In SSRS 2005, is there any way to programatically turn off a Jump To Report link. i.e. set Hyperlink action to none through code. Also is there any way to remove all links upon exporting to excel.
Thanks
I have a report that uses report parameters and navigation in the textbox.
When I click in the textbox, it jumps to the same report, but I cannot see the report parameters any more(hidden ). I cannot change the report parameters.
When I use only the report paramenters (no navigation option), they appear always during the run time.
How can I do to keep the report parameters visible all the time using "jump to the same report"??
Thank you so much. indyw
How do I jump to another report based on a value in my current report. The report that I am jumping from has no parameters, just values.
View 7 Replies View RelatedHello,
Very strange phenomenon with the "Jump to report:" Hyerlink Actions when I deployed my reports to the production servers:
The Actions no longer funcioned properly when attempting to go to one report to another. Sometimes, the same report would come up and sometimes a different report. It appeared that whatever mechanism Report Server uses to construct the proper URL when using "Jump to report:" is unreliable(or the URL is not being honored by the web-server).
All this is happening under the Report Viewer control. I have had to do a painful fix of manually constructing the entire absolute URL and including the reportviewer control in the url.
Any way to get back relative Jump to report: URL's?
Thanks JS
Can someone tell me good books or links for Report services?
View 1 Replies View RelatedI have a report that I put links to other reports in the page header.
When I click on those links, I get the error:
"source of the report definition has not been specified"
If I move the links to the body of the report, they work fine.
Is this a bug or a limitation, and will we eventually be able to put links in the header?
Thanks!
BobP
Hello,
Besides the one in the subscriptions where you tick a checkbox to include the report link, I would just like to ask if its possible to get the link of a report from the report server and add it in another report as reference?
Like for example, I have report A. If i tick the checkbox of Link in the subscription of the report, the server will send the report with the report link in the bottom of the report.
Now I have report B, and I would like to show report A link in that report.
Please advice if this is possible.. We have too many reports to just hard code every single report link in one report..
Thanks in advance
Hi all,
Heres the setup...
We have an asp application that runs the reportserver URL for the selected report, passing it through parameters. This opens the report viewer and the report runs.
The problem im having is that one report is not working as expected. When the report is run from report manager, everything works fine. The links do what they're meant to (they link to other reports passing through parameters). When the report is run from our asp application with the report viewer, the links fail.... they dont pass through the correct values or sometimes dont pass through a value at all.
Were the report viewer and report manager applications developed seperately?
Any help would be appreciated.
Thanks.
Hi
I want to use Jump to Report option under Navigation tab.
I have two reports both with Same parameters and parameters are multiple value selectable.
In Jump to Report this is how I set the parameter value.
LeadershipTeamId =Join(Parameters!LeadershipTeamId.Value,", ")
CostCentreId =Join(Parameters!CostCentreId.Value,", ")
CostElementGroupId =Fields!CostElementGroupId.Value
This works fine if I have only one value selected for CostCentre and LeadershipTeam but when I select the multiple value I get the following error.
The value provided for the report parameter 'LeadershipTeamId' is not valid for its type. (rsReportParameterTypeMismatch)
Am I missing anything here?
Any help would be highly appreciated.
Best Regards
Hi all,
I have created a hyperlink(textbox) with an action property setting of "Jump to report" The report I am jumping to takes 5 parameters. I want to pass 4 of the parameters from the main report and have the user enter the 5th. I have mapped the 4 parameters and in preview mode, everthing works great. In preview mode, the parametrs are passed and the last parameter is left waiting for entry. After deployment, this is not the case. In the deployed state, I simply get an error that parameter #5 is blank. Is there there something I am missing?
regards,
Bill
Hi,
I have setup reportserver with default settings (non https) and afterwards in IIS added a certificate and https support.
Know I am able to work really well and secure over the internet, but some links in report manager pointing to http://server.domain.com/reports instead of https:
For example if i call a report and then in the top there are (view, properties,...)
- View is HTTPS
- Properties is HTTPS
- History is HTTP
- Subscription is HTTP
I have read some articles - mentions I should configure https, but
- in Report Configuration you could not setup HTTPS
- in rsreportserver.config i have entered the https link version but did not change anything
- in RSWebApplication.config the Reportserverurltag is blank - so i did not change anything
Thanks for any help
HANNES
Hi all,
Is it possible to use the "jump to report " action and have the report open in a new window?
regards,
Bill
Hello.
I have a report with a graph in it.
I want to jump to another url when I'm clicking on my report.
