '121520' then '520'
when '122520' then '520'
when '123520' then '520'
when '123550' then '550'
when '123560' then '560'
when '131356' then '836'
when '131357' then '836'
when '131520' then '520'
when '133450' then '450'
when '133520' then '520'
when '133550' then '550'
when '138520' then '520'
when '142450' then '450'
when '142520' then '520'
when '149451' then '451'
when '149452' then '452'
when '149550' then '550'
when '151450' then '450'
when '151520' then '520'
when '151550' then '550'
when '169520' then '520'
when '204520' then '520'
when '205520' then '520'
when '206520' then '520'
when '211520' then '520'
when '213520' then '520'
when '216520' then '520'
when '217520' then '520'
when '218520' then '520'
when '219520' then '520'
when '221520' then '520'
when '225520' then '520'
when '230520' then '520'
when '231356' then '840'
when '231357' then '840'
when '231450' then '450'
when '231520' then '520'
when '232520' then '520'
when '33A510' then '510'
when '450312' then '450'
when '450331' then '450'
when '450421' then '450'
when '451491' then '450'
when '452491' then '450'
when '45033A' then '450'
when '520011' then '520'
when '520331' then '520'
when '520381' then '520'
when '520421' then '520'
when '520511' then '520'
when '536520' then '520'
when '550061' then '550'
when '550231' then '550'
when '550331' then '550'
when '550491' then '550'
when '551450' then '450'
when 'A33450' then '450'
when 'A42450' then '450'
when 'A49451' then '451'
when 'S73A50' then '833'
when '835010' then '835'
when '842010' then '842'
when '843010' then '843'
when '999100' then '999'
when 'S73A25' then 'A25' ELSE 'Blank' END AS Budget_ID
FROM AHD.ctct AS GroupName LEFT OUTER JOIN
AHD.grpmem ON GroupName.id = AHD.grpmem.group_id LEFT OUTER JOIN
sdreport.Activity_Rpt_Act_log INNER JOIN
AHD.View_Request ON call_req_id = AHD.View_Request.persid ON
AHD.grpmem.member = analyst LEFT OUTER JOIN
AHD.ctct AS assignee ON analyst = assignee.id AND AHD.View_Request.assignee = assignee.id LEFT OUTER JOIN
AHD.ctct AS customer ON AHD.View_Request.customer = customer.id LEFT OUTER JOIN
dbo.ps_w_srvcdesk_alloc AS Customerps ON customer.c_nx_string6 = Customerps.EMPLID LEFT OUTER JOIN
dbo.ps_w_srvcdesk_alloc AS Assigneeps ON assignee.c_nx_string6 = Assigneeps.EMPLID
View 7 Replies
View Related
Aug 24, 2006
I am fairly new to SQL Server but an experienced Oracle DBA. We currently have a SQL Server 2000 database that I connect to remotely from a SQL 2005 database. The collation of the msdb on the sql server 2000 is SQL_Latin1_General_CP1_CI_AS and the database that Im trying to create a view (Call it Scottdb) in is SQL_Latin1_General_CP1_CS_AS. There has not been any problems in the past with doing any sort of joins in the Scottdb database. I recently created two new tables in Scottdb (no problem), a few associated indexes and a new view which joins both new tables to an existing table in the database. I am receiving the dreaded error:
Cannot resolve collation conflict for equal to operation
There really is nothing to the view, just a couple of easy little inner joins. I even deleted the tables and view, went to the machine directly in case it was a 2005 management studio issue and received the same error. This issue is driving me up the wall. Can someone please talk me through the best way to fix it.
Much appreciated
Scott
View 1 Replies
View Related
Sep 15, 2014
I changed the default collation of a database and every table within that except sysDiagrams , which I can't even through the designer .
View 9 Replies
View Related
Mar 22, 2006
UPDATE #TMPC
SET EsaItem = ItemClass
FROM #TMPC A,
dbo.EisAdj_ItemClass_V B
WHERE A.EsaItem = B.ItemClassCODE
This code is part of my procedure. I always get error--Server: Msg 446, Level 16, State 9, Procedure GetAdjDataFromShipment, Line 282
Cannot resolve collation conflict for equal to operation.
when program execute at this section.
I try to add this statement "COLLATE SQL_Latin1_General_CP1_CI_AS", but it seems not working. I do not know why!
