When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
hello there! i have a problem importing data from a remote connection using Sybase ASE ODBC driver(the sybase odbc driver is the only way we can access the database from the remote connection, we've already tried this in crystal reports). in the sql server import export wizard i chose the .net framework data provider for odbc. then below the wizard requires the following info: the connection string, DSN and driver. i specified the correct driver and dsn. in the connection string i specified the user id and the server name but it still produces error. the error says:
the operation could not be completed.
additional information:
ERROR[01000][SYBASE][ODBC Sybase driver][Sybase]ct_connect(): user api layer: internal Client Library error: HAFAILOVER: Trying to connect to server.
ERROR[01000][SYBASE][ODBC Sybase driver][Sybase]ct_connect(): user api layer: internal Client Library error: HAFAILOVER: Trying to connect to server.
i need your help guys... thnx
Hey guys,
Hope one of you can help me. I've got SQL Server 2005 Express installed on a laptop. I'm trying to create an ODBC connection to it so that I can access the database from a program locally that will be writing to it. I can connect to the SQL instance by listing the server name as DSR-XXXXXXX(ComputerName)SQLEXPRESS
However... when I access that ODBC connection, it doesn't see the database DBProScout (which was created inside SQL Express on this laptop locally), and I cannot access the tables within it. The only tables that I can access are system tables associated with SQL Server Express.
What could I be doing wrong?
Thanks!
Todd
I am working in a distributed environment, I verified msgs have been successfully send from server1 db1 to server2 db2, but I still get the following error msg from the sender server through SQL profile:
Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'.
Does anyone experienced the samething?
Thanks!
hello,
im trying to create an ODBC data source from a SQL SERVER 2005 database located in a remoted pc.
Client----------->PC1 : win 2000 sp4, not sql server
Remote server--->PC2 : win 2000 sp4, sql server 2005 express
From the Command Prompt, im typing "ping PC2" successfully.
After, in the ODBC datasource administrator-->System DNS tab, i choose "sql server" as a new data source , and in the server box , i'm typing PC2/SQLEXPRESS.
In the next steps, im typing the user-passwords.
The error :
connection failed
...
[microsoft][odbc sql server driver][named pipes]ConnectionOpen(CreateFile()).
Connection failed:
SQLState: '08001'
..
Client unable to establish connection
What goes wrong?
I follow the same steps locally, and everything is OK.
Sorry for my bad english:cool:
I have a Microsoft Access application which uses linked SQL Server tables. I would like to create an ODBC DSN which would be available to all users so that I don't have to create a DSN on each machine. Can this be done? The Access application resides on a shared drive (Windows). Thanks for your help.
In my project, I have added a database called aspnetdb.mdf and I store all the required information here. Now I want to write a seperate Cryatl Report for my manager, that accesses this database and display required data. This report is not a part of the asp.net project. This is only for my manager. My database is not attached to any server. I just use the attachdb in the coonection string of my project to attach this database. no I want my crystal report to access this database. If I can create an ODBC connection to this database, it will solve my problem. Dows any body know how to access this database from Crystal with or without ODBC?
Any help is greatly appreciated.
HiI think i have a very unique issue ....Running 2 machinesWin2000 / WinXPBoth have Sql / Service packsIdentical ODBC SetupThe issue is as follows :Both machines CAN access The internet server through ODBC ! (so i dontthink the problem lies here)I CAN connect to a server on the internet through a local web page onW2k Box; BUT NOT on the WINXP machine ?I think there is a IIS Prob maybe .. Checked iUser Security settings onboth and are identicalAny 1 have a suggestion ?Thanks in advance
View 1 Replies View RelatedI have a new server SQL 2005 im setting up a linked server to my 2000 box, however the connection is being refused: Error 10061.
The strange part of it is.
I have other SQL 2000 machines that can connect to this box over the linked server, and I have one linked server from 2005 to a different 2000 box working.
From remote desktop on my new 2005 box I can ping and connect via object explorer to the machine in question. One difference that exists between the 2000 server I can link to and the one that I can not is the port.
The box I can not connect to is on 2433 with the hide server option turned on.
Yes I have tried both the IP and Named pipe with port information when connecting.
