I have a SQL2000(sp2) database (ServerA) and a SQL7(sp2) database(ServerB)
From the SQL2000 database I want to call a remote stored procedure on ServerB and store the result set in a table on ServerB.
E,g
insert TableA
exec ServerB...sp_GetStuff
If I try this by making serverB a remote server,
I get the following error message
Server: Msg 18456, Level 14, State 1, Line 1
Login failed for user 'sa'.
If I make ServerB a Linked server, I get the error
Server: Msg 8501, Level 16, State 1, Line 1
MSDTC on server '' is unavailable.
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
Now the MSDTC on ServerB won't start - It returns error 3221229574 to which the solution seems to be to reinstall MSDTC which looks like a very messy job with registry hacks and also the threat of reformatting the hard drive So I don't want to do this if possible
I really don't want a distibuted transaction anyway so I tried to stop the transaction being promoted using
SET REMOTE_PROC_TRANSACTIONS OFF
Hi, I was wondering is anyone can help me out on this one, I want to run a query, but I need to reference a Database that exists on a different server. I am using SQL 6.5 Any suggestions would be welcomed, Thanks a mill, Fin
I'm calling a procedure on a remote Server (local SQL2005, remote SQL2005) and I need the return value.
Local: declare @value int execute ('exec mbtest1.dbo.psybcis ?', @value OUTPUT) at [REMOTESQLSERVER] select @value
Remote: create procedure [dbo].[psybcis] (@value int OUTPUT) as begin select @value = '13' end
I do not get a value in the OUTPUT variable - just NULL. Documentation says: Execute a pass-through command against a linked server { EXEC | EXECUTE } ( { @string_variable | [ N ] 'command_string [ ? ] ' } [ + ...n ] [ { , { value | @variable [ OUTPUT ] } } [ ...n ] ] ) [ AS { LOGIN | USER } = ' name ' ] [ AT linked_server_name ] [;] There is an OUTPUT parameter, but how does it work? Is my syntax wrong?
It works when using following syntax, declare @value int exec [REMOTESQLSERVER].mbtest1.dbo.psybcis @value OUTPUT select @value but I need to use this procedure call in a distributed transaction to a Sybase ASE server and this syntax is not allowed for cross-system-calls. So first I want to get it work from SQL2005 to SQL2005.
We have server with Sql2008 R2 RTM 64 bit standard edition.We installed 2012 sp1 64 bit standard edition in win2012sp1 64 bit as side by side setup.After installation, i found the below error when i opened SSCM:
Remote Procedure Call Failed:
I fixed this error by renaming the MSC file.
At event log i am observing continuously below error:
Source:       Application Error   Event ID:     1000
Faulting application name: wmiprvse.exe, version: 6.3.9600.16384, time stamp: 0x5532e9c9
Faulting module name: svrenumapi100.dll, version: 2009.100.1600.1, time stamp: 0x4bb681be
I can't access SQL Server 2008 R2 remotely on Windows 2008
1. TCP/IP Enabled for SQL Server Network Configuration Protocols, SQL Native Client 10.0 configuration clients, and SQL Native Client 10.0 configuration clients(32 bit)
2. Firewall disabled to make sure its not interferring with things.
I noticed the SQL Server Agent is Stopped. Not sure if this is the issue. When I try and turn this from disabled to Automatic or Manual, I get this error:
I've read the other posts related to this issue, but I'm just REALLY confused as to whats happening in my case. Like everyone else it was working fine in SQL 2000 but now in SQL 2005 there is an issue. I'm calling a stored procedure with parameters defined like this:
When I execute the call to the stored proc I get this:
"The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 8 ("@BaseDebit"): The supplied value is not a valid instance of data type numeric. Check the source data for invalid values. An example of an invalid value is data of numeric type with scale greater than precision."
Using the VS.NET command window I then inspect that parameter to see what the heck is going on and get this:
So I set a decmial parameter to 1,000,000, that parameter in the DB is defined as decimal(28,13) so should fit no problem, but it seems the Sql data provider is confused and thinks 1,000,000 is decimal (0,22)???
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
I'm calling this from another sql server.... I created a linked server... and want to restore database backups on the other box.... The restore script runs fine when ran locally but fails with the message below when calling it remotely
Server: Msg 3013, Level 16, State 1, Line 1 RESTORE DATABASE is terminating abnormally. Server: Msg 3101, Level 16, State 1, Line 1 Exclusive access could not be obtained because the database is in use.
