Reinstalling Sql 2005
Oct 25, 2006
please ... really need some guidance...
I have removed the old and reinstalled SQL server 2005 standard...
Getting the following message:
Your OS doesn't meet Service pack levels requirements
for this SQL server releaseSo I installed Microsoft SQL Server 2005 Service Pack 1 (SP1)
Getting the following message: This machine does not have a product that matches this installation package.
I have Windows XP Professional 2002 32-bit (Dell), Windows XP Service Pack 2, IIS, NET Framework 2.0., 13GB , processor intel 1,5 GHz, 256MB RAM
View 3 Replies
ADVERTISEMENT
Dec 8, 1999
I understand that you must sp_detach_db and sp_attach_db to move databases to a new server. What if you want to reinstall SQL 7.0 to a different drive on the same server? My situation is this:
We have C:, D:, and E: drives. I accidentally installed SQL 7 on the C: drive instead of the D: drive. I need to reinstall on D: and I need the data. Any suggestions?
Alan
View 1 Replies
View Related
Apr 10, 2007
I have sucessfully applied this patch but Automatic updates then down loads it again and agian...
I have applied it more than once now but it keeps saying that the update is ready to install.
I assume that I do not have to reinstall it again so how can I stop AU downloding it.
View 6 Replies
View Related
Sep 26, 2006
so i uninstalled reporting services and rebooted
now when i run setup it doesnt even ask me for any options to fill out, it just runs for a minute and says done, but it doesn't really install anything (IIS sites, DB, etc...)
i deleted the DBs, the IIS sites, and the files left over. i did everything except delete stuff in the registry
what do i have to do to get it to reinstall from scratch?
i tried using the .ini file and using the command line utility with no luck
View 6 Replies
View Related
Oct 12, 2006
Hi, I uninstalled Sql reporting services through Add/Remove Programs, now i'm trying to install it back but SQL Setup not allowing me to do this as all the checkboxes to select components to install are disabled. I'v tried both running via Add/Remove programs and directly running SQL setup exe. can u guys direct me to something?
regards
faraz
View 2 Replies
View Related
Aug 16, 2007
I installed SQL Server Express and uninstalled it through the control panel add/remove programs. When I try to reinstall is I get an error message that says it is already installed. I'm having the same problem with the toolkit. I saw a post describing a similar problem and tried reinstalling it through the Add Programs button but got the same result. The only SQL programs I see in Add/Remove Programs are MSFT SQL Server Native Client and MSFT SQL Server Setup Support Files (English). I tried to get to the change button on the former but it just removed the entry. How can I tidy things up so I can reinstall it? I'm running XP second edition.
View 4 Replies
View Related
Nov 12, 2007
Hello,
I've got a weird problem that started today on our SQL server at work. Apparently the transaction logs filled up for one DB, and SQL server decided to create 230 gb of errors on the subject, filling my D: drive. Well, I had no problem deleting the error logs and truncating the transaction logs, but my Enterprise Manager MMC will no longer function.
Search results turned up a fix that worked for most people, but not for me. So I'm pretty sure I've got no choice but to reinstall over-the-top. But, will this cause any loss of existing databases (obviously back them up first), users/security, and scheduled tasks (db backups, etc)?
I'd like to do minimal damage to this thing because there are several DB's set up from before my time, and I don't have time to manage this thing completely (as you might have guessed, no one really manages things here). Any help is appreciated.
View 4 Replies
View Related
Oct 30, 2007
How do you reinstalling ODBC drivers in vista business?
I have installed SQL 2005 Express & SQL Server management Studio Express, with SP2
However, the required driver "SQL Server" is not showing up in the list when trying to add a datasource in System DSN.
Can someone help? please.
Regards
Solway
View 6 Replies
View Related
Jun 17, 2015
I have a local instance of SQL 2012 express,
Somehow my admin privileges have been lost, and the sa password is not Password123.
Is there anyway to reset this password without re-installing SQL server.
View 1 Replies
View Related
Feb 27, 2008
I was having some trouble with the DTS Wizard and so I thought I'd just reinstall the whole MSSM. I used remove programs, rebooted my Vista computer and am trying to reinstall the Server Express Toolkit. It tells me that MSSM already exists on my computer (which it doesn't).
