Removed Publisher Stays In Replication Monitor.
Dec 5, 2006
We have a publisher that got red-crossed(Run to problem). I decide to remove and recreate it. However, after remove it, the publisher still stays in Replication Monitor. The remain thing has no distributor and logreader, but only snapshot agent. When to check the property of the agent, we got a error message basically say the job does not exist, which makes sense.
Now, it does not show up in any places, except Replication Monitor. Well, it cannot be removed from Replication Monitor. Can any one tell us how to clear it from Replication Monitor?
Thank you.
More Infor: The replication was set up on 2000.(2000 pub, 2000 dis and 2000 sub) with 2005 Management Studio, and the publication was removed with 2005 Management Studio.
View 1 Replies
ADVERTISEMENT
Nov 9, 2006
I have a wired situation..!I set up transactional replication on one of my development server (SQL2000 Dev Edition with sp4).It is running fine without any issues and all of a sudden, i noticed inmy repication monitor tab under Publisher where I usually see thepublication is empty now.I do see the snapshot agent, log reader and distribution agent under myagents inside the replication Monitor. But its usefull to see all 3agents in one window under publisher before. What happend? Is there anyway to get that inside that monitor? Has someone encountered thissitation before? Please advise....After that I tried to create a new set of replication on differentdatabase on the same server and i dont see those either underReplication Monitor - Publishers....All it says is (No Items)....I would appreciate any help to correct this issue... Thanks in advance..
View 2 Replies
View Related
Jan 30, 2007
I have setup transactional replication everything on one box. later(two or three weeks later), Replication monitor is show red X Under my publishers (publications is disconnected). this is SQL2005.
Everyone known how to fix this problem?
Thanks,
Frank
View 1 Replies
View Related
Aug 25, 2004
What happens when Publisher goes down in Transactional
Replication, no corruption (power , hardware failure)??
Thanks,
John
View 1 Replies
View Related
Nov 9, 2015
Is it possible to replicate data from one publishers to a multiple subscribers in transaction replication? In other words I have Server A, Server B, Server C with databases A,B,C respectively. I need to replicate 10 articles from A to B but only 1 from A to C. In other words I want to use the same publisher but select one article from that publisher instead of all 10 to Server C/database C.
If it is possible what will be the drawbacks of such implementation? Will performance be a hit?
View 5 Replies
View Related
Mar 22, 2006
Hi,
Before this, I've 2 difference site that run SQL server 2000 as database server. One at north and the other at west.
At north, I've a group of terminal that run SQL server 2000. I've 1 main server that run as publisher and distributor to all the terminal. And also the main database is at the main server. The terminal will replicate together using merge replication. So that the data would be same at all terminal. At west it also have the same scenario.
Last week my boss ask me to replicate both main server ( north and west ). So that he want the data would be same at all place.
So, can anybody help me.....
View 3 Replies
View Related
Mar 1, 2005
I am using merge replication between two servers.
When i insert data into a perticular table ..the data gets deleted after some time.
Anyone faced this problem?
View 2 Replies
View Related
Feb 12, 2004
What if a Publication and Distribution server machine fail to work. Do I need to reinitiliaze the whole snapshot on a new machine and retransmit the data to the subscriber. Or can I make use of replication script to recreate the publication and distribution and then replicate to existing subscriber using same machine name?
Thanks
View 2 Replies
View Related
Jul 23, 2005
This is the first time that I am trying to implement replication. Icame across with a problem while I was creating my publisher anddistributer. I want to create the publisher and the distributer at thesame machine however I got this error" SQL Server Agent on <machine name> currently uses the system account,which causes replication between servers to fail. In the fallowingdialog box, specify another account for the Service start up account"If I skip this error does it cause any problem? or how can I fix thisproblem? If I give different login and password does the Service startup create any abnormality in the Database?If someone can help me I really appreciate it?RegardsAs
View 4 Replies
View Related
Sep 23, 2015
I want to add some new tables to the existing pub.We are using transactional replication.
As per my knowledge,by using below option we can do it.
exec sp_changepublication
View 6 Replies
View Related
Sep 14, 2007
I have been looking for a way to replicate data from a DB2 system running on an AIX machine. I found some information related to doing this with SQL2000, but not with 2005. Can this be done - preferably without writing our own provider.
Thanks in advance
View 5 Replies
View Related
Jul 16, 2015
I am setting up transaction replication in SQL Server 2012 with three individual servers for Distributor, Publisher, Subscriber, But I want to know how to set the folder for Snapshot agent like whether the folder should be a network shared folder or normal local folder.