CREATE PROCEDURE usp_restore_database_backups AS
RESTORE DATABASE BesMgmt FROM DISK = 'D:MSSQLBACKUPBesMgmtBesMgmt_backup_device.bak ' WITH --DBO_ONLY, REPLACE, --STANDBY = 'D:MSSQLDataBesMgmtundo_BesMgmt.ldf', MOVE 'BesMgmt_data' TO 'D:MSSQLDataBesMgmt.mdf', MOVE 'BesMgmt_log' TO 'D:MSSQLDataBesMgmt.ldf'
WAITFOR DELAY '00:00:05'
EXEC sp_dboption 'BesMgmt', 'single user', true GO
I have set it to read only dbo only .... single user.... still get the same message.... does anyone have any suggestions....
I know that Unix and Windows don't mix very well in more than one way. However, the reality is that most places use both and it appears that SSIS (out of the box) has just about zero support for heterogeneous environments. Has anyone come up with a way (kludge will be gladly accepted) to execute a unix script on a remote unix host? Is anyone using any third-party product like MKS with SSIS?
On a similar note, can you use the execute process task to execute remote windows commands?
is there any way to execute a SSIS package at the SQL Server programatically from a remote computer? (I use .net 2)
I don't need variables or return values, I only want to start the package. I know that it is easier to do that job with a webservice etc on the SQL Server but I cannot use such.
A method to call a package from a stored procedure would also help me a lot
We have schedule process server, calling SSIS package via command line (see below) to physical SSIS server. Get message "insufficient for component" and package call bombs.
Facts:
1. schedule process server has Workstation tools / Clients / Connectivity for SSIS loaded
2. SSIS is 2005, SP1
What are we missing?
c:>dtexec /DTS "File SystemSalesDWgyp_dm_carrier" /SERVER BPATLQDDW /CONFIGFILE "\bpatlqddwd$SSISSalesDWgypdm.dtsconfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Error: 2006-11-09 10:43:34.94 Code: 0xC00470FE Source: DTF - Xfer DW to DM DIM_CARRIER DTS.Pipeline Description: The product level is insufficient for component "Slowly Changing Dimension" (289). End Error Error: 2006-11-09 10:43:34.94 Code: 0xC00470FE Source: DTF - Xfer DW to DM DIM_CARRIER DTS.Pipeline Description: The product level is insufficient for component "OLE DB Command" (775). End Error Warning: 2006-11-09 10:43:34.94 Code: 0x80019002 Source: gyp_dm_carrier Description: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:43:32 AM Finished: 10:43:34 AM Elapsed: 2.383 seconds
Hi, I have an integration solution that backs into two databases. Database A is custom and Database B is integrated from a COTS product. The manufacturer of B supplies a formal interface as stored procedures (and I intend to honor that contract by limiting my access to B through those stored procs). Now, I have a search that is going to involve a subselect in the form of the following pseudocode:
select a,b from dbA.user.TableX where exists (select a from dbB.user.TableY)
I am trying to avoid creating 2 temporary cursors in the integration application and doing things in-memory (b/c of performance concerns).
So, my q is: How can I make this happen within database A?
/****** Object: Stored Procedure dbo.ostat_CDS_rpt47_2006 Script Date: 4/30/2008 2:25:41 PM ******/ if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[ostat_CDS_rpt47_2006]') and OBJECTPROPERTY(id, N'IsProcedure') = 1) drop procedure [dbo].[ostat_CDS_rpt47_2006] GO
set @tb1= 'margin..ncds0421' set @tb2='Report.dbo.ob_apr08'
set @sql= ' insert into '+@tb2+' select yyyy,mm,dd,HH,sitecode,TrunkOut,SwitchCode,prefixCode,0 isCallback, cast(callcost as decimal (10,5)) cost,count(*) attempt, sum(case when connectflg=1 then 1 else 0 end) connected,sum(talktime) Talktime from '+@tb1+' where yyyy='+ltrim(str(@pYear))+' and mm='+ltrim(Str(@pMonth)) +' and dd between '+ltrim(Str(@pDay1))+' and '+ltrim(Str(@pDay2))+' and talktime >0 and trunkin is null group by yyyy,mm,dd,HH,sitecode,TrunkOut,SwitchCode,prefixCode,cast(callcost as decimal (10,5)) order by yyyy,mm,dd,HH,sitecode,TrunkOut,SwitchCode,prefixCode,cast(callcost as decimal (10,5)) ' --print (@sql) exec (@sql)
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
I have a stored procedure that creates a normalized table from an existing denorm table. So I just need a simple way to call this SP from an aspx page. It would be good though to know how many records were effected, but this is not a requirement.
