Hi,
I have now this (1 record) result:
;Admins;Sales;SalesAdmin;Other;Sales;Admins;All users;
Now, as you can see, there are some double rolenames.
I see admins and Sales 2 times between ";".
Is there a way to filter that out?
So that this will be the result:
;SalesAdmin;Other;Sales;Admins;All users;
Thanks!
HyNever use/practice SQL a lot, (vb... more, have free msde 2000) .2 questionsA)is it simple to write a T-SQL query for having 2) at result startingfrom 1) .B)how to test dynamically sql with parmaeter ( using vb ADO)1) before querycolumA columBd e <-samee d <-samee ee d <-same2)after querycolumA columBd e or e de e
View 2 Replies View Relatedif l have a field conating data that has quoutes around it like field idno "2809085009084 ". How would l remove the quotes ????
View 1 Replies View RelatedI imported data from flat file to SQL Server database table. After execution one of column got data with double quotes. It look like:
22222.....02/14/2014....."Smith, John"
333........02/14/2014....."Brownies, Alian"
How to remove quotes?
I have a SQL select syntax as below
0 AS SalaryMin,
2088 AS SalaryMax,
2088 AS BillableHours,
'Month' AS SalaryPaidCode,
0 AS SalaryBreakdownHourly,
0 AS SalaryBreakdownDaily,
[Code] ...
While outputting to CSV.file
I got :0,2088,2088,"Month",0,0,0,0,0,0,0,"N/A","N/A","G","N/A","Exempt","Other",1
How can I remove all double quotes in the string fields? so that O can get the result as below while the output
0,2088,2088,Month,0,0,0,0,0,0,0,N/A,N/A,G,N/A,Exempt,Other,1
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:
SHOWS
showID
showTitle
SHOWACCESS
showID
remoteID
VIDEOS
videoDate
showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?
thanks
I'm using AVG in a simple query but the results are being returned as INTEGERs and not the correct DOUBLE form.
AVG is being used on integer fields in a .mdf database eg: "SELECT AVG(intField) AS Results FROM myDB"
Thanks,
Geoff
I've put a SelectCommand with an aggregate function calculation and AS into a SqlDataSource and was able to display the result of the calculation in an asp:BoundField in a GridView; there was an expression after the AS (not sure what to call it) and that expression apparently took the calculation to the GridView (so far so good).
If I write the same SELECT statement in a C# code behind file, is there a way to take the aggregate function calculation and put it into a double variable? Possibly, is the expression after an AS something
that I can manipulate into a double variable? My end goal is to insert the result of the calculation into a database.
What I have so far with the SelectCommand, the SqlDataSource and the GridView is shown below in case this helps:
<asp:GridView class="gridview" ID="GridView2" runat="server" AutoGenerateColumns="False" DataSourceID="lbsgalDataSource">
<Columns>
<asp:BoundField DataField="Formulation" HeaderText="Formulation" SortExpression="Formulation" />
<asp:BoundField DataField="lbs" HeaderText="lbs" SortExpression="lbs" />
<asp:BoundField DataField="gal" HeaderText="gallons" SortExpression="gal" />
<asp:BoundField DataField="density" HeaderText="density" SortExpression="density" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="lbsgalDataSource" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT
a.Formulation,
SUM (a.lbs) AS lbs,
SUM ((a.lbs)/(b.density)) AS gal,
( ( SUM (a.lbs) ) / ( SUM ((a.lbs)/(b.density)) ) ) AS density
FROM Formulations a INNER JOIN Materials b
ON a.Material=b.Material WHERE Formulation=@Formulation GROUP BY Formulation">
<selectparameters>
<asp:controlparameter controlid="DropDownList1" name="Formulation" propertyname="SelectedValue" type="String" />
</selectparameters>
</asp:SqlDataSource>
We are working on an application which aggregates news articles from various sources. The problem is, when querying the database, is that there are a lot of double results because some of the sources get their news from the same press agency. To clarify things a bit here's a link to an example:
http://84.244.146.27/Zoekresultaten.aspx?SearchQuery=Amsterdam
As you can see, there are a lot of the same results. What we want is to filter out the double results irrespective of the source. In other words; when the query encounters the first result, display that and leave out the other same results.
