Remove First Line Within A Flat File
Feb 1, 2008Hello,
Does anyone know of a way to remove the first line of characters from a flat file?
Thank you for your help!
cdun2
ADVERTISEMENT
How Can I Remove The Line Feed/carriage Return In The Last Line Of The Exported Text File ?
Feb 27, 2007Hi,
for some AP issue, the file I upload must be without the line feed/carriage return in the last line.
for example:
original fixed-length file (exported from SSIS)
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
4 <-- with line feed/carriage return in the last line
The file format that AP request. The file only has 3 records, so it should end in the third line.
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
Should I use script component to do it ? I am new for VB . Anyone would help me ?
Thank you all.
Integration Services :: Remove Certain Line Feeds In CSV File
Jun 23, 2015I have a CSV file that I am importing via SSIS into a SQL table.On the Flat File connector, I have specified Line Feed as the row delimiter.The data flow is failing due to some of the rows having line feeds before the end of the row.Is there a way to get rid of some line feeds but not others, so that I can run the data flow successfully.
View 6 Replies View RelatedNeed To Remove Certain Rows From The Flat File Before Transformation
Jun 4, 2007hi
I have a flat file as below
Date 20070606
Empid Salary X1 x2 x3 x4 x5
100 10000 .............................
where 10000 is the salary got on date 20070606 by empid 100
.x1,x2,x3...are the remaining columns in the file.I need to extract the date and also continue reading the remaining data.How can i do this???
Any help?
thanks
ami
After Export To Flat File, All Records Are In One Line, Help!?
Jun 19, 2007I created a package that exports contents from a table to a flat file but all my records are being displayed in a single record. where do i configure it to where each record has its own line. the columns in the flat file are fixed.
View 4 Replies View RelatedCapture Line Of Flat File [Error]
Oct 16, 2006Hi,
I have a flat file with several rows of entire type in one of the rows a string comes and when it goes away to guard in the BD it falls, since I can know in that this row of the flat file the string?????
Flat File Destination -data All On One Line
May 10, 2007I have a flat file destination that Im sending data to, from an OLE DB data source. There are two records, but for some reason they are both going on the same line in the output. This is after setting the output to fixed width, from comma delimited.
Help ?
Flat File Produced But Need Line Returns
Dec 19, 2005My Integration Services creates a flat file using OLE DB Source and then a Flat File Destination. The flat file is created from data from my data source with is just a table with many rows.
Each row in my flat file .txt is appended onto each other, there are no line returns after each record. How can I put in a return after each row in my flat file that is outputted from the Flat File Destination component in conjunction with the properties in my Flat File Connection Manager. What am I missing here in order to ensure each row from my table creates a carriage return in my .txt flat file?
Use Script To Read Date From Specific Line Of Flat File
May 10, 2007I have a few flat files that I need to read a date from. The date will always be on Line No 4 and will be in YYYYMMDD string format in chars 2-9 of line 4
Here's what I have so far to convert the string YYYYMMDD into date format... I don't know enough VB to be able to just hit Line 4... I am sure it's simple so could someone pelase put me out of my googling misery
Code Snippet
Public Sub Main()
'
Dim oStream As New IO.StreamReader("Z:TreasuryFilesdeals.dat")
Dim strReadLine As String, filedate As Date
'??? how to just read a date from the fourth line of the file ??
'strReadLine = oStream.ReadLine()
strReadLine = "A20050331" 'sample string variable
'convert the fourth line of the flat file to a date format
filedate = New DateTime( _
CInt(Strings.Mid(strReadLine, 2, 4)), _
CInt(Strings.Mid(strReadLine, 6, 2)), _
CInt(Strings.Mid(strReadLine, 8, 2)))
'write filedate to package variable
Dts.Variables.Item("User::Load_Date_Loan").Value = filedate
System.Windows.Forms.MessageBox.Show(CStr(Dts.Variables.Item("User::Load_Date_Loan").Value))
'
Dts.TaskResult = Dts.Results.Success
End Sub
Output To Fixed Width Flat File Not Adding Line Breaks
May 19, 2008Hi All,
I have a simple SSIS package that runs a query on the db and outputs a fixed width flat file. I have all my column widths defined and in the connection manager i can preview the output. Everything looks great. All the fields fall where they should and each record is on it's own line.
When i run the SSIS program and then go open my text file with a text editor the ouput is all on the same line. I have tried changing my file format from fixed width to ragging right and adding a row delimiter but that doesn't work either. I feel like i'm missing something small here. It could even be an issue w/ my text editor (although i've tried to open the text file in multiple editors). In the flat file connection manager I have my file defined to be 187 characters long, So figure every 187 characters it should output a new line (it should add the carraige return right?).
