I currently develop/maintain VB 05' apps for PDA's and desktops. I've got a scanner app that scans labels to build/transmit orders via an HTTP byte stream. I'm currently building an inventory app that resides at the remote client (windows not web) and can eventually connect to my SQL Server @ corp. At this point SQL 2005 endpoints work on the internal network but fail to resolve remotely. I've read about connecting to a SQL Server via HTTP with ip specs embedded in the connect string but havnt been able to find an example. Outside of creating a VPN for connectivity, can anyone recommend connection ideas for my scenario? Is it true that endpoints are only recommended for intranet consumption?
I have installed SQL Server 2005 Enterprise Edition on a W2K3 server that already has a SQL Server 2000 default instance installed. The installation appears to be a success. The problem is that having installed the client tools, and trying to connect, I get the following error message in a dialog:
"Cannot connect server SERVERNAMEINSTANCENAME An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)"
The funny thing is that I can connect to the SQL Server 2000 default instance that is on that server. So it's obviously not a connection problem per se at my end i.e. bad dns etc which might stop me resolving the server name.
Googling for this error text gives the following advice on various web sites:
1. Check that the remote server allows connections.
It does, as other colleagues in my team have successfully installed the tools and can connect with no problems.
2. Check that the SQL Browser service is running.
It is, as without this running, my colleagues would not be able to connect either.
3. Open SQL Server Configuration Manager. Select "SQL Server 2005 Network Configuration | Protocols for MSSQLSERVER" then enable the protocols you need.
The required protocol (TCP/IP) is enabled. Named pipes is also enabled, although I don't think that we're using that. And shared memory is also enabled by default.
4. Open the firewall and add exceptions for sqlbrowser.exe or UDP port 1434
There is no firewall running at either end of the connection and as mentioned I can connect to the SS2K default instance.
5. Make sure that the server machine is reachable.
I can connect to the SS2K default instance so it must be reachable. I can't see that I would need to change any configuration settings as my colleagues are using exactly the same default settings for their connections and they work fine.
The only thing that I have done differently is that I originally installed the client tools using someone else's privileged account as I didn't have admin rights on my box. The client tools didn't work, so I got admin rights to my box, uninstalled the client tools and then reinstalled them using my account. Still no luck. Not sure if something is still hanging around after the uninstallation that would cause me a problem.
To help, I've also filled out the following questionnaire:
[1] Client side: > What is the connection string in you app or DSN? There isn't one. I'm trying to connect from the SQL Server Management Studio | 'Connect to Server' dialog. > If client fails to connect, what is the client error messages? "Cannot connect server Y An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)" Is the client remote or local to the SQL server machine? Remote Can you ping your server? YES Can you telnet to your SQL Server? YES What is your client database provider? [SNAC | MDAC | ADO.NET1.0 | ADO.NET2.0| other (please specify] N/A What is your client application? SQL Management Studio Is your client computer in the same domain as the Server computer? Different domains What protocol the client enabled? [Shared Memory | TCPIP | Named Pipes]. All 3 protocols are enabled Do you have aliases configured that match the server name portion of your connection string? No Do you select force encryption on server and/or client? No
[2] Server side: What is the MS SQL version? SQL Server 2005 What is the SKU of MS SQL? Enterprise What is the SQL Server Protocol enabled? [Shared Memory | TCPIP | Named Pipes ]. All 3 Does the server start successfully? YES. Other people can connect to the same instance. If SQL Server is a named instance, is the SQL browser enabled? YES What is the account that the SQL Server is running under? Domain Account Do you make firewall exception for your SQL server TCP port if you want connect remotely through TCP provider? N/A. Firewall not running. Do you make firewall exception for SQL Browser UDP port 1434? N/A. Firewall not running. What tool or Application are you using to connect to SQL Server SQL Server Management Studio
[3] Platform: What is the OS version? Windows 2003 (Server side), Windows XP Pro Version 2002 SP 2 Do you have third party antivirus, anti-spareware software installed? Symantec AntiVirus
[4] Misc: If you have certificate configuration issue: N/A
Has anybody else come across this problem, as I've run out of ideas.
Can anyone tell me what are the necessary steps if I want to connect to a Remote SqlExpress Instance ? I am using Visual Studio 2005. When I tried to connect it says that the remote server does not allow remote connection. I have enabled all the protocols from Sql Server Configuration manager and disable the firewall. But it still not working. Pls Help me. Thank You.
Not sure if this is the right place for my question but here goes anyway.
I have an instance of SQL Server 2005 installed on my DEV PC. A colleague of mine wants to access my server from his machine which connected to the same network.
I logged on to SSMS and added him as a new login.
