Remote Connections Using SQL Server 2005 Developers Enterprise Edition
Feb 12, 2007
I have a problem. I am using the developers version of SQL Server Enterprise edition.
I am trying to run a command in MS command prompt:
Aspnet_regsql -E -S localhost -ssadd -sstype p
After I execute this command, I receive a Name Pipe
error that under the default settings, SQL Server
doesn't allow remote connections. I took some steps
to try to resolve the problem:
1) I googled the interrnet to see if there was any one
else who ran into the same problem and if there was a
quick resolution.
2) I check SQL Server Books on line about SQL server
configuration manager and how to enable remote
connections using Name Pipes and TCP/IP.
3) I used C:WINDOWSsystem32cliconfg.exe to enable
Name Pipes and TCPIP to be enable on the client.
4) I enabled SQl Server Browser to help me with my
problem
5) I stopped the Database engine, enable local and
remote connections using Name pipes and TCP/IP,then I
restarted the database engine along with SQl server
Agent.
6) I did check SQl Server error logs to see what port
it was listening on , but I thought that SQl Server
was suppose to listen on port 1433 by default, and
Name pipes /SQL/query.
7)I have check the error logs to see what port that SQL Server was listening to
and trying to use the port number in the client config utility. I am still getting the same error.
8) I tried to remove name pipes in the SQL Server Surface Manager and allow local and remote connections using only TCP/IP. I still get the same error. I did stop and restarted the Database Engine.
What steps have I not taken , and what should I do to correct this problem?
View 7 Replies
ADVERTISEMENT
May 10, 2007
After applying the changes mentioned in KB 914277 to allow remote connections, while working in Visual Studio 2005, I'm now getting an error with the number 26: Error locating server/Instance specified...
Sure wish I knew what remote means in this scenario, as there is nothing "remote" about my installation. I only have 1 computer, the one i'm working on, where SQL Server and Visual Studio are installed, and no networks involved, so what is remote?
Any help would be appreciated!!
View 7 Replies
View Related
Jun 22, 2007
I have downloaded SQLServer2005SP2-KB921896-x86-ENU.exe and attempted to update to SP2 with no success.
SQL Server 2005 Developers Edition is installed on my computer as part of a Visual Studio 2005 installation.
When I try to run this package under my admin account, I get through the Feature Selection (selecting everything) to Authentication.
When I press the Test button or the Next button, I get "Your account information could not be verified. Press Ok to return to Authentication Mode screen to determine the reason for failure. For setup to verify your credentials the services must be startable, connectable, and you must be a SQL Server administrator."
The Authentication screen shows "Database Services, MSSQLSERVER, Windows, domainusername, Service Failed to Start"
I am a novice SQL Server user, Clearly I am floundering! Any observations, advice, or suggestions would be greatly appreciated.
View 1 Replies
View Related
Apr 8, 2008
Is it possible to connect SSRS running on SQL Server 2005 enterprise edition (our production system) to a database running on SQL Server 2005 Developer's edition (our test system)
thanks!
View 1 Replies
View Related
Jan 22, 2008
Hi
-I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine.
Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM.
I want to use partition function with the enterprise edition, will the trial version of sql server work for me?
-If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database?
- Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
Thanks
View 9 Replies
View Related
Dec 15, 2006
Dear All,We have a database which contains many tables which have millions ofrecords. When We attach the database with MS SQL Server 2005 StandardEdition Server and run some queries (having joins, filters etc.) thenthey take very long time to execute while when We execute same querieson Enterprise Edition then they run 10 times faster than on standardedition.Our database does not use any features which are present in EnterpriseEdition and not present in Standard Edition. We want to know what arethe differences between Standard Edition and Enterprise Edition forperformance. Why should we go for Enterprise Edition when StandardEdition has all the features required.We are presently using evaluation versions of SQL Server 2005 Standardand Enterprise Editions.Thanks and regards,Nishant Sainihttp://www.simplyjava.com
View 23 Replies
View Related
Apr 10, 2008
I am attempting to upgrade a 2005 Standard Edtion to Enterprise Edition. This is a default instance. All components are upgraded successfully except the Database Engine. I receive the following error:
SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and then run SQL Server Setup again.
