I have installed 7.0 on my desktop and I am trying to use the Enterprise Manager. I am trying to register 6.5 servers and keep getting the SQL Server Enterprise Manager message "Warning - The client and server codepages do not match. Some ANSI character mappings may not be possible".
I have been told that I can install 6.5 then 7.0 but it is not available.
Anybody have any solutions?
Thanks in advance,
Ivan
Hi folks,
i'm at a loss as to why i can not register a SQL 6.5 server in SQL 7.0 Enterprise Manager. When i right click the 6.6 group there is no 'New SQL Server Registration...' as you get in the SQL 7.0 group. Highlighting the 6.5 group and clicking the toolbar button (which is actually visible) does nothing either. But, funnily enough when i installed Enterprise Manager another 6.5 server was automatically registered! Even more wierd is the fact that i can connect through OK with the ISQL utility to my 6.5 server (the one i can't register) and query it, fine.
How do i register it in the Console Root? It's definatly 'connectable' just that i can't register the thing! I bet i'm being really stupid (no comments folks!)
Cheers,
Kyle.
*8^)
Hello,
I have a problem that connecting sql serve 2000 name called "CBDATA" connecting into in my local machine Enterprise manger. I have the following information
1. I am the group of fiest domain.
2. My server is group of connectbuilder domain and locating in different place.
3. I added the server IP address in the client network utility alias with TCP/IP port 1433.
4. I try to register in my local machine with IP Address or server name but it getting the error
"SQL Server Registration failed because of the connection failure display below. Do you wish to register anyway?.
Specified SQL Server not found.
ConnectionOpen (Connect()) "
I don't have any problem if I am using the Terminal server to access the server physically.
I have tried to find the solution for this in many website but couldn't able to find any information.
Could you Please help me out regarding this problem.
I have Enterprise Manager version 8.0When I try to register an online databse provided by an ISP I get thefollowing error message:"SQLServer does not exist or access denied[]ConnectionOpen(Connect()"I have tried it many times and checked user name, password, port 1433(as required by ISP), all to no avail.I am running SQL Developer and I have no other versions of SQL or MSDEon my computer,I would be most grateful for any help than anyone can give in solvingthe problem,Best wishes, John Morgan
View 2 Replies View Relatedhelloi am new to sql server and .net programing here is a problem i gotwhile trying to register sql server over internet on sql serverenterprise manager , i open register sql server wizardclick next, gave ip address of the sql server( i want to register) inavailable servers and add it , gave sql authenticationbut got the error"sql server does not exist or access denied coonectionopen(connect())"please advice me how to solve this problemnote: tcp/ip network library is enabled on my server and the client aswelli have also tried this in vb.netDim conect As New SqlConnection("data source =202.154.228.184;net='dbmssocn';database = pmec ; user id = sa;password = sa ")but the same exception is thrownkindly help me solve this problem, i need to solve it badlythanks
View 3 Replies View RelatedWhen Trying to register a SQL Server using Windows Authentication, I get the following error:
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
When I edit the properties and make it SQL Authentication, it works fine. The SQL Server Service is starting up with a domain user account. If that makes any difference. Funny thing is, that my co-worker, can register the SQL Server in his Enterprise Manager using Windows Authentication. We are both Domain Admins and members of the servers local admin group. So, I'm not sure what to do now.
I checked under Security, Logins...and neither of us are listed under there.
Thanks
Hi
I amtrying to register remote database server with my local machine Enterprise Manager. It says server doesnot exist or not available.
I am putting server name,Tcp/Ip, i.p,port in Sql client configuration utility
and then trying to register it with Enterprise Manager.
Pl help me out.
Thanks
Shaurav
Can anyone give me advice on how to register 6.5 servers using SQL 7.0. Every time I try and register a 6.5 servers it fails. I get an error stating that "I must upgraded the 6.5 server or later to be administered by this version of SQL-DMO". I can't upgrade the server to 7.0 because the COTS product that we are using as the front end relies on 6.5. Is there any way to do this? Or do I have to install 6.5 on my workstation as a separate application than 7.0? Someone please help?
