HI,
I am using MS SQL database, i am inserting the data (for a table as tbl_emp) and retrive the data from database and i want to display the data in datagrid
at this time another user want to update or delete the data,now i want to stop that user when i am using insertion,how can i do this.
thanx,
sudha.
I have an application that uses Integrated Windows authentication. My Web.config looks like below
<add key="dbconnection" value=" server=XXX;Initial Catalog=XXX;persist security info=False;Integrated Security=SSPI;Pooling=true" />
When users try to access my application, they get the below error:
Execute permission denied on object 'SprocName', database 'DBNAME',Owner,'dbo'
The Only way I could get rid off the error is if I set DBO permissions for the user group on the databse.
Can someone suggest how to set up a security group with the ‘necessary’ permissions on SQL SERVER (ie read,write execute Sproc etc) and not too many extra ones, like DBO.
Thanks,
SQL Server 2005 anomoly?
In SQL Server Management Studio I granted specific permissions to user "A" to do Select, Insert, Update, Delete on Table "B" -
When I logged on as User "A" and attempted the Insert imto table "B" I got the following error:
"Insert Permission Denied on Table B, Database C, Schema dbo"
Is this a problem with the dbo schema?
Then I went back and created a stored proccedure "D" with the exact same Insert statement inside the procedure. I granted User "A" execute permission on the stored procedure "D".
I then logged on as User A and executed Stored Procedure "D". No Problem - stored procedure executed fine with the Insert.
I attempted the Insert statement again - straight SQL - as User "A" and got the same error as above ("Insert Permission Denied.....")
Strange behavior - cannot do a SQL. Insert even though user has permissions but can execute a store procedure with the same Insert statement.
What gives?
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies View Related
I want to list out the pending transaction for transaction replication by publication.
Help needed.
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]
Hi All,
I'd like to remotly stop an instance of SQL Server
but this command does not seem to work....
net stop mssql$<server name> (eg. net stop mssql$prod)
...any ideas? I'll want to start this sql server again too.
David.
Is there any way to stop SQL CLR on database apart from using
sp_configure 'clr enabled', 1
GO
RECONFIGURE
GO
I want to stop this functionality on database...any idea...
Hi
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
Thanks,
Prashant
Hi All I am using SQL server Database in one of my table there is a column which is set to Identity=Yes i.e., The ID is increment by one on every insert and if the insertion failed then the id generated goes off then in the next generation it uses new id ..........EXfirst insertion id=1 then in the second insertion if while adding data to other rows if i get some error then the id 2 is not used and when i correct the error and insert it then id=3? can any one give me the solution for this and NextWhen i delete the datafrom the table see the ids are upto 20 and i delete all the records from the table after insertion of new record the id will be 21plese help me in this
View 3 Replies View RelatedI have these two tables and I cant prevent duplicates.
SEARCH
Item
ItemID
Info
CATEGORYDATA
CategoryID
ItemID
SELECT DISTINCT SEARCH.ItemId, SEARCH.Item, CATEGORYDATA.CategoryId
FROM SEARCH
INNER JOIN CATEGORYDATA
ON SEARCH.ItemID = CATEGORYDATA.ItemID
And I get something like:ItemID Item CategoryID
1 item1 1
3 item3 1
1 item1 2 <---duplicate
1 item1 3 <---duplicate
2 item2 3
4 item4 3
Thanks in advance
I have a snapshot replication is running and now I want to stop the replication for a while. Is it possible to do that? If it is then where I can set to stop it? Please help.
Thanks for Help!
Hello,
Does any one know how I can start and stop the sql services with the net use command?
Thanks,
Anthony
I use EM to handle 2 SQL servers. One I can `stop`; the other I can`t. (except I think I used to be able to do so).
When I select the `stop` I get the following message from EM:
"An error 1051 - (A stop control has bee sent to a service which other running services are dependent on) occurred while performing the service operation on the MSSQLServer service."
How do I track down what this other running service is? How do I stop SQL?
All help greatly appreciated.
Judith
I need to remotely start and stop SQL from another machine from a program or command line. Thanks in advance.