Your assistance is appreciated.
Thank you.
You can do anything at www.zombo.com
Hi!!!
I got a problem, if i try to connect with SQL Native client by IP (exemple: 192.168.1.2MYDATABASE) it doesn't work. But I use: HOMEMYDATABASE it works. But in the 2nd case i cannot connect to SQL Server from another computer.
Thanks fr your help.
fred
I have a software to connect the SQL Server as DB, and it is ok to connect to the SQL Server 2000 on the remote server in our firm, but got errors when doing the connection to the SQL Server 2005. the error messages are:
Error #1:
ADO Error #-2147467259
Description SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
Source Microsoft SQL Native Client
Error #2:
ADO Error ##-2147467259
Description An error has occurred while establishing a connection to the server. When connection to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Source Microsoft SQL Native Client
Error #3:
ADO Error ##-2147467259
Description Login timeout expired
Source Microsoft SQL Native Client
I'm using SQL Server 2005 version 9.00.1399.00, not the Express version. Should I update the SQL Server 2005 Network Configuration in SQL Server Configuation Manager? But I don't know what should be set to "Enable" or Disabled". Is any other place need be configured?
Thanks.
This has probably been answered before, but...
I have a local SQL Server 2005 instance running, and I would like to have another user on my network connect to this instance. However, when he tries to connect, he always receives the same error message:
"An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error 28: - Server doesnt' support requested protocol)"
So, I checked the properties for the server, and under the connections tab the allow remote connection box is checked.
Any clue where to look next?
Hi everybody
I have installed SqlServer 2005 on my server but my Windows application on the client computers should connect to server via ODBC connection
so what should i install on the client computers (that don't have any sql server installed) to enable them to connect?
When i want to create ODBC connection on client computers through (Control panelAdministrative ToolsData Sources) i don't see SQL-Server 2005 ODBC driver in the list ....could anyone help me?
Kind Regards.
We have a legacy C++ application which uses ODBC to connect to SQL server. The application is a server process that opens a connection and caches it. Unfortunately on a connection drop, it does not refresh the connection. The standard installation is a 3 machine web/app/sql setup.
It has been working fine since last 4-5 years unless the SQL Server goes down. In that case, I keep seeing "Function sequence error" and "Communication link failure" errors. On one particular client installation on application server, I started getting this exception while SQL Server was up and running (on a different machine). I would see the connections randomly dropping in the activity monitor after 3-4 hrs of inactivity.
I wrote a .NET test app which uses ODBC drivers for SQL Server and makes a connection and then just waits. Out of 5 connections established by this application I saw one connection being dropped as well. Another test app used ADO.NET and it did not drop any connections. I asked the IT to check the network and they say its fine.
The servers are W2k3 SP2 and database is SQL Server 2005. IsAutoClose on all the databases is false. Nothing goes in the logs even after turning on traces using DBCC.
Since the connection drop was very random, I turned off connection pooling on "ODBC driver for SQL Server" on the application server and now it is working fine.
Can someone explain me what could be the reason? Also, is there a way to upgrade or downgrade ODBC drivers on W2K3 machines?
Thanks,
Pranav
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?
Hey all.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I'm having a big problem with a SQL 2K5 cluster (using standard edition). I can get onto the box and connect to the sql server locally fine. However when I try to connect remotely I get errors.
Let's call the two sides of the cluster, CL1 and CL2 and the "virtual server" is CL3. Locally I can connect without any problem at all to the SQL server, but I just can't connect to it from any remote machine.
The server in question is instance name LMS_PRD running on CL3, port 10051. TCP/IP is definitely enabled for local and remote connections (I have checked this in the SQL server surface area configuration). I can connect locally without any problem. Also, locally, if I do,
telnet CL3 10051
it connects fine
From a SQL 2000 box - when I try to connect from sql query analyzer, I get
"Unable to connect to server LMS_PRD Server Msg 17 ... SQL server does not exist or access denied"
Client network utility shows server alias - LMS_PRD, TCP/IP, CL3LMS_PRD,10051
[I can connect to other SQL 2005 servers OK from this same server using this same method]
On this box, when I do telnet CL3 10051 , I get "Connecting to CL3...Could not open a connection to host on port 10051 : Connect failed"
[When I do a similar one for another SQL 2005 box, "telnet U01 10051", it connects fine]
From another SQL 2005 box - when I try to register the server, I get
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP provider, error 0 - No connection could be made because thew target machine actively refused it.) (Microsoft SQL Server, Error: 10061)"
IN the SQL native client configuration it shows alias name - CL3LMS_PRD, server=CL3LMS_PRD, protocol tcp, parameters 10051
Again if I do telnet CL3 10051, I get the error above.
