I am doing 350 controls as in a form like in reporting service . Due to so many controls the reporting sql server after deployment the preview and report must be slow. and i will checked the data transmission in stored procedure from sql server it will be faster.I am having doubt in controls in form will be slower.
Is there any suggestions without decrement the controls and to be report will be faster.
I'm trying to insert data into a table from two sources (a table and form controls) at the same time.
--this data from the tradeitem table and is inserted into the selections table
--based on the variable @builderid --no problem it works fine as is
INSERT INTO Selections ([TradeItemID], [TradeID], [ProductName], [OrigSalesPrice], [RevSalesPrice])
SELECT [TradeItemID], [TradeID], [TradeItem], [Price], [Price]
FROM tradeitems
WHERE BuilderID = '1'
However, I need these also to pull from the form controls
--These variables will pull from form controls and need to be associated
--with each record added to the seleciton table
INSERT INTO Selections ([UserDataID] = '1', [DefaultQty] = '0')
--How do I get these combined into one statement so I get the following result?
TradeItemID
TradeID
ProductName
OrigSalesPrice
RevSalesPrice
UserDataID
DefaultQty
1
72
HVAC
50
50
1
0
2
36
Plumbing
100
100
1
0
3
99
Electrical
100
100
1
0
4
4
Pain
25
25
1
0
Thanks in advance
I created some controls for filtering the report that will be displayed on the same page, but below these controls. The controls take about 200px of the top of the form, while the report will be displayed in the rest of the page.
I'm using the ReportViewer control in Async mode, so it's being rendered as an Iframe, and this is necessary because some reports will take up to a couple minutes, so I want the loading animation.
As many of you know, this type of scenario will cause two scrollbars to be shown on this Web form: one for the main form, and the other for the Iframe containing the report. To prevent this, I have html,body set to overflow:hidden. This works great at preventing the outer scrollbar from showing, and only the report has a scrollbar.
The problem is that the bottom 200px (see first paragraph above) of the report doesnt show and cant be scrolled to. Has anyone come across a solution for this situation?
I'm basically stuck either having a report with two side by side scrollbars, or a report with 1 scrollbar that cuts off the last portion of each page of a report.
We are using SSRS 2005.We designed one report.This report contains Table and chart controls .When Table is hidden,chart only is visible, this chart is going to show only on last page.There is a white space in top of the chart while hiding the table control.
Consider for an Example Report one tables and one chart . We want to show only chart,So we made Table's visible property is false.Total Number of pages is five and table has only four pages and chart has only one page that is in last page. Now the report showing Four pages are empty with header and footer and last page have a chart with header and footer.
Any suggestions how to avoid the empty pages?
I tried to Filter property to filter the table.Same empty page with header and footer is only visible
Thanks In Advance
Mugesh
Hi, I am porting a massive VB6 project to ASP.net 2005. Most of the code is fine, however because the original developers used lots of data controls and my own time restrictions I thought to replicate the functionality by using Sqldatasource controls instead.
These data controls are bound to DBtruegrids. The project has has lots of code like...
AdodcOrders.Recordset.RecordCount > 0 or If AdodcOrders.Recordset.EOF or AdodcOrders.Recordset.MoveNext() or
AdodcDetail.Recordset!FieldName
The problem is the sqldatasource control doesn't have a recordset/dataset property which I can access and manipulate, or does it? What should I do to get round these? The project has thousands of lines like this in so its not feasible to rewrite it (although if I could I would!).
Any suggestions please gratefully appreciated.
many thanks
mike
I'm trying to determine the best approach to model tables for a registration form that will be used temporarily and then taken offline once the event is over. I'd like to either model the tables so that they were reusable for other registration forms or perhaps use another method to store the data, maybe using XML or some other method if that is possible?? I'm not sure.
Different registration forms would have different input fields thereby requiring different table structures. It seems inefficient to create tables that will only be used temporarily and then no longer used. So, I would need to remember to delete the tables after they have been used or they would just take up space.
The basic requirement for this registration form is to allow the user to fill out the required fields, submit, get a registration reciept confirming their registration and allow the administrators for the event to pull the data weekly or daily into an excel spreadsheet.
