I had made an application which is using SQL Expresss.
When I deploy that application on a server where only .Net Framework 2.0 is installed then it gives an error of remote connection.
Does that need some prerequisite for SqlExpress or the reason of error is something else.
I am trying to connect to remote sql server 2005, I am using the Full Name of SERVER (computername.domain) and on server , Local and Remote connections are checked under Surface area configuration settings.
i am getting this error:
....... under the default settings SQL Server deos not allow remote connections.
Should I choose TCP/IP and named pipes option????
Thanks,
Fahim.
for past few days this is making me mad. i have enables tcp/ip connections, have tried diffrent domain logins,enabled mixed mode but still when i try to connect remotely to SQL Server 2005 it give me which is as follows
general network error - check your network documentation
ConnectionOpen (PreLoginHandshake())
kindly help me
hello,
im trying to create an ODBC data source from a SQL SERVER 2005 database located in a remoted pc.
Client----------->PC1 : win 2000 sp4, not sql server
Remote server--->PC2 : win 2000 sp4, sql server 2005 express
From the Command Prompt, im typing "ping PC2" successfully.
After, in the ODBC datasource administrator-->System DNS tab, i choose "sql server" as a new data source , and in the server box , i'm typing PC2/SQLEXPRESS.
In the next steps, im typing the user-passwords.
The error :
connection failed
...
[microsoft][odbc sql server driver][named pipes]ConnectionOpen(CreateFile()).
Connection failed:
SQLState: '08001'
..
Client unable to establish connection
What goes wrong?
I follow the same steps locally, and everything is OK.
Sorry for my bad english:cool:
I am unable to connect to a SQL instance on the server from a workstation on the same network.
SQL Express SP1 is installed on the server, and allows mixed authentication. The instance name is <SERVERNAME>SQLEXPRESS.
Both the Database and Browser services are running.
Local and remote connections are enabled under SAC. I also used sp_configure to make the same changes.
All Protocols for SQLEXPRESS have been Enabled using the Configuration Manager.
The firewalls on both machines have been disabled.
Rebooting the server or restarting services after various changes hasn't affected the outcome.
Local connections made directly on the server are always successful using either authentication mode.
SQL Native Client Driver is installed on the workstation.
The workstation user is trusted. However, neither authentication mode is successful.
The connection string from the workstation uses the named instance above and the SQL Native Client driver.
Other services on the server are working and avaialble to the workstation, such as shared folders.
When I attempt a connection from the workstation I receive the following errors:
Connection failed:
SQLState: '08001'
SQL Server Error: -1
[Microsoft][SQL Native Client]SQL Networtk Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
Connection failed:
SQLState: 'HYT00'
SQL Server Error: 0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState: '08001'
SQL Server Error: -1
[Microsoft][SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default setting SQL Server does not allow remote connections.
I have tried all of the recommendations I can find here without any luck. What am I missing?
Hi,
I have an ASP.Net web application running in groupnamewebservername. I am trying to connect it to the remote database server groupnamedatabaseservername using the ASPNET user id. The remote database is SQL Server 2005 and the web server has IIS 6.0 installed. My web.config connection entry has username as "groupnamewebservernameaspnet" and I have a database user in remote database server under the login name groupnamewebservername$. When I try to connect, I keep getting the following error:
System.Data.SqlClient.SqlException: Login failed for user 'groupnamewebservernameaspnet'.
Could you please let me know what I am doing wrong here? Thanks.
Regards,
Gayathri.
I followed the steps outlined in a blog I found to setup SS2005 express for remote connections. Everything appeared to go smooth until I actually tried to logon ;)
I have Sql Server 2005 Express installed on my WinXP PRO machine at home (no domain). I have opened the ports on the firewall, etc.
When I try and login from the SQLCMD command line tool I get a Login Failed error. Here is the connection string that I'm trying to use:
SQLCMD -S **.***.**.*SQLEXPRESS -U Steve -P MyPassword
The error:
Login failed for user 'Steve'.
When I use Management Studio Express on the same machine running Sql Server, it shows the User name: NEVERSTILLSteve
'NEVERSTILL' is the name of my computer.
If I try and use that same username with a remote connection I get the same error.
I have googled for the error and msg code, but nothing fitting my situation is coming up.
