Shouldn't the reomte configuration should be set up on ServerA & ServerB
if you wanted to compare the contents between two tables, and if so I thought
RPC should be done by stored Proc's and not by query alone.
So if I wanted to do this:
select * from Customer_table --(ServerA)
where not exists(select * from Customer_table --(ServerB).
Then it would need to be in a stored proc ?
- When I disable "allow remote connections to this server" from server properties>connection page, I can still remotely connect to the server from SSMS...so what is the impact of enable/disabling it?
- what is the impact of changing the remote query timeout (on the same page) from default value?
I am trying to add a linked server from a AMD x64 server (Windows 2003) with SQL Server 2005 64 bit to a Server running SQL 2000. These are not in the same domain.
I can create a linked server using the option "Be made using the login's current security context" but can not when trying to specify the security context, i.e. sa and the sa password. When I try I get the following message:
Msg 15185, Level 16, State 1, Procedure sp_addlinkedsrvlogin, Line 98
There is no remote user 'sa' mapped to local user '(null)' from the remote server 'DTS_FSERVER'.
I have several other x64 server that I have no problem creating a linked server and specifying sa and the sa password.
The problem with using "the login's current security context" option is that I get an error when trying to run any Jobs against the linked server. The job fails withe the following error:
Executed as user: NT AUTHORITYSYSTEM. Access to the remote server is denied because no login-mapping exists. [SQLSTATE 42000] (Error 7416). The step failed.
I'm sure the two errors are related. Any ideas what is going on?
Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
i did "Linked server" between To Servers , and it's Working.
---------------------------
For Example :
Server 1 =S1.
Server = S2.
i create table in S1 : name = TblS1
i create same table in S2 : name TblS2
and i create trigger(name tr_cpD) From S1 in TblS1 For send data To TblS2 in S2
/****************** trigger Code ***************
CREATE TRIGGER dbo.tr_cpD
ON dbo.TblS1
AFTER INSERT
AS
BEGIN
SET NOCOUNT ON;
insert into [S2].[dbname].[dbo].[TblS2] Select ID,Name from insertedEND
**************************************************
result is :
Msg 7399, Level 16, State 1, Procedure tr_cpD, Line 14
The OLE DB provider "SQLNCLI" for linked server "S2" reported an error. The provider did not give any information about the error.
Msg 7312, Level 16, State 1, Procedure tr_cpD, Line 14
Invalid use of schema or catalog for OLE DB provider "SQLNCLI" for linked server "S2". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema.
how i can execute this trigger
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
View 2 Replies View RelatedHi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 1 Replies View RelatedHiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies View RelatedWe have a database on a 2005 box, which we need to keep in sync with one on a 2014 box (until we can turn off the one on 2005). The 2005 database is still being updated with changes that must be applied to the 2014 database, given the nature of the data (medical documents) we need to ensure updates are applied to the 2014 database in very near real time (these changes are - for example - statuses, not the documents themselves).
Cunning plan #1, ulgy - not at all a fan of triggers - but use an after update trigger to run a sp on the remote box via a linked server in this format, with a SQL Server login for the linked server with permissions to EXEC the remote proc.
CREATE TRIGGER [dbo].[SourceUpdate] ON [dbo].[SourceTable]
AFTER UPDATE
AS
SET XACT_ABORT ON;
SET NOCOUNT ON;
IF UPDATE(ColumnName)
[Code] ....
However, while the sp can be run against the linked server as a standalone query OK, when running it in a trigger it's throwing
OLE DB provider "SQLNCLI" for linked server "WIBBLE" returned message "The transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Procedure TheAfterUpdateTrigger, Line 19
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "WIBBLE" was unable to begin a distributed transaction.
Whether it actually possible to call a proc on a remote box via a trigger and if so what additional hoops need to be jumped through (like I said, it'll run OK called via SSMS)?
I'm setting up a simple SSRS implementation for a non-profit organization, using two servers hosted at a data center. The first server has SQL Server Standard Edition and Reporting Services installed. I've designed and deployed a number of useful reports on this server.
I was hoping to isolate this first server by installing IIS and SSRS on the second server, have users browse from the Internet to that second server (over SSL, of course), and have all reports served up from databases (and, presumably, the report server database) on the first server.
During the installation of SSRS on the second server, however, I'm being prompted to specify the service account. According to the help text:
"Reporting Services. Service accounts are used to configure a report server database connection. Choose a domain user account if you want to connect to a report server database on a remote SQL Server instance. If you are using a local report server database, you can use a domain user account or Local System to run the service."
I believe I want to configure SSRS to connect to a report server database on a remote SQL Server instance; therefore, it appears that I need to enter a domain user account. The only problem is, neither server belongs to a domain; they are members of a simple two-server workgroup.
