While trying to transfer my website project to another computer I am encountering an error when tryng to run the solution. It gives me a "Does not allow remote connections". Why is this when on the original computer everything worked fine.
Walter
Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
I am getting the following connection error:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)When I run the page locally on my develepment environment, the page runs fine. I'm using VS2005 and SQL Server Management Studio Express.When I upload the page to the remote server, I get the connection error indicated above.To further troubleshoot the issue, I created a simple test page with the connection string hardcoded in the code-behind and binded to a dropdownlist using the following code:SqlConnection conn = new SqlConnection("Data Source=xxx.xxx.xxx.xx;network=DBMSSOCN;Initial Catalog=TechCenter;Persist Security Info=True;User ID=xxxxx;Password=xxxxxrx;Asynchronous Processing=True;MultipleActiveResultSets=True");
conn.Open(); SqlDataReader dr; SqlCommand command = new SqlCommand("SELECT RecordID, customer_id FROM Customers WHERE recordtype <> 'F' ORDER BY customer_id ASC", conn); dr = command.ExecuteReader(); while (dr.Read()) { DropDownList1.Items.Add(new ListItem(dr["customer_id"].ToString(), dr["RecordID"].ToString())); } dr.Close(); conn.Close();When I run the test page, it works fine, so I know I'm using the correct connection string properties.When I move the connection string to the web.config file and using a dataset with a tableadapter, I get the error about the sql server not allowing remote connections? I'm stumped. I cannot isolate the cause of the error.The remote server is using sql server 2000 and error indicates it is trying to connect to SQL Server 2005??? Any help would be greatly appreciated.Thank you.
Hi all
This question has probably been asked a few times on the forum but none of the answers work for my situation.
I recently installed SQL Server 2005.
When trying to connect to my server, locally, using Management studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53).
I have already enabled remote connections in the Surface Area Configuration, using TCP/IP and pipes.
I created exceptions in the Firewall and started the Server Browser service.
Please help
Thanks
Guys,
I can connect the sql server instance through management studio and I can also create a DSN to the same sql server instance. But when the application tries to establish the connection i get the following error
I have checked the following
SQL BROWSER is started
TCP/IP default port 1434 is enabled
At this point I am not sure how to proceed further to trouble shoot this issue.
System.Exception: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Any suggestions and inputs would help.
Thanks
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies View RelatedHi,
My .NET 2005 application is on a server outsite company's domain. SQL server is in domain and port for sql server is open. TCP/IP is set for remote connection in SQL Server. Connection string in .config is
<add name="X_Conn" connectionString="Data Source=XXX;Initial Catalog=XXX;User ID=XX; Password=XXX;" providerName="System.Data.SqlClient"/>
I receive the error below:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
thanks a lot in advance!
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
Hi I always get good reply from u all, thank you,
I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password.
I tryed to create new password then also it gives error
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here I have used asp.net login control and membership class. Do I need to make nay changes in code.
I have already modified server name in connection string in web config file.
any one can say what is the problem and how to solve this.
thanks
Pat
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Hi ,
I am struck with one issue.Plz help me out if you have any solution for this one.
Details
Front End - Visual Studio 2005
Back End -SQL Server 2000 (Remote database)
Error i am getting is
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
View 2 Replies View RelatedHi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 1 Replies View RelatedDoes someone have a guide or a link to a guide to allow remote connections from a default install?
Just that I'm currently testing my setup on a work laptop but not having much success but thats probably down to the network admins limiting me far too much on here.
However I am getting a new DELL machine, which I'm gonna make sure the network admins get no where near. Once I have this machine I will be forwarding port 1433 to the machine, but need to know what other changes I need to make to allow my friend access to the machine as well.
So I'd need to know what server settings I need to change and also what my friend needs to do as a client.
thanks in advance!
Hi all,
I would like to enable remote connection on SQL Express 2005 using SMO.
How can I do it?