I can create a flat table and a stored procedure that inserts the data. I can also write the dts package that exports the data to an excel file, which would require my intervention. I'd like to have something more automatic without my intervention.
Any suggestions would be appreciated. I'm not sure the best approach for this. Is using tables the best way to go even if the tables aren't re-usable? Requiring my attention to delete afterwards.
What are the options to generate the excel reports without my intervention?
Thanks in advance for any help.
Hi,
I'm trying to create a form with reporting services. Basically I am trying to draw this form using lines that has 2 columns down the page. The problem I have is the fields can grow on either side of the page, so the lines will not line up. I have tried putting this in a list box and then text boxes inside of these, but this will not work. I have not been able to get just the line to work because it doesn't grow with the list either. Has anyone else been able to design a form like this? Any ideas/suggestions would be greatly appreciated!Thanks SQLNewbie1000
Does Report manager in Reporting Services 2005 support form Authentication?If so where can i go to enable it?
Thank you
Kenalex
Hi,
I am invoking RS web services to render reports, using Apache Axis to generate stub classes from Reporting Service WSDL.
Please let me know if I can integrate Report Viewer control in the jsp where I am writing the report output. Else do I have to create my own custom tags simulating ReportViewer functionality.
Hello,
Anyone have any solid solutions for using Reporting Services 2005 to report against a SharePoint List and/or InfoPath Forms Document Library?
This seems to be a popular one for reporting against the SharePoint List, but it looks like there are some issues with it, such as getting it to work with Subscriptions...
http://www.teuntostring.net/blog/2005/09/reporting-over-sharepoint-lists-with.html
TIA!!
Hello,
My company Intranet has a form that agents can use to post their comments about the company to upper management, but our customer service department would like to modify the form so that the agent has to pick from a comment type.
The dropdown options on the form will be as follows:
ComplimentsComplaintsGeneral CommentsSuggestions
Each dropdown option has a designated table in a SQL DB.Using postback on the same page, I need to change which fields of the form are visible based upon which dropdown selection the user chooses, and I need the fields to then be inserted into the table that corresponds with the dropdown selection item.
For example: If the Compliments dropdown selection is picked, I need a text box to show for the user's location, the name of the customer, account number, and the message box. Once the submit button is clicked, the characters in these boxes need to be inserted into the Compliments table using its data adapter.
However, if the user selects Suggestions, the name of the customer and the account number should not be visible, since these fields do not exist and when the submit button is pressed, the Suggestions table should be updated.
If you need more information, I will provide whatever is needed.
As always, thanks for everyone's assistance.
Chris
Hi,
I got a problem.
I installed Microsoft SQL Server Management Studio Express 2005 version.
And I created a Compact database.
I created an connection in SSMSE to connect the database and opened a query form.
then, i run the following sql:
Select * from Table1
It returned 3 records to me.
After that, I used program to insert record into this table.
Then i ran this sql again, it still show me 3 records.
I closed the query form, and re-created a new query form, then run the sql, it returned 4 records to me.
Why? It's very strange and difficult to operate, right?
Is there anyone know how to make the SSMSE to return whole records without any close query form and re-create query form operation?
Thanks a lot!
And Merry X'max!!!
Hi everyone,
What is the main difference between first form normalizations and second form normalization ?
In my opinion, they are both generated for the same operation which is to prevent redundancy(in other words; duplication of data in several records).
So would you please explain it to me ?
Thanks
HiI have a Platinum database which stores dates in integer form e.g the dateis formatted as below:Column_name Type Length Precision------------------------------ ------------------------------from_date int 4 10Some of the dates in the Platinum database are as follows:729115729359730059730241730302730455How can I bring them into SQL 2000 as valid dates.Thanks for your assistanceSam CJoin Bytes!
