Remote SSIS Vs DomainUser: Access Is Denied (0x80070005)
Sep 5, 2006
What OS permissions do I need to give a domain user to effectively connect to a remote instance of Integration Services?
I keep getting the following message:
Cannot connect to SQLDEV01
Failed to retreive data for this request.
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (Microsoft.SqlServer.ManagedDTS)
I have already performed the Windows 2003 steps outlined in the "Eliminating the Access is Denied" error located at http://msdn2.microsoft.com/en-us/library/aa337083.aspx
I have no problem if the user is a local Administrator (go figure).
View 11 Replies
ADVERTISEMENT
Jul 18, 2007
Hi frnds,
I am having a SQL 2005 instance on win2003 server.
SQL Server 2005, Standard Edition with SP1
Windows Server 2003, Standard Edition with SP1
2 days back, all services went down and I was not able to see anything in logs,how they went down? I restarted all the SQL Services again thru services.msc but when I am trying to open 'SQL Server Configuration Manager'.... .I am getting this error...
Cannot connect to WMI provider.You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 servers with SQL Server Configuration Manager.
Access is denied. [0x80070005]
I googled and got some good links about this error...
1 - http://www.sql- server-performan ce.com/faq/ sqlviewfaq. aspx?faqid= 296
2 - http://forums. microsoft. com/MSDN/ ShowPost. aspx?PostID= 142375&SiteID= 1
3 - http://www.ocforums .com/showthread. php?t=482307
I followed but didn't get success...has someone faced this issue and resolved also plz guide me......
And one more thing......sql services are running on this machine 'A' but Start, Stop, Pause, Resume and Restart option are not highlighted on this instance. I connected one another instance 'B' on this machine and got same issue (options were not highlighted) but when I opened that perticular machine where that instance 'B' is installed, i was able to see all option runable so i registered that instance 'A' on 'B' machine and got here also I was not able to see these option highlighted only for 'A'...
Please help me....a lot of thanks to all of you...
Thanks & Regards,
Mohd Rizwan
View 1 Replies
View Related
Oct 18, 2006
Hi, my name is Beatriz and I'm another victim of the 0x80070005 from
Hell. I'm running WBEMTEST from a PC to connect to another one with WXP
SP2 and even:
1. The firewall is down.
2. Applied the commands:
netsh firewall set service RemoteAdmin enable
netsh firewall add portopening protocol=tcp port=135 name=DCOM_TCP135
3. Did the workaround suggested in:
http://support.microsoft.com/kb/909444
4. Ran the workaround in: http://support.microsoft.com/kb/884573
5. Added the account I use to access by Wbemtest with to the Default
Lauch Permissions with Full Control.
6. Checked up the registry
:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlLsaforceguest
were set to 0.
I keep not being able to connect, and receving 0x80070005, what I'm
missing?!?!?!?
View 3 Replies
View Related
Jan 22, 2008
Hi all,
I'm trying to let certain users execute an SSIS package through an SP in SQL.
I've set up a proxy account for xp_cmdshell that the other users will use to execute dtexec with, but i get this message:
Could not load package "File SystemCODA_Actuals" because of error 0x80070005.
Description: Access to the path 'C:Program FilesMicrosoft SQL Server90DTSPackagesCODA_Actuals.dtsx' is denied.
When i log onto the server with the proxy account, i can navigate to that folder and open the package.
When try to execute it from the command shell:
dtexec /DTS "File SystemCODA_Actuals" /Decrypt "password" /Reporting E /SET Package.Variables[User::JobId].Value;25'
i get the same message. How come? How do i fix this? I've read somewhere that i should grant read to the package store to that user , how do i do that? Can't find that option in the tools or manuals.
