I am try to build a query which only matches whole words and so far I've got this.
Code:
SELECT *
FROM tblSearchWords
WHERE CorrectSpelling LIKE '%[^a-zA-Z0-9]blah[^a-zA-Z0-9]%'
This will return rows which contain the string 'blah' without any numeric or alphanumeric characters beside it. However it doesn't return the rows where 'blah' is either at the start or end of the string as it expects any character except a-zA-Z0-0.
Is there any way to accept string when there is nothing on either side as well?
I have a table in which one of the column name is "NAME". I have to write query in which column is not null and if there is something then check for 'trust' or 'trustee' in the string. and if found don't pull that record. skip it
HiI'm looking to return rows from a table where a column is LIKE a keyword. This is my current code:SELECT DISTINCT business_name FROM Table WHERE business_name LIKE @keyword + '%' ORDER BY business_name ASCThe problem with this is that if a business is called "The White Ship Inn", and the keyword to match is "White Ship" it will not match. If i put another wild card in front of @keyword then this finds too many matches - i need it to match against columns which either start with the keyword, or have a whitespace in front of them. Is there some kind of T-Sql i can use or will i have to go down the regex route (using this (http://www.codeproject.com/KB/mcpp/xpregex.aspx)) ?cheers
Does SqlServer support Regular expression? I want to know if it's avilable or not... And if it's not available, I want to know any other efficient way to validate string.. manipulating Regular expression style validation.
I need to remove all the [ and ] in every sql stmt where they are usedto close encircling numeric value, fyi, all these sql stmt areconverted from an Access db. For instance,select *from XYZtblwhere fieldA = [1] or fieldA = [2] or fieldA = [3]to beselect *from XYZtblwhere fieldA = 1 or fieldA = 2 or fieldA = 3-- and of course I'd have written in as follows, but that's not-- the pointselect *from XYZtblwhere fieldA IN (1,2,3)Thanks.
Hi,I'm not a big friend of MSSQL, but I have to do one query I've done formySQL.But I don't know how...I have to select 'user' from 'db' where first letter is E or N, second is Bor 0 and after that there are 6 or 7 digits I know.How can I do that?In mySQL it would be something like:SELECT * FROM `table` WHERE `account` regexp '^[EN][B0]123456$' ORDER BY`Id`;Thanks in advance,Martin
I am trying to exclude all strings that has 'a' inside (I havesimplified the actual problem)select 1where 'bb b a dfg' like '%[^a]%'However, the above does not work. By the way, I can not use 'not like'such as:select 1where 'bb b a dfg' not like '%a%'Although the above will work but the idea is that I have to use 'like'and not 'not like'. This is partly because I have to exclude rows froman exclusion table (a table that has many rows that will be excluded).Actually I want to include all srings that has lets say // in it usinga regular expression. I would like to write it as (I am sure it willnot work):select 1where column like '%[^/][^/]%'That should exclude strings like: 'aaa // aa aa' or 'bb bbb // bb' etcand include strings like: 'aaa aa aa' or 'bb aa nn' etcIs there any way to write a regular expression to do it? Otherrwise Ihave to solve this problem without using regular expressions in theexclusion table.Thanks.
I have a table which stores a big chunk of html text, which I have to search for and replace some strings. How can I write a query that makes use of regular expressions to do the following:
Below is a block of example text ====================================================================== " src="http://aaaa/bbbb/cccc.nsf/blind%2010x10.gif?OpenImageResource" width=10> <img height=10 alt="" src="http://aaaa/bbbb/cccc.nsf/blind%2010x10.gif?OpenImageResource" width=10><img height=11 alt="" http://aaaa/bbbb/cccc.nsf/blablablabla?OpenDocument src="http://aaaa/bbbb/cccc.ns http://aaaa/bbbb/cccc.nsf/d8d4f0dfa09ba71142256cc50040ee51/ee9b4493dac727be422571c30027df61? OpenDocument" target=_self>
Now I want to search and replace the string that is highlighted in red with something like "FOUND" The below string is what I want to search for - I will used PATINDEX on the string below to find the start index of the string in the body, and then I will add on 114 to the when doing a replace:
what would the regular expression be and how does one type it in the query? I tried something like the below but it does not work, please advise ..... [a-z][0-9]{32} %/% [a-z][0-9]{32}
I have as csv-file wich I import into an SQL Server table. Now I want to do some checks on it. I use a conditional split to direct data to the other tables (1 table for the correct data, 1 table for the rejected data).