View 4 Replies
View Related
Sep 23, 2015
We've got x2 data centers in the US:
NYC & SAC
Sadly the hostnames for the boxes I am trying to replicate are similar:
- db1.nyc.mydomain.tld
- db1.sac.mydomain.tld
The servers can talk to each other over all necessary ports however when I generate a push subscription from the publisher, I am asked to add the SQL Server subscriber and it already shows DB1 listed since itself is DB1.nyc. How can I attach the remote subscriber when setting up the subscription from the publisher if the hostname conflicts in my unique scenario?I created a entry on the publishers host file to use db2sac for the SAC IP and entering that alias in as the remote subscriber but no dice.
View 4 Replies
View Related
Jun 22, 2006
I am executing sp_dropmergesubscription, but the rows are still in dbo.msmerge_subscriptions, and are still shown in the replication monitor as expired; the last synch dates were in april (expiration is set to 10 days). The 'expired subscription clean up' job appears to be running okay. I need to remove these subscriptions from the publisher as the subscribers are mobile devices, which sometimes are lost.
View 5 Replies
View Related
Aug 29, 2006
Hi..
I have configured publisher, distributer,subscriber... and tried to replicate it... it has done successfully...
When i try to add datas to the publisher ... it says
"conflict error"
can you please tell me how to check the replication is successfull or not.
and i want to add datas to publisher so that it should frequently updated in subscriber...
View 1 Replies
View Related
Mar 5, 2007
I had a multi publisher single subscriber replication in my job and now i want remove it. i disabled the subscriber. Now if i disable the publisher and distributor then it gives me a error cannot drop the distribution DB because it is currently in use. this DB can never be dropped since there is at least one publisher at one time that accesses this DB everytime. How should I disable this publication.
View 1 Replies
View Related
Nov 27, 2006
Hi,
I`m trying to setup our sql2000 sp3a sql server as a Publisher.When i use the wizard to config Publishing and Distribution wizard. I recieve the following error:
Sql Enterprise manager could not configure server as the distributor. Error 14133 Could not execute instdist.sql. Check instdist.out in the install directory.
I`ve checked the install directory and cannot find the file instdist.out file. I assume that it failed before completeing this stage.
Has anyone come across this error before and any ideas on how to resolve would be appreciated.
Thanks in Advance,
Steve
View 1 Replies
View Related
Sep 25, 2006
Hi,
I was wondering if it is possible to setup replication between a 2005 SQL Publisher and a 2000 SQL Subscriber? Is there any special setup steps I need?
Thanks so much,
David
View 3 Replies
View Related
Feb 26, 2004
Hi all,
I'm a rather newbie, not only to this forum but also to sql server having a question to the following issue:
Is it possible to drop/remove/delete the "orphan" of a merge subscription on one instance of sql server without having the (former) distributor/publisher (on other instance) available?
The background is: I had a small replication infrastructure with two instances (on two machines), one the publisher and distributor, the other the subscriber. Now it happened that the publisher/distributor machine was completely set up new without having the replication dropped in advance, what remained on the subscriber is now a database with all the merge/replication tables and the guid columns in the user tables.
Moreover this, an entry remained in the subscription saying that a subscription with the former publisher exists...
Can I remove these "orphans" without having to setup the instance again?
Thank you,
Andy
View 4 Replies
View Related
Apr 1, 2015
I am using SQL 2012 SE and implementing transactional replication. I need to insert the rows from publisher database tables to new tables, drop the old tables and rename the new tables with the old table names.
For example:
Publisher database tables that are being replicated:
Table1
Table2
Table3
and I am going to create new tables in publisher database
Table1_new
Table2_new
Table3_new
Move data from
Table1--->Table1_new
Table2--->Table2_new
Table3--->Table3_new
Drop constraints from and then tables (does this require articles to be removed from replication?)
Table1
Table2
Table3
Rename
Table1_new to Table1
Table2_new to Table2
Table3_new to Table3
Does this require replication to set up from scratch or add the three articles only to replication? Is there a way this can be done without pausing or reinitializing replication or without removing articles and adding them back?
View 0 Replies
View Related
Jul 23, 2005
I have taken over a transactional replication setup that is being usedfor fault tolerance (I know, I know...).The scenario I am concerned with is where the publisher goes down due tofailure, so we need to point our application at the subscriber and startupdating the data there. We are not using the immediate updating option.How do I go about re-syncing the publisher with the data that been addedto, or changed on the subscriber, when the publisher comes back online?Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Mar 9, 2007
How to speedup data from subscriber to Publisher on Merge replication?