Thanks in advance,
Gert-Jan
View 2 Replies
View Related
Oct 17, 2005
I am trying to access a SQL 2005 database on a seperate machine, using a COM+ proxy which is installed on my machine. I keep getting this error:
View 5 Replies
View Related
Oct 24, 2006
We have 2 SQL2005 servers currently. 1 is a dev box, the other production. To grant remote access to SSIS, I added my developers to the local Distributed COM Users group and also gave them remote Access and remote Activation on the MsDtsServer component.
This worked just fine. Recently we applied SP1 and the follow-on hotfixes to all SQL components. I followed the install order prescribed in the Q article and applied all component fixes. My developers are now unable to access SSIS remotely unless I add them to the local administrator's group. I don't see anywhere that a log gets generated to help me track down what's going on. Nothing shows up in my Windows security log, despite enabling audit logging on: Accout Logon Events, Logon Event, Object Access, and Privilege Use.
Is this a know issue in SP1 or the hotfixes? I'm hesitant to apply the patches to my production box until I can resolve this issue.
Thanks
Steve
View 6 Replies
View Related
May 24, 2007
I'm new to SSIS and I'm having problems getting a remote connection to the SSIS service using Management Studio on my workstation. If I terminal Service onto the Server I have no problems connecting to SSIS, but if I try to connect remotely I get the "Access is denied" error message. I have completed the following steps:
To configure rights for remote users on Windows Server 2003 or Windows XP
1. If the user is not a member of the local Administrators group, add the user to the Distributed COM Users group. You can do this in the Computer Management MMC snap-in accessed from the Administrative Tools menu.
2. Open Control Panel, double-click Administrative Tools, and then double-click Component Services to start the Component Services MMC snap-in.
3. Expand the Component Services node in the left pane of the console. Expand the Computers node, expand My Computer, and then click the DCOM Config node.
4. Select the DCOM Config node, and then select MsDtsServer in the list of applications that can be configured.
5. Right-click on MsDtsServer and select Properties.
6. In the MsDtsServer Properties dialog box, select the Security tab.
7. Under Launch and Activation Permissions, select Customize, then click Edit to open the Launch Permission dialog box.
8. In the Launch Permission dialog box, add or delete users, and assign the appropriate permissions to the appropriate users and groups. The available permissions are Local Launch, Remote Launch, Local Activation, and Remote Activation. The Launch rights grant or deny permission to start and stop the service; the Activation rights grant or deny permission to connect to the service.
9. Click OK to close the dialog box. Close the MMC snap-in.
10. Restart the Integration Services service.
But I still get the Access is denied error from my workstation??
I have Power User rights on the server and I'm a sysadmin in the database instance. The SSIS packages I am trying to access are stored in the database. If I add myself to the local administrators group on the server I CAN get remote access, but this is not an acceptable solution in our production environment.
Thanks for any help
View 3 Replies
View Related
Jun 8, 2007
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
View 6 Replies
View Related
Mar 27, 2007
I created a maintenance plan to do the backup on my machine and created a job using CmdExec command: copy e:\*.bak \remoteackup but the copy job fail each time.
I know that command works fine when i run it from a batch file but does not seem to work from the job in sql server. I try to map the remote machine to a drive and used the drive in the copy statementcopy e:ackup*.bak q:ackup but it still does not work. Is there something I need to do inside sql server?
View 5 Replies
View Related
Feb 6, 2007
hey guys i am getting this error on my link server it is sqlsqever to sqlserver link
error 7416 access to remote server is denied because no loggin mappings exists
View 2 Replies
View Related
Jun 20, 2007
I am using XP_CMDSHELL to run 2 Windows commands (from a SQL 2005 SP2 server) that access files on a remote server (called webserver). The two commands are:
1. cscript.exe \webserverwwwrootEur_SaveProductImages.vbs
2. dir \webserverwwwroot
Up until very recently this worked fine. Now I am getting Access Is Denied errors:
For #1:
Microsoft (R) Windows Script Host Version 5.6
Copyright (C) Microsoft Corporation 1996-2001. All rights reserved.