This installation does not have encryption enabled, so I do not undersand the error or how to correct it.
After rebooting the SQL instance appears to be upgraded to Enterprise, but it cannot be upgraded to SP2.
Thanks,
View 3 Replies
View Related
May 20, 2008
We have an existing installation of SQL Server 2005 Developer Edition (64bit) that we are ready to go live with and would like to change the edition to Enterprise Edition (64bit). We have purchased all the appropriate licenses. We would like to avoid UN-installing the Developer Edition and RE-installing the Enterprise Edition. There must be some way to change a registry key, provide your serial number via a command line utility or re-run the setup with the license key provided and direct it to just change the edition from Developer to Enterprise and not change any of the other settings like service account, sa account, collation, etc. Any help is most appreciated.
Thank you,
Matt
View 1 Replies
View Related
Aug 10, 2006
Just getting started with mssql . . .
running mssql 2005 developers edition and will be using dreamweaver to develop sites . . . mssql documention states that the developers edition doesn't support remote access - does that mean that I have to have dreamweaver running on the same computer?
thanks,
elvis
View 4 Replies
View Related
Nov 9, 2007
Hi,
I would like to find out if there is any way to upgrade SQL Server 2000 (Ent) to 2005 (STD)
The Instance has many logins and jobs etc and I dont want to loose those
A document or some advice on how to go about it would help
Thanks
View 10 Replies
View Related
Aug 13, 2007
Hello,
I have been unable to create a replication from an SQL Server 2005 standard edition database to remote SQL Server 2005 Express Edition. The remote express edition is on a Virtual Private Server we are leasing from a hosting company. The name of the remote DB is similar to vs572.si-vs572.com. I can connect to this with SQL server authentication through Management Studio and also with SSIS. But, I have been unable to create a push subscription (I have tried a test push subscription with the same publication to a local SQL Express server here in our office and this works fine).
Here is the error message: SQL Server Replication requires the actual server name to make a connection to the server. Connections through server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'VS572SQLEXPRESS'.
The hosting company had originally installed a shared SQL server which would not support replication. They then installed SQL Express edition and I was hoping this would allow us to run a replication.
I tried to connect to VS572SQLEXPRESS with out any luck. I check the remote connections, made sure replication was installed, etc., but no luck.
Any help would be greatly appreciated!
Thank you,
Albert
View 6 Replies
View Related
Nov 16, 2006
I'm working on upgrading VB6-based application to employ SQL Server 2005 Express (it currently uses MSDE). I'm using the following connection string -
Provider=SQLNCLI;Persist Security Info=False;User ID=my_user;Password=my_password;Initial Catalog=my_database;Data Source=my_pc;Packet Size=8000
The application runs exceedingly slow. As soon as I uninstall SQL Server 2005 Express edition and install SQL Server 2005 Developers edition speed increases in 5 to 10 times. Once I uninstall SQL Server 2005 Developers edition and install SQL Server 2005 Express edition the application's speed drops again.
I have repeated this "cycle" several times: install express -> running slow -> removed express, installed developers -> running fast -> removed developers, installed express -> running slow -> removed express, installed developers -> running fast, etc. etc. etc.
Some SQL2005-related articles I read stated that Express edition equals in performance to other editions. This turns out to be untrue.
Anybody please suggest any explanation to this misfortune.
Thank you.
Eugene
View 7 Replies
View Related
Sep 3, 2007
Hello,
I have SQL Server 2005 express loaded on my webserver and I have loaded
SQL server studio manager on another terminal. When I try to
connect to the SQL Server it tells me that i can't and because the SQL
server does not allow remote connections. How do I fix that?
