Removing Unwanted Stored Procedures.
Oct 14, 1998How do I remove old stored procedures that are no longer being used?
Thanks,
rm
ADVERTISEMENT
SQL 2012 :: Removing Additional Unwanted Log File?
Jul 6, 2015I wanted to remove an extra transaction log file that was no longer required, and ran the following against the database...
DBCC Shrinkfile (DB_Name_log2, Emptyfile);
go
alter database [Db_Name]
remove file DB_Name_log2;
go
I got a successful removal message. But if I go into the properties of the database, and click on files, it still shows up. Why is this and how can I get rid of it?
It shows up in sys.master_files as offline.
Oracle Stored Procedures VERSUS SQL Server Stored Procedures
Jul 23, 2005I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
View 11 Replies View RelatedStored Procedures 2005 Vs Stored Procedures 2000
Sep 30, 2006Hi,
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Thank you in advance for any help on this matter
All My Stored Procedures Are Getting Created As System Procedures!
Nov 6, 2007
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
Thanks,
Jason
Unwanted Sort
Mar 21, 2006Hi All,I am trying to delete rows from a table using a SQL statement similarto this:DELETE FROM TableA where ID1 IN(Select ID1 From TableB where ID2>= @min and ID2<=@max)Basically I want to delete all rows from TableA that have an ID in arange in TableB. This is done in a stored proc.When I look at the execution plan, it is using the indexes as I wouldhope for. The problem is that it is doing a sort which accounts for73% of the cost. I do not need to sort the results. I don't care whatorder they are deleted in.How can I prevent the sort from occuring? I need this delete to occuras fast as possible.Thanks In Advance
View 4 Replies View RelatedHow To Search And List All Stored Procs In My Database. I Can Do This For Tables, But Need To Figure Out How To Do It For Stored Procedures
Apr 29, 2008How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
Using A Stored Procedure To Query Other Stored Procedures And Then Return The Results
Jun 13, 2007Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedHow To Save Stored Procedure To NON System Stored Procedures - Or My Database
May 13, 2008Greetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
How To Remove Unwanted Characters In SQL?
Dec 10, 2007Hi all,
I have a stored procedure that generates the following SQL WHERE clause
UserName LIKE 'Adi234%' AND Fname LIKE 'David%' AND LName LIKE 'Justin%' AND
It is good except that it i can not remove the last AND which is not neccessary at the end of the clause.
I want to remove the last AND that come up at the end, my code places AND after each data field(UserName, Fname, Lname) .
Thanks
Unwanted NVARCHAR Padding
Jan 22, 2004I've created an asp.net page that takes the content of text boxes and writes them to a sql table.
The problem is that when I examine the resulting data in the SQL database, I find that the fields written to have had padding added (up to the maximum size of the fields).
I was under the impression that fields of type NVARCHAR did not store padding (only the no of characters being stored).
I've checked it's not the text boxes on the aspx page by explicitly posting values instead of the boxes content and the same thing happens.
Help
example of function i'm using to post data:
Function AddNews(ByVal Category As String, ByVal ApplicRole As String, ByVal NewsType As String, ByVal Description As String, ByVal News As String, ByVal Hyperlink As String, ByVal Email As String, ByVal BirthDate As Date, ByVal KillDate As Date, ByVal Parent As String) As Integer
Dim connectionString As String = ConfigurationSettings.AppSettings("AuthentConnection")
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "INSERT INTO [News]([Category],[ApplicRole],[NewsType],[Description],[News],[Hyperlink],[Email],[BirthDate],[KillDate],[Parent]) VALUES (@Category,@ApplicRole,@NewsType,@Description,@News,@Hyperlink,@Email,@BirthDate,@KillDate,@Parent)"
Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
dbCommand.CommandText = queryString
dbCommand.Connection = dbConnection
Dim dbParam_Category As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_Category.ParameterName = "@Category"
dbParam_Category.Value = Category
dbParam_Category.DbType = System.Data.DbType.StringFixedLength
dbCommand.Parameters.Add(dbParam_Category)
Dim dbParam_ApplicRole As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_ApplicRole.ParameterName = "@ApplicRole"
dbParam_ApplicRole.Value = ApplicRole
dbParam_ApplicRole.DbType = System.Data.DbType.StringFixedLength
dbCommand.Parameters.Add(dbParam_ApplicRole)
Dim dbParam_NewsType As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_NewsType.ParameterName = "@NewsType"
dbParam_NewsType.Value = NewsType
dbParam_NewsType.DbType = System.Data.DbType.StringFixedLength
dbCommand.Parameters.Add(dbParam_NewsType)
Dim dbParam_Description As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_Description.ParameterName = "@Description"
dbParam_Description.Value = Description
dbParam_Description.DbType = System.Data.DbType.StringFixedLength
dbCommand.Parameters.Add(dbParam_Description)
Dim dbParam_News As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_News.ParameterName = "@News"
dbParam_News.Value = News