I know how to sat the action for clicking inside the report on one of the data number but I want it to jump when I'm ckicking anywhere on the report.
Is there a way to do so?
Thanks.
Can I have a report that is nothing more than a parameter and when the user selects from the list it will jump to another report based on which parameter was selected?
I can create a report with a text box that I can click to jump. I'd like to be able to eliminate the click on text box if possible and jump directly from parameter select pull down box.
Thanks.
Hi,
I have a report that uses Jump to Report and passes Reportname with parameter. Is
there a way to suppress the parameter value in the URL so the user is unable
to manipulate the parameter and execute the changed URL?
This is what I have so far..
="http://<servername>/ReportServer?/<folder>/<reportname>&<parametername>="+Fields!<fieldname>.Value.tostring
because when reports exported to excel, hyperlink path will be displayed and should not display to the user.
Or can we set Hyperline action dyamically?
Thank you.
RSUser
Hello,
I have a report (Report1) with a subreport (SubReport2). The subreport is a barchart. On the data values for the chart, I have a "Jump to Report" action defined. This jumps to another report(Report3) that has some parameters on it. Neither Report 1 nor SubReport2 have any parameters, only Report3.
When I jump to Report3, I would like to have it open up blank with the parameters open to be selected. I don't want to pass in any parameters as I jump to it. This works perfectly when I test it in my Preview pane in BIDS. However, when I upload the report to the ReportServer, when I click on SubReport2 to jump to Report3, I get an error saying
The 'Months' parameter is missing a value
There is no parameter pane for me to choose the parameters (or any other report viewer pane). However, if I open Report3 directly without trying to use Report1 and SubReport2 to jump to it, the parameter pane is there, everything works right.
Does anyone know how I can get the parameters pane to show up when I jump to Report3?
Thanks,
Andy
I am very new to SSRS & SSAS .
Here is my problem. I have a SSRS report that uses a SSAS cube for as it's datasource. I have a drop down parameter box where the user can select a year (2005,2006,2007,etc..) They click the View Report button and the report is generated. On one of the textboxes properties, on the navigation tab I have Jump to Report activated. I select the parameter from the receiving reports with the value of the dropdown box.
What I'm trying to do and can't, is to jump to that report passing the contents of the dropdown box. The receiving report is a SSRS report with a datasource being the SSAS. How do I make the receiving report open based on the parameter that was sent ??
All ideas are welcome...
Thanks ..
Hi all,
I have got a report with external hyperlink.
When I put this link in TextBox properties >> Navigation >> Jump URL of my gridView : http://www.micheldegremont.com it works.
However, if I put "http://www.micheldegremont.com?id=" + Fields!ID.Value it doesn't work. I haven't not link in my report.
And if I put http://www.micheldegremont.com?id=Fields!ID.Value my report create a hyperlink to http://www.micheldegremont.com?id=Fields!ID.Value and no http://www.micheldegremont.com?id=1
Thanks for you help.
How do I jump to another report based on a value in my current report?
View 5 Replies View RelatedHi,
I jumped from one report to enter (useing the "jump to report" option).
How can I go back to the first report?
I tried with the "backspace" button and I tried useing "javascript:history(-1)".
Thanks
Greetings,
I have two reports, Report A and Report B.
Report A has two parameters defined as "Prompted", meaning the report input area is available for the user.
Report A parameters ---> StartDate, EndDate
When Report B invokes Report A using the Jump To Report Functionality and passing Report B's StartDate and EndDate parameters, Report A seems to think the parameters are implied and not needed and fails to drop down the parameter input area.
This is not desired because the user should be able to change report A's parameters.
Anyone know a workaround?
Hello Everyone,
I have a report which runs in local mode and while designing the report I have placed a single image control inside the list box as I don't know before hand how many images are there :
What is the way to show all the images using the one image control inside the report viewer control. ? Can be 2 or 3 or 4.....
Thanks for all the help.
Harsimrat
Hi
I need to be able to click a hyperlink in one report to open a linked report, but without automatically running the linked report.
Scenario.
I have a report showing customer details and on this page there is a link to a price enquiry report. This price enquiry report has two parameters: customer code and product code.
When I click the price enquiry hyperlink in the customer details report I can only attach a value to the customer code parameter. The product code parameter is not known at this stage and would have to be provided by the user after the price enquiry report is opened (but not run). The customer code parameter should already be filled (carried in the link).
When I click the link at the moment I get the error "The 'product' parameter is missing a value".
Any advice much appreciated.
