Hi We have SQL6.5 servers with serpack3. I have registered the remote sql servers on both sqlservers. I have login name as same and trusted.(by the way I did this through GUI)
when I run a remote procedure it comes and tell me
**********************************************
DB-Library: Unexpected EOF from SQL Server. General network error. Check your documentation.
Net-Library error 10054: ConnectionCheckForData ((null)()).
DB-Library Process Dead - Connection Broken
*************************************************
???????
in some servers I did the same configuration it works fine.
All the servers are configured Uniqly. Protocols and dblib were same.
Can anyone Please...Please>>please explain how to configure this or is there any other way to execute a remote procedure.......?????
I really, infact really appreciate any help regarding this.
Thanks a lot.
Hi, In my localmachine everything is working fine. But online only Update, Delete and Select statements are working correctly, while INSERT doesn't work and I got a similar error to this when I try to insert any data into any table: Server Error in '/' Application.
Cannot insert the value NULL into column 'messageId', table 'db.dbo.mail'; column does not allow nulls. INSERT fails.The statement has been terminated. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'messageId', table 'db.dbo.mail'; column does not allow nulls. INSERT fails.The statement has been terminated.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433 So wat's wrong? Note:1-The Insert statement work correctly in localmachine.2-The application and the sql database are both in remote hosts.3-The application configuration had been checked and is correct.
Im getting quite desperate and frustrated!! I have installed SQL 2005 Express successfully and can connect to it fine using Management Studio locally.
If I try and connect remotely using Management Studio Im getting the old Error 10061 : The machine actively refused the connection!
I have set it up exactly as per all documentation and help from the forums. Remote connections is on TCP and Named Pipes, I even have the firewall disabled.
Im running it on Windows Server 2003 Standard.
Any help would be really apriciated as i have tried everything!!!
I have a SQL Server 2000 cluster running on x64 OS. I found the threads in the forum to run perfmon locally by using the x86 version of perfmon (mmc /32 perfmon). However, I cannot run a perfmon remotely from another machine and see the SQL Server perfmon data on any of the nodes in the cluster. The remote perfmon picks up all of the other perfmon variables but no SQL.
I found another thread where somebody asked this question but it wasn't answered. Thanks in advance.
I need some assistance with getting service broker to work across servers. I have 2 separate servers and I am trying to send a message from one server to the other. No error is generated when sending the message and I get no records in the transmission queue of the sending server, however the message does not arrive on the receiving server. Where is the message going?
Here is the code I use to create the service broker objects that are being used€¦
RUN THIS ON THE SENDING SERVER:
CREATE MESSAGE TYPE [MyMessage] VALIDATION = NONE CREATE MESSAGE TYPE [MyResponse] VALIDATION = NONE GO
CREATE CONTRACT [MyContract] ( MyMessage SENT BY INITIATOR, MyResponse SENT BY TARGET) GO
CREATE QUEUE [MyInitiatorQueue] with status = ON CREATE QUEUE [MyTargetQueue] with status = ON GO
CREATE SERVICE [MyInitiatorService] ON QUEUE [MyInitiatorQueue] GO
CREATE ROUTE [RouteToODS] WITH SERVICE_NAME = N'MyTargetService', BROKER_INSTANCE = '1BB213E2-67A7-4059-BAF8-D9B5F31E358E', ADDRESS = N'TCP://CONSULT01:4022' GO
CREATE ENDPOINT DWHEndPoint STATE = STARTED AS TCP (LISTENER_PORT = 4022) FOR SERVICE_BROKER ( AUTHENTICATION = WINDOWS, ENCRYPTION = DISABLED) GO
RUN THIS ON THE RECEIVING SERVER:
CREATE MESSAGE TYPE [MyMessage] VALIDATION = NONE CREATE MESSAGE TYPE [MyResponse] VALIDATION = NONE GO
CREATE CONTRACT [MyContract] ( MyMessage SENT BY INITIATOR, MyResponse SENT BY TARGET) GO
CREATE QUEUE [MyInitiatorQueue] with status = ON CREATE QUEUE [MyTargetQueue] with status = ON GO
CREATE SERVICE [MyTargetService] ON QUEUE [MyTargetQueue] ([MyContract]) GO
CREATE ROUTE [RouteToDWH] WITH SERVICE_NAME = N'MyInitiatorService', BROKER_INSTANCE = 'F0BF4E80-704E-4CFE-80FC-637A1EC128C5', ADDRESS = N'TCP://DWH:4022' GO
CREATE ENDPOINT ODSEndPoint STATE = STARTED AS TCP (LISTENER_PORT = 4022) FOR SERVICE_BROKER ( AUTHENTICATION = WINDOWS, ENCRYPTION = DISABLED) GO
SEND A MESSAGE USING THE FOLLOWING:
Declare @ConversationHandle uniqueidentifier
Begin Transaction Begin Dialog @ConversationHandle From Service [MyInitiatorService] To Service 'MyTargetService' On Contract [MyContract] With Encryption = Off, Lifetime = 600;
Send on Conversation @ConversationHandle Message Type [MyMessage] (N'This is a my message')
End Conversation @ConversationHandle Commit Select GET_TRANSMISSION_STATUS(@ConversationHandle)
I was trying to send a message on a different instance in the network using service broker. I have created the endpoint and route both the side. I could see that the messages are in the transmission_queue in the sender side with no error in the status.
