Remote Connection Problems, I've Read Many A Thread On This And Nothing Has Worked!
Apr 3, 2006
Hi, I am trying to enable remote access on a SQL Server 2005 standard edition instance. I have enabled it in the properties using the Management studio and have enabled it under Sql Server Surface Area Configuration under "Database engine".
But it didn't work. I know for a fact that my connection string is correct (I tested it on the actual machine)
So I checked everything again and I noticed in the Sql Server Surface Area under "Analysis Services" there is another "remote connection" checkbox to be enabled, however it won't let me enable it there because it says the "Sql Browser" is not started. I checked and the Sql Browser is started.
I'm thinking maybe the problem there is that I have an instance of SQL 2000 running and perhaps it is the sql browser for that (I can remotely connect ot my SQL 2000 instance).
I checked under Computer management -> services and their is no SQL Browser for the instance of SQL 2005. Not even a thing to enable. Just the Default instance SQL Browser, which is for my SQL 2000 instance. Am I missing something here?
Also there is no SQL Browser to enable in the management or Surface Area Configuration programs.
I have also tried to connect using the default port number (1433) and the IP (to bypass the need for the SQL Browser). It apparently finds my Server 2000 instance because it doesn't accept my user name and password and connot find the specific database (note: I verified the username and pswd are correct by testing the values on the SQL machine). How do I find what port number a specific instance of SQL Server is running on?
View 5 Replies
ADVERTISEMENT
Mar 15, 2008
Hi
I have a DLL deployed in SQL2005 which uses Thread pool. Since DLL exists in DB we can directly access it using context connection = true.
In my case the following works fine, if i execute the same out side Threadpool
SqlCommand cmd = new SqlCommand("select 1...", connection);
SqlContext.Pipe.ExecuteAndSend(cmd);
When i execute inside threadpool, either by passing opened connection object, or tried to open connection to "context connection = true" i am getting following error.
System.InvalidOperationException: The requested operation requires a Sql Server execution thread. The current thread was started by user code or other non-Sql Server engine code. at Microsoft.SqlServer.Server.SmiContextFactory.GetCurrentContext() at Microsoft.SqlServer.Server.SqlContext.get_CurrentContext() at Microsoft.SqlServer.Server.SqlContext.get_Pipe() at hiqidty4.hiqidty4.Identify_Search(Object identifyin)
Let me know if i am missing any more here
Thanks in advance
View 1 Replies
View Related
Jul 23, 2005
I am using ODBC (ODBCLink/SE) to connect to HP3000 system;Retrieving the data into Microsoft Excel goes fine usingMicrosoftQuery.But if I try to use SQLServer2000-DTS on Windows2003 to do the import,it always fails and gives the message:"ODBCLINKSE does not allow multiple thread"Does anybody knows how to do that?I need to synchronize data in HP3000 into my database in SQLServer; andI dont see any other ways to do that besides using DTS-scheduled-jobs.Pls help..
View 2 Replies
View Related
Jul 20, 2005
is it possible to use a single connection object shared by severaltasks where each task is handled by a thread? these tasks call storedprocedures that return record sets, no editing, update or delete.my objective is that db connection is expensive and each user can onlyhave 1 connection object. each user submits a request to the webserver, and the result web page construction consists of a number ofresult sets obtained from several stored procedure from the samedatabase instance.i could obtained my result sets by making each sp call one at a timebut was thinking whether i could instead break up the tasks, create athread for each task that shares the same db connection objectconcurrently. the connection object will be alive until all tasks arecompleted, that is if the final object ive could be achieved in ashorter time. No connection pooling here.i am wondering over questions like:1. within the same db instance, if 2 stored procedures need to accessthe same table, does SQLserver queue-up and service one request at atime.2. would there be any problem using the connection object this way,sharing between multiple theads?3. is it possible that a 'dead-lock' may occur within the DB?of cos this whole idea can be absurd and into the trash if theconnection object doesn't support multi-thread and is queue based inthe first place.pardon me if my SQL server basics is off track. been doing too manyother things.thanks,meng
View 2 Replies
View Related
Mar 6, 2007
Hello All,
Suddenly, the sql server is down, in the log file, C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG, I found the record as follows,
2007-03-05 15:40:31.59 Logon Error: 17189, Severity: 16, State: 1.