The actual screen reads:
Existing components
The following components that you chose to install are already installed on the machine.
Grayed out -- Workstation components and development tools 9.2.3042.00
How do I reinstall MSSM now? It's gone from my computer.
Thanks!
View 3 Replies
View Related
Apr 27, 2007
Hello all...
I am working on a project that contains several databases in SQL and many settings. The problem I am encountering is that I want to be able to update the program for all my customers. That is no problem.
The problem I am meeting is where, when the program is updated, all the settings and all the information in the databases reverts to the default values, or the values that were compiled with the new update.
I want to be able to update their program without deleting all the settings they have.
Thanks,
Andreas Renberg
View 1 Replies
View Related
May 27, 2000
I am trying to change the computer name of a machine running MSDE but I get an error when SQL Server starts. With regular SQL when I change the name of a computer I re-run setup and setup fixes this problem. MSDE can only be installed from unattended mode so I can’t rerun setup and fix the problem.
My question is "How do I change the name of a computer running MSDE with out reinstalling MSDE"
View 1 Replies
View Related
Mar 11, 2004
Hi
I have another question : 1) Restoring SQL Server Databases after uninstalling and reinstalling SQL Server.
Two days ago there was some problem with Norton Antivirus, so Windows 98 restored itself to a previous state. The SQL Server name was not available when I tried to start again, so I had to uninstall and reinstall SQL Server. I started a new Database just a week before this happened (the change from Access to SQL Server as I stated in the other thread http://www.dbforums.com/showthread.php?threadid=987880) and after reinstallation I could not access the Database any more - even while it is in the Data directory. I did not have any backup to restore from - I just started creating tables, so there was only the Log file created and the MDF database file. I tried to import it for a while to the new server, but as the database is not shown in the new server, it was unable to import like I hoped. So how do you restore it back to SQL Server when you have no backup and only the (undamaged) MDF database file if you only have one server? I had to recreate the Database from scratch again - I don't want it to happen again.
Regards
Corné
View 4 Replies
View Related
Mar 15, 2008
Hi,
I have reinstalled Office 2007 (to changre the license key)
after this, the data mining excel add-in failed to load.
the "COM add-ins" displays: "not loaded. a runtime error occurred during the loading"
reinstalling the add-in doesn't solve the problem
installing the 2008 version don't solve the issue too.
There is no other information, what can I do to solve the issue?
thanks.
View 3 Replies
View Related
Aug 8, 2006
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
View 11 Replies
View Related
Apr 10, 2008
First of all I am planning to install sql 2005 standard and sql standard sp2
on vista ultimate professional using vs 2008 pro
I have some questions about installing sql 2005 what is the best way to install sql 2005 on
vista My article I got this from ms 403393 (upgrading sql standard 2005 to sql standard 2005sp2)
1 sql standard .(shortcut right click from cd/dvd not possible) I have heard command prompt start menu, click cmd
type run D: cd/dvd exe
From a wizard (sql sp2)
2. sql standard sp2
a. upgrade using a wizard
b. open a command prompt (not sure if right click is best option)
install dvd media example dqlserver2005sp2-kb921896-exe SKUUPGRADE=1(is run as administrator option on media)
do I type run or what do I type ?
c. go to system configuration page(where is this) you should see a single warnining you need to install
sp2, the edition should say success if it does not please reapply
d. on the registration page please enter your registeration number
e. on the comments to install please enter database services, reporting services
workstation components, books online and development tools( I wish to install
all components)
f. on the instance page click default instance(default install)
g. finish rest of wizard
h. apply sql sp2
I also have of seperate question of upgrading sql from vista using a Configuring local admin account
account (configuring administration from a wizard-will this notify
me by default) I do not want my administrative priviledges elevated.
I will be using default configurations for my installations.........
I often wish there would a nice picture examples of doing this
Please help
View 5 Replies
View Related
Jan 15, 2008
I have a problem regarding forwarding 'n number of parameters' from Visual Studio 2005 using VB to SQL-Server 2005 stored procedure.I have to save N number of rows in my stored procedure as a transaction. If all rows are not saved successfully, I have to roll-back else update some other table also after that. I am unable to handle - How to send variable number of parameters from Visual Stduio to Sql - Server ? My requirement is to use the SQL-Stored Procedure to store all the rows in the base table and related tables and then update one another table based on the updations done. Please Help .....
