I have a software to connect the SQL Server as DB, and it is ok to connect to the SQL Server 2000 on the remote server in our firm, but got errors when doing the connection to the SQL Server 2005. the error messages are:
Error #1:
ADO Error #-2147467259
Description SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
Source Microsoft SQL Native Client
Error #2:
ADO Error ##-2147467259
Description An error has occurred while establishing a connection to the server. When connection to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Source Microsoft SQL Native Client
Error #3:
ADO Error ##-2147467259
Description Login timeout expired
Source Microsoft SQL Native Client
I'm using SQL Server 2005 version 9.00.1399.00, not the Express version. Should I update the SQL Server 2005 Network Configuration in SQL Server Configuation Manager? But I don't know what should be set to "Enable" or Disabled". Is any other place need be configured?
I have a local SQL Server 2005 instance running, and I would like to have another user on my network connect to this instance. However, when he tries to connect, he always receives the same error message:
"An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error 28: - Server doesnt' support requested protocol)"
So, I checked the properties for the server, and under the connections tab the allow remote connection box is checked.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I'm having a big problem with a SQL 2K5 cluster (using standard edition). I can get onto the box and connect to the sql server locally fine. However when I try to connect remotely I get errors.
Let's call the two sides of the cluster, CL1 and CL2 and the "virtual server" is CL3. Locally I can connect without any problem at all to the SQL server, but I just can't connect to it from any remote machine.
The server in question is instance name LMS_PRD running on CL3, port 10051. TCP/IP is definitely enabled for local and remote connections (I have checked this in the SQL server surface area configuration). I can connect locally without any problem. Also, locally, if I do,
telnet CL3 10051
it connects fine
From a SQL 2000 box - when I try to connect from sql query analyzer, I get
"Unable to connect to server LMS_PRD Server Msg 17 ... SQL server does not exist or access denied"
Client network utility shows server alias - LMS_PRD, TCP/IP, CL3LMS_PRD,10051
[I can connect to other SQL 2005 servers OK from this same server using this same method]
On this box, when I do telnet CL3 10051 , I get "Connecting to CL3...Could not open a connection to host on port 10051 : Connect failed"
[When I do a similar one for another SQL 2005 box, "telnet U01 10051", it connects fine]
From another SQL 2005 box - when I try to register the server, I get
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP provider, error 0 - No connection could be made because thew target machine actively refused it.) (Microsoft SQL Server, Error: 10061)"
IN the SQL native client configuration it shows alias name - CL3LMS_PRD, server=CL3LMS_PRD, protocol tcp, parameters 10051
Again if I do telnet CL3 10051, I get the error above.
From this same box I can register another SQL 2005 server without any problem and do the telnet to it OK
Just to emphasise:
(a) The SQL server configuration manager shows that TCP/IP is enabled, and that 10051 is the port (in IPALL, TCP port). Also I have checked the SQL server errorlog - it is definitely using 10051 as the port.
(b) The SQL server surface area configuration shows under local and remote connections using both TCP/IP and named pipes selected (I've tried both this and the using tcp/ip only option)
Hi, I have a SQL Server machine, which has SQL Server 2005 installed in it. I'm able to connect to this server remotely (Remote Desktop Connection) But when I'm trying to connect this SQL Server using SSMS. I'm getting the following error.
TITLE: Connect to Server ------------------------------
I'm having a big problem with a SQL 2K5 cluster (using standard edition). I can get onto the box and connect to the sql server locally fine. However when I try to connect remotely I get errors.
Let's call the two sides of the cluster, CL1 and CL2 and the "virtual server" is CL3. Locally I can connect without any problem at all to the SQL server, but I just can't connect to it from any remote machine.