I've tried filtering them out by using DISTINCT on the 'news header' / results, but that does not seem to work. Any ideas on how to get this done?
Any help is greatly appreciated!
Would like to have a view created to display the result at the bottom of this message. We will be using Dreamweaver to display the information from this view. Also, for the record, we are using sql 2000. Any help would be greatly appreciated.
tblservers
servid servername
1 server1
2 server2
3 server3
tblapplications
appid appname
1 app1
2 app2
3 app3
tblapplink
id appid servid
1 1 1
2 1 2
3 1 3
4 2 1
5 2 3
6 3 1
we want to display this information as below:
appname serverlist
app1 server1, server2, server3
app2 server1, server3
app3 server1
Thank you very much,
mrtwo
Stored Procedure ProblemThis is probably a simple problem but i would appreciate some help.I have a stored procedure that takes the order date time plus other information fromvarious tables but the information is being returned double:ie 4 rows are being returned instead of two. Can anyone see where i am going wrong?Many thanksMartinThis is the stored procedureALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct OD.DateCreated, O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNThese are the results that are returnedDateCreated OrderID UserID OrderTotal Sent Delivered Paid CustomerName ----------------------- ----------- ------------------------------------ ---------------- ------ --------- ------ --------------- 18/10/2006 14:49:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 14:49:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(4 row(s) returned)If I leave OD.DateCreated ie use ALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNthen there is no problem. I get:41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(2 row(s) returned)
View 2 Replies View RelatedI've got a query that returns the data I need. I want to put the query in a stored procedure such that, when the SP runs I get a pipe delimited text file on disk. I don't really want to mess with SSIS, etc. Is there a Q&D way to do this?
View 1 Replies View RelatedHello, I have a situation that I query a table and return multiple rows (email addresses). I want to iterate through the rows and concatenate all email addresses into one string (will be passing this to another stored procedure to send mail). How can I process result rows inside a stored procedure? This is what I have so far: CREATE PROCEDURE [dbo].[lm_emailComment_OnInsert] @serviceDetailID int,@comment varchar(500),@commentDate DateTime,@commentAuthor varchar(100)ASBEGINDECLARE @serviceID intDECLARE @p_recipients varchar(8000)DECLARE @p_message varchar(8000)DECLARE @p_subject varchar(100)/* Grab the Service_id from underlying Service_Detail_id*/SELECT @serviceID = Service_id FROM lm_Service_Detail WHERE Service_Detail_id = @serviceDetailID/* Get email addresses of Service Responsible Parties */
SELECT DISTINCT dbo.lm_Responsible_Party.EmailFROM dbo.lm_Service_Detail INNER JOIN
dbo.lm_Service_Filing_Type ON dbo.lm_Service_Detail.Service_id = dbo.lm_Service_Filing_Type.Service_id INNER JOIN
dbo.lm_Responsible_Party_Filing_Type ON dbo.lm_Service_Filing_Type.Filing_Type_id = dbo.lm_Responsible_Party_Filing_Type.Filing_Type_id INNER JOIN
dbo.lm_Responsible_Party ON dbo.lm_Responsible_Party_Filing_Type.Party_id = dbo.lm_Responsible_Party.Party_idWHERE (dbo.lm_Service_Detail.Service_Detail_id = @serviceDetailID)/* Build message */
SET @p_subject = "KLM - Service ID: " + CAST(@serviceID AS varchar(4))SET @p_recipients = "" /*need string of addresses*/
SET @p_message = @p_message + "Service Detail ID: " + CAST(@serviceDetailID AS varchar(4)) + char(13)SET @p_message = @p_message + "Comment Date: " + CAST(@commentDate As varchar(25)) + char(13)SET @p_message = @p_message + "Comment Author: " + @commentAuthor + char(13)SET @p_message = @p_message + "Comment: " + @comment + char(13)PRINT "subject: " + @p_subject + char(13)PRINT "recip: " + @p_recipients + char(13)PRINT "msg: " + @p_message + char(13)/*Send the email*/
Execute master..xp_sendmail @recipients = @p_recipients, @message = @p_message, @subject = @p_subject END
GO
Using Flat File Connection Manager, I am specifying Text Qualifier = Double quotes{"}, and i have TXT file with one column for lastname and first name as "LN,FN", and settings are set to comma delimted, now the connectin manager is creating two different columns for LN and FN,
it was never a problem in DTS 2000.