Thanks,
SQLServant
Hello
I have set up a report with a field in a list as a link to another report . I am passing all the parameters in correctly (4 parameters : 1 from a field value and 3 from parameter values). When I run the report and click the link, it jumps to the other report but one parameter is missing a value - the parameter I got from the field value. I really don´t know why this is happening as it was working fine until I added another parameter to the reports and suddenly it doesn´t work anymore.
Is there a limit on the number of parameters I can pass or something?
Please help!
Hi all,
We are developing some reports in Reporting Services 2005 (deployed in Sharepoint). We are having a bit of a problem with the drill down functionality:
When drilling, the report page "jumps", repositioning itself so that the item I drilled is at the top of the page. Not what I wanted, I want it to expand the item without repositioning it.
So, any ideas on what my problem is? I am in kind of a hurry to fix this problem (as always ...).
Regards,
Daniel
I have a parameterized main report that contains a link to a sub report with parameters. Then from the sub report I have a link that takes you back to main report. If I use multi value parameters or single value parameters the links going back and forth between the two reports works just dandy, when I run it on my PC. However when I deploy the reports to the Web Server, the link going from the sub report back to the main report only works if the parameters are single select. Going from the Main to the Sub it doesn€™t matter.
This is the error I get using multi select parameters going from the sub report back to the main.
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
Any suggestions?
I'm getting the following error message
[rsNonAggregateInMatrixCell] The Value expression for the textbox €˜IMAGE_TOTAL_1€™ references a field outside an aggregate function. Value expressions in matrix cells should be aggregates, to allow for subtotaling.
the cell it is refering to is in the data area of a matrix.
The value expression is =sum(Fields!IMAGE_TOTAL.Value,"MAIN")
this cell also has a navigation set to "job to a report"
When i take out the navigation the warning messages go away.
Is there an issue with using navigation link on a textbox with an aggregate in it?
ps - everything runs fine I just get a warning message.
Hello, I've been researching this for some time. Does anyone know if you can conditionally jump to a report? Something like this:
=iif(Fields!TEST.Value = "?????" And Fields!TEST2.Value > 0, TestDetailReport, "")
I've tried this based on the text color also but keep getting errors like this:
The expression for the textbox €˜TESTBOX€™ contains an error: [BC30451] Name 'TestDetailReport' is not declared.
Is what I'm trying to do here just not possible?
Thanks,
Dennis
Hi
Is it possible to set a "jump to report" option where the user can select which report to jump to from a list. E.g
If I click on the Company field it allows me to select to either jump to the company sales report OR the company purchases report
thanks
Is there a way to jump from one report to a specific bookmark in the second report? I have a chart that jumps quite nicely to a filtered version of the report, but instead would like to be able to jump to the entire report at the specific location (e.g., Bookmark) related to the chart data item.
I know that it's quite easy to jump to a bookmark within the same report. What I can't quite determine is how to jump from one report to a specific section in a second report.
Thanks.
Hello everyone,
I have a report that has a "Jump to report:" link in it and in the report it jumps to there is another "Jump to report:" link. When I click on this link I get the following error.
The path of the item '(null)' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. (rsInvalidItemPath)
I have tried moving the link from the header to the body of the report with the same results.
This is only happening in the web reportviewer control as our windows app works flawlessly.
We are running SQL SERVER 2005 SP2.
Does anyone have a fix, workaround or idea how to resolve this issue?
Thanks in advance
-JW
I have one report (R1) which includes a list of ports ("=Fields!Port_Name.Value")
Another report (R2) supplies details for individual reports and has a parameter named PortDWIDPortName which gets port names from the same dimension as those in R1. So in the field properties of the Port field in R1, I selected Navigation > Jump To Report and entered PortDWIDPortName = Fields!Port_Name.Value (also tried changing .Value to .Key or .UniqueName) but although it jumps to report R2 it does not enter a value for the parameter (ie leaves it blank or displays <Select Value> depending on whether multivalue or not).
Does anyone know the right syntax to pass the parameter ? If not, does anyone know to view what Jump To Parameter is returning so I can figure how to doctor it!
Thanks
Hi all, Hope someone can help me on this. I have a dataset from a stored Procedure which I am displaying on a table, I am using the option from the navigation tab "jump to report" from one of the Textboxes in the table. But I want to use the same set of data but filtered with the selected option on the table. I already have parameters for the Stored Procedure passing them to the "jump to report". But I just cannot figure out how to pass the set data set but filtered for my next report. Is there a way to do this.Or do I have to create another version filtered of the stored procedure used for the original. Ideally, it would be great to use the same dataset but filtered. Hope my question make sense. Thanks in advance jard
View 14 Replies View Related