Will he be able to connect to it now or do I have to do more than just that?
I am attempting something that I have done many times before; however, in this instance it continues to fail.
I am trying to connect Management Studio to an instance of SQL Server 2005 Express over a VPN. The Management Studio connect dialog always fails with Error 26.
I have:
Enabled the instance for remote connections €“ both TCP/IP and Named Pipes
Ensured that the instance is enabled for TCP/IP on the VPN address (10.2.1.1) and on port 1433
Ensured that the instance is running
Ensured that SQL Browser is running
Ensured that ports 1433 (TCP) and 1434 (UDP) are open on the firewall for inbound traffic
Rebooted the server following this configuration to ensure that the instance services are refreshed
Tried to connect from three separate clients (albeit on the same remote network)
Disabled the firewall to ensure no further complications (as a last resort)
I have this exact same setup functioning on a separate server.
There is an additional backstory to this problem; however, I will not complicate the scenario with it now. If you feel you can help then I can elaborate further on the server€™s history.
I am getting this message. On the actual server I can pull up the report builder, but from a client on the network when trying to connect to the sql report builder I get this message:
PLATFORM VERSION INFO Windows : 5.1.2600.131072 (Win32NT) Common Language Runtime : 2.0.50727.42 System.Deployment.dll : 2.0.50727.42 (RTM.050727-4200) mscorwks.dll : 2.0.50727.42 (RTM.050727-4200) dfdll.dll : 2.0.50727.42 (RTM.050727-4200) dfshim.dll : 2.0.50727.42 (RTM.050727-4200)
ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Activation of http://webdev.ci.lubbock.tx.us/reportserver$sql05/reportbuilder/reportbuilder.application resulted in exception. Following failure messages were detected: + Downloading http://webdev.ci.lubbock.tx.us/reportserver$sql05/reportbuilder/reportbuilder.application did not succeed. + The remote server returned an error: (401) Unauthorized.
COMPONENT STORE TRANSACTION FAILURE SUMMARY No transaction error was detected.
WARNINGS There were no warnings during this operation.
OPERATION PROGRESS STATUS * [3/16/2006 10:10:28 AM] : Activation of http://webdev.ci.lubbock.tx.us/reportserver$sql05/reportbuilder/reportbuilder.application has started.
ERROR DETAILS Following errors were detected during this operation. * [3/16/2006 10:10:28 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype) - Downloading http://webdev.ci.lubbock.tx.us/reportserver$sql05/reportbuilder/reportbuilder.application did not succeed. - Source: System.Deployment - Stack trace: at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next) at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles() at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState) at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation) at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation) at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options) at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) --- Inner Exception --- System.Net.WebException - The remote server returned an error: (401) Unauthorized. - Source: System - Stack trace: at System.Net.HttpWebRequest.GetResponse() at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS No transaction information is available.
Remote connections is enabled and I am connecting as the servers admin. Any suggestions. I think it might be a user thing, but I am not sure. Do I need to add a user to the report builder folder in iss or what.
I want to know what are the configuration I need for the client side to connect to SQL Server Express 2005. Because i'm studying Network Application using SQL Server Express 2005.
Please help me guys, i really appriciated everything.
I have set up a SQL Server 2005 to use for testing before moving to another production server. The server works fine when I connect to it with a program on the same computer but not when accessed remotely.
I have set it to to allow remote connections and use TCP IP only and have opened TCP port 1433 on the Windows XP firewall and am using the Teredo service on Port UDP 3544 Also the Server Browser service is running. The server is connected directly to the internet on a static IP (eg. 67.156.18.167) I have set the server to Windows authentication.
When I try to connect to the database from a data grid in Visual Studio on another computer it fails.
I am pretty surethat the problem is that I am not giving the correct information when asked to fill in the information for the data source to find the server as I am new to remote connections in SQL Server.
I am quite new to sql server 2005. Now I am going to develop a new asp.net application connecting to sql server 2005 remotely. So what must I have install in order to connect to a remote sql server and also to enable me build the tables too? What are the softwares that I need to install before I can proceed on this ? If possible I wnat to avoiding installing the whole server into my local machine as I dont need it. Thanks.
I use ASP.NET 2.0 and VS.NET 2005. I have the following expression in my code: string connectionString = "server='localhost'; user id='sa'; password=''; Database='Northwind'"; When I executed the code I have the following error message: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)." The Microsoft Access was successfully connected in the Server Explorer window. How do I solve this problem? Thanks, Andy.