any work around.
Thanks,
I have a column of type Decimal(14, 4) in my SQL server 2005 database.
When producing the result set on this column, i need to convert the values to varchar datatype and also i do not want the trailing zeroes to be displayed.
For eg:
If the value stored is 98.7500, my select query should provide an output of 98.75.
Similarly if the value stored is 98.0000, my select query should output 98.
I tried converting the value to "float" and then assigning to varchar data, however doing so i am incurring precision loss in some scenarios
See below:
Declare @ele as varchar(25)
Select @ele = Convert(float, 99999.9990)
select @ele
Output I received: 100000
Output I wanted: 99999.999
Are there any in-built functions in SQL to achieve what I need?
Hello
When you set the results from a query to text, very often you end up with a format like:
job_id name
---------------------------------------------------------------------- ------------------------------------------------------------------------------------------------
Is there a way to get rid of the extra space between two columns? Sometimes it's more than the width of my screen between columns
Thanks!
Worf
i have this query: SELECT top 1 DATEADD(year, -2, @sDate)AS ydate which returns 2005-01-01 00:00:00.000,how can i remove the time values and only display the date?
thanks!
Funnyfrog
I am having problems building a CTE. I have a table:
declare @tbl table ( ID int, S time(0), E time(0) )
with the following data:
insert@tbl ( ID, S, E )
values ( 1, '03:00', '05:00' ),
( 1, '04:00', '06:30' ),
( 1, '22:00', '23:00' ),
( 1, '23:00', '23:40' ),
( 1, '23:30', '23:45' )
I need to build a CTE that will eliminate overlaps and produce the following result:
ID S E
-- --------- ---------
1 03:00:00 06:30:00
1 22:00:00 23:45:00
I have to write a Stired Procedure with the following functionality.
Write a simple select query say (Select * from tableA) result is
ProdName ProdID
----------------------
ProdA 1
ProdB 2
ProdC 3
ProdD 4
Now with the above result, On every record I have to fire a query Select SUM(sale), SUM(scrap), SUM(Production) from tableB where ProdID= ["ProdID from above query"].How to write this query in a Stored Procedure so that I can get the required SUM columns for all the ProdID's from first query?
i am makin an address block
trying to make it (address1 + ' ' + address2 + ' ' + address3) as address
is there a way to get rid of the address2 if there is nothing in it
Remove Fields From results from Innerjoin In Sql
--------------------------------------------------------------------------------
Hi, I' ve been struggling for a few days with following problem.
I have a query with 2 tables (below). They are joined by one key field checknr.
I would only like to see field comm from table OTCUser.checklistcomm, but only the last result which are conform to the condition. So the fields in bold shouldn't appair.Could someone help me ?