Is it possible to use a regular expression in a case in a conditional split to check if a columns has the right format?
Hello everyone I'm new with Reporting services, so my problem is that i want to show what filter the user enter exemple : Data between 12/1/2007 and 4/20/2008
I did all that with this statement :
= "Briefing between "+ Parameters!FromDate.Value+ " and " +Parameters!ToDate.Value
but when i want to dispaly another filter it doesn't show up like this :
= "Briefing between "+ Parameters!FromDate.Value+ " and " +Parameters!ToDate.Value IIf( Parameters!Company.Value!="",Parameters!Company.Value,"")
I am sorry i have to jump up into Sql reporting service without a good skills on expressions
Using VWD I have created a search feature using the LIKE clause. The filter expression on my SQLDataSource allows the user to search the Description field of a database and yield a result that contains the exact word or phrase entered into a textbox. Assuming that the user enters more than one word, my understanding is that the search result is limited to database rows that contain the EXACT phrase (such as found in an advanced Google search using the “with the exact phrase” option). The current filter expression is: Description LIKE '%{0}%' For example, if “John Smith” is typed into the search textbox, the results will include a row with: 1. “John Smith is my neighbor” but NOT a row with 2. “John is my neighbor. His last name is Smith”. How does one modify the filter expression so that the search result is like the Google “with all the words” search option, where the search results are limited to records in which all the words typed into the textbox are present but not necessarily in the EXACT continuous order? In the example above, BOTH Descriptions would be returned in the search results when “John Smith” in typed into the search textbox. Thanks for any help you can provide in helping me refine my search options.
Thanks in advanace for taking the time to read this post. I am using MSSQL 2005 and have created a function that allows me to use regular expressions in my SQL queries. My question is I have a pattern buried in a field of misc data that I need to pull out just that pattern and discard the rest of the data. Here is the Regular Expression I am using select field1 from table1 where dbo.RegExMatch (field1,'[a-zA-Z]{4}[0-9]{6}[a-zA-Z]{2,4}')=1 This returns all values in the field that match the expression. What I want to do now is remove all data from the field on the left and right of the expression that does not match the expression. How would I accomplish this without reading through the 200k+ records and writing rules for every exception I run across? so I could have Gar b/a ge 'THE GOOD DATA' m/or1 ba4d da....ta. All I want to do is return 'THE GOOD DATA'
Error 3 Error loading MLS_AZ_PHX.dtsx: The result of the expression ""C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
Directly using C:sql_working_directoryMLSAZPhoenixDocsArmls_Schema Updated 020107.xls as connectionString works
However - I'm trying to deploy the package - and trying to use expression: @[User::DIR_WORKING] + "\Docs\Armls_Schema Updated 020107.xls" which causes the same error to occur
(Same error with other Excel source also: Error 5 Error loading MLS_AZ_PHX.dtsx: The result of the expression "@[User::DIR_WORKING] + "\Docs\Armls_SchoolCodesJuly06.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1 )
I have created 1 report with 2 datasets. This report is attached to the 1st dataset.For example,1st one is "Smallappliances", 2nd is "Largeappliances".
I created a tablix and, the 1st column extracts Total sales per Sales person between 2 dates from 1st dataset (Small appliances). I used running values expression and it works fine.
Now, I would like to add another column that extracts Total sales per sales person between 2 dates from 2nd dataset (Large appliances). I am aware that I need to use Lookup expression and it is giving me the single sales value rather than the total sales values. So, I wanted to use RunningValue expression within lookup table to get total sales for large appliances.
This is the lookup expression that I added for the 2nd column.
I get this error when I preview the report.An error occurred during local report processing.The definition of the report is invalid.An unexpected error occurred in report processing.
A developer I need to support believes that the Enterprise Edition is required to take advantage of a dual processor Compaq ProLiant 3000. This machine is not a quad box, just a standard MPS architecture with a single CPU installed.