What could be the reason.
I am doing the following: CREATE ROUTE inst02 WITH SERVICE_NAME = 'SERVICE2', ADDRESS = 'tcp://10.14.43.149:2341'
in the send script i am using this: BEGIN DIALOG CONVERSATION @dialog_handle FROM SERVICE [SERVICE1] TO SERVICE 'SERVICE2' ON CONTRACT [MainContract] WITH ENCRYPTION = OFF ;
in the sending side if i change the endpoint's authentication as windows kerberos , then i get thefollowing error in the transmission queue:
"Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 66."
I also have given access to the remote user on this endpoint(on the recever side) using this : GRANT CONNECT ON ENDPOINT::Endpoint_test to paras
I am executing the sending side send script using the same user wich has access to the remote endpoint.
I am preparing SSIS package programmetically using C#, in a web wethod, to perform fuzzy lookup and other transformations in to sql server data.
now situaltion is like this,
there are three system (independent m/cs)
m/c 1 :- webserver
m/c 2 :- sql database (sqlserver)
m/c 3 :- client (it can be any where , we are using onc click deplyment)
Now case is like this.
A user sitting at m/c no. 3 (a thin client) has one-click-deployed application, clicks the button "Create SSIS Package" , which sends this message to webserver (i.e. m/c 2 ) where C# code constructs the package programmatically,
there are three component inside package
1. oldedb Source (a sql server table -- sqlserver is at m/c no 3)
2. fuzzylookup component
3. oledb destination (a sql server table -- sqlserver is at m/c no 3)
Now 1 and 3 component of the package need to connect to sqlserver for initialization there metadata from actual tables.
// Tries to connect to sqlserver hosted at different m/c
srcDesignTime.AcquireConnections(null);
srcDesignTime.ReinitializeMetaData();
srcDesignTime.ReleaseConnections();
now the 3rd last line which says srcDesignTime.AcquireConnections(null);
tries to open the connection to the selserver (in order to get information abt actual table and its columns) which is installed at another m/c, and this is possible cause of error (i think !!)
there are two cases in one case i am getting an error and in second case it is working just fine..
case 1. If i use (local webservice) web service to create package it works.
case 2 if i use published (on local IIS ) webservice to create package, It fails (at the code srcDesignTime.AcquireConnections(null); )
so i think problem is related to some authorization, may be i am wrong !!1
Please help me.
thanks in advance
Pradeep
(I am really looking for a reply for MR. Jamie Thomson )
I am having problem creating/copying "txt" file in a remote machine by using the "exec master..xp_cmdshell" command in query analyzer. For example, we are getting errors for the following command:
I am having problem creating/copying "txt" file in a remote machine by using the "exec master..xp_cmdshell" command in query analyzer. For example, we are getting errors for the following command:
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Help Stored procedure working but not doing anything New Post Quote Reply Please i need some help.
I am calling a stored procedure from asp.net and there is a cursor in the stored procedure that does some processing on serval tables.
if i run the stored procedure on Query Analyzer it works and does what it is suppose to do but if i run it from my asp.net/module control it goes. acts likes it worked but it does not do what is suppose to do. i believe the cursor in the stroed procedure does not run where is called programmatically from the asp.net/module control page.plus it does not throw any errors
This is the code from my control System.Data.SqlClient.SqlParameter [] param={new System.Data.SqlClient.SqlParameter("@periodStart",Convert.ToDateTime(startDate)),new System.Data.SqlClient.SqlParameter("@periodStart",Convert.ToDateTime(endDate)),new System.Data.SqlClient.SqlParameter("@addedby",UserInfo.FullName+ " "+UserInfo.Username)};
set @NoOfDeadPensioners=0 set @NoOfEnrolledPensioners=0 set @DeactivatedPensioners=0 set @actionType ="PayList Generation"
DECLARE paylist_cursor CURSOR FORWARD_ONLY READ_ONLY FOR
select p.pensionerId,p.isAlive,p.isActive,py.currentMonthlypension from pensioner p left outer join pensionpaypoint py on p.pensionerid=py.pensionerId
where p.isActive = 1
OPEN paylist_cursor
FETCH NEXT FROM paylist_cursor INTO @pensioner_id,@isAlive,@isActive,@currentMonthlypension
WHILE @@FETCH_STATUS = 0 BEGIN
set @NoOfLoadedPensioners=@NoOfLoadedPensioners+1 if(@isAlive=0) begin update Pensioner set isActive=0 where pensionerid=@pensioner_id set @DeactivatedPensioners =@@ROWCOUNT+@DeactivatedPensioners set @NoOfDeadPensioners =@@ROWCOUNT+@NoOfDeadPensioners end else begin insert into pensionpaylist(pensionerId,dateAdded,addedBy, periodStart,periodEnd,amountPaid) values(@pensioner_id,getDate(),@addedby, @periodStart, @periodEnd,@currentMonthlypension) set @NoOfEnrolledPensioners =@@ROWCOUNT+ @NoOfEnrolledPensioners end
-- Get the next author. FETCH NEXT FROM paylist_cursor INTO @pensioner_id,@isAlive,@isActive,@currentMonthlypension END
CLOSE paylist_cursor DEALLOCATE paylist_cursor
set @reportSummary ="The No. of Pensioners Loaded: "+Convert(varchar,@NoOfLoadedPensioners)+"<BR>"+"The No. Of Deactivated Pensioners: "+Convert(varchar,@DeactivatedPensioners)+"<BR>"+"The No. of Enrolled Pensioners: "+Convert(varchar,@NoOfEnrolledPensioners)+"<BR>"+"No Of Dead Pensioner from Pensioners Loaded: "+Convert(varchar,@NoOfDeadPensioners) insert into reportSummary(dateAdded,hasExceptions,periodStart,periodEnd,reportSummary,actionType) values(getDate(),0, @periodStart, @periodEnd,@reportSummary,'Pay List Generation')
if (@@ERROR <> 0) BEGIN
insert into reportSummary(dateAdded,hasExceptions,periodStart,periodEnd,reportSummary,actionType) values(getDate(),1, @periodStart,@periodEnd,@reportSummary,'Pay List Generation')
we use alter statements for our stored procedures when rolling out a new version of our app. We have noticed that when viewing the stored proc in production it looks like the altered one, but when the app runs it, the changes are not taking effect. Has any one else experienced anything like this? It's like the old version is still being held on too.