CScript Error: Loading script "\webserverwwwrootEur_SaveProductImages.vbs" failed (Access is denied. ).
For #2:
Access is denied.
This happens if the above commands are run through a job, or directly with Query Analyzer as SA.
I understand that XP_CMDSHELL commands are run in the security context of the SQL Server startup account. The SQL Server startup account is called SQLServer and this account exists on both webserver and the database server. On both servers the username & password are identical and the user is in the local Administrators group. The two servers are in a workgroup.
Things I have tried (with no effect):
1. Restarted the servers
2. Deleted and recreated the SQLServer login on both servers
3. Changed the startup account for SQL Server through the SQL Server Configuration Manager to another account and back to SQLServer.
The most revealing tests are these:
1. If I log into the database server myself using the SQLServer account I can run the above commands in a Command Prompt with no problem
2. I installed SQL 2005 Express SP2 on webserver using the same startup account (SQLServer). If I run the same XP_CMDSHELL commands as above but accessing files on the database server, the commands work!
So, an XP_CMDSHELL command run under SQL Express using the local SQLServer account to access a remote server works, but an XP_CMDSHELL command run under SQL Server using a local SQLServer account (that is supposedly identical to the same named account on the other server) does not work !!?!?!?
It is almost as if XP_CMDSHELL commands run under SQL Server are NOT using the SQLServer startup account, but using some other weaker account. How can I tell if this is true?
How can I get this back working (as it was a week ago). The only thing I can think that happened on the servers to cause this is the installation of Windows Updates.
Thanks
View 7 Replies
View Related
Feb 17, 2006
I am finishing a port of a project that was done with RS2000/AS2000/DTS2000. The cube process is triggered remotely by a Korn Shell script from Services for Unix that runs a DTS package:
dtsrun.exe /S "$ANALYSIS_SERVICES_HOST" /U "$ANALYSIS_SERVICES_USER" /P "$ANALYSIS_SERVICES_PASSWORD" /N "$PACKAGE_NAME"
I have finished porting the AS and RS parts to their 2005 equivalents and now I am trying to get the cube processing converted. I have built a SSIS package that processes the cube and I have deployed it to the SQL Server in MSDB. When I am logged on to the SQL Server box directly, I can execute the package via the Management Studio and from the command line via:
dtexec /Ser "$ANALYSIS_SERVICES_HOST" /DT "$PACKAGE_PATH_NAME"
When I try to register the SQL Server in Integration Services from my client PC Management Studio it fails with "Access Denied". When I try to run the dtexec from my client PC it fails with "Access Denied".
I have walked through Kirk Haselden's instructions at:
http://sqljunkies.com/WebLog/knight_reign/archive/2006/01/05/17769.aspx
(adding myself to Distributed COM Users, noting the correct DCom Config settings for MsDtsServer and restarting the Integration Services service) and the problem is still not resolved. I have posted to the DTS group on Technet and now I am posting here. This can not be run scheduled by SQL Agent as it needs to be triggered by other load/postload activities. Are there any other fixes for this problem that I can try?
Thanks,
Keehan
By the way, being able to have all the parts of this project in one dev environment is great. The previous application was developed in 3 separate locations which was pretty clunky.
View 6 Replies
View Related
Jun 27, 2007
I am unable to run a stored procedure that accesses a linked Oracle database as a dataset for a deployed report in Reporting Services. I receive the following error:
An error has occurred during report processing.
Query execution failed for data set 'spName'.
Access to the remote server is denied because the current security context is not trusted.
A few facts ...