SELECT MAX(p.Modifdatum) AS modifdatumv, OTCUser.checklistcomm.comm, p.Status, p.station, p.checkitem
FROM OTCUser.checkliststat p INNER JOIN
OTCUser.checklistcomm ON p.Checknr = OTCUser.checklistcomm.checknr
GROUP BY p.station, p.checkitem, OTCUser.checklistcomm.comm, p.Status
HAVING (p.Status = '2') AND (p.station = '00BE104740')
ORDER BY p.station, p.checkitem
modifdatum comm status checknr station
10/04/2007 11:15:20 comment0 2 00BE104740 14
10/05/2007 8:57:45 comment1 2 00BE104740 14
10/10/2007 11:59:35 comment2 2 00BE104740 14
10/04/2007 11:15:20 comment 2 00BE104740 16
10/04/2007 11:15:20 comment 2 00BE104740 17
10/08/2007 17:20:43 comment 2 00BE104740 18
10/04/2007 11:15:20 comment 2 00BE104740 22
10/04/2007 11:15:20 comment 2 00BE104740 24
10/04/2007 11:15:20 comment 2 00BE104740 25
10/04/2007 11:15:20 comment 2 00BE104740 26
10/08/2007 17:20:43 comment 2 00BE104740 26
10/04/2007 11:15:20 comment1 2 00BE104740 27
10/08/2007 17:20:43 comment2 2 00BE104740 27
10/04/2007 11:15:20 comment 2 00BE104740 31
Hi All,
I'm currently using an Execute SQL Task to return XML data from a query into an SSIS string variable. In my FOR XML clause in SQL I'm specifying a certain name for my root tag, called "Accounts". This works great in Management Studio, however, the Execute SQL Task appends a <ROOT> and </ROOT> tag to the start and end of the string, so now it looks like:
<ROOT><Accounts>...all my elements...</Accounts></ROOT>
I'd like to remove the ROOT tags so that the <Accounts> tags are actually the root for this doc. What would be the best way to remove the ROOT tags from the SSIS string variable?
Thanks!
Hi, have configured an ODBC linked server for an Adaptive Server Anywhere (ASA6.0) database.
I have to write a function (not a procedure) that receives a number (@Code) and returns 1 if it was found on a table in the linked server, or 0 if not. Looks very simple...
One problem, is that the queries on a linked-server must be made through the OPENQUERY statement, which doesen't support dynamic parameters. I've solved this making the whole query a string, and executing it, something like this:
SET @SQL='SELECT * FROM OPENQUERY(CAT_ASA, ''SELECT code FROM countries WHERE code=' + @Code + ''')'
EXEC sp_executesql @SQL
(CAT_ASA is the linked-server's name)
Then, i would use @@ROWCOUNT to determine if the code exists or not. But before this, a problem appears: sp_executesql is not allowed within a function (only extended procedures are allowed).
Does somebody know how to make what i want?? I prefer to avoid using temporary tables.
Thanks!
I am performing a series of calculations where accuracy is very important, so have a quick question about single vs double precision variables in SQL 2008.
I'm assuming that there is an easy way to cast a variable that is currently stored as a FLOAT as a DOUBLE prior to these calculations for reduced rounding errors, but I can't seem to find it.
I've tried CAST and CONVERT, but get errors when I try to convert to DOUBLE.
For example...
SELECT CAST(1.0/7.0 AS FLOAT)
SELECT CONVERT(FLOAT, 1.0/7.0)
both give the same 6 decimal place approximation, and the 6 decimals make me think this is single precision.
But I get errors if I try to change the word FLOAT to DOUBLE in either one of those commands...
SELECT CAST(1.0/7.0 AS DOUBLE)
gives "Incorrect syntax near )"
SELECT CONVERT(DOUBLE, 1.0/7.0)
gives "Incorrect syntax near ,"
Every night we connect to a remote server using Linked Server and copy details from that database to a loading table, then load it into the 'real' table in our own environment. The remove database we load it from has indexes/primary keys that match the 'real', however the 'loading' table itself does not have any indexes or primary keys, both are SQL Server 2005 machines.
In the loading table we first of all truncate it then do a select insert statement from the remote server, then we then truncate the 'real' table and load iit from the 'loading' table.
The issue is when we attempted to load it into our 'real' table from our loading table there was a duplicate row, and our process failed with a Primary Key violation.
I checked the source with does have the same primary key's in, it did not contain a duplicate row and I checked the loading table and that did contain a duplicate row.
My question this is in what circumstances this could happen ?