View 1 Replies View RelatedI wanted to remove my Northwind database. But that database is currently used for replication. I'll have to stop the replication first before I can remove it.
So how to stop the replication?
Thanks!
amy
Hi,
Can anybody tell me how to stop the execution of a T-SQL statement at once? I have tried Alt+Break but its taking a long time to stop.Whats the reason?Plz suggest....I am dealing with a database containing 24343000 data.
Joydeep
Hey
I have a statement that has been running great for the past hour but now it will not pull the info any longer and just gives me a null
DECLARE @Text VARCHAR(2000)
SELECT @Text = COALESCE(@Text + '', '') + x.memotext
FROM (SELECT TOP 100 PERCENT memotext FROM customermemoheader WHERE memonumber = 'TERMS' and customernumber = '0009' ORDER BY seqnumber) AS x
SELECT @Text AS MemoText
I have verified in the tables that the info is there by running the select statement from within the (). It has worked for 8000 records and now it no longer works. Any help would be much appreciated.
THanks
I have a performance issue with a Cognos report against SQL Server 2005.
The total running time of the report is 1 minute 15, and using SQL Profiler I found out that 1m13 is spent preparing SQL. Execution and generating the report takes up 2 seconds; no problem there.
The SQL is the same every time I run the report, yet SQL Server spends 1m13 preparing it every single time! I'm no DBA, but as far as I understand that's not what's supposed to happen; once prepared, the SQL should execute quickly every time.
Is there a way to stop SQL from preparing the statement every time?
(Cognos 8 against SQL Server 2005 through OLEDB. Oh, and this query takes about a second when run in EM.)
How do you stop Replication?It is causing blocking. URLs....
View 9 Replies View RelatedHey Guys, I have a question. I know you can put a 'STOP' command in VBA code. Is there something like that for SQL Server Stored Procedures?
View 3 Replies View RelatedHi,I am doing some resource hungry tasks (some extraction and loadingthrough DTS), for which each time the SQL Server Log files gets filledup!Is there any way to stop the logging (like as during restore)?Thanks in advance.-surajit
View 1 Replies View RelatedHi.I need to stop mssql service via command row.How can I do?Tnk,Luca
View 1 Replies View Related
Hello,
i'm desperate! I have a application in my SQL Express and only one database for it. But right now it have 3,97gb, without log file.
i'm already buying a SQL Enterprise to upgrade this, take some days, but my question is: when this size came to 4,00gb my application will be stop working ? my business stop ???
Thanks
Here are some production error messages:
Error: 0xC0047039 at Load work$$MyDataFile from flat file, DTS.Pipeline:
SSIS Error Code DTS_E_THREADCANCELLED.
Thread "WorkThread0" received a shutdown signal and is terminating.
The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Load work$$MyDataFile from flat file, DTS.Pipeline:
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039.
There may be error messages posted before this with more information on why the thread has exited.
I did not request a shutdown!
Someone please give me a global switch to tell SSIS to keep going.
Why should I not load 20,00 records because of one bad record?
I have tediously changed every field on every tool to "Ignore Error".
Why should I still have to do this? I mean why does SSIS default to failure?
Is there some switch I could change in the XML that would change this default behaviour?
The problem with the data in this case: a NewLine character was missing so it looked to the data flow as one very long line.
Hoping for a solution,
IanO
Hi,
In one of my packages, I have a script component to do a transformation and I am inserting the output to table. Within that script component, if the data does not match my requirement, I have to stop the job. For that, I am using 'componentmetadata.fireError' to raise an error. The problem is, now even when an error is raised, the job completes by loading the remaining records and then aborts. But I want to abort the job as soon it raises an error. How to do this?
Thanks.
I create a publication with 1 article with a parameterized filter. Empty table without records. Then i went to create a snapshot through snapshot agent. After snapshot was created, data are inserted with "Insert Into..Select" SQL statement. A total of 20 millions records (10GB) are inserted. When i try to sync with a SQL compact edition, the synchronization % stop at 0 for more than 1 hour. Does that mean it is not working?
Thank you and have a nice day.