The report previews fine in Microsoft Visual Studio 2005 Version 8.0.50727.762 (SP.050727-7600) report designer with VS being installed on my local machine and a shared data source referencing Server1
The deployed report on Server2 produces the error
The stored procedure code is similar to the following:
SELECT x.FieldName as OracleField
,y.FieldName as SSfield
FROM OracleLinkedServer..DatabaseName.TableName x
LEFT JOIN Server1.dbo.TableName y
The deployed report runs fine when the stored procedure code is changed as follows. This indicates to me that the problem is truly an Oracle connection issue;
SELECT 'ABC' as OracleField
,y.FieldName as SSfield
FROM Server1.dbo.TableName y
The Oracle database is a linked database on both SQL Server1 and on SQL Server2 database engines. (I don't see where in Server2 Reporting Services I can specify additional server connections.)
I've tried to trick Mr. Reporting Services on Server2 by creating a @L_TempTable in my stored procedure, inserting the data into it, then selecting from a SQL Server1.dbo.TableName LEFT JOIN @l_TempTable, but Server2 still knows I'm trying to get out to Oracle and rewards me with the error.
I can effectively run the Server1 stored procedure script on Server2 through MSSMS -- it's just the deployed report that references the stored procedure that doesn't work
The data source properties of the deployed report are as follows:
Select -- A Custom Datasource
Connection Type: Microsoft SQL Server
Connectoin String: Data Source=Server1;Initial Catalog=DatabaseName
Select -- Credentials stored securly in the report server
Username: UserName
Password: Password
Check -- Use as Windows credentials when connecting the the data source
Check -- Impersonate the authenticated user ...
(Please do not get sidetracked on the 'A Customer Datasource' selection above. I'd rather be using a shared data source, but right now, this is just the way it is.)
Anyone's expertise would be greatly appreciated. We have a great data warehouse but sometimes you just have to go back to the Oracle ERP and slug it out. What do I need to do to get a deployed report to effectively read from a stored procedure that references an Oracle table?
To everyone, thanks for reading!
~ Delora
View 2 Replies
View Related
Aug 25, 2006
Hello,
In SQL 2005, from a stored procedure in a local database I am attempting to execute a remote stored procedure in another database on another server. I am getting the error referred to in the Subject when the local stored procedure tries to execute the remote stored procedure. A couple of comments:
The remote database is set up as a linked server in the local database. As part of the linked server definition I selected the 'be made using this security context', and provided a local user name and password.
The remote database is set to Trustworthy.
I have tried every combination of WITH Execute As on the remote stored procedure but nothing works.
I can query against the remote database successfully within Management Studio. I can even execute the remote stored procedure successfully from within M.S., but not from within my local stored procedure when it is run.
Thank you for your help on this - Amos.
View 17 Replies
View Related
Jun 27, 2007
I am unable to run a stored procedure that accesses a linked Oracle database as a dataset for a deployed report in Reporting Services. I receive the following error:
An error has occurred during report processing.
Query execution failed for data set 'spName'.
Access to the remote server is denied because the current security context is not trusted.
A few facts ...
The report previews fine in Microsoft Visual Studio 2005 Version 8.0.50727.762 (SP.050727-7600) report designer with VS being installed on my local machine and a shared data source referencing Server1
The deployed report on Server2 produces the error
The stored procedure code is similar to the following:
SELECT x.FieldName as OracleField
,y.FieldName as SSfield
FROM OracleLinkedServer..DatabaseName.TableName x
LEFT JOIN Server1.dbo.TableName y
The deployed report runs fine when the stored procedure code is changed as follows. This indicates to me that the problem is truly an Oracle connection issue;
SELECT 'ABC' as OracleField
,y.FieldName as SSfield
FROM Server1.dbo.TableName y
The Oracle database is a linked database on both SQL Server1 and on SQL Server2 database engines. (I don't see where in Server2 Reporting Services I can specify additional server connections.)
I've tried to trick Mr. Reporting Services on Server2 by creating a @L_TempTable in my stored procedure, inserting the data into it, then selecting from a SQL Server1.dbo.TableName LEFT JOIN @l_TempTable, but Server2 still knows I'm trying to get out to Oracle and rewards me with the error.