To get around the problem we have been dropping and recreating the procedures.
I have this select statement: SELECT * FROM [enews] WHERE ([name_nws] LIKE '%" + strSearch + "%' OR [title_nws] LIKE '%" + strSearch + "%'OR [sub_nws] LIKE '%" + strSearch + "%' OR [sum_nws] LIKE '%" + strSearch + "%' OR [content_nws] LIKE '%" + strSearch + "%')
This statement works fine but when I turned it into a store procedure, it returns nothing. I created the store procedure as follows: SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO -- ============================================= -- Author: <Author,,Name> -- Create date: <Create Date,,> -- Description: <Description,,> -- ============================================= CREATE PROCEDURE sqlSearch -- Add the parameters for the stored procedure here @strSearch varchar(250) AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON;
-- Insert statements for procedure here WHERE ([name_nws] LIKE '%" + @strSearch + "%' OR [title_nws] LIKE '%" + @strSearch + "%'OR [sub_nws] LIKE '%" + @strSearch + "%' OR [sum_nws] LIKE '%" + @strSearch + "%' OR [content_nws] LIKE '%" + @strSearch + "%') END GO
Hi can someone tell me whats wrong with this stored procedure. All im trying to do is get the publicationID from the publication table in order to use it for an insert statement into another table. The second table PublicaitonFile has the publicaitonID as a foriegn key. Stored procedure error: cannot insert null into column publicationID, table PublicationFile - its obviously not getting the ID. ALTER PROCEDURE dbo.StoredProcedureUpdateDocLocField @publicationID Int=null,@title nvarchar(MAX)=null,@filePath nvarchar(MAX)=null ASBEGINSET NOCOUNT ON IF EXISTS (SELECT * FROM Publication WHERE title = @title)SELECT @publicationID = (SELECT publicationID FROM Publication WHERE title = @title)SET @publicationID = @@IDENTITYEND IF NOT EXISTS(SELECT * FROM PublicationFiles WHERE publicationID = @publicationID)BEGININSERT INTO PublicationFile (publicationID, filePath)VALUES (@publicationID, @filePath)END
Having a little trouble not seeing why this insert is not happening.... --snip-- DECLARE c_studId CURSOR FOR SELECT studentId FROM students FOR READ ONLY OPEN c_studId FETCH NEXT FROM c_studId INTO @studentId IF( @@FETCH_STATUS = 0 ) BEGIN SET @studRec = 'Found' END CLOSE c_studId DEALLOCATE c_studId BEGIN TRAN IF (@studRec <> 'Found') BEGIN INSERT INTO students (studentId) VALUES (@studentId) END Well, you get the idea, and I snipped a lot of it.Why is it not inserting if the user is not found?Thanks all,Zath
I have a SP below that authenticates users, the problem I have is that activate is of type BIT and I can set it to 1 or 0. If I set it to 0 which is disabled, the user can still login. Therefore I want users that have activate as 1 to be able to login and users with activate as 0 not to login
Hi there below is my code for a sproc. however when i run it, it doesnt seem to create a table