Thanks,
Assaf
Hello community
I have the following problem = /
http://img101.imageshack.us/my.php?image=asdfzv7.jpg
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 3 Replies View RelatedHi folks,Perhaps every 100 calls to DB i get 1 error message like this:"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" i am using SQL 2000 and am wondering why this happens.I appreciate your help.Leo.
View 3 Replies View RelatedI have a need to connect to a remote (i.e. database on the clients site) SQL Server database from a live application. It is relatively easy under Oracle, but I havent tried to do to an SQL Server. Has anyone done this? The remote SQL Server database in question is 6.5
You can set up odbc connections to remote clients (99% sure on this) so you could go this way. You can also connect directly to a sql box through an IP address in sql7, but I am not too sure how it is with 6.5.
Hi All,
I installed full version of SqlServer 2005. Iam able to Connect to all the systems that are in Intranet. But iam not able to Connect to the external systems (or) remote Connections. I followed all the steps that are in the following URL support.microsoft.com/kb/914277
Still iam getting the problem. Show me a way in this issue.
Thanks&Regards,
SrinivasReddy
Hello guys,
I would like to know how to enable remote connections to my SQLExpress installation? Thank you very much for any help!
Regards,
Fabian
my favorit hoster is ASPnix : www.aspnix.com !
Hello ,
The problem is that we are having Problem while making the remote Connection to the Sql Server 2005
Basically We are having a problem connecting to SQL2005 through a package remotely. when we try to connect to a remote data base, we get the following error
[Connection manager "CRA LRRS Development DB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ".
Although by running the configuration manager on the Remote DataBase System we have enable the Remote Connections through name and IP both but still it cant access it.
Please tell us the possible consequences and provide us the feedback.
I will be really obliged if any of you can provide us the feedback on it as soon as possible.
Thanking You,
Yours Sincerely,
Saima Salim
Hello,
In SQL Server 2005 configuration tools, is there a way to set SQL Server to remote connections and to set the TCP Port through c# code?
Thanks for your help.
I am running a standalone WinXP SP2 system with VS 8 and SS 5 Express on it. I have been working very nicely with VB and SSCE, but I want to learn to use Sql Server 5 Express, which I also have on my system from a prior install of VS 5. I am strictly doing this as a learning experience on my own.
I have been trying to install the NW sample database into SS 5 Ex, but it is obviously not configured properly, because I am getting errors stating that the scripts cannot install because they cannot establish a remote connection to SS. So I looked up the FAQ item here on setting up for remote connections (which I am not even sure applies for a standalone system like mine). Anyway, I followed the instructions in the FAQ, using the SAC util to configure for remote connections, but it does not work. Every time I try to start the DB engine, it fails with the following message:
When trying to start Database Engine when configuiriung for remote connections in SAC:
"TITLE: Surface Area Configuration
------------------------------
The service did not respond to the start or control request in a timely fashion, you need
administrator privileges to be able to start/stop this service. (SQLSAC)
Now, I am the admin user on the PC but OK, so I selected the SAC option to set myself as SSadmin, even though this option is supposedly only for Vista users according to the dialog. Anyway, it does not allow me to set myself as SSAdmin, it returns the following error:
When trying to add myself to SQLSAC, even though it is for Vista:
"TITLE: .Net SqlClient Data Provider
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL
Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open
a connection to SQL Server)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtI
D=2&LinkId=20476"
(which help link is no help BTW, because it is not valid). And the setting does not get set, because the next time I open that dialog, I am back to being a non-admin user.
So what is the solution here? Am I going to be able to use SS 5 Ex on my PC? No matter which connection option I select, either local only, or for any of the remote options, I cannot get it to work. Am I supposed to reboot my PC after changing a setting? Or is it just not possible to run SS 5 Ex on a standalone PC like mine?
Or worse, are there a bunch of other configuration settings I must change as well? I note that, when I look in the SS Config Manager at the properties for SS Express, I see that it shows the logon option that uses the built-in account "Network Service"rather than Local System or Local Service; is that correct? BTW the browser is always running in all this.