View 1 Replies
View Related
Oct 22, 2007
I am trying to import Access reports using Visual Studio 2005 and Access 2007. SQL Server 2005 with Reporting Services is also installed. I select Reports in the Solution Explorer and then Import Reports... Microsoft Access and browse to my Access database. After I select the database I see it open briefly as if it is trying to import the reports but then Access quickly closes and a error pops up: "You already have the database open." I have checked and double checked and the database is not open. I have even tried several different databases and the same errror occurs. Any help would be greatly appreciated.
View 1 Replies
View Related
Sep 25, 2007
We have a large number of clients attempting to replicate two publications on 2005 Express databases (2 publications subscribed to the one subscriber database) with our 2005 Server (9.00.3042.00 SP2 Standard Edition) and experiencing two significant problems:
1) Users experience the following message:
The Merge Agent failed after detecting that retention-based metadata cleanup has deleted metadata at the Subscriber for changes not yet sent to the Publisher. You must reinitialize the subscription (without upload).
This problem should not apparently occur with SQL Server 2005 (or 2005 Express) instances with SP2 applied. All clients experiencing this problem have SP2 installed as does our Server and the retention period is 30 days. The subscribers have been replicating well under that.
2) Replications never succeed after appearing to replicate/loop around for hours
This issue is the most critical as we have clients who have been installed and re-installed with new instances of SQL Server 2005 Express, new empty databases (on subscriber before snapshot extraction), and using fresh snapshots (less than an few hours old) which cannot successfully replicate.
Interestingly there is at least 1 instance where several computers are subscribed and successfully replicating the same database as another where replication refuses to succeed.
To test we have taken a republished database from another 2005 Server which is working fine and restored it to the same server as the one holding the database with which we are experiencing problems and subscribed to it. This test worked fine and replication of both publications went through fast and repeatedly without showing any signs of problem.
This indicates that the problem is perhaps data related as it appears localised to that database.
Below are two screenshots which may assist.
Screenshot 1 Shows that on the server side the replication attempts look like they are succeeding despite the fact that the subscriber end does not indicate success. Also the history indicates the the subscription has spent all it's time initialising and not merging any changes.
Screenshot 2 Shows a rogue process which has appears on many of the problem child subscribers. It shows a process running with no end time even though the job indicates failure in the message and even though other replication attempts appear to have succeeded after it. This process stays in the history showing that it is running even when I can find no corresponding process for it.
Can anyone suggest a further course of action/further testing/further information required which may assist?
This is extremely urgent and any assistance would be greatly appreciated!
Thanks in advance!
Scott
View 5 Replies
View Related
Jan 24, 2007
Hi,
Is there any way to measure bandwith usage during merge replication between sql server 2005 and sql server mobile 2005 running on a cradled wm5 mobile device.
Attaching the windows performance monitor to the network connection established over usb would work although I was wondering if there was something specific for this case integrated into Sql server 2005 / sql server mobile 2005 / Sql server management studio / third party tools that i could use ?
thnx,
pdns.
View 4 Replies
View Related
Jan 29, 2008
Hi,
I have created a database using VB Express 2005 express edition and I have created number of tables and SP's etc.
I am trying to use the database diagram tool but I get an error stating that the database doesn't have a valid dbo. I say yes to the prompt about making myself a valid dbo but I then get a message stating that I do not have permissions to imprersonate the dbo.
How do I overocome this issue?
Thanks
Bill
View 4 Replies
View Related
Jul 11, 2007
Hello everybody!
I hope that someone could help me.
I have a problem when i start sincronyzing with the emulator of MSVS2005 to SQL2005 in Windows Vista. I have the same program in the emulator, but sincronyzing with windows XP Pro and no problem...
I configure the connection to use the IUSR.