USE [dw_data] GO /****** Object: StoredProcedure [dbo].[usp_address] Script Date: 10/24/2007 15:33:21 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO
CREATE PROC [dbo].[usp_address] ( @TableType INT = null
)
AS
IF @TableType is NULL OR @TableType = 1
BEGIN
IF NOT EXISTS (SELECT 1 FROM [DW_BUILD].INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'address')
Hi All,I am trying to write a basic stored procedure to return a range ofvalues but admit that I am stumped. The procedure syntax used is:ALTER PROCEDURE Rpt_LegacyPurchaseOrderSp(@StartPoNumber PONumberType = 'Null',@FinishPoNumber PONumberType = 'Null')ASSET @StartPoNumber = 'PO_NUMBER_POMSTR'SET @FinishPoNumber = 'PO_NUMBER_POMSTR'SELECTIPPOMST_SID,--Start tbl_IPPOMSTPO_NUMBER_POMSTR,VENDOR_NUMBER_POMSTR,SHIP_NUMBER_POMSTR,CHANGE_ORDER_POMSTR,FOB_POINT_POMSTR,ROUTING_POMSTR,DATE_ISSUED_POMSTR,DATE_LAST_RECPT_POMSTR,CONTACT_PERSON_1_POMSTR,PREPAID_COLLECT_POMSTR,TERMS_POMSTR,AMOUNT_ESTIMATED_POMSTR,AMOUNT_RECEIVED_POMSTR,AMOUNT_PAID_POMSTR,LOCATION_CODE_POMSTR,SHIPPING_POINT_POMSTR,PRINT_IND_POMSTR,BUYER_POMSTR,SHIPMENT_POMSTR,STATUS_POMSTR,CURRENCY_POMSTR,CURRENCY_STATUS_POMSTR,AMOUNT_EST_CUR_POMSTR,AMOUNT_REC_CUR_POMSTR,AMOUNT_PAID_CUR_POMSTR,--Finish tbl_IPPOMSTIPPOITM_SID,--Start tbl_IPPOITMPO_NUMBER_POITEM,ITEM_NUMBER_POITEM,CATEGORY_POITEM,DESCRIPTION_POITEM,VENDOR_NUMBER_POITEM,DATE_ORIGINAL,DATE_RESCHEDULED,ACCOUNT_NUMBER_POITEM,STOCK_NUMBER_POITEM,JOB_NUMBER_POITEM,RELEASE_WO_POITEM,QUANTITY_ORDERED_POITEM,QUANTITY_RECVD_POITEM,UOM_POITEM,UNIT_WEIGHT_POITEM,UNIT_COST_POITEM,EXTENDED_TOTAL_POITEM,MATERIAL_NUMBER_POITEM,COMPLETE_POITEM,LOCATION_CODE_POITEM,INSPECTION_POITEM,BOM_ITEM_POITEM,COST_ACCOUNT_POITEM,CHANGE_ORDER_POITEM,TAX_CODE_POITEM,ISSUE_CODE_POITEM,QUANTITY_INSPECT_POITEM,EXC_RATE_CURR_POITEM,UNIT_COST_CURR_POITEM,EXTENDED_TOTAL_CURR_POITEM,PLANNER_POITEM,BUYER_POITEM--Finish tbl_IPPOITMIPVENDM_SID,--Start tbl_IPVENDMVENDOR_NUMBER_VENMSTR,VENDOR_NAME_VENMSTR,ADDRESS_LINE_1_VENMSTR,ADDRESS_LINE_2_VENMSTR,ADDRESS_LINE_3_VENMSTR,CITY_VENMSTR,STATE_VENMSTR,ZIP_CODE_VENMSTR,COUNTRY_VENMSTR--Finish tbl_IPVENDMFROM tbl_IPPOMSTJOIN tbl_IPPOITMON tbl_IPPOITM.PO_NUMBER_POITEM = tbl_IPPOMST.PO_NUMBER_POMSTRJOIN tbl_IPVENDMon tbl_IPVENDM.VENDOR_NUMBER_VENMSTR = tbl_IPPOMST.VENDOR_NUMBER_POMSTRWHERE tbl_IPPOMST.PO_NUMBER_POMSTR >= @StartPoNumber ANDtbl_IPPOMST.PO_NUMBER_POMSTR <= @FinishPoNumberBasically, no rows are returned for the valid (records in database)range I enter. I have been troubleshopoting the syntax. This hasinvolved commenting out references to @FinishPoNumber so in effect Ijust pass in a valid PO Number using @StartPoNumber parameter. Thisworks in terms of returning all 76545 PO records.Can anyone help me to identify why this syntax will not return a rangeof PO records that fall between @StartPoNumber and @FinishPoNumber?Any help would be greatly appreciated.Many Thanks*rohan* & Merry Christmas!