As you may gather, I know zip nada about SS, but I am an experienced VB/VBA/VC+/FP programmer of many years, did desktop Access databases w/VB6 frontends for a lot of customers, so I am familiar with DB design etc. I just know next to nothing about backend stuff like this, other than a little with BTrieve years ago.
Any help appreciated
Pete B
.
I am having trouble with Report Manager. It seems that every day or every other day we get this message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No such host is known.) An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections."
To fix this we open the Surface Area Configuration for the server that hosts the Reporting Database and stop and restart the database engine then open up the Surface Area Configuration for the server that hosts the Report Manger database and stop and restart that database engine along with the Reporting Services Browser.
This actually may not be the exact order that we do the stop/starts because we have tried so many different combinations (ie. stop one then start another then restart that one, etc.). Anyway, we usually keep on stoping and restarting until we can get back into Report Manager without getting the error message from above.
Does anyone have any insight as to what this could be??
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have recieved this error and i have changed the surface area configuration to allow remote connections but it still won't allow them after i start and restart the server service. is there any way to fix this i have reinstalled several times and that has not yet fixed the problem either.
I downloaded VS studio express, and created a personal website using the wizard to test drive the thing. When I hit ctr + f5 to run the sample provided, then I get this message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) "
I tried disabling the firewall (Norton's firewall because Windows is disable always). Any suggestions? This is a brand-new machine, running XP sp2, just downloaded the VS studio express.
I really appreciate your inputs.
Regards,
Carlos
info@paesano.com
Hi,
I'm without a clue when it comes to SQL and how to secure it!
I've set up a SQLExpress running on a dedicated server on the web and I'm using TCP/IP remote connection to connect to the DB from a the web server running the ASP .
Would it be better using named pipes?
Also is there some way I can additionally authenticate a connection based on IP numbers?
I would really appreciate some advice thanks.
Hi,
Attempting to open a new database engine from a Windows 2003
R2 server (x64) which is
running SQL Server 2005 to my desktop PC (XP Pro) which is running SQL 2005 developer
edition.
I€™ve opened up TCP/IP and named pipes and enabled all protocols
within surface area configuration and server
configuration manager but get this€¦
An error has occurred while establishing a connection to the
server. When connecting to SQL Server
2005, this failure may be caused by the fact that under the default settings
SQL Server does not allow remote connections. (provider: TCP Provider, error: 0
- A connection attempt failed because the connected party did not properly
respond after a period of time, or established connection failed because
connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
Is this a red-herring type message? I ask because the text
states €œthis failure may be caused€? and as far as I can see I€™ve open up my
PC to all connections.
Thanks in advance
Dave
hi,
sql server 2005 express is installed on comp1. my client application is installed on comp2 and comp3. all comps have win xp. when i run my application, it can't connect to sql server express. i got the following message:
an error has occured while establishing a connection to the server. when connecting to sql server 2005, the failure may be caused by the fact that under the default settings sql server does not allow remote connections. (provider: sql network interfaces, error 26 - error locating server/instance specified)
so, how can i solve this problem, to connect to the server?
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
this is the error message i get and i don't know how to correct it. i have tried going into surface area configuration and setting it allow remote connections but that hasn't changed anything. i am at a loss for how to correct this situation.
when i try to add a new data connection from within Visual basic or C#, i get a 'provider: SQL Network Interfaces, error number 26 - error locating server/instance specified.
i have tried to allow remote connections through the sql configuration manager and the surface area configuration.
I've got the following error from running my aspx webpages, trying to communicate to the MSSQL 2005 database.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)
I've see and read a lot of chatter on the forum on the topic, but didn't find my solution. I have done a number of things, all of which didn't shake the error.
1) I went into SQL Server Surface Area Configuration for Services and Connections, and set Remote Connections to Local and Remote Connections, using TCP/IP only
2) Disabled Firewall
3) Made exceptions throught the Firewall for SQL Server and SQL Browser
Any other suggestions, thanks in advance.