The server in question is instance name LMS_PRD running on CL3, port 10051. TCP/IP is definitely enabled for local and remote connections (I have checked this in the SQL server surface area configuration). I can connect locally without any problem. Also, locally, if I do,
telnet CL3 10051
it connects fine
From a SQL 2000 box - when I try to connect from sql query analyzer, I get
"Unable to connect to server LMS_PRD Server Msg 17 ... SQL server does not exist or access denied"
Client network utility shows server alias - LMS_PRD, TCP/IP, CL3LMS_PRD,10051
[I can connect to other SQL 2005 servers OK from this same server using this same method]
On this box, when I do telnet CL3 10051 , I get "Connecting to CL3...Could not open a connection to host on port 10051 : Connect failed"
[When I do a similar one for another SQL 2005 box, "telnet U01 10051", it connects fine]
From another SQL 2005 box - when I try to register the server, I get
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP provider, error 0 - No connection could be made because thew target machine actively refused it.) (Microsoft SQL Server, Error: 10061)"
IN the SQL native client configuration it shows alias name - CL3LMS_PRD, server=CL3LMS_PRD, protocol tcp, parameters 10051
Again if I do telnet CL3 10051, I get the error above.
From this same box I can register another SQL 2005 server without any problem and do the telnet to it OK
Just to emphasise:
(a) The SQL server configuration manager shows that TCP/IP is enabled, and that 10051 is the port (in IPALL, TCP port). Also I have checked the SQL server errorlog - it is definitely using 10051 as the port.
(b) The SQL server surface area configuration shows under local and remote connections using both TCP/IP and named pipes selected (I've tried both this and using the tcp/ip only option)
Help! My web-application worked fine last week. I have made some enhancements and it still works fine when I test in locally in VS 2005 and from IIS when I allow unauthenticated users (by commenting out "<deny users="?"/>" in my web.config. However, with not allowing unauthenticated users, I get redirected to a login application (which also worked last week), where I supply one of several user names and passwords and it is supposed to redirect me back to my default.aspx page. Only, now it is taking the authentication parameters from the login screen but is not redirecting me back to my app's page and instead is putting up this Error 26 that states SQL Server 2005 does not allow remote connections. The included stack trace has no information about what server it seems to be trying to connect with, but the strangest thing about it is I/we are not using SQL Server 2005 yet (still a future upgrade not too far off). The application database, the authentication aspnetdb database, and the Session aspstate database are all on the same SQL Server 2000 managed server. And, these were all working last week (and are all accessible). I have not changed any connection strings and as I said, it works fine without the loging in part both locally and from IIS. It is only when using the Login in application, which is working with other apps and the developer insists the problem has to in my application (after all the first line of the error message states: Server Error in '/deployment1' Application, which is my app!) I am lost in finding the culprit, can someone please give me some ideas?
I installed SQL server 2005 express edition on my windows server and I had no problem with connecting it remotely through Management Studio, then I removed it and installed a full edition SQL server 2005. That's when it's gone all wrong.
Now I can't remotely connect the server through Management Studio. The error I get is the same as some of the people in this forum has which is:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
The problem is that I have all protocols enabled and even when I disable firewall and unassign all the ip filters still no go.
I looked at te machine.config file at my server and the connection string bit goes like this:
I am using MSSQL Server 2005 Express Studio and tryig to connetch to the remore server but does not work.
I get this error.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Though I have read like child and made changes according to it.
http://support.microsoft.com/kb/914277
Still says same error.
I am clueless how to do it.
Do any one know web based mssql editor where i can connect mssql?
I have a SQL Server 2005 database (called BDHSE) in a PC which i call PC1. I have a second PC (PC2) and both are within a network (a WLAN).
What i want is to have access to BDHSE from an application in VB6 (APP1) running in PC2. All the INSERT, DELETE, UPDATE records process is done through APP1.
APP1 ia currently running in PC1 and is to be installed on PC2.
I have these questions:
1. What do i need to install in PC2 since all the INSERT, DELETE, and UPDATE is done using APP1? I guess i only have to install the Microsoft SQL Native Client (with all the prerequisites of course) but i am not sure.
2. In the APP1 made in VB6, do i have to change the connectionstring since i am accesing the database which physically is at PC1 and the APP1 will be used in PC2?