From this same box I can register another SQL 2005 server without any problem and do the telnet to it OK
Just to emphasise:
(a) The SQL server configuration manager shows that TCP/IP is enabled, and that 10051 is the port (in IPALL, TCP port). Also I have checked the SQL server errorlog - it is definitely using 10051 as the port.
(b) The SQL server surface area configuration shows under local and remote connections using both TCP/IP and named pipes selected (I've tried both this and the using tcp/ip only option)
(c) SQL server browser is running
(d) There are NO firewalls etc involved
Any help or advice MUCH appreciated
Any thoughts anyone?
Hi, I have a SQL Server machine, which has SQL Server 2005 installed in it. I'm able to connect to this server remotely (Remote Desktop Connection)
But when I'm trying to connect this SQL Server using SSMS. I'm getting the following error.
TITLE: Connect to Server
------------------------------
Cannot connect to 10.192.24.253.
------------------------------
ADDITIONAL INFORMATION:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
-Senthil
I'm having a big problem with a SQL 2K5 cluster (using standard edition). I can get onto the box and connect to the sql server locally fine. However when I try to connect remotely I get errors.
Let's call the two sides of the cluster, CL1 and CL2 and the "virtual server" is CL3. Locally I can connect without any problem at all to the SQL server, but I just can't connect to it from any remote machine.
The server in question is instance name LMS_PRD running on CL3, port 10051. TCP/IP is definitely enabled for local and remote connections (I have checked this in the SQL server surface area configuration). I can connect locally without any problem. Also, locally, if I do,
telnet CL3 10051
it connects fine
From a SQL 2000 box - when I try to connect from sql query analyzer, I get
"Unable to connect to server LMS_PRD Server Msg 17 ... SQL server does not exist or access denied"
Client network utility shows server alias - LMS_PRD, TCP/IP, CL3LMS_PRD,10051
[I can connect to other SQL 2005 servers OK from this same server using this same method]
On this box, when I do telnet CL3 10051 , I get "Connecting to CL3...Could not open a connection to host on port 10051 : Connect failed"
[When I do a similar one for another SQL 2005 box, "telnet U01 10051", it connects fine]
From another SQL 2005 box - when I try to register the server, I get
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP provider, error 0 - No connection could be made because thew target machine actively refused it.) (Microsoft SQL Server, Error: 10061)"
IN the SQL native client configuration it shows alias name - CL3LMS_PRD, server=CL3LMS_PRD, protocol tcp, parameters 10051
Again if I do telnet CL3 10051, I get the error above.
From this same box I can register another SQL 2005 server without any problem and do the telnet to it OK
Just to emphasise:
(a) The SQL server configuration manager shows that TCP/IP is enabled, and that 10051 is the port (in IPALL, TCP port). Also I have checked the SQL server errorlog - it is definitely using 10051 as the port.
(b) The SQL server surface area configuration shows under local and remote connections using both TCP/IP and named pipes selected (I've tried both this and using the tcp/ip only option)
(c) SQL server browser is running
(d) There are NO firewalls etc involved
Any help or advice MUCH appreciated
I am trying to set up a ODBC connection to a remote database using the ODBC data source administrator. I am getting an error message complaining of an invalid instance(). The database I am trying to connect to does have a default instance and a named instance. Do I need to specify the instance name somewhere in the connection settings? I tried specifying the server name as <Remote computer IP Address>/<Instance Name> but this didn't work. Any ideas?
View 4 Replies View RelatedHello,
I am not sure if this is the right forum.