Anyone have any ideas for me?
trying to connect to sql server 2005 over the internet. (its a third paty hosting company i'm using)
so i have to connect via tcp/ip using sql server authentication.
my laptop is running vista.
the version of sql server 2005 on my laptopis developer edition with service pack 2.
it worked fine from windows xp and the connection details are valid as it runa fine from .net on the hosting website.
i have added sql serer managemnt studio to the exceptions list in the firewall.
ihave made sure tcpip is enabled in the sql server connection management console.
i have also enabled it in the cliconfg tool
firewall on/off seems to make no difference.
its almost enough to make you turn to oracle and thats saying something considering how long i've been in the microsoft camp...
the error returned is:
Login failed for user 'SQL2005_152092_garethbowen'. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
------------------------------
Server Name: 'xxxx',1433
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
Hi
i connect to remote Integration Service. i configure server for remote connection( on component services and DCOM config , ... ) .and now i can connect to Integration Service remotely and correctly.
but when i expand Stored Package and then click to expand MSDB this error will hapen:
login failed for user ... .(microsoft sql native client )
please help me
thanks in advance
Sir i am trying to connect sql from my LAN to my networked computers but whenever i tried to register it through Enterprise manager i get following "SQL Server registration failed because of the conection failure displayed below.Do you wish to Register anyway? Login failed for user 'SW17/Guest'
where SW17/ is my another computer name...
i have checked tcp and named pipes
and confirm username for sql authentication too
please help me as i being late submit my project
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
Thanks,
John T
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies View RelatedFull message:
Connection handshake failed. An OS call failed: (8009030c) 0x8009030c(The logon attempt failed). State 66
Under these conditions, setting trustworthy on on the sending and receiving databases will solve this issue
1) Communicating between multiple instances
2) Using Kerberos security (NT Authentication, i.e. not certificates)
I am running the Sept CTP. I have created a SSIS package that pulls data from a text file and inserts into a database. When I run the package on the DB server it runs fine. I have moved the package the the web server (we are attempting to kick off the package from a web site) and we get connections errors. We are running the package using dtexec from the command line.
View 7 Replies View Related
When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Any ideas???
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
I'm getting "Access denied" error when I try to connect to SSIS from my desktop (Database Engine is fine). I'm a member of sysadmin within SQL, as well as an administrator on the server. I don't have any problem when I log on to the server directly via Remote Desktop and open SSIS.
I went into the surface area config tool, and I see that Database Engine and Analysis Services both expand and have a sub tabs to enable Services and Remote Connections, but Integration Services does not expand to a Remote Connections option, just Services. We're running MSDN Enterprise edition.
Does it matter if all the SQL services are using "Local System" for the logon ? I use an administrative logon on my SQL2000 boxes, and was fiddling with them on the 2005 box yesterday, but it seemed to cause more problems, so they are all Local System for now.
Am I missing something obvious ?
I created a single step plan that does integrity checks. It fails with the error below. I created a new connection using our clusters virtual sql name.
Executed as user: ACCTCOMsqlagent. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:10:06 PM Error: 2008-02-15 13:10:49.02 Code: 0xC00291EC Source: {0CF32F3D-A8D1-492A-9C0F-AD4E0FC67D14} Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-02-15 13:10:49.02 Code: 0x80019002 Source: OnPreExecute Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning Error: 2008-02-15 13:11:31.26 Code: 0xC0024104 Source: Check Database Integrity Ta... The package execution fa... The step failed.
The agent and db are running under domain accounts and the job is owned by sa.
Thanks for your help.
Hi,
i am getting this exception i.e."
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection timed out: connect" whenever i try to connect to the remote DB which is present at a different system.
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
I am working in a distributed environment, I verified msgs have been successfully send from server1 db1 to server2 db2, but I still get the following error msg from the sender server through SQL profile:
Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'.
Does anyone experienced the samething?
Thanks!
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SElevalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme
hi all,
i got the error, when i run my package after deploy into the server machine;
i can able to run that package in my local machine, if i deploy it to the server or some remote machine, its not running, and rises error messages, that says cant accquire connection from the connection manager;
the problem might be with the login name and password; i could not see any password in any of my config file, or connection manager while running the package.
how to resolve this problem?? please help me!
Hi. I'm (very) new to SQL Server. I have run into what seems to be a very common problem, judging by the number of Google hits, but it's not actually in the FAQs here, as far as I can see.
Situation
I installed SQL Server Express with Advanced Services 2005 on my Windows XP Pro laptop, using (with one exception) the default install. The exception was to put the data files on a separate partition (D: ) where I have more free space.
SQL Server Management Studio Express connects happily, and I set up a single data import table.
Issue: bcp Fails to connect to default local instance
I initially tried bcp in output mode, prior to working in earnest on importing my data. However the command line-
bcp MyDatabaseName.dbo.UserProfile out UserProfile.txt -T -c
Fails with the error-
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
As I understand it, the local instance of SSE is the default, and should use a local (shared memory?) connection. This seems to work for Management Studion Express, but not bcp.