Does SSRS, configured to connect to a report server database on a remote SQL Server instance, require a domain? Does what I'm hoping to accomplish require a domain? Creating a two-server domain seems like overkill for this implementation, doesn't it?
I appreciate any comments and suggestions. Thanks!
Dear All,
I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
Can I connect to remote SQL 2005 server through SQL Server Management Studio Express? I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
View 3 Replies View RelatedHow do I stop a remote query that INSERTS into a local table from being automatically "upgraded" to a distributed transaction?
I am using Windows 2000 server and SQL Server 2000 SP3a on both machines.
I am executing the following statement in Query analyzer.
INSERT MyLocalServer (col1)
EXECUTE MyRemoteServer.Master.dbo.sp_executesql
@RemoteQuery,
@ParameterDefinition,
@Paramter = 'somevalue'
@RemoteQuery consists of a SELECT four-table join, all tables are on the same linked server.
The Linked server has been set up on MyLocalServer using the "Microsoft OLE DB for SQL Server" provider. In the "Provider Options" for the linked server properties I checked "Non transacted updates" and "dynamic parameters". In the "Server Options" tab I have checked "RPC", "RPC Out", "Data Access".
The EXECUTE part of the query runs great (and returns the data very fast) by itself. But with the INSERT part, the query fails and returns the error:
"Server: Msg 7391, Level 16, State 1, Line 17
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]."
The two servers are seperated by firewalls, so I believe the reason the query is failing is that I haven't followed the procedures for setting up the ports etc described in one of the microsoft support articles: e.g.: 250367.
Configuring the ports involves too much company politics, and besides, for what this query does, it does not need the benefits of a distributed transaction.
How can I execute my query without SQL Server automatically trying to upgrade it to a distributed transaction?
More Info: I can execute the query as a straight INSERT/SELECT linked-server query and it does the INSERT on the local SQL Server just like I want it to, so I assume it is not trying to use distributed transactions; but it takes around 7 seconds to run even though the entire SELECT is executed on the linked server, whereas executing with sp_executesql takes only 1 second.
I thought selected "non-transacted updates" in the provider would solve this problem, but it did not.
Anyone know the answer?
I'm new to SQL. I have a scenario, Where customer want to move all the jobs from original SQL server to some remote SQL server and want to trigger jobs on remote server to do its work on original server.
View 4 Replies View RelatedIs it possible to view the Connection String information of a remote login/session? I want to know if the login is looking-up the database server via IP address, servername (NetBIOS name) or fully-qualified domain name (FQDN).
Using these DMVs I can get a lot of relevant information:
sys.dm_exec_sessions
Program Name (eg. Microsoft SQL Server Management Studio),
Client Interface Name (eg. .Net SqlClient Data Provider)
sys.dm_exec_connections
Net Transport (eg. TCP),
Client Net Address and TCP Port
but not how the server's IP address was resolved. Is the connection string ever sent by the client to the server, or just used for DNS lookup?
Hi,
I am developing a windows application that needs to communicate with a remote SQL server 2005 database. Server allows remote connections and MSDTC service also running. Do I need to run MSDTC service on the client machine where I use desktop application ? any ideas ? It's throwing some error like
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
But my SQL Server allows remote connection, and I am able to do a select statement.
But when I insert/update anything, it's throwing this error. I guess some problem with MSDCT. Anybody have any idea ?
Hi!!
I'moving my asp application to a new hosting server.
So when i tried the setup locally with the live DB & application in my test machine...
The DB access is denied when application tries to hit the DB.
DB is in seperate machine with SQL Server 2000 & application(ASP) is in Windows server 2003.....
Kindly help me with your suggestions....on what went wrong?
Hi all,
I am having seriuos problems getting VoIP traffic into and out of my network via the ISA server which we just newly installed.
My network topology is such that the phones i am using for the VoIP service, sitting inside my network and behind the ISA server, have to register to some remote proxy server outside my network and as soon as it registers i can begin using the service. The VoIP service is on the platform of SIP and uses udp ports 5060 and 8080.
I have permitted the necessary ports on the ISA server for the service being UDP port 5060 and 8080 but still cannot get my VoIp traffic through the server.
Please i need some help here as regards something i am supposed to do or something i am not doing right on the ISA server to permit my traffic.
I am a newbie to this Microsoft ISA server and i hope you all understand
Thanks in anticipation to your replies.
Leonard.
When my default.aspx page loads I get this error for the connection to my SQL 2005 DB. An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check.
Hi,I've an account with a hosting service provider online for SQL Server database. I've downloaded SQL Server 2005 Express from ASP.Net. How can I use it to connect to my SQL Server Database which is sitting on remote server? The hosting provider gave me following things to connect to the remote database.Server NameDatabase NameUser NamePasswordRegards,A.K.R
View 2 Replies View RelatedI want to connect to company's SQL Server from home and to connect to home's SQL server from company remotely.