View 2 Replies View RelatedHi,
I mistakenly registered a SQL 6.5 server in SQL 7.0. I would like to remove the registration entry, since I often will click it by acident, and it will fire up the SQL 6.5 EM session. However, when I right click on the server and try to select the "Delete SQLServer Registration" from the menu, that option is greyed out. Is there any way I can remove this SQLServer somehow?
Thanks,
Joe
Hi! Just started playing, but when I try to register an active (on the network) 6.5 server in the 7.0 EM I get the message that I must upgrade the 6.5 server...I know in 6.5 I could access 6.0 servers after runnning a script on the 6.0 server, but so far I don`t see anything like this for 7.0. Will I end up having to run 2 versions of EM on a machine (if possible) to access my 6.5/7.0 servers? (I know I won`t be able to do anything fancy, but it is nice (under my 6.5 EM) to be able to manage server activity/db`s from one machine, regardless of them being 6.0 or 6.5!
John
How do I register servers in Enterprise Manager or access them in Query Analyzer in non-trusted domains via TCP/IP? I must administer a number of servers for which I have all the security credentials (IP addresses, Windows Administrator logon and password, sa password).
View 1 Replies View RelatedI need help with a problem that is driving me nuts and should be so easy that it is mindless. The problem is with registering SQL servers in Enterprise Manager.
The network is a routed environment with many subnets. TCP/IP addresses are assigned by DHCP and name resolution is done via WINS. The SQL clients are set to use Named Pipes as the Net-Library. The servers are using standard security. I have the correct sa password. Then I try to register a SQL server. It returns a message that it is unavailable.
The SQL box is visible in Network Neighborhood; is able to be pinged both via machine name and IP address; the msssqlserver service is running on the box. I can register the box using standard security and the same credentials in EM right on the server. Why can't I register it from a client?
Thanks in advance,
Ed
I hope someone can help me with this problem.
I need to replicate some tables from our store servers
to our corporate server. All of them are 6.5, and
the corporate server will subscribe and the stores
will publish. I have registered
all of our stores on the corporate server so that I can
enable them for replication.
The problem is that to be able to register them I had to create
a system DSN for ODBC, but that would only work if I used the
IP addresses. Unfortunately, then when I try to enable them
on the corporate server I get an error stating that name (which
is the IP address) is not a valid object identifier.
In ODBC I did actually use a real name (not an IP) for the
name, a normal description, and the IP is in the Server
field. Is there some way to use an alias? What am I doing wrong?
Hi,
I've SQL 7 running on windows NT 4.0 server.
From my Sql server when I tried to register a remote server in the same office, I couldn't.
When I get the new registration wizard, I could see the server(s) I want to register. But when I finish all the steps in the wizard, it says: Unable to establish client connection.Connection Open(Create File).
I tried using both sql standard and win nt security (logins) but didn't work.
Help please.
Thanks,
Kiran
I'm trying to register a remote OLAP server under OLAP Manager.
After I enter the machine name I get the following:
Errors occurred while connecting to <server>.
Cannot open the following registry key on the server computer (<server>):
SoftwareMicrosoftOLAP ServerServer Connection Info
Do you still want to register this server?
The noticeable thing about this error message is that the registry key is missing the first level (HKEY_....). Has anyone been able to register a remote server? I can run OLAP Manager on the server without a problem. I just uninstalled and reinstalled OLAP services on the server and my desktop.
There is a registry key with this path under HKEY_LOCAL_MACHINE on the server.
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies View RelatedIF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies View RelatedHi
has anyone used this tool to upload sql databases to a web host
i'm struggling
cheers!!!
Adrian
I installed SQL Server MSDE 2000 but I can't find how to start it. Does this package include an Enterprise Manager or not? I thought that maybe it was a standard XP Pro feature. I had no problem finding it in W2000 Pro.
View 1 Replies View RelatedWhen I open databases, there is nothing there - not even Master, Model, Temp, Pubs, etc.
When I open the query analyzer, however, they all appear in the drop down.