View 3 Replies
View Related
Mar 22, 2004
We have a server which we needed to upgrade the OS on it from NT 4 Server to Windows 2000 Server.
As the system disks are seperate from the data disks. We did a fresh install of Windows, then installed SQL Server, applied service pack version 3, and then restored the master database.
From Query Analyser everything appears fine. I can query all the databases and tables, see them all, the web applications talk the database fine so all the users have recreated OK.
However .... if we try and look at the database through management console we get the following error.
A connection could not be established to ....
Reason: Cannot resolve collation conflict for like operation..
This happends logged in locally to the machine as administrator as well as connecting remotely. Does anybody have any idea what is happening?
View 8 Replies
View Related
Jul 29, 2013
I am trying to change the name collation of a SQL database as an update script I am running needs the main collation to be SQL_Latin1_General_CP1_CI_AS
I have tried going into Properties and options then changing the collation type but I get this error
"The Database could not be exclusively locked to perform the operation. ALTER DATABASE failed. The default collation of database 'nutri93' cannot be set to SQL_Latin1_General_CP1_CI_AS."
I have tried SQL scripts that I have found to take the database into a single user mode but still get the same errror.
Usually its this Database nutri93 could not be locked exclusively
How I can change the collation type? Currently the only option seems to be a complete hard install of SQL Management Studio
View 8 Replies
View Related
Oct 24, 2007
Hi,
I am getting the following error message when trying to run a script:
"Cannot resolve collation conflict for equal to operation."
Any help on resolving this would be most appreciated, thanks!
my SQL code is as follows:
CREATEVIEW IP_SLAM_EXTRACT_1
AS
SELECT LEFT(a.provider,3) AS [Trust Code],
CASEWHEN a.practice_code='F86687'THEN 'F86723'
WHEN a.practice_code='F86733'THEN 'F86068'
WHEN a.practice_code='F86677' OR
a.practice_code='F86693'THEN 'F86675'
WHEN a.practice_code='F86714' OR
a.practice_code='F86129'THEN 'F86634'
WHEN a.practice_code='F86050'THEN 'Y00090'
WHEN a.practice_code='F86669' OR
a.practice_code='F86662'THEN 'F86702'
WHEN a.practice_code='F886051' THEN 'F86634'
WHEN a.practice_code='F86059' OR
a.practice_code='F86055'THEN 'F86060'
WHEN a.practice_code='F86690'THEN 'F86637'
WHEN a.practice_code='F86089'THEN 'F86060'
WHEN a.practice_code='F86717' OR
a.practice_code='F86728'THEN 'F86716'
WHEN a.practice_code='F86727' OR
a.practice_code='F86728'THEN 'F86721'
WHEN a.practice_code IS NULL AND
a.postcode NOT IN
(SELECT DISTINCT p.POSTCODE
FROM REPOSITORY..[Exeter PostCode]p)THEN 'Null_not_5NA'
WHEN a.practice_code IS NULL AND
a.postcode IN
(SELECT DISTINCT p.POSTCODE
FROM REPOSITORY..[Exeter PostCode]p)THEN 'Null_5NA'
ELSE a.practice_code END AS [GP Practice],
LEFT(
CASE WHEN a.treatment_function_code LIKE 'mis%' OR
a.treatment_function_code LIKE '?%' OR
a.treatment_function_code LIKE '#%' THEN
a.main_specialty_code
WHEN a.treatment_function_code ='' OR
a.treatment_function_code IS NULL AND
a.main_specialty_code IS NOT NULL THEN
a.main_specialty_code
WHEN a.treatment_function_code ='' OR
a.treatment_function_code IS NULL AND
a.main_specialty_code IS NULL THEN '999'
WHEN a.treatment_function_code LIKE '0%'THEN '999'
ELSE a.treatment_function_code END,3) AS [Specialty Code],
a.hrg_code_calculated AS [HRG Code],
a.local_patient_identifier as [Patient id Code],
a.patient_classificationAS [Pat Class],
a.admission_method AS [Adm Method],
a.spell_discharge_date,
a.consultant_code,
a.diagnosis_primary_icd,
a.gp AS [GP Code],
a.length_of_stay AS [Spell LOS],
--pat_type,
--prv_typ,
a.spell_special_service AS Spell_Service_ID,
a.date_of_birth,
a.administrative_category,
a.cds_type
--FROMSUS_5NA_NEW_0607 a--
FROM SUS_apc_5NA_view a
WHEREa.fin_month < 4
AND a.fin_year = 2008
ANDa.main_episode='M'
ANDa.pbr_exclusion IS NULL
ANDa.pct_calculated = '5NA'
ANDa.commissioner LIKE '5NA%'
ANDa.Spell_Discharge_Date<'30/06/2007'
View 10 Replies
View Related
May 21, 2007
I'm getting the following errors when trying to execute the following script on the server, its part of the standard asp.net membership and roles, anybody have any ideas how I get get round this?