Has anyone encountered an issue like this?
Any help would be much appreciated.
SQL Server 2008 :: Carriage Return Line Feeds In Flat File Imports
May 28, 2015I'm in the process of importing a series of flat files into SQL Server. I'm using a ~ to separate the columns and the row delimiter is {CR}{LF}. One of the files has a field that contains the CRLF combination in a few places so that field is split over several rows. This is readily visible when I look at the flat file. However, when I'm importing the file, the Import and Export wizard seems to ignore them and import the files as they should with one row per record.
View 0 Replies View RelatedSSIS Flat File Connection Manager Not Seeing Carriage Return-line Feed
Apr 29, 2006I have a csv file as follows:
"100,002.01","200,00.01",10.98,aaaaaaa,bbbbbbbbbb
"100,002.01","200,00.01",10.98,aaaaaaa,bbbbbbbbbb
"100,002.01","200,00.01","1,000.98",aaaaaaa,bbbbbbbbbb
Note that the third column in the third line is also qualified by quotes whereas the previous two are not. I think this is because of Excel formatting. Is there any way to import this file correctly?
My main problem is that I never know whether a column will be qualified or not because this depends on the value. I need to loop through and import many of these files so a manual workaround is not a option for me.
Integration Services :: Delete Text File Created Through Flat Line Connection?
Jul 6, 2015created a very basic flow in SSIS: extracted table data through ole db connection, added multicast and as end result i created a flat file destination (with .txt file) and a ole db destination.
My question is; how can i delete the .txt file before executing the flow again? Want to avoid that the .txt file has duplicated rows after a second execution of the flow. Is it possible to use scd component or is this way to complicated? A for each loop?
i need a similar solution for the data that will be transported through the ole db destination task....
BIDS Line Charts - Cant Remove Line?
Dec 12, 2007Hi,
When creating a line chart, I would like to be able to show Markers for the data points, but no line between these points (as you can do in excel).
I have set the line setting to none (for the lines of interest), however the lines still show.
Is this a bug, or am i missing something obvious settings-wise?
Cheers,
M
Unable To Edit Pre-defined Flat File Connection Manager Properties In The Flat File Destination Editor
Aug 24, 2007Hi,
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
Did someone else faced this issue?
Thanks,
AQ
Flat File Connection Manager Throws Error When A Column Gets Added To The Flat File
Dec 27, 2006Hi,
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
Output Column Width Not Refected In The Flat File That Is Created Using A Flat File Destination?
May 11, 2006I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Any inputs will be appreciated.
M.Shah
How To Redirect The Error Of A Source Flat File To The Destination Flat File?
Nov 10, 2006Hi all,
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
thanx
Converting Flat File To SQL2005 Table (Flat File From H***)
Feb 11, 2008First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet
Record Length 400
Positions Length FieldName
Record Type 01
1,2 L=2 Record Type (Always "01")
3,12 L=10 Site Name
13,19 L=7 Account Number
20,29 L=10 Sub Account
30,35 L=6 Balance
36,37 L=1 Active
37,41 L=5 Filler
Record Type 02
1,2 L=2 Record Type (Always "02")
3,4 L=2 State
5,30 L=26 Address
31,41 L=11 Filler
Record Type 03
1,2 L=2 Record Type (Always "03")
3,6 L=4 Coder
7,20 L=14 Locator ID
21,22 L=2 Age
23,41 L=19 Filler
Record Type 04
1,2 L=2 Record Type (Always "04")
3,9 L=7 Process
10,19 L=10 Client
20,26 L=6 DOB
26,41 L=16 Filler
Record Type 05
1,2 L=2 Record Type (Always "05")
3,16 L=14 Guarantor
17,22 L=6 Guar Account
23,23 L=1 Active Guar
**There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet
01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use?
I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
Remove The Last Carriage Return And Line Feed From Sql Text Field
Jun 12, 2007I am trying to write a user defined function that will allow me tostrip off the last carriage return and line feed from a text field.We have address fields stored in a text field for our ERP system andsome of them have an extra carriage return and line feed at the end ofthem. This causes havoc when we sync between our ERP system and CRMsystem. If anyone knows a way to solve this problem the help would beappreciated.Examples:Existing Text field with CR:1234 Blah Street<CR>Suite 2345<CR>Corrected Text field:1234 Blah Street<CR>Suitr 2345
View 4 Replies View RelatedReporting Services :: How To Remove Line Character In Stacked Bar Chart
Sep 21, 2015I have a stacked bar chart which i notice a vertical line char. how can i removed this vertical line? I already modified the properties under smart labels under calloutlineanchor, calloutlinestyle, calloutstyle to None but still getting this vertical lines. another things is the data label as you can see in the the first column the 1.8% should be place under the gray color but its already shown before the orange color.