Juste have fun with the following, if you can manage this out your my savior, been wasting far too much time on it, tried a couple of method and none ever worked. Conversion from type 'DBNull' to type 'String' is not valid.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Conversion from type 'DBNull' to type 'String' is not valid.Source Error:
Line 105:Line 106: Protected Sub sdsProprActionAJO_Inserted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceStatusEventArgs) Handles sdsProprActionAJO.InsertedLine 107: Dim MessageSysteme As String = CType((CType(e.Command.Parameters("SQL_MSG"), IDbDataParameter)).Value, String)Line 108: End SubLine 109: With sdsProprActionAJO .ConnectionString = ConfigurationManager.AppSettings("DB_CS_MSSQL") .InsertCommandType = SqlDataSourceCommandType.StoredProcedure .InsertCommand = "dbo.sp_adm_cartListe" .InsertParameters.Clear() .InsertParameters.Add("Mode", TypeCode.String, "SEL") .InsertParameters.Add("LPR_Groupe", TypeCode.String, CBool(CType(Me.pnlProprActionAJO.FindControl("rblProprActionAJOGroupe"), RadioButtonList).SelectedValue)) .InsertParameters.Add("LPR_Etiquette", TypeCode.String, CType(Me.pnlProprActionAJO.FindControl("tbProprActionAJOEtiquette"), TextBox).Text) .Insert() End With End Sub Protected Sub sdsProprActionAJO_Inserted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceStatusEventArgs) Handles sdsProprActionAJO.Inserted Dim MessageSysteme As String = CType((CType(e.Command.Parameters("SQL_MSG"), IDbDataParameter)).Value, String) End Sub Protected Sub sdsProprActionAJO_Inserting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceCommandEventArgs) Handles sdsProprActionAJO.Inserting Dim Param As System.Data.SqlClient.SqlParameter = New System.Data.SqlClient.SqlParameter() param.DbType = DbType.String param.Direction = ParameterDirection.Output param.ParameterName = "SQL_MSG" e.Command.Parameters.Add(Param) End Sub CREATE PROCEDURE [dbo].[sp_Adm_Proprietes_AJO](@MODE VARCHAR(3),@LPR_Groupe BIT = NULL,@LPR_Etiquette NVARCHAR(32) = NULL,@RPP_LPR_IdParent [INT] = NULL,@RPP_LPR_IdEnfant [INT] = NULL,@SQL_MSG NVARCHAR(8) OUTPUT)AS--DECLARE @SQL_TEMP NVARCHAR(4000)DECLARE @INT_TEMP [INT]--IF @MODE = 'RRP'BEGIN INSERT INTO t__REL__PropParent_PropEnfant ( RPP_LPR_IdParent, RPP_LPR_IdEnfant ) VALUES ( @RPP_LPR_IdParent, @RPP_LPR_IdEnfant )END--IF @MODE = 'LPR'BEGIN IF NOT @LPR_Etiquette = NULL BEGIN SELECT * FROM t_Lib_Proprietes WHERE (LPR_Groupe = @LPR_Groupe ) AND (LPR_Etiquette = @LPR_Etiquette ) IF @@ROWCOUNT <= 0 BEGIN INSERT INTO t_Lib_Proprietes ( LPR_Groupe, LPR_Etiquette ) VALUES ( @LPR_Groupe, @LPR_Etiquette ) SET @SQL_MSG = 'CON_000A' END ELSE BEGIN SET @SQL_MSG = 'ERR_000A' END END ELSE BEGIN SET @SQL_MSG = 'ERR_003A' ENDENDRETURN @SQL_MSGGO
OK, I have been raking my brains with this and no solution yet. I simply want to update a field in a table given the record Id. When I try the SQL in standalone (no sp) it works and the field gets updated. When I do it by executing the stored procedure from a query window in the Express 2005 manager it works well too. When I use the stored procedure from C# then it does not work: 1. ExecuteNonQuery() always returns -1 2. When retrieving the @RETURN_VALUE parameter I get -2, meaning that the SP did not find a matching record. So, with #1 there is definitely something wrong as I would expect ExecuteNonQuery to return something meaningful and with #2 definitely strange as I am able to execute the same SQL code with those parameters from the manager and get the expected results. Here is my code (some parts left out for brevity):1 int result = 0; 2 if (!String.IsNullOrEmpty(icaoCode)) 3 { 4 icaoCode = icaoCode.Trim().ToUpper(); 5 try 6 { 7 SqlCommand cmd = new SqlCommand(storedProcedureName);(StoredProcedure.ChangeAirportName); 8 cmd.Parameters.Add("@Icao", SqlDbType.Char, 4).Value = newName; 9 cmd.Parameters.Add("@AirportName", SqlDbType.NVarChar, 50).Value = (String.IsNullOrEmpty(newName) ? null : newName); 10 cmd.Parameters.Add("@RETURN_VALUE", SqlDbType.Int).Direction = ParameterDirection.ReturnValue; 11 cmd.Connection = mConnection; // connection has been opened already, not shown here 12 cmd.CommandType = CommandType.StoredProcedure; 13 int retval = cmd.ExecuteNonQuery(); // returns -1 somehow even when RETURN n is != -1 14 result = (int)cmd.Parameters["@RETURN_VALUE"].Value; 15 16 } 17 catch (Exception ex) 18 { 19 result = -1; 20 } 21 }
And this is the stored procedure invoked by the code above:1 ALTER PROCEDURE [dbo].[ChangeAirfieldName] 2 -- Add the parameters for the stored procedure here 3 @Id bigint = null,-- Airport Id, OR 4 @Icao char(4) = null,-- ICAO code 5 @AirportName nvarchar(50) 6 AS 7 BEGIN 8 -- SET NOCOUNT ON added to prevent extra result sets from 9 -- interfering with SELECT statements. 10 SET NOCOUNT ON; 11 12 -- Parameter checking 13 IF @Id IS NULL AND @Icao IS NULL 14 BEGIN 15 RETURN -1;-- Did not specify which record to change 16 END 17 -- Get Id if not known given the ICAO code 18 IF @Id IS NULL 19 BEGIN 20 SET @Id = (SELECT [Id] FROM [dbo].[Airports] WHERE [Icao] = @Icao); 21 --PRINT @id 22 IF @Id IS NULL 23 BEGIN 24 RETURN -2;-- No airport found with that ICAO Id 25 END 26 END 27 -- Update record 28 UPDATE [dbo].[Airfields] SET [Name] = @AirportName WHERE [Id] = @Id; 29 RETURN @@ROWCOUNT 30 END
As I said when I execute standalone UPDATE works fine, but when approaching it via C# it returns -2 (did not find Id).