3. Any advice you can give me on doing this will be well received.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1. Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration. Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"... The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
I'M HAVING AN ISSUE, UNDERSTANDING, THE CONNECTION STRING. I WANT TO CONNECT TO AN INSTANCE OF SQLEXPRESS ON A REMOTE SERVER WITH A FIXED IP ADDRESS THE TCP PORT IS OPEN TO 1433 I OPENED THE PORT ON THE ROUTER AND THE WINDOWS 2003 FIREWALL
MY CODE IS AS FOLLOWS: S = "Provider=SQLNCLI;" S = S & "DATA SOURCE=44.66.777.888,1433SQLEXPRESS;" S = S & "INITIAL CATALOG=TESTDB;" S = S & "Persist Security Info=false;" S = S & "UID=TEST999;" S = S & "Pwd="TEST999888;" CnMgt.ConnectionString = S CnMgt.Open S
I'VE FOLLOWED THE STEPS OUTLINED IN ARTICLE 914277
CAN SOMEONE HELP? THANK YOU
PS. IF THE CLIENT IS LOCAL, I HAVE NO ISSUE OPENING THE DATABASE. I DO NEED TO OPEN THE DB FROM FROM CLIENTS.
hello there! i have a problem importing data from a remote connection using Sybase ASE ODBC driver(the sybase odbc driver is the only way we can access the database from the remote connection, we've already tried this in crystal reports). in the sql server import export wizard i chose the .net framework data provider for odbc. then below the wizard requires the following info: the connection string, DSN and driver. i specified the correct driver and dsn. in the connection string i specified the user id and the server name but it still produces error. the error says:
the operation could not be completed.
additional information: ERROR[01000][SYBASE][ODBC Sybase driver][Sybase]ct_connect(): user api layer: internal Client Library error: HAFAILOVER: Trying to connect to server. ERROR[01000][SYBASE][ODBC Sybase driver][Sybase]ct_connect(): user api layer: internal Client Library error: HAFAILOVER: Trying to connect to server.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195 System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95 System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105 System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497 System.Web.UI.Control.InitRecursive(Control namingContainer) +321 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
I am having a problem connecting to a remote SQL server 2005 instance. The remote server is for a website hosting account of mine. I can connect to the server from computers other than the problem computer just fine. I cannot connect to the server using any software including SQL Server Management Studio Express, Visual Web Developer, or even when trying to use aspnet_regsql.exe on the problem computer. The request to connect to the remote server never seems to leave my computer. When talking to my hosting service, they replied that they did not receive a request to connect to their server from me. I have shut down Windows Firewall as well as my third-party firewall with no change. The error message that I receive is:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
If anyone has any ideas they would be appreciated.
I am using the VB 2005 login controls in a web application together with a wizard created sqlserver 2005 database stored in the application's appData directory. The controls work ok on my local development computer but when I deploy the application to a web hosting server (ASP.Net) I get the following error message when using any of the log-in controls: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Any suggestions on how to eliminate this error? Thanks for your help. Ken McLean
for past few days this is making me mad. i have enables tcp/ip connections, have tried diffrent domain logins,enabled mixed mode but still when i try to connect remotely to SQL Server 2005 it give me which is as follows
general network error - check your network documentation ConnectionOpen (PreLoginHandshake())
I am trying to look at a friends database that they have developed. Not having used SQL Server Express before I am experiencing problems trying to remotely connect to their database.
He connects locally just fine of course.
I get the error message about remote connectionsand the default settings so I have enabled TCP/IP and Named Pipes as well as cleared SQLSERVER Express in my firewall settings. I also stopped and restarted the service, but still get the same error message.