The source code that i use:
repl.InternetUrl = @"http://laptop/SQLMobileIIS/sqlcesa30.dll";
repl.Publisher = @"laptop";
repl.PublisherDatabase = @"database";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"Pubdatabase";
repl.Subscriber = @"SQLMobile";
repl.SubscriberConnectionString = @"Data Source='" + nomeFicheiroBD + "';Password='3409'";
The error that returns is:
"Failure to connect to SQLServer with provided connection information. SQL Server does not exist, access is denied because the IIS user is not a valid user on the SQL Server, or the password is incorrect"
Does anybody knows what i can do?
HELP I NEED SOMEBODY TO HELP!
Thanks!
View 1 Replies
View Related
Sep 7, 2007
Is it possible to parm in a value to a SSIS
in my SSIS i have a variable;
Name : FileName
Scope : PackageName
Type : String
Value : ""
I have tried adding the following code in my vb.net project ;
pkg.Variables("filename").Value = "C: emp estfile.001"
pkg.execute()
but come up with the following error
A first chance exception of type 'System.MissingMemberException' occurred in Microsoft.VisualBasic.dll
Public member 'Variables' on type 'IDTSPackage90' not found.
can anyone help ?
View 11 Replies
View Related
Feb 2, 2007
I am update/inserting records threw a web form in vb.net. I need to insert 'NULL' into my microsoft sql server database. I am not talking about the below line of code where website is the name of my paramater. If i do that it will just place a blank into that field in the database. If i dont enter anything into that textbox I want it to to say NULL in that field. So if I go into the actual table in the SQL Server Management Studio and look at the website field of the recored I just added or updated and did not type anything into the web site textbox it needs to say NULL. I also tried the second line of code but that places a single quote in front and behind NULL. So the field will have the value 'NULL'.
website.value = txtwebsite.text.tostirng
if txtwebsite.text ="" then
website.value ="NULL"
end if
The reason why I need the NULL there is because I bind the website filed to a hyperlink template in a gridview. The actual text of the hyperlink is bound to PAYER which is a name of a insurance payer but the navigateto is bound to the website field. If i do not enter any data into the website field and it stays as NULL, then when my gridview is loaded, payers that dont have a website will not be underlined and user wont have the option to click on them since there is no value for the navigateto. But if i use my form to update/add a payer and leave the website textbox blank in puts a blank into that field in my database and when it loads that new row into the gridview the PAYER is underlined and u can click on it but it will just take u to the web site is unavailable page. So is there anyway to actaull have NULL placed into a filed and not just blank space
View 3 Replies
View Related
Jan 16, 2008
I am out of brain cells. I can not figure out how to upgrade instances of sql express to sql 2005 or even add an instance of sql 2005. I have installed/upgraded everything else (SSMS, etc.) to SQL 2005.
I am dazed and confused. I don't even know where to start in explaining what I have tried and done. I have 303 log files going back to 3/27/2007 from various attempts.
Where do I start in figuring this debacle out???
View 7 Replies
View Related
May 30, 2008
Just installed SQL Server 2005 and tested my old VS 2005 ASPnet websites, which were connected toSQL Server 2000 databases before. All my websites were created for local HTTP applications, coded with a connection string with User ID and Password. The SQL Server 2000 was configured as mixed authentication (i.e. with User ID and Password). These websites worked very well with SQL Server 2000 database server.Testing my old VS 2005 websites with SQL Server 2005 database, showed a 'Login failed for a User ''.' error msgalthough the 'Test Connection' on VS 2005 design showed a perfect query for e.g. a GridView control. I have assured that the UserID/Password were correct for Management Studio Security object'slogin and Database Security's user. The server instance was configured with mixed authentication mode. One thing I am not sure of is, when clicking the Management Studio icon, a Connection dialog showed up, asking for a Windows or MIxed authentication? I just stayed with the Windows authentication. What does the authenticationmode have anything to do with the VS 2005 website connection? Should I change to mixed authetnication mode?TIA,Jeffrey
View 3 Replies
View Related
Jan 16, 2007
Hi All,
Parameter passing in SSIS 2005 sometimes appears to be a cumbursome task. I have been digging into this topic for quite some time and here i note down some simple steps to demonstrate parameter passing at Package level.
(1) Create a SSIS project using Business Intelligence 2005 Or VS 2005.
(2) Create datasource (.ds) and Data Source View as required.
