Remove All Constraints In A Database
Jun 11, 2007Hi Everyone..
I want to remove all the constraints from all the tables in a database. I'm using SQL Server 2000.
will you please help me.. Thanks in advance
with regards
Fraijo
Hi Everyone..
I want to remove all the constraints from all the tables in a database. I'm using SQL Server 2000.
will you please help me.. Thanks in advance
with regards
Fraijo
Hi,
There is a master table having a relationship with 3 other tables.
1. Master Table
2. Table 1
3. Table 2
4. Table 3
Table 1 has a foriegn key having a relationp with Master table which has a primary key.
Table 2 has a primary key having a relationp with master table which has a foriegn key.
Table 3 has a primary key having a relationp with master table which has a foriegn key.
Now, there is a prevention of deleteting / truncating data in master table bcoz of having a relationp.
The requirement is to truncate data in master table removing constraints temporarily and set the constraints as it exists after the data deleted.
Pls suggest a suitable solution on this.
Regards,
Srinivas Alwala
Hi!I need to write a script that will remove any constraints and triggers fromany table in a specified database.My problem is that i don't know where are stored in the system tables theconstraints and relations... I've been told that once this would be found,i would just have to use cursor in order to remove those.And by the way, i'll need to re-apply the constraints after a couple ofoperations on the databases...Is this something i can possibly do? Do you have any clue or tips for me?Thanks!Etienne
View 1 Replies View RelatedI know this is probably a flick of a switch but I cannot figure out which switch. Setup is SQL Server / Stored Procedures / DAL / BLL(skipped for testing) / PL. The stored procedure queries from only one table and two columns are ignored because they are being phased out. I can run the stored procedure and preview the data in the DAL but when I create a page with an ODS linked to the DAL and a GridView I get this error. I checked every column that does not allow nulls and they all have values. I checked unique columns (ID is the only unique and is Identity=Yes in the table definition). I checked foreign-key columns for values that are not in the foreign table and there are none. Any ideas why do I get this?
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Hi,
I am getting the above error when trying to load a report into my Web Application, I have tracked the error down to one specific field in my database. Even though this field is a NVarChar field and is of size 30 it would seem that there is an issue returning the value from the field. I can write it into the database no problems but when I try to get it out of the database it returns the above error.
e.g
MOB 401.908.804 - Fails
0401.907.324 - okay
8239 9082 (pager) - fails
Anyone got an idea on how to fix this????
Regards..
Peter.
Trying to get all the constraints for particular Tables in my database. I try:
SELECT constraint_name, constraint_type FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
and getting nada?
How to check if DB Constraints are enabled in a database?
View 6 Replies View RelatedHi all, I am trying to delete all of my table constraints and I generated this script:
declare @table_name sysname
declare @alter_table_statement varchar(256)
declare @const_id integer
declare @prt_obj integer
declare @const_name varchar(256)
declare @parent_name varchar(256)
-- definindo o cursor...
declare constraint_id cursor local fast_forward for
select
id
from
sysobjects
where
XTYPE='PK'
OR
XTYPE='F'
order by
parent_obj
declare parent_obj cursor local fast_forward for
SELECT
PARENT_OBJ
FROM
SYSOBJECTS
WHERE
XTYPE='PK'
OR
XTYPE='F'
order by
parent_obj
-- definindo o cursor...
-- apagando as constraints...
open constraint_id
open parent_obj
fetch next from parent_obj into @prt_obj
fetch next from constraint_id into @const_id
set @parent_name = (select name from sysobjects where id=@prt_obj )
set @const_name = (select name from sysobjects where id=@const_id)
select @alter_table_statement = 'alter table '+ ltrim(rtrim(@parent_name)) + ' drop constraint ' + ltrim(rtrim(@const_name))
exec(@alter_table_statement)
while @@Fetch_Status = 0
begin
fetch next from parent_obj into @prt_obj
fetch next from constraint_id into @const_id
set @parent_name = (select name from sysobjects where id=@prt_obj )
set @const_name = (select name from sysobjects where id=@const_id)
select @alter_table_statement = ('alter table '+ ltrim(rtrim(@parent_name)) + ' drop constraint ' + ltrim(rtrim(@const_name)))
exec(@alter_table_statement)
end
close constraint_id
close parent_obj
-- desalocando o cursor...
deallocate table_name_cursor
deallocate constraint_id
deallocate parent_obj
The problem is that this script doesn't complete it's action because of constraint reference problem.