This is the first time that I have seen this error,
No connection could be made because the target machine actively refused it
I have a web app that when some one inserts text in a text box and clicks a button it creates a new web page and a new table in the database. Up until this point it has always worked. A datalist returns the data. In the datalist there is a hyperlink that when clicked takes the client to the new webpage. But for some reason it is not working now and that is the error above.
I am lost. Any help appreciated.
Thanks Matt
Help! My web-application worked fine last week. I have made some enhancements and it still works fine when I test in locally in VS 2005 and from IIS when I allow unauthenticated users (by commenting out "<deny users="?"/>" in my web.config. However, with not allowing unauthenticated users, I get redirected to a login application (which also worked last week), where I supply one of several user names and passwords and it is supposed to redirect me back to my default.aspx page. Only, now it is taking the authentication parameters from the login screen but is not redirecting me back to my app's page and instead is putting up this Error 26 that states SQL Server 2005 does not allow remote connections.
The included stack trace has no information about what server it seems to be trying to connect with, but the strangest thing about it is I/we are not using SQL Server 2005 yet (still a future upgrade not too far off). The application database, the authentication aspnetdb database, and the Session aspstate database are all on the same SQL Server 2000 managed server. And, these were all working last week (and are all accessible). I have not changed any connection strings and as I said, it works fine without the loging in part both locally and from IIS. It is only when using the Login in application, which is working with other apps and the developer insists the problem has to in my application (after all the first line of the error message states: Server Error in '/deployment1' Application, which is my app!)
I am lost in finding the culprit, can someone please give me some ideas?
Hi,
I installed SQL server 2005 express edition on my windows server and I had no problem with connecting it remotely through Management Studio, then I removed it and installed a full edition SQL server 2005. That's when it's gone all wrong.
Now I can't remotely connect the server through Management Studio. The error I get is the same as some of the people in this forum has which is:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
The problem is that I have all protocols enabled and even when I disable firewall and unassign all the ip filters still no go.
I looked at te machine.config file at my server and the connection string bit goes like this:
<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/>
</connectionStrings>
Can anybody tell me wether you think the problem lies here where it says SQLEXPRESS where I actually have Sql Server 2005 installed.
I've been in and out of every documentation regarding this but they all tell me to configure the protocols and nothing else which doesn't really help.
I have tried running .Net Sql server wizard on the server but it didn't connect probably for the same reasons why I cant connect remotely.
I would really appreciate any help
Thanks
I am using MSSQL Server 2005 Express Studio and tryig to connetch to the remore server but does not work.
I get this error.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Though I have read like child and made changes according to it.
http://support.microsoft.com/kb/914277
Still says same error.
I am clueless how to do it.
Do any one know web based mssql editor where i can connect mssql?
Thanks in advance.
Hello, How are you?
I have a problem when I try to create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE. When I€™m going to choose the data source, the SQL Server 2005 Compact Edition provider doesn€™t appear in the list. I installed the SQL Server 2005 Compact Edition from this page http://www.microsoft.com/downloads/details.aspx?FamilyId=%2085E0C3CE-3FA1-453A-8CE9-AF6CA20946C3&displaylang=en. In the additional information says by installing SQLServerCE31-EN.msi installs the provider (System.Data.SqlServerCe.dll) in the GAC (global assembly cache) and registers the OLEDB provider (sqlceoledb30.dll). So, I don€™t understand why couldn€™t I create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE?
I appreciate your help€¦
I have a SQL Server 2005 database (called BDHSE) in a PC which i call PC1. I have a second PC (PC2) and both are within a network (a WLAN).
What i want is to have access to BDHSE from an application in VB6 (APP1) running in PC2. All the INSERT, DELETE, UPDATE records process is done through APP1.
APP1 ia currently running in PC1 and is to be installed on PC2.
I have these questions:
1. What do i need to install in PC2 since all the INSERT, DELETE, and UPDATE is done using APP1? I guess i only have to install the Microsoft SQL Native Client (with all the prerequisites of course) but i am not sure.
2. In the APP1 made in VB6, do i have to change the connectionstring since i am accesing the database which physically is at PC1 and the APP1 will be used in PC2?