View 2 Replies
View Related
Sep 8, 2007
got the following error in my site. am using visual studio 2005 vb.net sql server 2005. my webhost (philhost.net) said that they support mssql server 2005. please help
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
Line 16: Dim myConnection As New SqlConnection(strConnString)Line 17: Line 18: myConnection.Open()Line 19: Line 20: Dim myTrans=myConnection.BeginTransaction()Source File: E:inetpubvhosts\httpdocsDefault.aspx.vb Line: 18 Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 _Default.Button1_Click(Object sender, EventArgs e) in E:inetpubvhostshttpdocsDefault.aspx.vb:18 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +174 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 11 Replies
View Related
Feb 6, 2007
Snehalata writes "i have one database at sql server 2000 and i have one database at sql server 2005. now i have added linked server to sql server 2005. i wish to access database located at sql server 2000 from sql server 2005 by creating a view in database located at sql server 2005. but when i access database located at sql server 2000 from sql server 2005 i get error message
OLE DB provider "SQLNCLI" for linked server "OLDPARTNER" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "OLDPARTNER" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
wat should be done?
its urgent"
View 1 Replies
View Related
Oct 11, 2006
Hello ,
The problem is that we are having Problem while making the remote Connection to the Sql Server 2005
Basically We are having a problem connecting to SQL2005 through a package remotely. when we try to connect to a remote data base, we get the following error
[Connection manager "CRA LRRS Development DB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ".
Although by running the configuration manager on the Remote DataBase System we have enable the Remote Connections through name and IP both but still it cant access it.
Please tell us the possible consequences and provide us the feedback.
I will be really obliged if any of you can provide us the feedback on it as soon as possible.
Thanking You,
Yours Sincerely,
Saima Salim
View 1 Replies
View Related
Nov 14, 2006
Hi there! I've been trying for several days now to configure SQL Server 2005 to allow remote connections, apparently, with no luck.
I always have this error message: Microsoft SQL Native Client: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I've followed the instructions at this link -> http://support.microsoft.com/?kbid=914277&SD=tech, but I have been having the same problems.
I've already adjusted my firewall settings.
What should I do?
Please help me...
View 2 Replies
View Related
Nov 23, 2006
I use ASP.NET 2.0 and VS.NET 2005.
I have the following expression in my code:
string connectionString = "server='localhost'; user id='sa'; password=''; Database='Northwind'";
When I executed the code I have the following error message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)."
The Microsoft Access was successfully connected in the Server Explorer window.
How do I solve this problem?
Thanks,
Andy.
View 3 Replies
View Related
Jan 17, 2007
Hello there,
I just deployed a new ASP.NET 2.0 website on a remote server http://www.alrazem.com/. and when i want to log on, or when any connection to the database happens!! the following error ocurs.
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Anyways, I searched the new. and i found this link: http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277... I followed the instructions and changed the Surface Area Configuration for Services and Connections to Local and remote connections. and Applied both protocols. Then redeployed the application. but the error still ocurs.
I didn't restart my machine after changing the SQL to remote. but i did the website from scratch again. and created a new connectionstring and database!!!
Any help? Thanks!
View 1 Replies
View Related
Jul 20, 2005
I just bought a copy of SQL Server 2000 (with service pack 3a) that Iintended to install and run on XP Pro. My concern is that the requirementslist on the box do not include XP or XP Pro. Will SQL Server 2000 developeredition run on XP Pro?
View 3 Replies
View Related
Feb 12, 2008
Does SQL Server 2005 Developers Edition come with Visual Studio Pro 2008? I know it did with Visual Studio Pro 2005.
If not, if I purchase SQL Server 2005 Developers Edition, can I install on the same machine as VS Pro 2008?
Will there be a Developer's edition to SQL Server 2008?
I realize I can't put databases I build into production with just the developer edition.
thanks
james
View 8 Replies
View Related
Feb 27, 2006
I've developed an asp.net 2.0 web app with vs 2005 and am using a SQL Server 2005 Express database. The app works fine locally, but after uploading to the remote web server the following error occures:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
How do I go about granting remote connections to SQL Server Express?
Does the web server have to have SQL Server Express installed in order to run apps that utilize SQL Server 2005 Express databases?
Do I grant access locally on my machine or do I have to be on the web server to grant remote connections?
I've been using .net 1.1 with access databases for the past couple of years, so this is all new to me.
Thanks.