I'm using Visual Studio 2005 Pro and am attempting to connect to a remote SQL Server 2005. I have the server name, SQL login credentials, and database name. However, when I try connecting I get this error: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" I know that remote access is enabled because I received the connection instructions directly from the database administrator. I've tried turning off my firewall. I've tried connecting with Data source: Microsoft SQL Server using both Data providers: ".NET Framework Data Provider for SQL Server" and ".NET Framework Data Provider for OLE DB". Nothing seems to work. Any suggestions for what I may be doing wrong? Do I have to have certain software installed on my computer to make this work (other that VS2005)? -Mathminded
Hi. Im trying to get a asp.net web aplication to write data to an sql express server located on another server. However when i try to connect with VS 2008 it says: "Named pipes provider, error 40: - Could not open a connection to SQL server". What do i need to do to get this to work. Do i have to set something in the sql server, and i assume i have to open some ports in my firewall aswell? Any help sugestions would be aprichiated
I'm trying to connect to a sql server machine from another machine on the network and I'm getting this error: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" More information about the machines: All machines are on the same private netwrok, all in the same workgroup. Machine1: this is the DB server, Win 2003 server, it has SQL 2005 developer edition, .Net runtime 2.0. Machine2: trying to connect to machine 1, Win 2003 server, .Net runtime 2.0 On the DB server, TCP/IP is enabled with port 1433, also named pipes are enabled. I checked the ERRORLOG and it says it's ready for connections and it's listening...Also there are no firewalls between the machines, I also added the sql server service .exe and the sql explorere .exe to the windows firewall exceptions on the DB server (although it's disabled)... I'm not sure what else to do, I checked all sources online, applied anything related to this issue but not luck. This has wasted 3 hours of my time, this was a task that wouldn't take you a minute in older versions!! , Microsoft thinks it's making our life easier but in fact, I spend more time now on trouble shooting than before... Let me know if you have a solution.. thanks, Tamer
I have been reading every resource available out there about getting this connection to work. Can someone help me diagnose what the problem is? As the client, what ports do I need to have open? I'm using ReliableSite.net web hosting and trying to connect to their sql server.
I've also asked for help on their forum and opened a ticket to see if perhaps its listening on a different port, but they say its my issue.
For reference: http://forum.reliablesite.net/index.php?topic=232.0
I am having a problem connecting to SQL2005 through a package remotely. if the db is on the same system , the package is running fine. But when i try to connect to a remote db, i get the following error
Failed to acquire connection "[DBName]". Connection may not be configured correctly or you may not have the right permissions on this connection.
I have already allowed remote connections on the db server using the SQL server surface are configuration utility.
I am unable to connect to a remote server on Computer A from Computer B, but when I reverse it I am able to connect to a remote server on computer B from computer A. I have SQL Server 2005 Developer Edition on both computers. I am using the using the SQL Management Studio to connect. Both Computers have these settings
Using Surface Area Configuration both have local and remote connections checked. Both computers using tcp/ip only checked.
Using Configuration Manager both the sql server and the sql browser are running. Both computers have tcp/ip protocols enabled.
Under the server properties on both computers, under the Security Tab, I have SQL Server and Windows Authentication Mode checked. Under the Connections tab I have Allow remote connections on this server checked.
I believe I have the Security for both the server and databases done properly giving them both proper Logins and User Roles with the proper permission.
Also went to my window firewall settings and under the Exceptions tab, I added both the sql server.exe and sql browser.exe programs on both computers on my remote network.
But when I connect on Computer B, I get an error message stating:
TITLE: Connect to Server ------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
------------------------------ BUTTONS:
OK ----------------------------
I tried pinging server a and then server b and they both pinged.
Could someone please tell me what could be wrong on my remote computers.
ProblemWhen Remote Desktop to my main office machine, and when trying toconnect to SQL Express, I was becoming increasingly frustrated with thefollowing error:Error: 'Failed to generate a user instance of SQL Server due to afailure in starting the process for the user instance. The connectionwill be closed.'What is the solution?Solutions: ( pick any of the 3)1. Obtain and apply the patch http://support.microsoft.com/?id=8966132. Wait for the next Windows Service pack3.Of course if you can not get the patch, you can always do this (Note:You must have WinVnc server running in your remote computer)1. In the remote desktop session, reboot your computer.Click Start->Windows Security->Shutdown->Restart.Wait for some time to get machine up.2. Use your vncviewer to login to your remote computer. You can chooseto do all work via VNC or go to next step.3. Use remote desktop to login (this automatically closes the winvncsession).There you go, You did not create a remote session, but reused yourlocal session.
i have installed SQL client instance on my Desktop "Machine-A", and i used to connect to SQLServer2000 running on another "Machine-B" by using valid username and password.
i created a DTS package and i used to run it. im very confused how the communication happens between the two machines and which process run where and which initiates which and which machine allocates waht resources. im really interested to know all these things. if any one know plz help me out.