Is there any we can speed up data from Subscriber to Publisher (uploading).
Subscriber downloading data from publisher running more than 20 hours after drop and recreate subscriber.
Could you please post reply.
Regards
Ponnu
View 2 Replies
View Related
Jul 23, 2005
I'm experiencing some very odd behavior in Enterprise Manager.I have a process that performs the following:1.) Restores a published database from Server A onto Server B. Thedatabasesare identical and they are both published.2.) I run a script that then deletes the subscriptions to thepublication onServer B. I do this via SP_DROPSUBSCRIPTION.3.) I run a script that then deletes the publication. I do this viaSP_DROPPUBLICATION.4.) Deletes the distribution database.5.) Deletes the old jobs.6.) Creates the publication from pregenerated scripts.7.) Adds the subscriber.8.) Adds the subscription.9.) Generates the snapshot and applies it.What's happening is that I'm seeing the job name that's assigned to thedistribution job increment by 1 each time this process is run. Also,I'mseeing ten instances of the publication showing up in the tree view.Everything appears to be rtunning just fine, transactions beingreplicated,etc. I'm just wondering is there something I'm missing in my steps.Plus,after two or three months of this, might not look so good having 90publications showing up in the tree view.Thanks!
View 1 Replies
View Related
May 30, 2007
There seems to be a problem with the replication monitor correctly telling you the progress of applying database schema.
Here is my setup:
Running SQL 2005 SP2. Publishing with merge replication (push) via a VPN. Approx 100 tables with lots of filtering, using data partitions filtered on host_name()
When you create and initialize a new subscription if you go to the Replication Monitor and open the Sync History window for that new subscription. You will see that it is setting up the schema in the subscriber but it does not update the status at the bottom of the window it just continually says:
Applying Database Schema - 0% complete (approzimately 00:00:00 remaining)
If it helps you can see an image of this below you will notice that it is already 15 minutes into a process that will probibly take 2 hours but it still says 0% complete.
If you require any further info or have any suggestions as to why this is not a bug (just me being dumb) please let me know.
You can see an image of this problem here: https://applications.ccusa.com/2/images/snychistory.jpg
Thanks In Advance.
Martin
View 1 Replies
View Related
Apr 15, 2004
I have a primary and secondary servers both running Windows 2000 SP3 with SQL 2000 SP3. I have set up transactional replication with the primary server as publisher and the secondary server has the distributor and subscriber DB. I am testing the scenerio where my primary server goes down and I have to make updates to the secondary server until my primary server comes back up. I am able to update my subscriber database and the transactions go into the MSreplication_queue table to be pushed back to the primary when it comes back up. When I bring the primary server back up and start the queue agent job it starts pushing the transactions over and then stops after 4 or 5 transactions with the error "Failed while applying queued message to publisher". I have attached part of the log file for the agent below
dbserver2.Old_Processing: {? = call dbo.sp_getsqlqueueversion (?, ?, ?, ?)}
dbserver2.Old_Processing: {? = call dbo.sp_replsqlqgetrows (N'DBSERVER', N'Old_Processing', N'Old_Processing')}
[4/15/2004 3:59:47 PM]dbserver2.distribution: exec dbo.sp_helpdistpublisher @publisher = N'DBSERVER'
Connecting to DBSERVER 'DBSERVER.Old_Processing'
DBSERVER.Old_Processing: {? = call dbo.sp_getqueuedarticlesynctraninfo (N'Old_Processing', 21)}
SQL Command : <exec [dbo].[sp_MSsync_ins_IQ2KProcSystem_1] N'dbserver2', N'Old_Processing', '072175', '2004-03-19 00:00:00.000', 1>
DBSERVER.Old_Processing: {? = call dbo.sp_getqueuedarticlesynctraninfo (N'Old_Processing', 15)}
SQL Command : <exec [dbo].[sp_MSsync_ins_NightlyProcess_1] N'dbserver2', N'Old_Processing', '072175', '2004-03-19 00:00:00.000', '2004-04-15 15:56:44.623000000', 'Begin ProcessIQ2KSystem', 'AB14E5D7-C81D-4A39-A8F5-51F1C48227B0', '17E5D98F-EDF0-41D0-9991-97511B850720', 1>
SQL Command : <exec [dbo].[sp_MSsync_upd_IQ2KProcSystem_1] N'dbserver2', N'Old_Processing', '072175', '2004-03-19 00:00:00.000', 1>
DBSERVER.Old_Processing: {? = call dbo.sp_getqueuedarticlesynctraninfo (N'Old_Processing', 7)}
SQL Command : <exec [dbo].[sp_MSsync_upd_TheatreProcess_1] N'dbserver2', N'Old_Processing', '072175', 1, '2004-03-19 00:00:00.000', 1, NULL, '79A114D6-FF31-4E37-AC2D-90C0A0114F40', '072175', 1, '2004-03-19 00:00:00.000', 0, NULL, 'AF61A098-44A3-45D7-B25B-E8EA9CD464A1', 0x2800, 1>
Failed while applying queued message to publisher
Disconnecting from DBSERVER 'DBSERVER'
Worker Thread 692 : Task Failed
Disconnecting from dbserver2 'dbserver2'
Processed 3 queued trans, 3 cmds, 0 conflicts
Queue Reader aborting
In the sql server logs I am getting this message:
Replication-Replication Transaction Queue Reader Subsystem: agent Repl Queue Reader failed. Failed while applying queued message to publisher.