View 1 Replies View RelatedHi, i'm very new to asp and i have a small question - If i have a control on my webpage, like "CurrentUser" (which is System.Web.UI.WebControls.LoginName), how can i use it in a query? I want a query which will return all records pertaining to the current user. If i was writing the query in normal SQL i would write the following: SELECT Date, JobID, EmployeeIDFROM TblTimeslotWHERE TblEmployee.EmployeeName = (The "CurrentUser" on the webpage) AND TblEmployee.EmployeeID = EmployeeID Thanks very much for your helpBen
View 1 Replies View RelatedIs it not possible to execute one package and then design another package? I am executing one package and trying to design another package and just have a grey window in the control tool box that says:
"there are no usable controls in this group. Drag an item onto this text to add it to the toolbar"
Can I only get my controls by dragging when another package is executing? Where do I drag them from?
Thanks,
Kayda
Hi all,
I am trying to develop a CustomReportItem similar to Matrix control. Is it possible to add some "OnClick" sort of events to a section of this CRI (As a drilldown button of matrix control allows to expand the respective column).
Please help me if there can be any solution.
This is pretty weird... any controls past the halfway horizontal point of the report get pushed into page 2. The leftmost control is not affected just those to the right of it. It's like there is an invisible tab after the leftmost control. Smaller (not leftmost controls) (not past the middle of the page) are also pushed way to the right (just not into a new page)
Is there some property (that I'm not aware of) that does this? It doesn't matter if I use textboxes or lines. I have not changed any of the default control properties. flow layout is still LTR.
In my current report I have questions and answers on separate lines...I can't place them next to each other or it screws up the pagination.
I start with a new report and it does not do this but as soon as I add 2-3 vertical pages (over 11' x 2) This starts happening.
Has anyone experienced this?
Hello everyone, I'm trying to get a count of 3 different types on the same field. For Example, let's use Gender as the field with these options: Male, Female, Not Given. What I'm wanting to do is retrieve a count for each type. What I have so far is: SELECT COUNT(Gender) WHERE Gender = 'Male' and I have to duplicate this in 3 different data controls. I would like, however, to have one datasource control with a statement along the lines of: SELECT ( SELECT COUNT(Gender) FROM Users WHERE Gender='Male), SELECT COUNT(Gender) FROM Users WHERE Gender='Female', SELECT COUNT(Gender) WHERE Gender='NotGiven' ) From UsersOr something to that effect. Any suggestions?Thank you greatly for your help,Mark
View 2 Replies View RelatedI created a user control file with 3 properties. I would like to call this user control in a datalist control in the hosting page and pass the properties from a sqldatasource control. To this end I have a code like below;
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"SelectCommand="SELECT [1], [2], [3] FROM [table1]"></asp:SqlDataSource>
<asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1" DataMember="DefaultView" >
<ItemTemplate>
<uc:kk ID="kk1" runat="server" One='<%# Eval("1") %>' Two='<%# Eval("2") %>' Three='<%# Eval("3") %>' /></ItemTemplate></asp:DataList> I don't get any errors when I run the page, however it won't work as I wish. Only thing that appears in the rows of datalist is "01.01.0001 00:00:00".
Hello All,
I am recieving this error using vs2005. I am using the login controls which creates a mdf file. i am not using sql server 2005 in this program. The program runs well in my local machine, but as soon as i publish the site, i recieve this error after i login into the site.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
does anyone know why?
thank you,
kagome
Hello !
i am new to databases so i would be grateful for your help.
I am using SQL Server 2000 and vb to access and update the records of a database.
I want your opinion about the way i am displaying data.
I have created a form with textboxes etc. which display the fields
of the table.
Now when i load the form i populate a recordset with a
"select ... from... " query.
Then i manually
set
txtfield1.text=cstr(recordset.fields("field1").value)
etc...
If i want to update the table then i have to construct manually the
query.
"update ... set field1='"+ txtfield.text +"' "
if i want to move to a next record i do
recordset.movenext
and then
txtfield1.text=cstr(recordset.fields("field1").value)
again
Is that good or should i use bound controls ?
If multiple users access the same form at the same time (from different computers) will they be locked only when they save (update) data ?
Thank you !