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 50
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 58
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 84
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 92
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
/****** Object: StoredProcedure [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles] Script Date: 05/20/2007 11:23:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER OFF
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'
CREATE PROCEDURE [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]
@ApplicationName nvarchar(256),
@UserNames nvarchar(4000),
@RoleNames nvarchar(4000)
AS
BEGIN
DECLARE @AppId uniqueidentifier
SELECT @AppId = NULL
SELECT @AppId = ApplicationId FROM aspnet_Applications WHERE LOWER(@ApplicationName) = LoweredApplicationName
IF (@AppId IS NULL)
RETURN(2)
DECLARE @TranStarted bit
SET @TranStarted = 0
IF( @@TRANCOUNT = 0 )
BEGIN
BEGIN TRANSACTION
SET @TranStarted = 1
END
DECLARE @tbNames table(Name nvarchar(256) NOT NULL PRIMARY KEY)
DECLARE @tbRoles table(RoleId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @tbUsers table(UserId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @Num int
DECLARE @Pos int
DECLARE @NextPos int
DECLARE @Name nvarchar(256)
DECLARE @CountAll int
DECLARE @CountU int
DECLARE @CountR int
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@RoleNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @RoleNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@RoleNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@RoleNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbRoles
SELECT RoleId
FROM dbo.aspnet_Roles ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredRoleName AND ar.ApplicationId = @AppId
SELECT @CountR = @@ROWCOUNT
IF (@CountR <> @Num)
BEGIN
SELECT TOP 1 N'''', Name
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT ar.LoweredRoleName FROM dbo.aspnet_Roles ar, @tbRoles r WHERE r.RoleId = ar.RoleId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(2)
END
DELETE FROM @tbNames WHERE 1=1
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@UserNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @UserNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@UserNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@UserNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbUsers
SELECT UserId
FROM dbo.aspnet_Users ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredUserName AND ar.ApplicationId = @AppId
SELECT @CountU = @@ROWCOUNT
IF (@CountU <> @Num)
BEGIN
SELECT TOP 1 Name, N''''
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT au.LoweredUserName FROM dbo.aspnet_Users au, @tbUsers u WHERE u.UserId = au.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(1)
END
SELECT @CountAll = COUNT(*)
FROMdbo.aspnet_UsersInRoles ur, @tbUsers u, @tbRoles r
WHERE ur.UserId = u.UserId AND ur.RoleId = r.RoleId
IF (@CountAll <> @CountU * @CountR)
BEGIN
SELECT TOP 1 UserName, RoleName
FROM @tbUsers tu, @tbRoles tr, dbo.aspnet_Users u, dbo.aspnet_Roles r
WHERE u.UserId = tu.UserId AND r.RoleId = tr.RoleId AND
tu.UserId NOT IN (SELECT ur.UserId FROM dbo.aspnet_UsersInRoles ur WHERE ur.RoleId = tr.RoleId) AND
tr.RoleId NOT IN (SELECT ur.RoleId FROM dbo.aspnet_UsersInRoles ur WHERE ur.UserId = tu.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(3)
END
DELETE FROM dbo.aspnet_UsersInRoles
WHERE UserId IN (SELECT UserId FROM @tbUsers)
AND RoleId IN (SELECT RoleId FROM @tbRoles)
IF( @TranStarted = 1 )
COMMIT TRANSACTION
RETURN(0)
END
'
END
GO
Thanks
View 2 Replies
View Related
Jun 26, 2007
I am facing the Follwing error:
Cannot resolve the collation conflict between "Latin1_General_BIN" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
Follwing is my Code:
code]select * from #temp_Table a
where ltrim(rtrim(Model_ID))+''+ltrim(rtrim(Set_Serial_Number)) in
(select ltrim(rtrim(b.Model_SerialNo)) from #temp_Table2 b where b.Auto_Id=1)[[/code]
So Please help me to proper solutions
Thank's
View 1 Replies
View Related
Nov 7, 2007
I have upgraded many of my servers from 2000,SP2 to 2005. Whilst doing 1 server I have the following error message:
Cannot resolve the collation conflict between "Latin1_General_CI_AS" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation..To continue, correct the problem, and then run SQL Server Setup again.