Error: 14151, Severity: 18, State: 1
Any help would be greatly appreciated
View 4 Replies
View Related
Jul 30, 2014
I have a setup of transaction replication between one publisher and subscriber in the Same server.Now, I need to add a new subscriber to the existing publisher. So publisher database name is DB_A and Subscriber 1 name is DB_B. So the new subscriber will be DB_C. Is this kind of setup possible on one server?
If yes then at the time of reinitialization is it going to apply the snapshot on DB_B as well as DB_C?Also let say if due to disk error DB_B gets corrupted then will data be still replicated between DB_A and DB_C? (Assuming publisher, subscriber 1 and 2 are sitting on individual disks).
View 1 Replies
View Related
Nov 6, 2015
For study effect, can I configure merge replication using just one SQL Server Instance?
View 3 Replies
View Related
Jan 16, 2008
Hi,I am trying to set up a Updatable Subscriptions for TransactionalReplication with SQL 2005 (queued updating).I have a stored procedure "SYS_spShellTest" which is replicated to thesubscriber viathe replication option "Execution of the stored procedure":-------------------------------------------------------------ALTER procedure [dbo].[SYS_spShellTest] @cmd varchar(1000)WITH EXECUTE AS ownerasBEGINEXEC @result = master..xp_cmdshell @cmd, NO_OUTPUTReturn (@result)END-------------------------------------------------------------1) If I call "exec SYS_spShellTest" on the publisher the call is alsoexecuted on the subscriber.2) If I call "exec SYS_spShellTest" on the subscriber the call is NOTexecuted on the publisher.How can I make 2) work so that it is also executed on the publisherplease?Thanks a lot,Patrick
View 1 Replies
View Related
Jun 26, 2007
Hello,
Are there any requirements that dictate the SQL Server version for the distribution agent for a SQL 2000 publisher with a transactional push subscription to a SQL 2005 subscriber?
Thanks in advance,
John
View 3 Replies
View Related
Jun 3, 2004
I have to write a little vb6 app to monitor sql 2000 replication. The app must run on the same desktop as the subscriber.
I've tried the samples that comes with sql (replsampl) but that is to do the replication, I need to just monitor replication that was set up in sql 2000.
With monitor I mean to show a red light when replication is busy, so that the user doesn't disconnect from the network while replication is in progress.
Any ideas?
View 1 Replies
View Related
Aug 16, 2006
I have developed a smart device application using SqlServerCE that replicates data to the backend server. I need to provide to the user a status of this replication process. I read about the "MergeSubscriberMonitor" in SQL Server but can't find it in SqlServerCe. Is this possible? Can someone please point me in the right direction?
View 6 Replies
View Related
Aug 25, 2006
Hello,
We have some mobile devices that are setup to replicate with our sql 2005 server via web sync. It seems that the devices are added multiple times within replication monitor. Is there a way to purge the bogus items. For example we have a mobile unit labeled as Device12 we have it listed under the subscriptions 5x. I would like to purge four of them as they are not currently being the replicated one.
Device12-A6EE69A0944 is the valid subscription
Device12-EE44D1EF3E24 is an invalid one.
Thanks in advance.
John
View 1 Replies
View Related
May 8, 2006
When Replication monitor shows an error icon, I removed all the publication jobs completedly. After I reconfigured publishing, subscriber,Distribution, why the replication monitor still shows an error icon even though there is no replication job scheduled?
Thank you!
View 3 Replies
View Related