I've got a stored procedure in database A that calls the sp_start_job stored procedure in msdb as follows:
CREATE PROCEDURE xxxxx WITH EXECUTE AS 'domainusername'
AS
EXEC msdb.dbo.sp_start_job B'jobname' ;
RETURN
The domainusername is the in the database sysadmin role and the owner of the job. To make this work originally, I had to change the msdb database to be trusted.
This worked for the past several months.
Now it doesn't work (perhaps after a reboot but not sure). The error I get is "The EXECUTE permission was denied on the object 'sp_start_job', database 'msdb', schema 'dbo'
I looked to make sure that the account had grant execute rights and it does. I tried setting it via GRANT statement and it was granted successfully yet the error still occurs. I've tried changing accounts and anything else I can think of to no avail.
Any ideas how to troubleshoot this issue. I've tried all the tricks I can think of.
I am having a problem with this stored procedure. I'm using SQL Server 2005 Developer's edition and if I execute the procedure in a query window, I get no errors. Also, when the script runs from a website call there are no errors. The problem is that it doesn't return the information that is in the database. It is supposed to return the orders from Washington state between such and such dates. The orders are there in the database, so I think the where clause must be wrong.
Thanks for the help.
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[CommerceLibOrdersGetWashingtonState]') AND type in (N'P', N'PC'))
Hi! We are using Delphi application to call stored procedure remotely. With SQL Server 6.5 everything worked perfectly. After upgrate to SQL Server 7.0 the following error message appear: Can't find stored procedure. When I open SQL Ent.Manager and run stored procedure locally, there is no problem exist. Thank you in advance. Anny
I need to execute the stored procedure/sql statement from different sql server.I have described below, what i have done to do this...if it is not the correct process, please let me know the correct one.....thanks
I have added the remote server on local server by using the following....
I have a SQL2000(sp2) database (ServerA) and a SQL7(sp2) database(ServerB) From the SQL2000 database I want to call a remote stored procedure on ServerB and store the result set in a table on ServerB.
E,g
insert TableA exec ServerB...sp_GetStuff
If I try this by making serverB a remote server, I get the following error message Server: Msg 18456, Level 14, State 1, Line 1 Login failed for user 'sa'. If I make ServerB a Linked server, I get the error Server: Msg 8501, Level 16, State 1, Line 1 MSDTC on server '' is unavailable. Server: Msg 7391, Level 16, State 1, Line 1 The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
Now the MSDTC on ServerB won't start - It returns error 3221229574 to which the solution seems to be to reinstall MSDTC which looks like a very messy job with registry hacks and also the threat of reformatting the hard drive So I don't want to do this if possible
I really don't want a distibuted transaction anyway so I tried to stop the transaction being promoted using SET REMOTE_PROC_TRANSACTIONS OFF
Creating a temporary table in stored procedure and using a sql query to insert the data in temp. table.I am facing the error as : String or binary data would be truncated.The statement has been terminated. The procedure i created is as : ALTER PROCEDURE fetchpersondetails AS CREATE Table #tempperson (personID int,FirstName nvarchar(200),LastName nvarchar(250),title nvarchar(150),Profession nvarchar(200),StreetAddress nvarchar(300), StateAddress nvarchar(200),CityAddress nvarchar(200),CountryAddress nvarchar(200),ZipAddress nvarchar(200),Telephone nvarchar(200),Mobile nvarchar(200), Fax nvarchar(200),Email nvarchar(250),NotesPub ntext,Affiliation nvarchar(200),Category nvarchar(200))
Insert into #tempperson SELECT dbo.tblperson.personID, ISNULL(dbo.tblperson.fName, N'') + ' ' + ISNULL(dbo.tblperson.mName, N'') AS FirstName, dbo.tblperson.lname AS LastName, dbo.tblperson.honor AS Title, dbo.tblperson.title AS Profession, dbo.tblperson.street + ' ' + ISNULL(dbo.tblperson.suite, N'') AS StreetAddress, dbo.tblperson.city AS cityaddress, dbo.tblperson.state AS stateaddress, dbo.tblperson.postalCode AS zipaddress, dbo.tblperson.Phone1 + ',' + ISNULL(dbo.tblperson.Phone2, N'') + ',' + ISNULL(dbo.tblperson.Phone3, N'') AS Telephone, dbo.tblperson.mobilePhone AS mobile, dbo.tblperson.officeFax + ',' + ISNULL(dbo.tblperson.altOfficeFax, N'') + ',' + ISNULL(dbo.tblperson.altOfficeFax2, N'') AS Fax, ISNULL(dbo.tblperson.Email1, N'') + ',' + ISNULL(dbo.tblperson.Email2, N'') + ',' + ISNULL(dbo.tblperson.Email3, N'') AS Email, dbo.tblperson.notes AS NotesPub, dbo.tblOrganizations.orgName AS Affiliation, dbo.tblOrganizations.orgCategory AS Category, dbo.tblCountry.countryNameFull AS countryaddress FROM dbo.tblperson INNER JOIN dbo.tblOrganizations ON dbo.tblperson.orgID = dbo.tblOrganizations.orgID INNER JOIN dbo.tblCountry ON dbo.tblperson.countryCode = dbo.tblCountry.ISOCode
I am trying to follow an exercise for debugging a stored procedure in the .net IDE. I have had success in adding a connection to the application, until I get the point of where I should set a BreakPoint in the stored procedure "Ten Most Expensive Products" which belongs to the Northwind database. When I open Sever Explorer -->Data Connections- ->WI0001.NorthWind.dbo-->Stored Procedures and Right-click the procedure, the context menu does not give me an edit item to select to open this SP in the editor. Nor can I double-click on the stored procedure to open it either.