I have a results table that was created from many different sources in SSIS. I have done calculations and created derived columns in it. I am trying to figure out if there is a way to remove duplicate rows from this table without first writing it to a temp sql table and then parsing through it to remove them.
each row has a like key in a column - I would like to remove like rows keeping specific columns in the resulting row based on the data in this key field.
Ideas?
Thanks,
Ad.
Customers order a product and enter in a source code (sourceCd). This sourceCd is tied to a marketing program. Idea being we can see that 100 customers ordered from this promo, 200 from this catalog, etc etc. The sourceCd that a customer enters is not always accurate so there is a magic process that adjusts this OrigSourceCd into a final SourceCd, that may or may not be the same.
I am trying to generate a result set of customer count by sales program based on both the original and final source code. Problem is, I have to do each query separately because in one, I have to join SourceCdKey to SourceCdKey to get the program associated with that SourceCd and in the other i have to join OrigSourceCdKey to SourceCdKey to get the program associated with the original sourceCd. There are some programs is one results set that are not in the other, and vice versa.
I'm trying to generate a list of that shows customer counts before and after for each program, some which may be null for one, but have counts for the other. I have tries creating 2 separating views and joining them but that doesn't work because it only returns the ones they have in common.
My query produces accurate results just produces one instance for each sales region. I am needing it to only give me one instance of each sales region and give me total counts. What should I re-write?
Code:
Select
salesmanname,
case when [state] IN ('GA', 'FL', 'AL', 'SC', 'NC', 'TN') Then 'South'
when [state] IN ('CA', 'NV', 'WA', 'OR', 'TX') Then 'West'
when [state IN ('NY', 'NJ', 'PA', 'DL', 'CT') Then 'NE'
end As [Sales Region]
[Code] ....
Hi All:I've read a whole slew of posts about creating temp tables using storedproceedures to get the crosstab ability, but I'm wondering if, for thisspecific case, there might be a more efficient way.What makes this question different from the others that I've read isthat I'm using user defined functions, not tables. I actually thinkthat I've got the crosstab thing down, it's just passing the parameterto the 2nd udf that's messing me up.I've got a people table and an address table. Each person can havemultiple addresses. I need to create a dataset that has in each rowthe name of the person, the first address, any second address, and anythird address. I only need to show the first 3, so if there's 100, Ican just ignore the rest.I created a user defined function to return the 1st, 2nd, or 3rdaddress for a given person.udf_ReturnAddress(PersonID,MatchNumber)Another user defined function returns the people that I'm looking for(potential duplicates for a person in this case).udf_ReturnPossibleDupsForAPerson(PersonID)SELECTMain.FoundPersonID, Main.LastName, A1.Street, A2.Street,A3.StreetFROMudf(ReturnPossibleDupsForAPerson(@PersonID) MainTableCROSS JOIN(SELECT Street1 FROMudf_ReturnAddress(Main.FoundPersonID,1) Adr1) A1CROSS JOIN(SELECT Street1 FROMudf_ReturnAddress(Main.FoundPersonID,2) Adr2) A2CROSS JOIN(SELECT Street1 FROMudf_ReturnAddress(Main.FoundPersonID,3) Add3) A3If, for the first parameter for the return address function, I replaceMain.FoundPersonID with the ID of a person, it works just fine. Iobviously don't want a static id as a parameter - I want to use the IDof the person that the first udf found. Leaving the variableMainTable.PersonID there causes an error in the query designer though.I get "Error in list of function arguments: '.' not recognized.So maybe my problem is that I just don't know how to pass the id of theperson that's found by the first UDF as the parameter of the functionto find the found person's 3 addresses.Any guidance would be greatly appreciated!ThanksKen
View 6 Replies View RelatedInside my sp on the Primary server are 3 commands:
exec msdb..sp_start_job @job_name = N'JobA' --
Running on Primary ServerEXEC Server2.msdb.dbo.sp_start_job @job_name = N'JobB';Running on Secondary ServerSelect * from Server2.Table --
Running on Secondary Server
So far the commands are working just fine when I kick them off one at a time. But when I kick off the sp as a whole I notice that the timing just isn't keeping up. For instance, Step 3 is running before Step 2 is finished. It appears that as the Primary Server kicks off Step 2, it doesn't seem to care about the outcome and moves right to Step 3 which in turn provides me erroneous data.How can I get Step 3 to wait until Step 2 is actually finished keeping in mind the Secondary server is part of this equation?