When my default.aspx page loads I get this error for the connection to my SQL 2005 DB. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check.
Can VB 2005 express able to connect remote SQL 2005 express database? I played with connection string many time and still could not success! Thanks all.
hi,I recently finished designing an ASP.NET website which connects to MS SQL Server 2005 on my local machine. I have now just uploaded my ASP.NET website to a remote server and the MS SQL Database to another remote server. Unfortunately when I try and access the database through the website I get an error - I believe this is due to the website still trying to connect the database to my local machine instead of the remote server. In my web.config I have the following ConnectionString code: <connectionStrings> <add name="EcoHouse" connectionString="Server=localhostSqlExpress;Database=EcoHouse;Integrated Security=True" providerName="System.Data.SqlClient" /> <remove name="LocalSqlServer" /> <add name="LocalSqlServer" connectionString="Server=localhostSqlExpress;Database=EcoHouse;Integrated Security=True" providerName="System.Data.SqlClient" /> </connectionStrings> I attempted to use Microsoft .NET Framework SDK 2.0 to configure the remote server. I entered the following however got an error: Setting environment to use Microsoft .NET Framework v2.0 SDK tools.For a list of SDK tools, see the 'StartTools.htm' file in the bin folder. C:Program FilesMicrosoft.NETSDKv2.0>aspnet_regsql -S *Server -U *Username - P *Password -A all -d *Database nameStart adding the following features: MembershipProfile RoleManagerPersonalization SqlWebEventProvider................. An error has occurred. Details of the exception:An error has occurred while establishing a connection to the server. When conne cting to SQL Server 2005, this failure may be caused by the fact that under thedefault settings SQL Server does not allow remote connections. (provider: SQL Ne twork Interfaces, error: 26 - Error Locating Server/Instance Specified) Unable to connect to SQL Server database.I'm unsure on the code I need to use in order to connect the website to a database on a remote server instead of a local machine. If anyone knows or has any suggestions on the steps I need to take to connect the website approriately it would be very much appreciated.ThanksDaniel
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1. Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration. Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"... The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
I am not sure if its possible, hopefully it is. I would like to create a custom page for one of my clients to log into and access information from their SQL server. If I have all the connection information, i.e user id and password etc. Can this be done. I know how to connect to an SQL server locally. If anyone can give me a point in the right direction, it would be greatly appreciative.
If this is possible, I am looking at adding a button on this page to allow the client to transfer records that meet specific criteria in a column in their database into a designated database on my server.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195 System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95 System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105 System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497 System.Web.UI.Control.InitRecursive(Control namingContainer) +321 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
I have two SQL SERVER Instances on the computer I am trying to connect to via VPN: 1) TEST 2. TEST/INST2
I can connect to the first with no problems.
When I am trying to connect to the second (with the Enterprise Manager/Query Analyzer and even with isql) - I get the following message: "SQL SERVER does not exists or access denied".
I use the SQL SERVER user and password to connect (as login sa).
I have had to format my laptop and re-install server 2005 developer edition. Im having trouble logging on. My computer name is 28NEWMANSLANE. I installed sql server with a default instance, where as last time i installed with a named instance.
I can not find out with name it has given itself.
am i correct saying that the logging in format would be
computername/instancename ?? using windows authentication
I am trying to connect to reporting services with the SQL client (SQL server management studio), I get an error message saying
The machine could not be found (Microsoft.SqlServer.Management.UI.RSClient)
This is a new install of reporting services, I can connect to the reporting services reports site without a problem. I am working with the DBA, he can connect through the SQL client and on the sql/rs server side i have system admin. But i still cannot connect.
If you add me on to the system admin of the OS i can connect but i dont need that permissions. Ive tried just about everything. Any suggestions?
I have configured reporting services to be connected from client with the help of http://msdn2.microsoft.com/en-us/library/ms365170.aspx KB article and I can connect locally in the server without any error. I've configured report service correctly since I can execute http://servername/reportserver or http://servername/reports . When I try to connect report service from my client Im getting the below error, can anyone help me to correct this.
Machine could not be found(Microsoft.sqlserver.management.UI.rsclient)
This is urgent since our developers are unable to connect from client
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
SQL Express 2014 was installed to support reporting for an application. I can connect to the server using the server name without any issue. When I run “select @@version”, I get SERVERNAMESQLEXPRESS, but I can’t connect to the server with SERVERNAMESQLEXPRESS. This is throwing off one of my script when trying to connect to the server.My script connects to the server using SERVERNAME for default instance or SERVERNAMEINSTANCENAME for named instance.