I have a stored procedure I created in SQL server 2005. Now I need to call the stored procedure in C#. Can someone help me out here? What is the C# code I need to call this stored procedure? I have never done this before and need some help. CREATE PROCEDURE [dbo].[MarketCreate] ( @MarketCode nvarchar(20), @MarketName nvarchar(100), @LastUpdateDate nvarchar(2),) ASINSERT INTO Market( MarketCode MarketName LastUpdateDate)VALUES( @MarketCode @MarketName @LastUpdateDate )
dear all i am using VS 2005 and sqlserver 2005.... i created one procedure [dbo].[Rptdailyactivity_jul](@cond Varchar(8000), @Type varchar(100),@groupname4fsumm varchar(100) ,@Fromdate4fsumm datetime, @todate4fsumm datetime) i want to call this procedure from VS how??? i tried based on the following code... usig the following code i can able to manipulate tables...but how i can able to call procedure based on this code??and how i will pass parameters??? ************ Dim Conomandb As New System.Data.SqlClient.SqlConnection("Data Source=HJIOertsv;Initial Catalog=tr;Integrated Security=True") If Conomandb.State = 1 Then Conomandb.Close() Conomandb.Open() Dim Comomandb1 As New System.Data.SqlClient.SqlCommand(strSQL, Conomandb) Dim rsOman1 As System.Data.SqlClient.SqlDataReader = Comomandb1.ExecuteReader() If rsOman1.Read() Then fghghfghf End If Comomandb1.Cancel() Comomandb1.Dispose() rsOman1.Close() ''*********************
I have created a stored procedure only with an insert statement in sql server 2005. How can i call this stored procedure through code in ASP.NET page using vb. i want to pass one parameter that comes from a text box in asp.net page. my emailid is: g12garg@yahoo.co.in pls reply. Thank you Gaurav
Does anyone give me syntax for adding a bcp script within a stored procedure..I had done it once 3 yrs back does'nt seem to work now, and I do not know where I am going wrong?? Thanks
Even though this may be not right place with this issue I would like to try! I facing with the problem “Object Variable or With Block variable not set” while I am trying to execute the stored procedure from Ms. Access form. I need some help very badly or maybe a good sample of code that works in this issue is very welcome.
I have two SQL SERVER server1 and server2. A server1's stored procedure should call server2's stored procedure. how can i do this.please explain me in detail.i am new to this concept.
i created a stored procedure and below is the code segment of it;
create Procedure test1 @price as varchar(50) output, @table as varchar(50) = '' AS
Declare @SQL_INS VarChar(1000)
SELECT @SQL_INS = 'select ['+@price+'] from ['+@table+']'
Exec (@SQL_INS)
Procedure gets 2 parameters, one of them is just INPUT parameter and the other one is both OUTPUT and INPUT. What i wanna do is to get the result set of this procedure to use in my application.
i am working on VC++ (visual studio2005 with sql200).i have created one stored procedure to insert data into table. i want to call this strd procedure in the VC++ main.cpp file....
Could you please help me for the correct syntax code with example.
Hi there. My problem is: I have two stored procedures. 1. SELECT A FROM B 2. SELECT C FROM D WHERE A = EXEC First procedure
The meaning: First procedure gets some Id from B table. The second one gets a DataSet by this Id number. The problem is that when I getting an Id from first proc I use SELECT, than in the second one I use EXEC, and in the end, seconf procedure returns two DataSets. The first contains an Id from first procedure, second contains a valid DataSet. Therefore my application falls because it suppose that valid data in first DataSet. Hoow can I call to stored procedure from another stored procedure without creating two DataSets? P.S. I already tried to use return instead of select in the first procedure. Same result. Thank you
Hi, I would like to trigger a DTS or a stored procedure from asp.net 1.1 BUT I don't want to wait for it to finish. In fact the DTS/Storeproc calculates values into different tables. Those values are not needed immediately. The calculation takes between 20 or 30 minutes. Do you have any idea how to do it ? Thanks