Hi to all,I just need to get two fields from a table and manipulate the resultsin next query of a procedure.I planned to code like what you seebelow,create procedure marks1as@ sql1 as varchar(50)@ sql1=select registerno ,subjectcode from mark;beginselect * from marksetting where registerno='@sql1.registerno' andsubjectcode='@sql1.subjectcode';endcan it be possible to get the results as shown in the code? elsepropose an alternative for this scenario.Thanks in Advance.
View 4 Replies View RelatedHi,
Please help me with an SQL Query that fetches all the records from the three tables but a unique record for each forum and topicid with the maximum lastpostdate. I have to bind the result to a GridView.Please provide separate solutions for SqlServer2000/2005.
I have three tables namely – Forums,Topics and Threads in SQL Server2000 (scripts for table creation and insertion of test data given at the end). Now, I have formulated a query as below :-
SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads
FROM
Forums f FULL JOIN Topics t ON f.forumid=t.forumid
FULL JOIN Threads th ON t.topicid=th.topicid
GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate
ORDER BY t.topicid ASC,th.lastpostdate DESC
Whose result set is as below:-
forumid
topicid
name
author
lastpostdate
NoOfThreads
1
1
Java Overall
x@y.com
2008-01-27 14:48:53.000
2
1
1
Java Overall
a@b.com
2008-01-27 14:44:29.000
2
1
2
JSP
NULL
NULL
0
1
3
EJB
NULL
NULL
0
1
4
Swings
p@q.com
2008-01-27 15:12:51.000
1
1
5
AWT
NULL
NULL
0
1
6
Web Services
NULL
NULL
0
1
7
JMS
NULL
NULL
0
1
8
XML,HTML
NULL
NULL
0
1
9
Javascript
NULL
NULL
0
2
10
Oracle
NULL
NULL
0
2
11
Sql Server
NULL
NULL
0
2
12
MySQL
NULL
NULL
0
3
13
CSS
NULL
NULL
0
3
14
FLASH/DHTLML
NULL
NULL
0
4
15
Best Practices
NULL
NULL
0
4
16
Longue
NULL
NULL
0
5
17
General
NULL
NULL
0
On modifying the query to:-
SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads
FROM
Forums f FULL JOIN Topics t ON f.forumid=t.forumid
FULL JOIN Threads th ON t.topicid=th.topicid
GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate
HAVING th.lastpostdate=(select max(lastpostdate)from threads where topicid=t.topicid)
ORDER BY t.topicid ASC,th.lastpostdate DESC
I get the result set as below:-
forumid
topicid
name
author
lastpostdate
NoOfThreads
1
1
Java Overall
x@y.com
2008-01-27 14:48:53.000
2
1
4
Swings
p@q.com
2008-01-27 15:12:51.000
1
I want the result set as follows:-
forumid
topicid
name
author
lastpostdate
NoOfThreads
1
1
Java Overall
x@y.com
2008-01-27 14:48:53.000
2
1
2
JSP
NULL
NULL
0
1
3
EJB
NULL
NULL
0
1
4
Swings
p@q.com
2008-01-27 15:12:51.000
1
1
5
AWT
NULL
NULL
0
1
6
Web Services
NULL
NULL
0
1
7
JMS
NULL
NULL
0
1
8
XML,HTML
NULL
NULL
0
1
9
Javascript
NULL
NULL
0
2
10
Oracle
NULL
NULL
0
2
11
Sql Server
NULL
NULL
0
2
12
MySQL
NULL
NULL
0
3
13
CSS
NULL
NULL
0
3
14
FLASH/DHTLML
NULL
NULL
0
4
15
Best Practices
NULL
NULL
0
4
16
Longue
NULL
NULL
0
5
17
General
NULL
NULL
0 I want all the rows from the Forums,Topics and Threads table and the row with the maximum date (the last post date of the thread) as shown above.