2007-03-05 15:40:31.59 Logon SQL Server failed with error code 0xc0000000 to spawn a thread to process a new login or connection. Check the SQL Server error log and the Windows event logs for information about possible related problems. [CLIENT: 172.21.123.48]
What else I can do to further investigate?
Thanks
Spencer
View 11 Replies
View Related
Oct 11, 2007
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies
View Related
Apr 7, 2008
When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Any ideas???
View 8 Replies
View Related
Nov 23, 2005
Hello, everyone:
I have a local transaction,
BEGIN TRAN
INSERT Z_Test SELECT STATE_CODE FROM View_STATE_CODE
COMMIT
View_STATE_CODE points to remote SQL server named PROD. There is error when I run this query:
Server: Msg 8501, Level 16, State 1, Line 12
MSDTC on server 'PROD' is unavailable.
Server: Msg 7391, Level 16, State 1, Line 12
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d01c].
It looks like remote server is not available inside the local transaction. How to handle that?
Thanks
ZYT
View 5 Replies
View Related
Aug 30, 2006
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
View 1 Replies
View Related
Mar 24, 2008
Hi,
I have load a CSV file into one of the table in sql server 2005 using bulk insert command. But the csv file in remote system.
Please help me.....
View 1 Replies
View Related
Mar 1, 2006
I'm getting "Access denied" error when I try to connect to SSIS from my desktop (Database Engine is fine). I'm a member of sysadmin within SQL, as well as an administrator on the server. I don't have any problem when I log on to the server directly via Remote Desktop and open SSIS.
I went into the surface area config tool, and I see that Database Engine and Analysis Services both expand and have a sub tabs to enable Services and Remote Connections, but Integration Services does not expand to a Remote Connections option, just Services. We're running MSDN Enterprise edition.
Does it matter if all the SQL services are using "Local System" for the logon ? I use an administrative logon on my SQL2000 boxes, and was fiddling with them on the 2005 box yesterday, but it seemed to cause more problems, so they are all Local System for now.
Am I missing something obvious ?
View 3 Replies
View Related
Mar 23, 2015
We log ship our production database tansaction logs to a secondary database on a separate remote domain.
Incidentally, this was not set up via the "Ship Transaction Logs" wizard, but instead we had to use the various system stored procedures after restoring a copy of the database on the remote domain in standby mode.
We now have an issue where users are unable to access the remote secondary database without having sysadmin privileges. Clearly we want to avoid this!
We want to be able to use Windows Authentication mode on the server of the secondary database. But since the two domains differ, is it possible to even achieve this?
How can we set up read-only access for users on the secondary database without giving them sysadmin privileges?
View 3 Replies
View Related
May 19, 2008
Hi. I'm (very) new to SQL Server. I have run into what seems to be a very common problem, judging by the number of Google hits, but it's not actually in the FAQs here, as far as I can see.
Situation
I installed SQL Server Express with Advanced Services 2005 on my Windows XP Pro laptop, using (with one exception) the default install. The exception was to put the data files on a separate partition (D: ) where I have more free space.
SQL Server Management Studio Express connects happily, and I set up a single data import table.
Issue: bcp Fails to connect to default local instance
I initially tried bcp in output mode, prior to working in earnest on importing my data. However the command line-
bcp MyDatabaseName.dbo.UserProfile out UserProfile.txt -T -c
Fails with the error-
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
As I understand it, the local instance of SSE is the default, and should use a local (shared memory?) connection. This seems to work for Management Studion Express, but not bcp.
While investigating this problem, I tried enabling remote connections (all types) through the Surface Area Configuration wizard, and found that remote connections using either of:
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S localhostsqlexpress
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S mycomputernamesqlexpress
both work ok.