View 27 Replies
View Related
Aug 15, 2006
Hello. I have SQLEXPRESS 2005 installed on my laptop running Windows XP Home Edition with SP2. I have an application that can connect to the local instance with no problem. The other day, I tried to configure SQLEXPRESS 2005 for a remote connection from my desktop. To date, I have been unable to figure out how to do this.
I have followed the instructions posted at various locations on the internet, but to no avail. While I can configure SQLEXPRESS 2005 to allow TCP/IP connections, I have been unable to restart the server.
Here is the pertinent snippet from the error log:
<time> Server A self-generated certificate was successfully loaded for encryption.
<time> Server Error: 26024, Severity: 16, State: 1.
2006-08-14 21:02:27.18 Server Server failed to listen on 'any' <ipv4> 0. Error: 0x277a. To proceed, notify your system administrator.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0xa.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0x1.
<time> Server Error: 17826, Severity: 18, State: 3.
<time> Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
<time> Server Error: 17120, Severity: 16, State: 1.
<time> Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I have a feeling this problem is due to the way my system is configured, not necessarily how my SQLEXPRESS 2005 is configured. My laptop and desktop are connected via a wireless router, and both machines are running Norton Anti-Virus 2006. I've added sqlserver.exe and sqlbrowser.exe to the exceptions list for the Worm protection on the laptop, i.e., the server machine. There's not a setting at the router that would prevent the server from re-starting, is there?
Any help is GREATLY appreciated!
Matt
View 15 Replies
View Related
Nov 13, 2007
Hi
As you know SQL Express by deefault accepts only local connections
For a particular requirement i have to change SQL Server Surface Area Configuration to accept remote connections by dos command
Anyone know this command?
thanks
Marco
View 16 Replies
View Related
Sep 27, 2007
PROBLEM:
SQL 2005 rejects connection from an ASP.net test webpage (shown below).
CONFIGURATION:
Internet > Concast Cable > Router > Sever01 Nic1 > Server01 SBS 2003 & SQL 2005 > Sever01 Nic2 > Switch > Local Area
Linksys Router WRV54G( Firmware Version: 2.39.2): Port Range Forwarding TCP 1433 and UDP 1434
Small Business Server 2003 Premium (Server Name: Server01)
Two network cards: Internet Ionnection and Local Area Network
Ran: Configure E-mail And Internet Connection Wizzard
Ran: Remote Access Wizzard (disables access to Windows Firewall)
Note: Remote workplace, Outlook Web Access, Sharepoint, etc, on ports 443,444, 3389, 4125 All work remotely - so Linksys router and RRAS port settings are working.
Routing And Remote Access(RRAS) >NAT/Basic Firewall > Internet Ionnection > Services And Ports
Added TCP Incoming Port 1433, Private Address 127.0.0.1, Outgoing Port 1433
Added UDP Incoming Port 1434, Private Address 127.0.0.1, Outgoing Port 1434
SQL Server 2005 Standard Edition version 9.0.3042 (installed on same machine, default instance ID MSSQLSERVER)
By default: TCP protocol is enabled and local remote connections are enabled on standard Edition. Also by default: MSSQLSERVER automatic/started/running and SQL Server Browser automatic/started/running
Ran: SQL Server 2005 Surface Area Configuration to confirm MSSQLSERVER instance settings are running.
Using: SQL Server Authentication: Login and Password
"sa" is a default account that works locally.
SQL Server Configuration Manager:
MSSQLSERVER protocols: Share Memory and TCP/IP enabled
TCP port 1433 by default (confirmed listening by ERRORLOG)
Microsoft SQL Server Management Studio
Database Engine lists SERVER01 (instead of SERVER01MSSQLSERVER - the default instance is not named explicitly)
Created database "Test" under SERVER01 > Databases.
Created table "tblCategories" in "Test" (included some fields and data)
Server-Side Successful?
netstat -ano | findstr 1433
TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING 2004
Client-Side
Ping Successful
ping <xxx.xxx.xxx.xxx>
Telnet Successful (blank screen)
telnet <xxx.xxx.xxx.xxx> <port#>
TEST ASP.net Web Page Button Sub
I have this button on a page at Godaddy.com connecting to an instance of MS SQL provided by Godaddy and there is no problem connecting to that SQL Server.