My connection parameters are like:
Server type: Database Engine Server name: http://sql.exampledatabase.net (should http be here? have tried with and without same error) Authentication: SQL Server Authentication (windows authentication? If so, how do I change to such?) Login: http://username (should http be here? have tried with and without same error) Password: password
TITLE: Connect to Server ------------------------------ Cannot connect to http://sql.exampledatabase.net
ADDITIONAL INFORMATION: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
I have Outlook 2007 w/BCM running on XP Pro workstation connecting to a SBS 2003 R2 hosting my SQL 2005 database. I have two problems: First I can get the BCM to connect to the remote data but periodically the connection is lost and many times it requires a reboot to reconnect. Secondly related to teh first, I can never get MS Accounting 2007 to connect to the same server and database from my client.
I have already set up the server to use port 5356 via TCP amd added a hole through my client windows firewall for the same port. Both client and server are set to share files and printers.
I have Microsoft SQL express server 2005 setup on one server and I have a website setup on another server, I am trying to get some data from the SQL server on the other one. I am currently getting this error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) I have done plenty of searching on Google, and already been through the tutorial on changing the setting in ‘SQL Server 2005 Surface Area Configuration’ to allow remote connections http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspxhttp://support.microsoft.com/default.aspx?scid=kb;EN-US;914277 It works perfectly when I call data from my local machine. Also I don’t know if it is a timeout issue, because I tested in on two other servers I have access to and it worked on one of them. Any help would be very much appreciated. Thanks in advance.
I followed the steps outlined in a blog I found to setup SS2005 express for remote connections. Everything appeared to go smooth until I actually tried to logon ;)
I have Sql Server 2005 Express installed on my WinXP PRO machine at home (no domain). I have opened the ports on the firewall, etc.
When I try and login from the SQLCMD command line tool I get a Login Failed error. Here is the connection string that I'm trying to use: SQLCMD -S **.***.**.*SQLEXPRESS -U Steve -P MyPassword
The error: Login failed for user 'Steve'.
When I use Management Studio Express on the same machine running Sql Server, it shows the User name: NEVERSTILLSteve
'NEVERSTILL' is the name of my computer.
If I try and use that same username with a remote connection I get the same error.
I have googled for the error and msg code, but nothing fitting my situation is coming up.
2 weeks ago, I installed a SQL Server 2005 Express on one of my computer. I fought to configure the remote access, but finnaly it did work.
Yesterday I had to move my server on another computer and I've never succeeded in configuring the remote access. I don't understand why it is so complicated to install remote access. I explain you what I did, and if you could say me what i missed, it could be amazing !!
I install SQL Server 2005 Express including the SQL Server Management Studio Express. I went to the SQL Server surface area configuration and i enable Remote Access (TCP) and turn on the SQL Browser I enabled Server authentication => SQL Server and Windows Authentication mode. I created users with all the permission i can give to them. I restart one million time all the services and nothing...I tried to connect to the database using my local Microsoft SQL Server Management Studio Express, using the Visual studio Sever Explorer and with C# script using this connection string :
sConnectionString = " Server=myIP\SQLEXPRESS; Initial Catalog='myDatabase'; user id = myLogin; password = myPassword";
And I've never succeeded in connecting, I have always the same error :
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)which means the database is not reached.
I've tried all I know in an effort to get SQL 2005 Express to allow remote connections on my customer's 2K3 server and I'm not having any luck. I've followed MSKB 914277, including adding the exceptions to their Windows firewall...even disabled the firewall altogether (for testing purposes), and I still can't get remote clients to connect. As suggested by various other posts, I used netstat -an to confirm that SQL is listening on port 1433 for the desired IP on the server.....and saw that it is listening. Here's a snippet:
TCP 192.168.0.2:1433 0.0.0.0:0 LISTENING TCP 192.168.0.2:1433 192.168.0.2:1738 ESTABLISHED TCP 192.168.0.2:1738 192.168.0.2:1433 ESTABLISHED TCP 127.0.0.1:1433 0.0.0.0:0 LISTENING
I can connect to the database locally (i.e. on the 2K3 server itself) using just the IP address .... tried with a DSN, UDL, ODBC, and SSMSE...all of which have no problems (as shown by the two, "ESTABLISHED" entries in the netstat results above which were from running SSMSE locally on the server at the time of the netstat). But if a remote computer on the network tries to connect, they cannot connect. Sorry, I don't have a copy of the error message the clients are getting yet.