View 3 Replies View RelatedHow Can I Take This Example Flat File And Parse Out Each Section To A New Flat File? Each Section Starts With HD (header Row)
Mar 13, 2006How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
Integration Services :: Flat File Error File Being Created In-spite Of No Errors
Jun 23, 2015I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
View 5 Replies View RelatedIntegration Services :: Get FileName Fo Each File Created Via Dynamic Flat File Destination
Jul 24, 2015Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
SQL 2012 :: Find Out Number Of Columns In Flat File Before Process That Particular File
Apr 14, 2014I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
Export Stored Procedure To Flat File And Add Aggregate To End Of The Text File?
Jan 31, 2008What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
Thanks in advance for any help.
Read Text File From Flat File Connection Manager SSIS
May 13, 2008Hello Experts,
I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle).
PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not..
What should go here ?
->Under Class A
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser, IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
{
//Some code to read file and write it into new file
return DTSExecResult.Success;
}
public const string Property_Task = "CustomErrorControl";
public const string Property_SourceConnection = "SourceConnection";
public void LoadFromXML(XmlElement node, IDTSInfoEvents infoEvents)
{
if (node.Name != Property_Task)
{
throw new Exception(String.Format("Invalid task element '{0}' in LoadFromXML.", node.Name));
}
else
{
try
{
_sourceConnectionId = node.Attributes.GetNamedItem(Property_SourceConnection).Value;
}
catch (Exception ex)
{
infoEvents.FireError(0, "LoadFromXML", ex.Message, "", 0);
}
}
}
public void SaveToXML(XmlDocument doc, IDTSInfoEvents infoEvents)
{
try
{
// // Create Task Element
XmlElement taskElement = doc.CreateElement("", Property_Task, "");
doc.AppendChild(taskElement);
// // Save source FileConnection
XmlAttribute sourcefileAttribute = doc.CreateAttribute(Property_SourceConnection);
sourcefileAttribute.Value = _sourceConnectionId;
taskElement.Attributes.Append(sourcefileAttribute);
}
catch (Exception ex)
{
infoEvents.FireError(0, "SaveXML", ex.Message, "", 0);
}
}
In UI Class there is OK Click event.
private void btnOK_Click(object sender, EventArgs e)
{
try
{
_taskHost.Properties[CustomErrorControl.Property_SourceConnection].SetValue(_taskHost, propertyGrid1.Text);
btnOK.DialogResult = DialogResult.OK;
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
#endregion
}
SSIS - Data Flow To Flat File - Insert At Start Of File
Oct 24, 2007Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
Integration Services :: Network Path For Flat File Destination - Cannot Open Data File
Apr 6, 2015I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
Flat File Connector Stops Processing File On Empty Row And Generates Fatal Error
Dec 27, 2007Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
View 13 Replies View RelatedHow Do I Insert Data From A Flat File Or .csv File Into An Existing SQL Database???
Mar 29, 2006How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
Flat File Connection Manager Not Parsing File Correctly
Apr 3, 2007Hi,
I have a flat file, comma-delimited, with strings in double-quotes.
In the connection manager for the file, I have specified that the Text Qualifier = ""
However, in the preview tab, it still shows the strings as surrounded by the quotes, e.g. "mycol1" whereas it should show mycol1 without the quotes.
Next, when I examine the data in the database after the load, it's messed up there also.
"mycol1" ends up in the database as "mycol1
"mycol2" ends up as "mycol2
This is not right.
I have format set to delimited, header row delimiter crlf, etc.
Any ideas?
Thanks
Unable To Change The File In Flat File Connection Manager
May 27, 2008Hi,
I have a package A which is copied from another existing package B as most of the data structure and ETL mappings are same.
What I need to change in Package A is to change the file in Flat File Connection Manager. I can change it in the conneciton manager editor. However, it is automatically changed back to the previous one everytime when I try to Save All or run the package.
I also tried to copy/paste this Flat File Connection Manager in the same package but samething happen. The package file is not set 'Read Only" so anything else can Saved well except for the File name in connection manager.
Is this a bug? It would be very appreciated if anyone can give me any idea about this.
Thanks,
Jenny