Public Sub TestSQL_Click(Sender As Object, e As EventArgs)
Dim rdr As SqlDataReader = Nothing
Dim conn As SqlConnection = new SqlConnection("Data Source=tcp:xxx.xxx.xxx.xxx; Initial Catalog=Server01 blCategories; User ID=sa; Password=xxx")
conn.Open()
Dim cmd As SqlCommand = new SqlCommand("SELECT Category FROM tblCategories;", conn)
rdr = cmd.ExecuteReader()
rdr.Close()
conn.Close()
End Sub
ERROR:
The follworing error occurs or variations of it depending on different connection string configurations:
Occurs at: conn.Open()
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
THOUGHTS
Possibly a bad connection string or Microsoft security issue.
I've attempted many other connection string formats such as:
Dim conn As SqlConnection = new SqlConnection("Data Source=xxx.xxx.xxx.xxx,1433;
Network Library=DBMSSOCN; Initial Catalog=Server01Test; User ID=sa; Password=xxx")
But I continue to receive connection failure messages (or invalid connection string errors for incorrectly formed connection strings).
I've tried disabling RRAS and Windows Firewall and the same errors resulted.
Any feedback would be appreciated.
View 29 Replies
View Related
Jul 6, 2007
Working on some performance issues at the database end, our team observed, that the query execution done by SQL Server 2005 was done by using only one processor in our application. The stored procedures are written in T-SQL and have a dedicated Database Server, running SQL Server 2005.
Our tests lead to the following observations;
SQL Server 2005 Enterprise Edition was executing stored procedures using only 1 processor, when it is a multiple processor Server.
Apart from this the stored procedure execution is very linear.
We would like to have your suggestions on the same.
Regards,
Girish
View 6 Replies
View Related
Jul 29, 2006
if i upgrade from sql server 2005 expressto sql server 2005 enterprise can i do it ?
am i need to uninstall 2005 express before ?
View 1 Replies
View Related
Aug 23, 2006
Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
View 25 Replies
View Related
May 3, 2007
Hello ,everyone.
I have tried to setup SQL Server 2005(Enterprise Edition) in my computer with the operation system of Windows XP(Home Edition). But I failed. It was shown that IIS is a necessary component.Why need IIS for Setuping SQL Server 2005(Enterprise Edition) ?
Thanks in advance!
View 6 Replies
View Related
May 2, 2008
Dear all,
This VHD consists of 6 downloads of files. I have download it several times, but when it always has crc error when extracting part2's rar. Does anyone also encounter this problem? Is there any solution?
Thank you!
View 4 Replies
View Related
Apr 30, 2007
Hi all,
I can't get SQL Server 2005 Enterprise Edition working on my notebook with Windows Vista Business Edition. I installed SQL Server 2005 Enterprise Edition and then i ran SP2 for SQL Server EE.
But now when i a am trying to connect to any server from SQL SERVER MANAGEMENT STUDIO i can't see any Server in Server Name list. When I click on Browse for more, I don't see any server. I am able to get Network servers.
While installing the SQL SERVER all the features were disabled as it is, then i went to advanced and selected all the options.
Any suggestions are apperiacted in advance.
Regards,
Syed Abbas Naqvi
Sr. Software Developer.
View 6 Replies
View Related
May 29, 2006
I am download new Microsoft SQL Server 2005 Enterprise Evaluation Edition.. but how run it?
SQL Server Management is not enough!
View 1 Replies
View Related
Jan 8, 2007
Hi Dudes,
I need a clean link for MSSQL Server 2005 Enterprise Edition download except Microsoft site. I already downloaded from it, burned the downloaded image, but the problem is that sql.cab and some other cab files got corrupted and some components became unable to install. I tried and installed it without some components. So anybody can help me in getting a proper link.
And one more thing, i downloaded from the microsoft site itself with file size around 890MB. So give me link which works 100% or those who have tried and got 100% result.
Thanx,
BP.
View 6 Replies
View Related