I can effectively run the Server1 stored procedure script on Server2 through MSSMS -- it's just the deployed report that references the stored procedure that doesn't work
The data source properties of the deployed report are as follows:
Select -- A Custom Datasource
Connection Type: Microsoft SQL Server
Connectoin String: Data Source=Server1;Initial Catalog=DatabaseName
Select -- Credentials stored securly in the report server
Username: UserName
Password: Password
Check -- Use as Windows credentials when connecting the the data source
Check -- Impersonate the authenticated user ...
(Please do not get sidetracked on the 'A Customer Datasource' selection above. I'd rather be using a shared data source, but right now, this is just the way it is.)
Anyone's expertise would be greatly appreciated. We have a great data warehouse but sometimes you just have to go back to the Oracle ERP and slug it out. What do I need to do to get a deployed report to effectively read from a stored procedure that references an Oracle table?
To everyone, thanks for reading!
~ Delora
View 1 Replies
View Related
Feb 10, 2014
We've got 3 SQL Servers all SQL Server 2012. We have a Master server and 2 production servers (let's call them A and B). The Master has linked servers defined for both A and B in an identical way.
A and B both have the same databases and each has a Stored Proc that gets called by the Master server.
An SQL Agent job executes the stored proc on both A and B.
It works fine against A but not B.
If we execute the stored proc in a query window under our windows account (domainowner) it works, if we use SetUser to pretend to be the SQL Server Agent account (let's call it domainagent) A works and B doesn't.
Executing against B returns the error "Access to the remote server is denied because the current security context is not trusted."
domainagent is a sysadmin on both Server A and B.
Trustworthy is set to ON in both the Master Server Database it's executing from and the remote databases on both A and B.
All 3 databases have the same owner (let's call it domainowner).
View 5 Replies
View Related
Oct 26, 2007
I am trying to use a linked server and it works as long as I do not specify the sp_addlinkedserver @provstr parameter. If I specify that parameter I always get a 7416 "Access to the remote server is denied because no login-mapping exists" error. I have tried adding the logins various ways but it's very specific to the @provstr parameter, and it doesn't even matter what I put in that parameter. As soon as I put something in there whether it is valid or invalid, I get the error.
Anyone else seen this? There is an amazing lack of any discussion about the error when I search for it.
If I do this it works fine,
EXEC sp_addlinkedserver @server= 'linkedname', @srvproduct='', @provider='SQLNCLI', @datasrc='servername', @catalog='mydatabase'
EXEC sp_addlinkedsrvlogin 'linkedname', 'true', 'AppUser'
But as soon as I add the @provstr parameter, then I get the error if I try to use linkedserver,
EXEC sp_addlinkedserver @server= 'linkedname', @srvproduct='', @provider='SQLNCLI', @datasrc='servername', @catalog='mydatabase', @provstr='Failover Partner=otherservername'
EXEC sp_addlinkedsrvlogin @rmtsrvname='linkedname', @useself='true', @locallogin='AppUser'
It doesn't even make any difference what I put in the @provstr parameter - the sp_addlinkedserver statement always executes without an error, but running a query that uses the linked server generates the error.
View 12 Replies
View Related
Aug 25, 2006
Remus (or anyone who can help) -
I am sorry for posting this question here. The only reason I am doing so is because Remus answered a question similar to this late last year, but I couldn't get access to the whole thread.
In SQL 2005, from a stored procedure in a local database I am attempting to execute a remote stored procedure in another database on another server. I am getting the error referred to in the Subject when the local stored procedure tries to execute the remote stored procedure. A couple of comments:
a.. The remote database is set up as a linked server in the local database. As part of the linked server definition I selected the 'be made using this security context', and provided a local user name and password.
b.. The remote database is set to Trustworthy.
c.. I have tried every combination of WITH Execute As on the remote stored procedure but nothing works.
d.. I can query against the remote database successfully within Management Studio. I can even execute the remote stored procedure successfully from within M.S., but not from within my local stored procedure when it is run.