I have tried to search in many places for this error whilst upgrading but found none, please help.
View 7 Replies
View Related
Dec 19, 2013
while using store procedure in report getting error as mentioned below.
Cannot resolve the collation conflict between "Latin1_General_CI_AI" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 1 Replies
View Related
May 5, 2014
I have setup db containment with a different Collation that the TempDB and it works perfectly when using temptables. However, when I try to run a script with links a table on my contained db with systable, example sys.allobjects I still get the collation error. I or now added "COLLATE database_default" for the fields which is causing the error on the join. I know we do not link to the the systables a lot so it's easier using db containment where we have a lot of collation issues when working with temptables.
The option is not available to change collation to be the same as the system databases.
Another question I have is, our database is currently using Latin1_General_BIN. Our system db's are on Latin1_General_CI_AS. This DB ontainment is OK and working here. What happens if we add Reporting services db which uses Latin1_General _CI_AS_KS_WS, will it work using our DB collation,with TempDB and Reporting services collation or are we going to run into trouble. I did actually test this and we do get the following collation error when combining Temp tables with our database and Reporting services
Msg 468, Level 16, State 9, Line 4
Cannot resolve the collation conflict between "Latin1_General_CI_AS_KS_WS" and "Latin1_General_BIN" in the equal to operation.
View 0 Replies
View Related
Dec 12, 2007
Hello,
I have a distributed query that uses tables located on in SQL Server 2005 and SQL Server 2000? Does anyone know how I can fix the error below?
Thanks a lot for help!
Msg 468, Level 16, State 9, Line 1
Cannot resolve the collation conflict between "Latin1_General_CI_AI" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 13 Replies
View Related
May 21, 2007
I'm getting the following errors when trying to execute the following script on the server, its part of the standard asp.net membership and roles, anybody have any ideas how I get get round this? Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 50
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 58
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 84
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 92
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
/****** Object: StoredProcedure [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles] Script Date: 05/20/2007 11:23:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER OFF
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'
CREATE PROCEDURE [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]
@ApplicationName nvarchar(256),
@UserNames nvarchar(4000),
@RoleNames nvarchar(4000)
AS
BEGIN
DECLARE @AppId uniqueidentifier
SELECT @AppId = NULL
SELECT @AppId = ApplicationId FROM aspnet_Applications WHERE LOWER(@ApplicationName) = LoweredApplicationName
IF (@AppId IS NULL)
RETURN(2)
DECLARE @TranStarted bit
SET @TranStarted = 0
IF( @@TRANCOUNT = 0 )
BEGIN
BEGIN TRANSACTION
SET @TranStarted = 1
END
DECLARE @tbNames table(Name nvarchar(256) NOT NULL PRIMARY KEY)
DECLARE @tbRoles table(RoleId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @tbUsers table(UserId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @Num int
DECLARE @Pos int
DECLARE @NextPos int
DECLARE @Name nvarchar(256)
DECLARE @CountAll int
DECLARE @CountU int
DECLARE @CountR int
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@RoleNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @RoleNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@RoleNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@RoleNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbRoles
SELECT RoleId
FROM dbo.aspnet_Roles ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredRoleName AND ar.ApplicationId = @AppId
SELECT @CountR = @@ROWCOUNT
IF (@CountR <> @Num)
BEGIN
SELECT TOP 1 N'''', Name
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT ar.LoweredRoleName FROM dbo.aspnet_Roles ar, @tbRoles r WHERE r.RoleId = ar.RoleId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(2)
END
DELETE FROM @tbNames WHERE 1=1