I asked The customer's IT to confirm that the clients CAN can "see" the server (i.e. that there wasn't some kind of router or firewall blocking their path) and they sent me a copy of the server's pfirewall.log file. Here is an entry from the file that seems to show that client requests ARE getting to the server:
I'm starting to get in over my head here (I'm a programmer, not a DBA or Net Admin), but doesn't the above suggest that an incoming request came in from .4 on port 1213 and attempted to connect to .2 on port 1433, but the connection was denied or dropped by the server? If so, why? Is this related to another MS KB I read about connection pooling? I'm way over my head here and could use some help. Did I miss something subtle during configuration of SQL Express? Thanks in advance.
I have two machines, the one has Windows 2003 server and the other has Windows Xp Pro on.
The 2003 one has SQL Standard Edition 2000 on where as the XP Pro has MSDE 2000.
I'm trying to run a windows based app from the 2003 server and it connects to a database on the XP Pro PC.
When running the application i keep getting the following exception:
"A Transport-Level error has occured when sending the request to the server (Provider: Named Pipes Provider, error: 0 - The specified network name is no longer available)
After using Preformance monitor on the XP machine it seems that when the app starts and the user logins in it make a SQL connection but then the connection is lost then the exception pops up. then i click continue and try it again then it works, then a couple of secs when using the system it pops up again. The Performance Monitor Test shows that the SQL connection keep being lost. The network is fine. its has something to do with SQL and Named Pipes and stuff.
When running the app on the Xp machine and the Connection is made to the 2003 machine there is no problem.
There are other connection made to the Windows XP Machine but i doubt that it affects the app.
Hi, I've worked with SQL Server plenty but never in this specific manner. Hoping someone can shed some light.I have a webform on web server A that needs to talk to a SQL server database that web server B accesses via its web application. I do not haveany privelidged access to server B or the sql server it uses (no FTP to webserver, no remote access via Enterprise Manager to the SQL server). The Admin of Server B told me that I can use a DSN connection to talk to the SQL server database that the web app on server B uses. He emailed me the names of the SQL database tables AND a copy of the web.config from server B which shows the DSN implemented like this:<appSettings> <add key="dsn" value="data source=sql3.domainname.net;database=dbname;User Id=dbuserid;password=dbpw;" /> <add key="default_language" value="en" /> <add key="error_email_to" value="someone@domainname.com" /> <add key="baseHref" value="http://www.mysite.com/" /> <add key="website_name" value="$$$$$$$$$$$$$$$$$" /></appSettings> I was planning to run my webforms on Server A where I do have FTP, Control Panel, etc.So, I wrote this code into my VB.NET codebehind file. Dim oODBCConnection As OdbcConnectionDim sConnString As String = _"Driver={SQL Server};" & _"Server=sql3.domainname.net;" & _"Database=dbname;" & _"Uid=dbuserid;" & _"Pwd=dbpw"oODBCConnection = New Odbc.OdbcConnection(sConnString)oODBCConnection.Open()... commands to access data and load something into a control on a webformoODBCConnection.Close() When I attempt to run the webform in my browser from Server A. I'm getting this error:ERROR [08001] [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. ERROR [01000] [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).The error is EXACTLY the same whether I place the appSettings section in server A's web.config or leave them out.I have obvious questions about the error like...Might sql3.domainname.net simply be refusing communication requests that don't come from the Server B domain?Might the sql3.domainname.net be setup so that I need to use another protocol (not tcp/ip)?Might my code need to be changed to support this type of connection (i.e. I didn't code it right)?I spent some time reading http://support.microsoft.com/kb/328306/en-us but I'm at a loss as to what the best course is to take for debugging this.Thanks in advance for any insight you can offer. Stewart