Hi,
i want to create dynamic controls using wpf and c#.
can any body send me some code snippet.
for example:-
one of my window page have 100s of fields like textbox, checkbox and date controls in a group inside different grid and panel.
now if admin has made that amoung 100 fields user should be able to see only 20 or 30 fields.
how will i do so, just making the fileds invisible won't work, coz all the fields should be visible from top of the form,
means i want to push all the visible fields at the top.
what are the best way to do so.
need it urgent
thanx a lot
sir
i have uploaded my website but there is a problem
It is working very well wneh on the local host
but when uploaded on the web server the login control is not validating the users of the database
also i have added a CAPTCHA control
and that is giving an error that the cobe u entered is not matching
u can even check this error
My Url is http://www.webgrowthengine.com
click on the login button
user name: "aaaa" (Excluding the quotes)
password: !@#$%^& (Press shift+ 1234567)
plzhelp me
Nitin
Hi ... hope you can help.
I would like to use the Data Mining Web Controls which ship with the MSSQL2005 Beta 2. The installer (BetaAnalysisServicesSamples.MSI) is supposed to create a new virtual directory and should also create the DataMiningHTMLViewers.dll according to "ReadMe_Data_Mining_Web_Controls.rtf"
But the MSI only creates a few new directories with the source code and a deployment project (DMHTMLViewersSetup.vdproj) which won't open with VS2003. The solution apears to be for VS2005.
How do I install the Web Controls?
RS 2005
I have a matrix item in a report. It is only about 7cm in width in design mode but obviously explodes out to about 30cm in when the report is run as thats the way the query behind it works.
The problem is any control e.g. a chart placed above and to the right of the matrix in design mode gets pushed across to the end of the matrix's width when the report is run, which causes extra pages in the report.
Other controls placed directly above the matrix in design mode hold their position when the report is run, it is only those controls placed further right than the end of the matrix (and above the matrix) in design mode that get pushed across. Why is this, is there a way to fix it?
Thanks
N
After resolving all the installation and configuration related issues, I was able to deploy a couple of projects on my report server. I can see alll folders and reports listed inside the folders from http://<servername>/reports . All works fine except when I run a report, the http://<servername>/Reports/Pages/Report.aspx page does not render report.
This page displays View, Properties, History Subscriptions etc, menu items on the top section of the page. It also displays Home, My Subscriptions, Site Settings, Help etc. links on top right corner of the page. I can also see the bar that has "New subscription" button. But the problem starts from the section below that. It does NOT display the Report navigation bottons (like First page button, Next Page button, previous page button, Last page button, print button etc.) Appears that the icons images for these bottons are missing. And above all, the page does not render report.
IE browser status indicate the following error:
error:'HoevrImagectl161_ctl01_ctl01_ctl06_ctl01' is null or not an object.
The report renders fine via http://<servername>/ReportServer/Pages/ReportViewer.aspx
I may not have explained the problem well here however, if you are interested, I can email you the screenshot of Report.aspx to help you understand the problem.
Any help is appreciated!!!
When a ReportViewer control is used to access a report on a remote SQL Server database, on what ports does the communcation occur? Does the control communicate on on the SQL Server ports of 1433 and 1434 or does it communcate as a web service on port 80 (or 443 for HTPPS)?
View 1 Replies View RelatedHi, i wrote a simple program to access a SQL Server 2005 DB and i use the following connection string: <connectionStrings>
<add name="Alunos" connectionString="Data Source=.;Initial Catalog=ALUNOS;integrated security=true"/>
<add name="Escola" connectionString="Data
Source=.SQLEXPRESS;Initial Catalog=Escola;integrated
security=true"/>
</connectionStrings> It all works fine.Then
i try to create a SQLDataSource object graphically and configure it.
when i choosethe instance and DBi choose Test Connection and it gives
the 'Named Pipes Provider , error 40'. I think i solves this problem
because i googled thisand found a lot of info and i did all that.But
the problem remains.Could it be the a security issue? with the user i´m using to access the DB?Some help on this would be very appreciated.ThanksSP
NET 2.0
I am using Visual Studio Express 2005 for database web developement.
I have created a database with 5 tables. Two are associative tables.
They are
SoftwarePK SoftwareID Title
SoftwareSolutionFK SoftwareIDFK SolutionID
SolutionPK SolutionID Title
CategorySolutionFK CategoryFK Solution
Category
PK Category Title
Criteria for a search with three sources of input into a SqlDataSource attached to a FormView for paged out.