The constraint 'PK__justification__0FEC5ADD' is being referenced by table 'justification', foreign key constraint 'FK6F298AF2E0E77479'.
Can I turn off this constraint verification?
Or there is another way to delete this constraints?
Guys,
I have 600 tables in my database, out of which 40 tables are look up value tables. I want generate truncate scripts which truncates all the tables in order of Parent child relationship excluding lookup tables. Is there any way to do this apart from figuring out Parent Child relationship and then writing the truncate statements for each of the table.
For example
EmployeeDetail table references Employee table
DepartmentDetail table references Department table
Department table references Employee table
My truncate script should be
TRUNCATE TABLE DEPARTMENTDETAIL
TRUNCATE TABLE EMPLOYEEDETAIL
TRUNCATE TABLE DEPARTMENT
TRUNCATE TABLE EMPLOYEE
Is there any automated way to figure out parent and child tables and generate truncate script for the same.
Thanks
Any tool, script, procedure, or otherwise that will solve this problem?
CREATE TABLE [Table 1] (
Id varchar,
TableTwoId varchar,
OtherData varchar )
CREATE TABLE [Table 2] (
Id varchar,
MoreData varchar )
What is the link between these two tables?
I have databases that have zero keys defined, no foreign key constraints, no unique value constraints. I cannot assume that an Identity column is the Id. The end game is be able to output that [Table 1].[TableTwoId] = [Table 2].[Id] but cannot assume that all linkage in the database will be as simple as saying "if the field name contains a table name + Id then it is the Id in that table."
Currently have written a script that will cycle through all columns and start identifying keys in singular tables based on the distinctness of the values in each column (i.e. Column1 is 99% distinct so is the unique value). It will also combine columns if the linkage is the combination of one or more columns from Table 1 = the same number of columns in Table 2. This takes a long time, and it somewhat unreliable as IDENTITY columns may seem to relate to one another when they don't.
CREATE TABLE [Table 1] (
Id varchar,
TableTwoId varchar,
OtherData varchar )
CREATE TABLE [Table 2] (
Id varchar,
MoreData varchar )
What is the link between these two tables?
I have databases that have zero keys defined, no foreign key constraints, no unique value constraints. I cannot assume that an Identity column is the Id. The end game is be able to output that [Table 1].[TableTwoId] = [Table 2].[Id] but cannot assume that all linkage in the database will be as simple as saying "if the field name contains a table name + Id then it is the Id in that table."
Currently have written a script that will cycle through all columns and start identifying keys in singular tables based on the distinctness of the values in each column (i.e. Column1 is 99% distinct so is the unique value). It will also combine columns if the linkage is the combination of one or more columns from Table 1 = the same number of columns in Table 2. This takes a long time, and it somewhat unreliable as IDENTITY columns may seem to relate to one another when they don't.
Hi,
How can I copy a database table with all its data, indexes and constraints to a new table in the same database in sql server 2005
i need to do patching of the application servers, some of the databases are configured in availability group .as part of this need to remove the database from availability and rejoin the db after doing patching .
View 5 Replies View RelatedLoooks like I have a corrupt database. I cannot delete it because "database is used for replication" I am told in an error box . There are no items shown when trying to expand the database. Opening Query anylizer the database is not shown in the dropdown box. If I try to create a database with same name SqL says it is already there. Also the database icon is grey not yellow like the active working databases. Anyone have an Idea of how to get rid of this rogue database. This was a temp entry and no backup was made
Thanks
Keith
Hi all,
I tried to remove AdventureWorksDB in the "Add or Remove Programs" of Contol Panel and I got the following errors: (1) AdventureWorksDB Error 1326: Error getting file security: CProgram FilesMicrosoft SQL ServerMSSQL1MSSQLGetLastError: 5. |OK| and (2) Add or Remove Programs Fatal Error during installation (after I clicked the |OK| button). Please help and tell me how I can solve this problem.