Extra Info
When starting Management Studio Express, it says something like "Configuring environment for the first time". However it says this every time it is started, not just the first run after installation, does this indicate some configuration data is not being successfully stored?
I have found threads that look similar to my issue-
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=836670&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3351349&SiteID=1
However these do not relate directly to bcp, and to be honest my knowledge of SSE is slender enough at this stage that i'm unsure if there are really relevant.
Any hints on how to proceed much appreciated.
Regards: Colin E.
View 6 Replies
View Related
Jun 19, 2006
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?
View 54 Replies
View Related
Mar 18, 2008
I have app.config<connectionStrings>
<add
name="OrganizationConnectionString" connectionString="Data
Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|inDebugDatabaseOrganization.mdf;Integrated
Security=True;Connect Timeout=30;User Instance=True" providerName="System.Data.SqlClient"/></connectionStrings>Code behind:
string ConnString
= ConfigurationManager.ConnectionStrings["OrganizationConnectionString"].ConnectionString; I am getting "ConnString" value null. How handle this?
View 4 Replies
View Related
Jul 20, 2005
Hi,I have two, similar SQL Server 7.0 databases (in the same SQL ServerGroup) that I use as the backend for two Access 2000 front endapplications - one is the live version, the other is the developmentversion.The live version works fine. But the other version is read-only, i.e.no changes can be made to the data in the tables, over the ODBCconnection.Both systems have similar ODBC connection properties, the permissionsettings on the SQL Server databases are the same - users, tableaccess, database access, etc. The connections use Windowsauthenication and the users are set up in SQL Server security loginswith public and db_owner selected.Has anyone seen or heard of this problem and does anyone have anyideas on how to fix it?I appreciate any comments or suggestions you may have.Thanks,Chris
View 3 Replies
View Related
Nov 13, 2007
Hi,
I want to read only the first row in flatfile. I do not see this option on "Flatfile connection manager editor" setting wizard.
Any work around for this?
Thanks in advance
View 11 Replies
View Related
Feb 23, 2007
I have a Parent package and a child package.
I have hard coded the value for the User::FilePath variable in the parent package.
I am mapping this variable to the value of the same variable in the Child Package.
I created a directory and sql file: "C: empsqlb.sql". I have verified that the path variable value is passed to the child package by using a Script task with a messgbox call.
How do I define an execute sql task to execute sql file: @[User::FilePath] & "sqlb.sql". I'm using this expression for the SqlStatementSource property. I have entered the OLEDB server information and specified the SQLSourceType = fileconnection.
However I get the error:
[Execute SQL Task] Error: Connection manager "D:
lewisdevZsqlb.sql" does not exist.
What am I doing wrong?
View 3 Replies
View Related
Nov 30, 2015
My application supports a single database connection and in the app console I can produce reports. If I include the app database in an AlwaysOn availability group with a read-intent replica will SQL automatically route the “selects” to that second instance thus offloading my application’s reporting activities or I need a separate db connection (maybe from a reporting app or cli) with a connection specifying read-only intent?
View 4 Replies
View Related
Nov 13, 2001
I am connecting a access database to SQL Server and lately I have been getting this error every once in a while. Any idea why?
View 1 Replies
View Related
Aug 10, 2015
I've created an excel spreadsheet with a data connection. This data connection uses a query that runs against a read-only database.
The issue I'm having is that the query never seems to finish running against the database, whether I open the Excel spreadsheet to view the data or run the query in SSMS.
I created the connection on the Data ribbon by going to From Other Sources --> From SQL Server and using the Data Connection Wizard.
Is there some kind of setting or property I'm missing that would allow this query to finish running?
View 6 Replies
View Related
Sep 29, 2006
Very nice; that worked.
It seems like a lot of code for each date field, but we are up and running now.
View 1 Replies
View Related
Jul 23, 2005
HiI've a SP in MSDE that will update a table. How could I know if itworked to return a value to the SP caller ?Thanks in advanceJ
View 1 Replies
View Related
Mar 24, 2008
Hi All,
I need to read a csv file, which is in remote server using SQl Bulk Insert Command.