The new released SQL Server Web Data Administrator by Microsoft seems solving my issue.
I use it to connect to different SQL servers in different domains company wide successfully, but I failed to connect to home from company( I have static IP on the home server).
Also I want to know how to configure the sever name if I want to connect to company's SQL Server from home. The company SQL server is inside the firewall with a internal IP. How it works?
Any ideas?
Thanks!
hi,
could anyone guide me on how to allow, ceate rule for sql server 2005 remote connections to work. i already configured my sql server to allow remote connections and also my router, it is only in isa that is blocking the connections.
thanks
Running SQL Server Personal Ed (Server A) on Tablet PC (publication and distribution setup here) trying to push data to SQL Server 2000 Enterprise Ed. (Server B). When I start sync I get two failures. First is 'remote server not defined as subscription server'. Second, subscription to publication xx not valid (error# -2147201019). The snapshot is succeeding fine. What do I need to setup on Server B? I have the same db on both servers.
I set up the collector, and specify the Run As as my AD account in the Collector Set - Properties - General screen. My AD account is the local admin of the remote server.
However, the collector does not seem to work. Although the collecting set is shown as running, the The blg file stays at 64K. If I open it, there is nothing inside (no counter at the bottom). What did I miss?
Hi Listers
I am using sql7 on both servers
i would like to run a stored proc(which has a distributed query) as a job from my local server on a remote server.This proc checks for info on the local server zzdb and remote server xxdb for updated fields.
This info is then inserted into yydb.The stored proc is defined on the yydb.
I have set up the linked server and login.The services is using the local account.The master and target server will not serve my purposes as this job is defined on the local machine and needs to be run from the local machine.
this job fails? any help will be appreciated
TIA
I try to copy database from remote SQL Server(6.5) to our local
SQL Server(7.0). I try this way: First, in Enterprice Manager,
I try "NEW SQL SERVER REGISTRATION" using "Register SQL
Server wizard". The remote server give me the IP, login name
and password. then, I try connect option by "login using
SQL Server". But I got message say:"specialted server not found,
Connection open,create file". some times say:"client server access
denied..." some times say:"timeout". What's going on here?
So, I can not get going on with "Import data wizard".
Does anyone know how to solve this problem? Any answer would be of great assistance!
Thanks
Please Help Me to do this...
Consider i hv already logged in
sql server 2005
ip no : 192.168.2.20
db name: framework
from this query window is it possible to access the objects(tables,stored porc's)
of another server's database
for example ,
sql server 2005
ip no : 192.168.2.21
db name: framework1
...................................................
Im able to access the same server's db objects
consider im frame work db
declare @qry as nvarchar(max)
set @qry= '
use [master]
select * from [Sales]
'
exec (@qry)
... but when i use use statement like,(its not working)
use 192.168.2.21
use [master]
Please help me out .....
Hello,
I want to connect to the remote SQL server form my comupet using SQL server Enterprize manager. How cna i do that?
I realli appreciate your help.
Many Thanks.
Nitesha
Here is the information that I have... ( ps all information is not the actuall information )
1) URL abc.somehostingcompany.com IP: 211.11.111.1 PORT: 1433 ( NOTE: if I go to a cmd promt and type in ping abc.somehostingcompany.com I get a response )
2) dbname = mydatabase
3) userUid = sa pwd = sa
Inside SQL Server Configuration Manager --> SQL Server Network Configuration --> Protocols for SQLEXPRESS, I enabled TCP/IP and Shared Memory. Inside the properties of TCP / IP, I made sure under the "IP Address" tab that the
IP1: Active = yes
IP1: Enabled = yes
IP1: IP Address = abc.somehostingcompany.com
IP1: TCP Dynamic Ports = 0
IP1: TCP Port = < empty string >
I clicked "OK", and I stopped and started the SQL Server 2005 Services --> SQL Server (SQLEXPRESS). Then I started up SQL Server Brower.
Lastly I go to SQL Server Management Studio Express and try to connect to this remote server and database and I keep getting timeout issues and a message saying that the default settings for SQL Server Express do not allow remote connectioning by default.
Any ideas what I could be doing wrong? Should I use the port number instead of Dynamic Ports? Should I use the real IP address? Does the LOG ON AS under SQL Server (SQLEXPRESS) properties need to be updated?
Any help would be great.
Sean
Hi! Could anyone please tell me how to add a remote server (located on a different network) to my SQL server Group in Enterprise Manager. For doing this is a trusted connection required between the Win NT Servers in question? Would be very grateful for any help
Thanks,
Indira