Thanks in advance,
Scott Chang
I have uninstalled the CTP version of the SQL Server express so that I can install the released version but CTP version is still listed in the add/remove program list but without the change/remove button. I have been to different sites to find information on cleaning this up and I have ran all the uninstall tool I can find but the problem still prevails. I cannot install the released version without completely getting rid of the CTP version. Please help anyone.
Thanks
deebeez1
As part of patching i need to remove the database from availability group and add the database after patching is done , how can i achieve this ?
View 2 Replies View RelatedHi All,
How to remove case sensitity from database like table names,column names etc.
If we type either select * from AUTHORS" or "select * from authors" should result the same value.
Abdul
I have a table that was set up with a primary key - that i need to change. The problem is that the database is being replicated to a remote location, and will not allow me to remove or change the primary key on a published database.
Due to the size of the database and bandwith limitations it is not an option to re-initialise the published database.
Is there any to do this without breaking replication
i have a data base sql Server .I wrote a stored procedure or attach my database but it is attached in read only mode how can remove read-only.
this is my stored procedure.
create procedure attache
as
declare @trouvemdf int
declare @trouveldf int
if exists (select name from sysdatabases where name='Gestion_Parc')
[Code] ....
i try this EXEC sp_dboption 'Gestion_Parc', 'read only', 'FALSE' but it causes those error
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C: Gestion_Parc.mdf". Operating system error 5: "5 (Access is denied.)".
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C: Gestion_Parc_log.ldf". Operating system error 5: "5 (Access is denied.)".
Msg 945, Level 14, State 2, Line 1
[Code] ....
We are using server 2012 and SQL express.I am trying to omplement a new software called Ifineo and at deployment is dumps the following error (unfortunately French):
2015-10-27 14:36:57.8983|INFO|InsideSQLAssistant.Assistant|Connecteur Sage 100 Gesttion Commerciale v20
2015-10-27 14:37:18.3024|ERROR|InsideSQLAssistant.Assistant|Error (1807): Impossible d'obtenir un verrou exclusif sur la base de données 'model'. Recommencez l'opération ultérieurement.
Échec de CREATE DATABASE. Certains noms de fichiers de la liste n'ont pas pu être créés. Voir les erreurs associées.
[code]...
Now I did try to set it in sing user or multiple user and the following command to kill some parts of it:
select 'KILL ', spid
from master..sysprocesses
where dbid=db_id('Votre Base')
But my admin still remains connected to the DB(I have even disabled it but still the same)there seem to be to persons connected to the db the admin and my account, found that via exec sp_who
I'm attempting to alter a database by removing one of two log files. I have truncated both log files successfully and the database has no processes but I get an error stating file cannot be removed because it is not empty. Help
View 2 Replies View RelatedI have a table that is corrupted and want to remove and add a backup version of it. How can i remove this table and add it again preserving all the foregin key restraints, permissions, dependencies, etc? Simply exporting and importing does not work. I could painfully remove the table and then painfully reconnect it again, recreating all the foreign key restraints, etc, by hand; but there has to be an easier way! What is the How-to?
Thank you!
Llyal
I am using the Database is Oracle SQL Developer, here the Requirement is like Before insert the values in Database I need to remove the Database table and insert new values.
DELETE FROM XXMBB_NOSVOS_TMP_VO_NO WHERE EFFECTIVE_DATE BETWEEN
'01'
|| '-'
|| TO_CHAR(to_date(:N_Date,'DD-MM-YY'),'MON-YY')
AND to_date(:N_Date,'DD-MM-YY')
AND LEDGER_ID = LED and name_rdf='NOSVOS';
COMMIT;
DELETE FROM XXMBB_NOSVOS_BAL_TMP_VO_NO WHERE
PERIOD_NAME = TO_CHAR(add_months(to_date(:N_Date,'DD-MM-YY'),-1),'MON-YY')
[code]....
I was trying to update an SSAS database on a test server and got the following error when trying to deploy from Visual Stuido. I get a similar error in SMS. I tried to delete the database before deploying but I get an error when trying to delete. I rebooted the server.
(SQL Server 2005 R2, Windows Server 2008R2.)