What is up with that? and how can I remedy?
OP sys:Win98
SQL Server 7
Has anyone encountered this error: When you are in Enterprise manager and you select a database then the tables tab and then you select a table and go to open table- select all rows, I get an error--An unexpected error happened during this operation-Query Designer encountered a query error! Please let me know if you have seen this. Also, when I access this from one networked computer I get the same error, then when I access it from another I do not!! The servers are interacting with Pivotal. The one that works does not!!
View 3 Replies View RelatedHi all,
I have SQL 7.0 desktop addition installed on my local win NT workstation. I am able to connect to my local server using Quary Analyser but when i am trying to connect using EM, i am not able to connect. I am receiveing the following error message.
__________________________________________________ ___________________________
A conncetion could not be established to "servername" - Specified SQL Server not found. ConnectionOpen(CreateFile()).
Please verify SQL server is running and check your SQL Server registration properties(by right clicking "servername" node) and try again.
__________________________________________________ ___________________________
I have tried as said in the error message and also tried connecting with "sa" but its not working. I can see that the server is running and i am able to connect through QA.
any help is highly appriciated.
We can no longer open tables in EM. The error message is;
An unexpected error happened during this operation
[Query] - Query Designer encountered a Query error:
Unspecified error
The tables are fine - can access them other ways.It looks as if the fault is in the script used by EM. Anyway to clear this ??
I am fairly new sql dba in a company and I am sure Enterprise Manager is installed on PC's and it shouldn't. Is there a way of finding out other then visiting each workstation. Thanks in advance..
View 1 Replies View RelatedI am considering upsizing my Access 2000 DB to a SQL 7 server. I was told that having SQL 7 Enterprise Manager is highly prefferd but not essential as I can maintain the upsized DB with Access 2000. The only way that I have been able to find JUST enterprise manager seems to be with purchasing the whole SQL 7 program for $1300! Microsoft cannot be that cruel, that you have to buy the whole program just for Enterprise Manager!
My questions are:
Can I download just MS SQL 7 Enterprise Manager anywhere for a reasonable fee or free?
and
if not, can I continue to use Access 2000 to maintain the SQL 7 upsized DB?
I have access to a SQL 7 server via my ISP Hosting account. I know Enterprise manager comes with the server software, but how can I get a copy of JUST Enterprise Manager?
JD
Is non-SA account able to view the SQL Enterprise Manager?
Thanks in advance!
Plum
Is it possible to administer both 6.5 and 7.0 databases from the same SQL Enterprise Manager? I have read that you cannot do this because the 7.0 "plug-in" to the MMC wont work with 6.5 databases.
View 2 Replies View RelatedWe had database corruption and cannot access the Enterprise Manager. DBCC returned errors 9000 to 9999 which I can't get any suggestions on how to handle from BOL. Any ideas!!!!! Thanks.
View 4 Replies View RelatedHi,
I would like to know if we can present users to access details database information about the databases on a server through Enterprise Manager.
If you create a SQL login and do NOT give it access to any database, if someone logons on your server with enterprise manager, even though he does not have access to any database, he will still see the list of all database on your servers plus tons of sensitive information like database owner.
Is is possible to limit enterprise manager to only view information about database that the user has access to?
Thanks
Mark
How can I force users of Ent Manager 6.5 to enter a name/password when connecting to a server that has been registered? I dont want to use the sa name and password so that anyone could use my workstation to access our servers.
View 2 Replies View RelatedDoes anyone know how to turn off or disable the auto discovery for Enterprise Manager. Apparently our Network group is complaining that Enterprise Manager is generating noise on the network, it is not signifcant in volume but they complain it impacts there ability to detect hacking attempts on our network because it causes some false positives. I generally keep Enterprise Manager running because I will always have some manual job running from it and we have so many servers it takes awhile for them to all load when I first fire it up.
Thomas
Hello guys,
Just wondering if i can use CPU, Memory usage, I/O or wait events for SQL trace. I am having difficulty in finding theses events on SQL trace.
Also is it possible to show the SQL trace file output in graphical format.
Thanks