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@UserNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @UserNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@UserNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@UserNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbUsers
SELECT UserId
FROM dbo.aspnet_Users ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredUserName AND ar.ApplicationId = @AppId
SELECT @CountU = @@ROWCOUNT
IF (@CountU <> @Num)
BEGIN
SELECT TOP 1 Name, N''''
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT au.LoweredUserName FROM dbo.aspnet_Users au, @tbUsers u WHERE u.UserId = au.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(1)
END
SELECT @CountAll = COUNT(*)
FROMdbo.aspnet_UsersInRoles ur, @tbUsers u, @tbRoles r
WHERE ur.UserId = u.UserId AND ur.RoleId = r.RoleId
IF (@CountAll <> @CountU * @CountR)
BEGIN
SELECT TOP 1 UserName, RoleName
FROM @tbUsers tu, @tbRoles tr, dbo.aspnet_Users u, dbo.aspnet_Roles r
WHERE u.UserId = tu.UserId AND r.RoleId = tr.RoleId AND
tu.UserId NOT IN (SELECT ur.UserId FROM dbo.aspnet_UsersInRoles ur WHERE ur.RoleId = tr.RoleId) AND
tr.RoleId NOT IN (SELECT ur.RoleId FROM dbo.aspnet_UsersInRoles ur WHERE ur.UserId = tu.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(3)
END
DELETE FROM dbo.aspnet_UsersInRoles
WHERE UserId IN (SELECT UserId FROM @tbUsers)
AND RoleId IN (SELECT RoleId FROM @tbRoles)
IF( @TranStarted = 1 )
COMMIT TRANSACTION
RETURN(0)
END
'
END
GOAny help appreciated thanks,
View 5 Replies
View Related
Sep 2, 2004
Exception information:System.Data.SqlClient.SqlException: Cannot resolve collation conflict for equal to operation.
Who can tell me how to resolve this problem?
Thx
View 3 Replies
View Related
Jun 30, 2005
Hi all,
I have a query that I need to run where I join two tables that both
reside on different servers. I use an INNER JOIN statement to attempt
to join these tables, but for some reason I am getting the following
error message...
"
Cannot resolve collation conflict for equal to operation."
The query is as follows...
SELECT TABLE_NAME, LEFT(TABLE_NAME, CHARINDEX('_', TABLE_NAME + '_') - 1) AS Abbreviation
FROM mrcsmis.INFORMATION_SCHEMA.TABLES
INNER JOIN DEVELCAD1.Portal.dbo.dnl_db_names_log AS imp ON (imp.dnl_table_name = TABLE_NAME)
WHERE (TABLE_TYPE = 'BASE TABLE')
Thanks
Tryst
View 3 Replies
View Related
Dec 19, 2013
While using store procedure in report getting error as mentioned below !
Cannot resolve the collation conflict between "Latin1_General_CI_AI" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 2 Replies
View Related
May 1, 2007
When I use database mirroring, I get the following error when the mirroring monitor runs.
Incorrect syntax near '-'. [SQLSTATE 42000] (Error 102) Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. [SQLSTATE 42000] (Error 319). The step failed.
This is the stored procedure that mirroring creates automatically. It isn't a user sproc. Several other people have posted this error and it seems to be a Microsoft bug.
Any ideas.
Jeff
View 1 Replies
View Related
Nov 10, 2006
I got the following error log from SQL profiler when I tried to start mirroring
"
2006-11-10 11:54:47.28 Logon
Database Mirroring login attempt by user 'NT AUTHORITYANONYMOUS LOGON.' failed
with error: 'Connection
handshake failed. The login 'NT
AUTHORITYANONYMOUS LOGON' does not have CONNECT permission on the endpoint.
State 84.'. [CLIENT: 10.77.100.86]"Anybody knows the solution for the same please let me know
View 3 Replies
View Related
Oct 15, 2015
I am using SQL Server 2008. In ServerProperty function, there are two properties called “Collation” and “CollationID”. In some cases, I will only know the CollationID. Is it possible get the collation name from the CollationID? Is there a function called CollationNameFromID?
View 1 Replies
View Related
Oct 14, 2006
Hi,
when I tried to mirror database giving principal and mirror server names every details I am getting the error
'Database mirroring is disabled by default. Database mirroring is currently provided for evaluation purposes only and is not to be used in production environments.To enable database mirroring for evaluation purposes, use trace flag 1400 during startup.'
How to user trace flag 1400 during startup?
Since I am newbie Kindly guide me with step by step procedure.
thanks
View 3 Replies
View Related