The following are the Search Criteria input sources:1) ListBox in Multiple Selection Mode2) CheckBoxList with Mutiple checks posible2) TextBox with key word search in Title.
Each Solution has 0 or many Categories and 0 or many Software.
When the records are entered in the database, the associative information for Categories and Software are populated to filter thereturned values.
In NET 1.1, I would create a search string like the following in code behind by looping through the CheckBoxList and ListBox finally adding the TextBox:
SELECT Solution.SolutionID, Solution.Title FROM SolutionWHERE Solution.SolutionID IN ('2','3','5') AND Solution.Title LIKE '%Math%'
I am unable to update the SelectCommand in the ASPX page.
However, when I use the I have used theSystem.Web.UI.WebControls.SqlDataSources"SelectQuery Builder"I receive the following in the Source for ASPX: <asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT Solution.SolutionID, Solution.Title
FROM
Solution INNER JOIN CategorySolution ON Solution.SolutionID = CategorySolution.SolutionID
INNER JOIN SoftwareSolution ON Solution.SolutionID = SoftwareSolution.SolutionID">
<SelectParameters>
<asp:ControlParameter ControlID="CheckBoxList1" DefaultValue="%" Name="CategoryID" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="ListBox1" DefaultValue="%" Name="SoftwareID" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="txtTitleSearch" DefaultValue="%" Name="Title" PropertyName="Text" />
</SelectParameters>
</asp:SqlDataSource> I receive duplicate records and not sure if the code generated accesses the Mutiple Selected values in the CheckBoxList1 and ListBox1.Question: 1) If the SelectQuery generator will not access multiple selected values from the CheckBoxList1, how can I use code behind to replaceSelectCommand in the ASPX page?2) What is the best solution for using the CheckBoxList1, ListBox1, and TextBox for filtering my results? Sample code, references to solutions, corrections on logic, a new approach, how to use the wizard correctly would all be greatly appreciated.3) Can Multiple Selection Controls be use with a SqlDataSource SELECT Command?Thanks for your time,Sincerely,Unhistoric
Thanks for your help.
I'm just getting into ASP.NET 2.0 and started using the SqlDataSource control to declaritively connect to a database. I was wondering if I have two SqlDataSource controls on one page with two select commands querying the same database, will the that create to seperate instances of opening and closing the connection to the database, or will it open the database once, execute both queries, and then close the connection. It seems that if it creates two separate connections, it would still be more efficient to to connect to the database programmatically using ADO.NET. You would only need to make one trip to the database, pull down all of your data, and then close the connection.
Adrian
one of my webpages uses the following sql query to allow the user to search through the database and present the qualifying data in gridview:
SELECT * FROM [Table1] WHERE ([comments] LIKE '%' + ? + '%')
how could i expand this so that the user can also search through the database but instead by searching through another column such as [type]?
thanks in advance
Hi,
I use a filter on a dataview which has uniq rows. I need to bind several fields of the result filtered row to textboxes. Here the code :
protected void Page_Load(object sender, EventArgs e) { string id = Request.QueryString["id"];
if (PreviousPage != null) { SqlDataSource dsPrev = (SqlDataSource)PreviousPage.FindControl("SqlDataSource1");
DataView dv = (DataView)(dsPrev.Select(DataSourceSelectArguments.Empty)); dv.RowFilter = "dr_id='" + id + "' "; dv.RowStateFilter = DataViewRowState.CurrentRows;
txtFirstName.Text = // ??? FirstName Field
txtLastName.Text= // ??? LastName Field
txtAddress.Text= // ??? Address Field } }
I don't know which cod to put in those lines.
On the help of the dataView there is an example that use DataBindings. This example is in the DataView.RowFilter article:
Text1.DataBindings.Add("Text",view,"CompanyName");
The big problem is that I don't have a method or event call 'DataBindings'. I just have 'DataBind' method or dataBinding event and they both don't support the 'Add' method.
So how can I bound those controls to my filtered Dataview field value.
Thanks,
David