3. Any advice you can give me on doing this will be well received.
Thanks in advance,
BSc Fernando Martinez
Hi,
I am having problem with remote connection via TCP/IP connection on default port 1433. TCP/IP connection are enabled on the server.
any possible solution ?
See problem below:
TITLE: Connect to Server
------------------------------
Cannot connect to ns1.iandigroupltd.com,1433.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
All,
-> SQL Server 2005 Standard set as a named instance, runs as a local system
-> SQL Server protocol enabled: TCPIP (configured to listen on port 1433 with use of dynamic ports disabled)
-> Remote connections through the SQL Server Surface Area Configuration.
Server starts successfully.
But, I received the following error on trying to process a cube from BI studio is -
OLE DB error: OLE DB or ODBC error: Login timeout expired; HYT00; An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.; 08001; TCP Provider: No connection could be made because the target machine actively refused it.
; 08001.
Any hints on how to resolve this problem?
Thanks,
Sanchet
I'M HAVING AN ISSUE, UNDERSTANDING, THE CONNECTION STRING.
I WANT TO CONNECT TO AN INSTANCE OF SQLEXPRESS ON A REMOTE SERVER WITH A FIXED IP ADDRESS
THE TCP PORT IS OPEN TO 1433
I OPENED THE PORT ON THE ROUTER AND THE WINDOWS 2003 FIREWALL
MY CODE IS AS FOLLOWS:
S = "Provider=SQLNCLI;"
S = S & "DATA SOURCE=44.66.777.888,1433SQLEXPRESS;"
S = S & "INITIAL CATALOG=TESTDB;"
S = S & "Persist Security Info=false;"
S = S & "UID=TEST999;"
S = S & "Pwd="TEST999888;"
CnMgt.ConnectionString = S
CnMgt.Open S
I'VE FOLLOWED THE STEPS OUTLINED IN ARTICLE 914277
CAN SOMEONE HELP?
THANK YOU
PS. IF THE CLIENT IS LOCAL, I HAVE NO ISSUE OPENING THE DATABASE.
I DO NEED TO OPEN THE DB FROM FROM CLIENTS.
Hi All,
I've developed an application that connects to a SQL Server 2005 Express database. I created a DSN to connect to the database through ODBC. Currently, I am testing locally and everything works fine.
I would now like to install my application on another workstation and connect remotely to the database located on my development machine.
The client workstation does not have SQL Server 2005 Express installed on it because I would just like my application to connect remotely by creating the DSN and using ODBC. What I'm missing here are the database drivers. The "SQL Natice Client" is not available on this client workstation. How can I deploy the necessary drivers with my installation file so that I may create the required DSN name using the SQL Native Client driver?
Thanks!
Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I AM GOING TO RIP MY HAIR OUT WITH THIS PROBLEM. I have reinstalled both sql server express 2005 and VWD about 5 times with the same problem. please, please, please someone throw me a bone here and help me resolve this problem.
When I create a new EMPTY website and I rightclick on my website in the solution explorer and choose add item, I chooe SQL Database, I give it a name 'database.mdf' and click add. I get the following message:
you are attempting to add a database to an asp.net application. for a database to be gfenerally consumable in your site, it should be placed inside the 'app_data' folder. would you like to place the database inside the 'app_data' folder? I click YES (I know this message is normal)
then I get the following message:
Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I can add anything else but this damn mdf file.
thanks for all your help in advance.
Hi All,
I have created an application using service broker.i have a source database which in a particular server say server A and want to send message to target database which is in another server say server B.
i have configured all the service broker objects and advanced service broker objects in correct way by reffering the site --http://www.sqlservercentral.com/columnists/sindukuri/2797.asp
but when i am trying to send message from my source server to target server , i am getting the following error in sys.transmission_queue.
Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'.
I have enabled the tcp port in both the server.
Note-My source server is an XP and Target Server is an windows server 2003.
can anybody please tell do i need to set any extra configuration in windows server 2003 or any thing do l need to do which i have left.
please do help!!!!!!!!!!!!!!!!!!
Thanks a lot in advance.....................................
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for
XP. However, when I try to add a new data source through ODBC Connection
Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the
SQL Native Client to not show up in the list of available ODBC data sources?