I've added the linked server options with the appropriate login credentials (Be made using this security context) to access the remote server. The account used is db_owner on both the desired db and the master db.
When I query [serverinstance].database.dbo.customers I get the results I desire but when I try to execute a stored procedure on that database, exec [serverinstance].database.dbo.procCustomers, the following error occurs:
Msg 18483, Level 14, State 1, Line 1 Could not connect to server 'serverinstance' because 'logn' is not defined as a remote login at the server. Verify that you have specified the correct login name. .
This is my first attempt at a loop in a stored procedure, and it is not working, but the rest of the sp works fine. Could anyone please provide me with some feedback. I am not sure if I need to execute the loop first or all the sp at once ? Thanks so much.CREATE PROCEDURE Table_1TT_1T (@PartNo varchar(20), @Wkorder varchar(10), @Setup datetime, @Line smallint, @TT integer, @Tester smallint, @LT1 integer, @LT2 integer, @LT3 integer, @LT4 integer, @LT5 integer, @LT6 integer, @LT7 integer, @LT8 integer, @LT9 integer, @LT10 integer, @LT11 integer, @LT12 integer, @LT13 integer, @LT14 integer, @LT15 integer, @LT16 integer, @LT17 integer, @LT18 integer, @LT19 integer, @LT20 integer, @LT21 integer, @LT22 integer, @LT23 integer, @LT24 integer, @LT25 integer, @LT26 integer, @LT27 integer, @LT28 integer, @LT29 integer, @LT30 integer, @LT31 integer, @LT32 integer, @LT33 integer, @LT34 integer, @LT35 integer, @LT36 integer, @UnitFound integer OUT, @parameters_LamType varchar(50) OUT, @parameters_Shunt real OUT, @parameters_ShuType varchar(50) OUT, @parameters_Stack real OUT, @parameters_Steel varchar(50) OUT, @Partno11 varchar(20) OUT, @Wkorder11 varchar(10) OUT, @Partno12 varchar(20) OUT, @Wkorder12 varchar(10) OUT, @Partno24 varchar(20) OUT, @Wkorder24 varchar(10) OUT, @Partno29 varchar(20) OUT, @Wkorder29 varchar(10) OUT, @Partno34 varchar(20) OUT, @Wkorder34 varchar(10) OUT, --@DL1 integer OUT, --@DL2 integer OUT, --@DL3 integer OUT, --@DL4 integer OUT, --@DL5 integer OUT, --@DL6 integer OUT, --@DL7 integer OUT, --@DL8 integer OUT, --@DL9 integer OUT, --@DL10 integer OUT, @DL11 integer OUT, @DL12 integer OUT, --@DL13 integer OUT, --@DL14 integer OUT, --@DL15 integer OUT, --@DL16 integer OUT, --@DL17 integer OUT, --@DL18 integer OUT, --@DL19 integer OUT, --@DL20 integer OUT, --@DL21 integer OUT, --@DL22 integer OUT, --@DL23 integer OUT, @DL24 integer OUT, --@DL25 integer OUT, --@DL26 integer OUT, --@DL27 integer OUT, --@DL28 integer OUT, @DL29 integer OUT, --@DL30 integer OUT, --@DL31 integer OUT, --@DL32 integer OUT, --@DL33 integer OUT, @DL34 integer OUT) --@DL35 integer OUT, --@DL36 integer OUT)ASSET @Tester = 1WHILE @Tester < 36 BEGIN Set @Line = (Select Line from dbo.location where Tester = @Tester) IF @Line = 453 BEGIN If @Tester = 1 BEGIN SET @LT1 = 453 END If @Tester = 2 BEGIN SET @LT2 = 453 END If @Tester = 3 BEGIN SET @LT3 = 453 END If @Tester = 4 BEGIN SET @LT4 = 453 END If @Tester = 5 BEGIN SET @LT5 = 453 END If @Tester = 6 BEGIN SET @LT6 = 453 END If @Tester = 7 BEGIN SET @LT7 = 453 END If @Tester = 8 BEGIN SET @LT8 = 453 END If @Tester = 9 BEGIN SET @LT9 = 453 END If @Tester = 10 BEGIN SET @LT10 = 453 END If @Tester = 11 BEGIN SET @LT11 = 453 END If @Tester = 