Thank you for your help on this - Amos.
View 1 Replies
View Related
Sep 12, 2007
Hi,
I have a stored procedure servicing a queue (sql 2005).
The stored procedure updates some data in a different server and database.
If the queue contains messages and I execute manually the stored procedure, I don't have any problem at all.
However, if I set the queue to use the same stored procedure, it gives me the following error:
Error 15274: Access to the remote server is denied because the current security context is not trusted.
Any ideas?
Thanks,
Aron
View 4 Replies
View Related
Jun 1, 2006
Does anyone know how i can give a user(non admin) access to integration services?
I already did this:
The user needs to be added to Distributed COM Users group
· Run %windir%system32Comcomexp.msc to launch Component Services
· Expand Component ServicesComputersMy ComputerDCOM Config
· Right click on MsDtsServer node and choose properties
· In MsDtsServer Properties dialog go to Security Tab
In the Security page we are interested in €œLaunch and Activation Permissions€? section. Click Edit button to see €œLaunch Permissions€? dialog.
€œLaunch Permissions€? dialog allows you to configure SSIS server access per user/group. In the bottom of the dialog you can select:
Local / Remote Launch permissions if you allow to a user/group to start service locally or remotely.
Local / Remote Activation permissions if you allow to a user/group to connect to SSIS server locally or remotely.
· Restart SSIS Service .
I get the following error when i try to login to SSIS:
===================================
Cannot connect to Dawn.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
Any help is appreciated...
Thanks
View 4 Replies
View Related
Mar 1, 2006
Hi, i got a little problem with my SSIS, when i try to connect from another machine the server response (Access Denied), why?, i'm a member of MsDtsServer to Local and Remote Activation and Launch, then what can be a problem?....
Thx for your help
JB
Colombia
View 3 Replies
View Related
Feb 24, 2006
I am getting an error when trying to access SSIS packages stored in the MSDB section. File access works, but I get an Access Denied error with the MSDB access. I've tried through the SQL Server Management Studio on the server and on a remote workstation. I've logged on with multiple users; to no avail. Has anyone encountered and solved this problem yet? I've noticed several posts that appear to be similar, but there are no resolutions that work for me.
Any suggestions will be appreciated.
Thanks,
Stephan
View 3 Replies
View Related
Mar 22, 2006
Hi,
I sometimes come accross this error when I attempt to execute an isolated task in the control flow. What is funny is that I am still able to debug the package.
It eventually resolves after a while. What could it be?
Thanks
Philippe
TITLE: Microsoft Visual Studio
------------------------------
Access Denied. (Exception from HRESULT: 0x80030005(STG_E_ACCESSDENIED))
------------------------------
BUTTONS:
OK
------------------------------
View 7 Replies
View Related
Aug 24, 2006
I having a wierd problem.
Environment: SQL Server 2005 (64-bit)
If I create a job with an OS step with the text below
"c:Program Files (x86)Microsoft SQL Server90DTSBinn"dtexec /DTS "MSDBew Import" /SERVER HAYDN /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
I keep getting the following error:
Message
Executed as user: XYZAdministrator. The process could not be created for step 1 of job 0x2161C39C2C34C54AA850602A482E82DF (reason: Access is denied). The step failed.
HOWEVER...
If I take put the above text within in a batch file (foo.cmd); and chanage the step to execute "c:foo.cmd" it works fine.
What am I missing here? It's seems wierd that it works one way, and not the other.
Thanks in adavance
Brian
View 3 Replies
View Related
Jun 22, 2007
Hi.
I have problem executing several SSIS-packages in a chain.
To be more precise:
I have implemented a Biztalk 2006 application which via a local webservice executes an SSIS package. The package it self calls another SSIS package, which is located in the same folder as the calling package. The second package then calls a third package etc.
The problem arises, when the first package calls the second package. An Access Denied exception is received. Can any one explain me how to fix this?