While investigating this problem, I tried enabling remote connections (all types) through the Surface Area Configuration wizard, and found that remote connections using either of:
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S localhostsqlexpress
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S mycomputernamesqlexpress
both work ok.
Extra Info
When starting Management Studio Express, it says something like "Configuring environment for the first time". However it says this every time it is started, not just the first run after installation, does this indicate some configuration data is not being successfully stored?
I have found threads that look similar to my issue-
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=836670&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3351349&SiteID=1
However these do not relate directly to bcp, and to be honest my knowledge of SSE is slender enough at this stage that i'm unsure if there are really relevant.
Any hints on how to proceed much appreciated.
Regards: Colin E.
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?
I moved my web and DB to a new server. I am trying to use a private network between my servers to connect to my DB.
I backed up my DB on the old server, copied it to my new server, then restored it.
I then went into Security > Login and set up a User Name & Password and set the db as the default db, made that user the owner, etc.
I went to my web server, changed my connection string to this:
Code:
sConString = "Driver={SQL Server};" & _
"Server=tcp:MYSERVERNAME;" & _
<!-- The server name -->
"Address=xxx.xxx.xxx.xxx,1433;" & _
<!-- The Private IP Address between servers -->
"Network=DBMSSOCN;" & _
<!-- Telling it to use TCP -->
"Database=DBNAME;" & _
<!-- The name of the DB I am connecting to -->
"Uid=UNAME;" & _
<!-- The user name to login with -->
"Pwd=UPWD;"
<!-- The Users Password -->
(Obviously I changed the critical info above, but this is the format I used)
I cannot seem to login to the DB. I get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e4d'
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'UNAME'.
/(file path), line 5
I have read the following article and it appears I have everything right.
http://support.microsoft.com/?scid=kb;en-us;827422&spid=2852&sid=332
Somehow I cannot seem to connect/login to get the proper access. Can anyone help? Anyone see anything I am doing wrong? Anyone have any suggestions?
Thanks for the help in advance. I am trying to get this done tonight so it is running in time for the morning.
We have a SQL 2000 Active/Passive cluster running on Windows 2000. On one node, everything logs in fine (second node is powered off). I can use local authentication fine in OSQL (-E) and even see my connection in SQLEM current activity as [DomainUser] for the NT account which I am logged in as. Then I bring the second node online and initiate a failover. SQL Server starts but Cluster Admin cannot connect and starts throwing this Anonymous Logon error. I open a command prompt and try the same OSQL (-E) local login and sure enough it is also giving the Anonymous Logon connection user. I do not understand why the failover to a second node is causing the Trusted Connection Local authentication to switch to Anonymous instead of the [DomainUser] which I am using. Any help is appreciated. John.
View 1 Replies View RelatedHi,all.
I tried to issue:
sp_attach_db pubs,'F:anthonypubs.mdf','F:anthonypubs.ldf'
where the pubs.mdf and pubs.ldf are on a remote mapped drive F:,
I got error:
Server: Msg 5105, Level 16, State 4, Line 1
Device activation error. The physical file name 'f:anthonypubs.ldf' may
be incorrect.
Is attaching a database ONLY supported for local servers ??
What about creating database on remote drive? (I have same error msg back)
Thx
Anthony
Hi, all!
I am writing the VDI application to allow backup/restore MS SQL Server 2005. I would want to backup/restore remote servers as well as local. I have local instance of MS SQL 2005 and remote. Local instance has MSSQL2005_ZORG instance name, remote uses default (so it supposed to be MSSQLSERVER).
While connection to those server via SQL Server Management studio i see local server as "ZORGMSSQL2005_ZORG" and remote as "VM2000SRVZ2".
When i try to create VIrtualDeviceSet via CreateEx i pass "MSSQL2005_ZORG" as lpInstanceName parameter and all works fine. But I could't create same device set for remote 'MSSQLSERVER' instance. I passed any combination for that, such as "VM2000SRVZ2MSSQLSERVER", "MSSQLSERVER", "VM2000SRVZ2", "\VM2000SRVZ2MSSQLSERVER" and so on. No luck always get VD_E_INSTANCE_NAME (0x80770007).
Any idea?
--Thanks
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
Hi,
i created a SSIS package to import data to a remote sql server, using the following connection string:
"Data Source=My-SQL;User ID=PortalUser;Password=Password;Initial Catalog=TestOMIWarehouse;Provider=SQLNCLI.1;Auto Translate=True;";
and got an error "Login failed".
When i give PortalUser a sysadmin server role, it works. But i don't want to give PortalUser a sysadmin role. Any suggestions? Is sysadmin role required to access a remote server using Sql server authentication?
thanks! Any help would be appreciated.
alea
AlwaysOn open service 'remote registry failed' while validate the cluster.
View 4 Replies View Related