The scripts for creating the tables and inserting test data is as follows in an already created database:-
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Topics__forumid__79A81403]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1)
ALTER TABLE [dbo].[Topics] DROP CONSTRAINT FK__Topics__forumid__79A81403
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Threads__topicid__7C8480AE]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1)
ALTER TABLE [dbo].[Threads] DROP CONSTRAINT FK__Threads__topicid__7C8480AE
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Forums]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Forums]
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Threads]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Threads]
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Topics]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Topics]
GO
CREATE TABLE [dbo].[Forums] (
[forumid] [int] IDENTITY (1, 1) NOT NULL ,
[name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[Threads] (
[threadid] [int] IDENTITY (1, 1) NOT NULL ,
[topicid] [int] NOT NULL ,
[subject] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[replies] [int] NOT NULL ,
[author] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[lastpostdate] [datetime] NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[Topics] (
[topicid] [int] IDENTITY (1, 1) NOT NULL ,
[forumid] [int] NULL ,
[name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Forums] ADD
PRIMARY KEY CLUSTERED
(
[forumid]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Threads] ADD
PRIMARY KEY CLUSTERED
(
[threadid]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Topics] ADD
PRIMARY KEY CLUSTERED
(
[topicid]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Threads] ADD
FOREIGN KEY
(
[topicid]
) REFERENCES [dbo].[Topics] (
[topicid]
)
GO
ALTER TABLE [dbo].[Topics] ADD
FOREIGN KEY
(
[forumid]
) REFERENCES [dbo].[Forums] (
[forumid]
)
GO
------------------------------------------------------
insert into forums(name,description) values('Developers','Developers Forum');
insert into forums(name,description) values('Database','Database Forum');
insert into forums(name,description) values('Desginers','Designers Forum');
insert into forums(name,description) values('Architects','Architects Forum');
insert into forums(name,description) values('General','General Forum');
insert into topics(forumid,name,description) values(1,'Java Overall','Topic Java Overall');
insert into topics(forumid,name,description) values(1,'JSP','Topic JSP');
insert into topics(forumid,name,description) values(1,'EJB','Topic Enterprise Java Beans');
insert into topics(forumid,name,description) values(1,'Swings','Topic Swings');
insert into topics(forumid,name,description) values(1,'AWT','Topic AWT');
insert into topics(forumid,name,description) values(1,'Web Services','Topic Web Services');
insert into topics(forumid,name,description) values(1,'JMS','Topic JMS');
insert into topics(forumid,name,description) values(1,'XML,HTML','XML/HTML');
insert into topics(forumid,name,description) values(1,'Javascript','Javascript');
insert into topics(forumid,name,description) values(2,'Oracle','Topic Oracle');
insert into topics(forumid,name,description) values(2,'Sql Server','Sql Server');
insert into topics(forumid,name,description) values(2,'MySQL','Topic MySQL');
insert into topics(forumid,name,description) values(3,'CSS','Topic CSS');
insert into topics(forumid,name,description) values(3,'FLASH/DHTLML','Topic FLASH/DHTLML');
insert into topics(forumid,name,description) values(4,'Best Practices','Best Practices');
insert into topics(forumid,name,description) values(4,'Longue','Longue');
insert into topics(forumid,name,description) values(5,'General','General Discussion');
insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'About Java Tutorial',2,'a@b.com','1/27/2008 02:44:29 PM');
insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'Java Basics',0,'x@y.com','1/27/2008 02:48:53 PM');
insert into threads(topicid,subject,replies,author,lastpostdate) values (4,'Swings',0,'p@q.com','1/27/2008 03:12:51 PM');
I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary',
@profile_name =
'SQL SMTP',
[code]....