Can I read a file Which is in remote server using BULK INSERT.
Thank you.......
View 1 Replies
View Related
Apr 24, 2007
Hello everyone, I am trying to connect to a remote SQL 2005 database from Microsoft SQL Server Management Studio.I enabled the remote connection on the server and creating a user on the server.I am trying to connect to the server from my workstation using sql server authentication with the login name already created on the server.
I am receiving this error: cannot connect to "server name"cannot open user default database. Login failed.Login failed for user "username".(Microsoft SQL Server, Error: 4064)
Can anyone help?
View 1 Replies
View Related
Mar 31, 2008
hello !
I am deploying a websete in visual studio2005 after deploying, when run a website Login Failed: The user is not associated with a trusted sqlserver connection. error occurs plese anybody helpme. urgent
Thanks.
View 3 Replies
View Related
Apr 23, 2006
I am attempting to connect to SQL 2005 server. The server and the VS 2005 are on the same computer. I have configured the db so it uses the security for asp. The log in section connects fine and checks for the user. I have combined the old db with the new ASP security. If the user is not found then I open a connection using the open command and check for the user in the old part of the db. The is where I have trouble. I get the message below that the server connect but then won't allow remote connections. I have check the setting and the allow remote connections is checked. Thank in advance if anyone can help.
Endeavor
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.)
View 2 Replies
View Related
Oct 4, 2004
I am now trying to connect with the correct details to an MS SQL machine.
The machine in question is not local to me and the internal ID is //bobsmachine01.
I know this is a dumb question, but I shall ask it anyway...I am using MS Access 2000's "Upsizing wizard" and it asks me for the machines name - what should I put to connect to it??
I know the IP of the machine and the internal ID for the MS SQL Server.
Any help much appreciated,
Chas
View 1 Replies
View Related
May 8, 2006
How would I connect to remote SQL 2005 database using Management Studio?
The only difference from local DB is that I type IP address instead of server name, right?
I'm getting error:
Testing the registered server failed. Verify the server name, login cridentials, and then click Test again.
Additional information:
An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 53)
I did everything from article "How to configure SQL Server 2005 to allow remote connections"(http://support.microsoft.com/?kbid=914277&SD=tech). SQL Browser enabled. Both TCP/IP and Named Pipes are enabled. Exceptions in firewall for sqlsrvr.exe and sqlbrowser.exe added.
Did not help.
What else could I check?
View 3 Replies
View Related
Jun 7, 2007
Hi,
I have SQL Server 2005 running on a machine with "Allow Remote Connections" property turned on. This server has SQL Server Authetication mode turned on.
I can connect to the server locally with sa login and password but when I try connecting to the server remotely it gives me following error:
TITLE: Connect to Server
------------------------------
Cannot connect to ServerName.
------------------------------
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233).
Any help is appreciated.
View 4 Replies
View Related
Jul 5, 2007
Hi all,
I have a machine that is running windows 2003 server, and sql server 2005 developer edition(let's call this machine server one). I have another machine running windows xp and sql server developer edition, visual studio 2005 pro(machine 2). I have developed a small windows application on machine 2, but I'm trying to connection to the database that one mcahine one, and I keep getting some the following error
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)"
Any idea why? How do I need to configure that ?thanks
View 5 Replies
View Related
Apr 14, 2008
Hello,
I have microsoft sql server management studio express 2005
but if i want to connect it says that i cant connect because remote connection are not aload but i searched support on microsoft and i enabled it restarted the database enige but still dont works can please someone help me?
Pleasant greats.
Irakli
AND HOW DO I KNOW WHAT MY SERVER NAME IS?
MAYBE ITS BECAUSE MY SQL BROWSER ISINT RUNNING? AND I CAN'T START IT...
View 18 Replies
View Related
Mar 9, 2007
Hi all,
Need to know if its possible to allow remote connections and access a Sql Ce database using TCP/IP.
Thanks for your help
Hach
View 3 Replies
View Related