Error 1 File system error: The following file is corrupted: Physical file:
?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbDim Age.0.dim5.Dim Age.Dim Age.dstore. Logical file . Errors in the metadata manager. An error occurred when loading the Age dimension, from the file, '?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbDim Age.5.dim.xml'. Errors in the metadata manager. An error occurred when loading the Heidtman DW cube, from the file, '?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbHeidtman DW.7.cub.xml'. 0 0
Hi all,
I am new to SQL 2005 and I am trying to drop a user from a database called TESTDB. When I try to delete the user I get the following error message:
User,group or roll 'test' already exists in the database (Microsoft SQL Server,Error :15023)
How can I remove the user from the database in MSSQL2005 server
Please help me
Thank you,
Chamith
I need help,
I am having a hard time removing my SQL instance inside the Add/Remove program. After i select the SQL Instance name and then I tried to remove it but it won't allow me to delete it. There isn't any error message or whatsoever. Actually, when i try to log it in my SQL Management studio, that certain sql instance name is not existing according to the message box. Is there any way to remove the Sql Instance in my system?
I appreciate your help, Thanks
IS Support
We are running SQL server 2003 with SP3. I'm trying to
shrink a data files with the emptyfile option so I can
eventually remove the file using the alter database
command. However, I get the following error message when I
run the alter database command:
Error: the file PRADATA4 cannot be removed because it is
not empty.
The file that I'm trying to remove still has 62 extents on it.
I looked MS Knowledge base 254253 and 279511 on this problem but they say it is corrected by SQL server 7.0 with service pack 3.
commands that I'm running are as follows:
1) USE PRA
DBCC TRACEON(8901)
DBCC SHRINKFILE ('PRADATA4', EMPTYFILE)
DBCC TRACEOFF(8901)
2) USE PRA
GO
ALTERDATABASE PRA
REMOVE FILE PRADATA4
GO
Can anyone help?
Thanks
I have a stored procedure that does the following
BEGIN TRANSACTION OUTERTXN
BEGIN TRANSACTION
Copy records from live to archive
END TRANSACTION with commit or rollback
execute sproc to write audit log with success or fail
IF transaction was committed
BEGIN TRANSACTION
Delete records from live the archive
END TRANSACTION with commit or rollback
execute sproc to write audit log with success or fail
End IF
END TRANSACTION OUTERTXN with commit if both inner transactions were successful or rollback if either failed
If either inner transaction rolled back execute sproc to write audit log saying whole process is rolling back End IfMy problem is that if the outer transaction rolls back then I am losing the two audit records because they are part of the transaction scope. I want these executes to commit even if the master transaction fails.
I don't want to any body can backup of my database, even i can also not able to take backup.
View 17 Replies View RelatedI downloaded the AdventureWorks2012 OLTP script. When I ran it it gave me some errors. I also noticed that it tried to install into the bult-in master database, it created a lot of tables and objects. Some questions :
1) How can I remove everything that the script installed into master database?
2) Do I need to create 1st an empty database and then run the script there?
3) I am running the script from a custom path (C:DownloadsMicrosoft SQL Server 2012AdventureWorks 2012 OLTP Script.zipAdventureWorks 2012 OLTP Script) not sure if this is causing some of the errors as the script, in the beggining has a path to other folders :
:setvar SqlSamplesDatabasePath "C:Program FilesMicrosoft SQL ServerMSSQL11.MSSQLSERVERMSSQLDATA"
-- NOTE: Change this path if you copied the script source to another path
:setvar SqlSamplesSourceDataPath "C:Program FilesMicrosoft SQL ServerMSSQL11.MSSQLSERVERToolsSamplesAdventureWorks 2012 OLTP Script"
4) Final question, I also downloaded the AdventureWorks 2012 simple database (AdventureWorks2012_Data.mdf). Is this file the same database as the one created by the OLTP script?
Hi all, i encountered this problem.. whenever i tried to create publications it always prompt me this error msg "sql server replications does not support nicknames,such "." or "(local)". i know i need to delete the registration and register a new server with a different name.. i just want to double confirm whether deleting the registration will affect the databases or not ? :
View 1 Replies View RelatedI was trying to test mirroring and now would like to delete the mirror database but it says I need to remove database mirroring first. I deleted the endpoint and cannot figure out how to remove the mirroring. Can someone please help.
View 1 Replies View Related