(3) A default SSIS Package by the name Package.dtsx is created. Double click this and you are shown tabs for Control Flow, Data Flow, Event Handlers, Package Explorer. On the Control Flow, drap and drop Execute SQL Task from Control Flow Items in the toolbar.
(4) Lets now create a variable at Package level. Right click anywhere in the control flow box (not on the Task created in Step 3 above). Click on the Variables on the context menu displayed. Variables window appears on the left of the screen. Click the Add Variable box in this window to create a variable. Name it var1 (or whatever you may like), Scope as Package, DataType as String and Value as MyValue. This is only the default value.
(5) Now let us edit the SQL Task created in Step 3. Double on it, on the General tab you can change its Name, Description. Set ResultSet as None. We shall proceed to execute a stored procedure by name MySPName and pass it a parameter. Set ConnectionType as OLE DB. Select the connection you creates in step 2. Set SQLSourceType as Direct input. SQLStatement as MySPName ? . Note the ? mark after the name of the stored procedure. This is important to accept the variable value (var1) created in Step 4.
(6) Select Parameter Mapping tab now. Click on Add button. Select the Variable Name as User::var1. This is the user created variable of Step 4. Select Direction as Input, DataType as Varchar and Parameter Name as @var1. Click on OK now.
(7) This sets up the basic of parameter passing. Compile the project to verify everything works. Right Click on the SQL Task and select Execute Task. This will execute the package taking default value of the variable. This can be used along with dtexec command with /set option to pass the parameter at command prompt.
View 5 Replies
View Related
Jul 26, 2007
Hi,
I have a central database server that is runnning on SQL 2005 standard edition and Windows server 2003 standard as OS.
I realise that I can use SQL statements to encrypt and decrypt the data inside the standard SQL.
However, how do I read and write the data via an web application coded in C#.net and is also running on the same machine?
Another issue is, I need to replicate some of the data in this SQL standard over to a SQL mobile running on a mobile device running on Windows CE 5.0.
The mobile device also needs to read and write data to the encrypted data via a C#.net application.
Question is, with all these requirements to be met, can I use AES? I know that AES is not available on Windows XP and Windows Server 2000 and I cant find AES in the .net compact framework.
how do i go about ensuring security? how do I ensure that the symmetric key is the same both on the SQL standard and SQL mobile?
thank you.
View 7 Replies
View Related
May 25, 2007
I currently have SQL Server Management Studio Express 2005 and would like to upgrade my machine to SQL Developer 2005 as easily as possible. Keeping my databases and such.
Any recommendations on the best way to do this would be greatly appreciated.
thanks!
View 3 Replies
View Related
Nov 19, 2007
Hi,
Can we install reporting services 2005 in a machine in which is not installed SQL server 2005.?
Thanks
View 3 Replies
View Related
Sep 12, 2007
I have a windows forms application that runs on my PC that populates a SQL Server Compact 2005 database and then transfers that .sdf file to my mobile device. The communication between the mobile device and PC is done using the Desktop RAPI class from OpenNetCF (http://www.opennetcf.com/FreeSoftware/DesktopCommunication/tabid/90/Default.aspx)
Anyway, I was previously using SQL Server Mobile 2005 and my populated .sdf was around 1.7 MB and I could transfer it to my mobile device in a minute. Once I switched to SQL Server Compact 2005, the transfer process began taking 3 minutes with a 1.5 MB .sdf file. The SSCE also got bloated more easily so I added in the Compact operation each time after I fully populate the SDF to keep the file size at 1.5 MB, but even then it still takes 3 minutes.
I've done a few tests where I simply switch between the two database versions and that simple switch of the version changes the transfer time. I am dumbfounded trying to figure out what the cause might be. Since it is just a file transfer, why would the version even matter unless somehow SSCE is really not compacting and lying about its actual size.
Has anyone run into anything similar to this or may have any ideas what might be going on?
Thanks.
View 3 Replies
View Related
Jul 18, 2006
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1?
I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it...
There's another file under that folder named sqlexpr32.exe I am wondering what it's for?
Thanks in advance.
View 1 Replies
View Related
Jul 18, 2006
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1?
I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it...
There's another file under that folder named sqlexpr32.exe I am wondering what it's for?
Thanks in advance.
View 2 Replies
View Related