I recall that the standard SQL 6.5 build will fully utilize a standard MPS DP system and that Enterprise is required only for 4-way, 8-way and n-way boxes such as the Tandems.
I have a crappy old database that has an email field with a lot of bad data, and I need to use SSIS to extract a list of names & email addresses.
I have an OLE DB Source set up to pull the relevant columns out of the database. Is there a way that I could setup a Regular Expression based filter to disregard any rows where my email Regex does not match the value of the email column?
i wrote a little function that is basically supposed to give me a match of a regular expression in C#. i tested it out in VS05 and it seems to work fine. It hits the fan when i try it on SQL Query analyzer once deployed. Anyone have any idea why?
here is the C# class that I deploy to a db using VS05.
Basically i have a teststring that looks like abc_xxx_nnndef. xxx and nn are both numbers, and im using the pattern _\d{3}_ to test it out in SQL (i need the numbers between '_' and '_'). But it never even proceeds past the if statement in SQL i think. here is the basic SQL that i use to test the above function:
use northwind
go
declare @teststring varchar(50),
@pattern varchar(10),
@out varchar(50)
set @teststring = 'dw_012_34.ext'
set @pattern = '_\d{3}_'
set @out = dbo.RegExMatch(@pattern, @teststring )
select @teststring
select @pattern
select @out
Anyone have any suggestions as to why it works in VS 05 when I use it in a C# program, but fails on the SQL version?
HiI have a large table with allot of data in it, Im trying to find the correct SQL statement to select all the records that do not start with a letter or a number.So some records may start with a '~' and a few '$' and even some '?'. So I would like a statement that would select all of these while leaving out any records that start with anything else, such as numbers or letters.And on a similar theme, Im also trying to select all records that start with a number. Ive been using the "select blah from blah where LIKE 'a%'" for each letter and ive tried to have a play and search around that statement.... Today I was told to use a regex within my 'SELECT' statement, but I had never heard of this being done before... so I done a number of searches on Google and although I found references, I didnt actually find any examples. So when I tried to put something together I kept getting errors. Ive used regular expressions before so theres no problem writing the expression that I need, however Ive no idea how to implement it into a SELECT statement.
If someone could please show me an example of the structure/syntax of an sql select query that contains a regex then I would be most appreciative! :)
I don't like the fact that any user I create has access to system tables inthe Master databases and the ability to issue 'sp_who' plus God knows whatother system stored procs.Is there a white paper or a script to lock down a user so that they do nothave this broad access without breaking their regular ability to run theirown queries against their own databases? I would like them to be a regularuser without the ability to snoop around in my SQL Server.--John Dalberg
Is it possible to use the REPLACE function in SQL Server 2000 so thatit returns a string containing only alpha-numeric characters (muchlike using regular expressions)?Thank you in advance for any suggestion.Darren.
Someone posted on a thread that you can use VB (or C#) to write Regular Expressions for SQL Server 2005. I know how to write RegEx in VB, so can someone point me to a reference which explains how to use them in / with SQL2005? Or, can someone explain how?
I am running PHP with SQL Server 2005. I have [bold] in some of the values in my result set, which needs to be striped out. I had a function in SQL Server2000 that did that, but the same function does not work in SQL Server2005. Any dieas?
Hi, I want to run a stored procedure automatically at regular intervals.The time duration is given by me as input details.for example i will give the date and i should send email to some recipients just one day before the given date.I want this to be done in sql stored procedures.
Label3.Text = command4.Parameters["@UserName"].Value.ToString(); }Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 48: Line 49: conn.Open(); Line 50: command4.ExecuteReader(); Line 51: conn.Close(); and here is my stored procedure ALTER PROCEDURE dbo.myStoredProcedure --
(@ProductID int, @UserName varchar(255) OUTPUT)
AS
SET @UserName = (SELECT UserId FROM Products WHERE ProductID = @ProductID) what is wrong? i never seen that error and i don't know from where could it came from please help me, thanks
I created a query which suppose to run every 2 weeks. I know how to schedule a job, my question is how to get the query result into a text or excel file. If I need to use DTS package, please give me a step by step explanation how to move the result into text file and how to email this file.