The user connected to the application-pool that the weservice is running under, has execution-rights on all of the packages.
Thanks
View 1 Replies
View Related
Mar 6, 2008
I am developing a package to restore a database from backup file on a remote server. I am having problems accessing the remote backup file when it is addressed via the admin share, in this case N$. It runs okay if a specific share is created but for some unknown reason fails via the adminshare.
I am executing the package job with a proxy account that is a member of the local administrators group on the remote server.
It appears that access via a remote admin share isn't possible from within a SSIS package. Is this the case?
View 2 Replies
View Related
Sep 9, 2015
I have a package that need to copy a file from a remote server using path like  ipaddresssharedfolder..now, inside of Microsoft data tools, everything runs fine, because y access to those folders on the windows sessions and enter my credentials. however how to I set up the package to use my credentials on the remote server? Â
Without it, I got error Executed as user: NT ServiceSQLAgent$RETAIL_PRO.and this user does not exists on remote server. so got access denied. error.Â
View 4 Replies
View Related
Aug 12, 2015
I have to access the remote system folder files in local machine using SSIS.
View 2 Replies
View Related
Jun 10, 2015
I have recently upgraded to SQL2014 on Win2012. The Access front end program works fine.
But, previously created Excel reports with built in MS Queries now fail with the above error for users with MS 2013. The queries still work for users still using MS 2007.Â
I also cannot create any new queries and get the same error message. If I log on as myself on the domain to another PC with 2007 installed it works fine, so I don't think it is anything to do with AD groups or permissions.
View 6 Replies
View Related
Jan 14, 2007
When running the following statement in SQL 2005, I get the error message "Access is denied":
exec master.dbo.xp_cmdshell 'TYPE \SERVER-BSHAREFILE.TXT'
The following are true about the network:
The SQL Server is installed on SERVER-A.
SERVER-A and SERVER-B are Windows 2003 servers on the same Windows 2003 domain.
The SQL Server and SQL Server Agent services are running under the domain account SQLSERVICE.
SQLSERVICE is a member of the Domain Admins group.
The Domain Admins group is part of the local Administrators group on SERVER-B.
The SQLSERVICE account has also explicitly been given Full Control to the folder referenced by \SERVER-BSHARE
xp_cmdshell use has been enabled on the SQL Server.
If I run the following command in SQL:
exec master.dbo.xp_cmdshell 'whoami'the following is returned: DOMAINSQLSERVICE
If I change the command to access the c: drive instead of a network drive, it executes successfully.
Can anyone shed some light on why I still cannot access any of the files in this folder using xp_cmdshell?
Tim
View 5 Replies
View Related
Apr 22, 2015
When i am trying to start our hospital software based on SQL server 2000, it shows Following Error.Search Condition is not valid, (DBNETLIB) Connection Open (connect()).  SQL server does not exist or excess denied. Due to Fetch data.I run our software in Windows 8.1, while it smothly runs in previous version of Windows XP and 7.
View 2 Replies
View Related
Jun 2, 2015
- When I disable "allow remote connections to this server" from server properties>connection page, I can still remotely connect to the server from SSMS...so what is the impact of enable/disabling it?
- what is the impact of changing the remote query timeout (on the same page) from default value?
View 4 Replies
View Related
Jul 22, 2006
Hello everyone.Whenever I tried to access my database, I would get an error which stated "SQL server does not exists or access denied". My connection string would be as follows:private string connectionstring = "Data Source=local host;Database=pubs;User ID=sa;Password=sa";the password being set to sa. this connection string never worked and I always got the above error. However on changing the Data Source to the computer name the connection string worked and I gained access to my database. How's that? Can anyone please explain to me why should the computer name work for the data source and not the server name. As far as the syntax is concerned the data source should be the name of the server and not computer name. regardsHarsh R. Saxena
View 4 Replies
View Related