12 BEGIN SET @LT12 = 453 END If @Tester = 13 BEGIN SET @LT13 = 453 END If @Tester = 14 BEGIN SET @LT14 = 453 END If @Tester = 15 BEGIN SET @LT15 = 453 END If @Tester = 16 BEGIN SET @LT16 = 453 END If @Tester = 17 BEGIN SET @LT17 = 453 END If @Tester = 18 BEGIN SET @LT18 = 453 END If @Tester = 19 BEGIN SET @LT19 = 453 END If @Tester = 20 BEGIN SET @LT20 = 453 END If @Tester = 21 BEGIN SET @LT21 = 453 END If @Tester = 22 BEGIN SET @LT22 = 453 END If @Tester = 23 BEGIN SET @LT23 = 453 END If @Tester = 24 BEGIN SET @LT24 = 453 END If @Tester = 25 BEGIN SET @LT25 = 453 END If @Tester = 26 BEGIN SET @LT26 = 453 END If @Tester = 27 BEGIN SET @LT27 = 453 END If @Tester = 28 BEGIN SET @LT28 = 453 END If @Tester = 29 BEGIN SET @LT29 = 453 END If @Tester = 30 BEGIN SET @LT30 = 453 END If @Tester = 31 BEGIN SET @LT31 = 453 END If @Tester = 32 BEGIN SET @LT32 = 453 END If @Tester = 33 BEGIN SET @LT33 = 453 END If @Tester = 34 BEGIN SET @LT34 = 453 END If @Tester = 35 BEGIN SET @LT35 = 453 END END SET @Tester = @Tester + 1 ENDSELECT @parameters_LAMTYPE = LAMTYPE, @parameters_SHUNT = SHUNT, @parameters_SHUTYPE = SHUTYPE, @parameters_STACK = STACK, @parameters_STEEL = STEEL FROM DBO.PARAMETERS A INNER JOIN .DBO.XREF B ON A.PARTNO = B.XREF WHERE B.PARTNO = @PARTNO SET @UnitFound = @@rowcountIF @UnitFound = 0 BEGIN SELECT @parameters_LAMTYPE = LAMTYPE, @parameters_SHUNT = SHUNT, @parameters_SHUTYPE = SHUTYPE, @parameters_STACK = STACK, @parameters_STEEL = STEEL FROM DBO.PARAMETERS WHERE PARTNO = @PARTNO SET @UnitFound = @@rowcount END --IF @LT1 = @Line BEGIN SET @DL1 = 1 END --IF @LT2 = @Line BEGIN SET @DL2 = 1 END --IF @LT3 = @Line BEGIN SET @DL3 = 1 END --IF @LT4 = @Line BEGIN SET @DL4 = 1 END --IF @LT5 = @Line BEGIN SET @DL5 = 1 END --IF @LT6 = @Line BEGIN SET @DL6 = 1 END --IF @LT7 = @Line BEGIN SET @DL7 = 1 END --IF @LT8 = @Line BEGIN SET @DL8 = 1 END --IF @LT9 = @Line BEGIN SET @DL9 = 1 END --IF @LT10 = @Line BEGIN SET @DL10 = 1 END IF @LT11 = 453 BEGIN SET @Partno11 = @Partno SET @Wkorder11 = @Wkorder SET @DL11 = 1 END --IF @LT11 = @Line BEGIN SET @DL11 = 1 END IF @LT12 = 453 BEGIN SET @Partno12 = @Partno SET @Wkorder12 = @Wkorder SET @DL12 = 1 END --IF @LT13 = @Line BEGIN SET @DL13 = 1 END --IF @LT14 = @Line BEGIN SET @DL14 = 1 END --IF @LT15 = @Line BEGIN SET @DL15 = 1 END --IF @LT16 = @Line BEGIN SET @DL16 = 1 END --IF @LT17 = @Line BEGIN SET @DL17 = 1 END --IF @LT18 = @Line BEGIN SET @DL18 = 1 END --IF @LT19 = @Line BEGIN SET @DL19 = 1 END --IF @LT20 = @Line BEGIN SET @DL20 = 1 END --IF @LT21 = @Line BEGIN SET @DL21 = 1 END --IF @LT22 = @Line BEGIN SET @DL22 = 1 END --IF @LT23 = @Line BEGIN SET @DL23 = 1 END IF @LT24 = 453 BEGIN SET @Partno24 = @Partno SET @Wkorder24 = @Wkorder SET @DL24 = 1 END --IF @LT25 = @Line BEGIN SET @DL25 = 1 END --IF @LT26 = @Line BEGIN SET @DL26 = 1 END --IF @LT27 = @Line BEGIN SET @DL27 = 1 END --IF @LT28 = @Line BEGIN SET @DL28 = 1 END IF @LT29 = 453 BEGIN SET @Partno29 = @Partno SET @Wkorder29 = @Wkorder SET @DL29 = 1 END --IF @LT30 = @Line BEGIN SET @DL30 = 1 END --IF @LT31 = @Line BEGIN SET @DL31 = 1 END --IF @LT32 = @Line BEGIN SET @DL32 = 1 END --IF @LT33 = @Line BEGIN SET @DL33 = 1 END IF @LT34 = 453 BEGIN SET @Partno34 = @Partno SET @Wkorder34 = @Wkorder SET @DL34 = 1 END --IF @LT35 = @Line BEGIN SET @DL35 = 1 END --IF @LT36 = @Line BEGIN SET @DL36 = 1 ENDGO