dbParam_News.DbType = System.Data.DbType.StringFixedLength
dbCommand.Parameters.Add(dbParam_News)
Dim dbParam_Hyperlink As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_Hyperlink.ParameterName = "@Hyperlink"
dbParam_Hyperlink.Value = Hyperlink
dbParam_Hyperlink.DbType = System.Data.DbType.StringFixedLength
dbCommand.Parameters.Add(dbParam_Hyperlink)
Dim dbParam_Email As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_Email.ParameterName = "@Email"
dbParam_Email.Value = Email
dbParam_Email.DbType = System.Data.DbType.StringFixedLength
dbCommand.Parameters.Add(dbParam_Email)
Dim dbParam_BirthDate As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_BirthDate.ParameterName = "@BirthDate"
dbParam_BirthDate.Value = BirthDate
dbParam_BirthDate.DbType = System.Data.DbType.Date
dbCommand.Parameters.Add(dbParam_BirthDate)
Dim dbParam_KillDate As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_KillDate.ParameterName = "@KillDate"
dbParam_KillDate.Value = KillDate
dbParam_KillDate.DbType = System.Data.DbType.Date
dbCommand.Parameters.Add(dbParam_KillDate)
Dim dbParam_Parent As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter
dbParam_Parent.ParameterName = "@Parent"
dbParam_Parent.Value = Parent
dbParam_Parent.DbType = System.Data.DbType.StringFixedLength
dbCommand.Parameters.Add(dbParam_Parent)
Dim rowsAffected As Integer = 0
dbConnection.Open
Try
rowsAffected = dbCommand.ExecuteNonQuery
Finally
dbConnection.Close
End Try
Return rowsAffected
End Function
Remove Unwanted Logins .
Jun 18, 2002Hi ,
I have lot of SQL logins which do not have access to any databases . They do not show any database access when i check their properties .
My server is SQL 7.0 with SP 3 .
I want to clean up those logins with the help of script instead of deleting every login manually which is time consuming as i have to check the database access before deleting the login.
Is there any where script available or any other way to delete these unnecessary logins ? Also will it be a problem on the SQL Server if i delete those logins at one command ?
Any info. will be helpful to me.
Thanks
Sandeep .
Unwanted Auto-incrementing
Aug 17, 2006Here is a simplified version of my problem:
I am inserting data into a table using a stored procedure. The table has an identity column that increments with each insert. When I use erroneous data in the other fields the insert fails….no surprises there! But when the next insert occurs with valid data I find that my identity field has increased even with those inserts that failed, so my sequence has jumped a few numbers. How do I get the identity inserts to roll back if the rest of the data in a row doesn’t insert successfully?
Marcha x
Unwanted Date Conversion - Please Help
Jul 3, 2007Hello, I have a report that is based on a dynamic column. The column is specified by the user, and the column tyep may be text, datetime, or bigint. The user specifies the column name, and there is also a parameter that specifies the type. I allow my users to format the date via passing in a date format string, so my code looks something like:
=Switch
(
Parameters!primarycolumntype.Value = "text",
Fields(Parameters!primaryitemcolumn.Value).Value,
Parameters!primarycolumntype.Value = "date",
[DO DATE FUNCTIONS HERE, e.g. Year(Fields(Parameters!primaryitemcolumn.Value).Value)],
Parameters!primarycolumntype.Value = "numeric",
Fields(Parameters!primaryitemcolumn.Value).Value
)
The trouble I am running into is that I am getting invalid date conversion errors whenever a text value is being supplied - in other words, the code in the "DO DATE FUNCTIONS HERE" is being executed regardless of whether my primary column type parameter is text OR date. It would appear that all conversion fuctions are calculated at runtime prior to running other logic. If so, this is a bad thing for me, as that means I cannot mix data types in the same report and figure it out all dynamically. Is this true? I had always thought that the date code (in the example above, the call to Year()) would not be executed unless that statement in the switch statement was true. I've had the same luck with If statements, and Choose statements, and I've even tried using custom code.
I think my whole problem relates to a misunderstanding of how the functions are processed. Can anyone shed some light?
Thanks!
Michael
How To Remove Unwanted Characters During ETL?
Jan 5, 2007Can unwanted characters (e.g. control codes) be replaced or removed in varchar fields during extraction inside DTS package?
SQL Server/SSIS 2005.
Thanks, Andrei.
Stored Procedure Being Saved In System Stored Procedures
Apr 7, 2006We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
Thanks!
How Can I Call One Or More Stored Procedures Into Perticular One Stored Proc ?
Apr 23, 2008Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
SSIS And Stored Procedures Results Stored In #Tables
Mar 26, 2008Hello
I'm start to work with SSIS.
We have a lot (many hundreds) of old (SQL Server2000) procedures on SQL 2005.
Most of the Stored Procedures ends with the following commands:
SET @SQLSTRING = 'SELECT * INTO ' + @OutputTableName + ' FROM #RESULTTABLE'
EXEC @RETVAL = sp_executeSQL @SQLSTRING
How can I use SSIS to move the complete #RESULTTABLE to Excel or to a Flat File? (e.g. as a *.csv -File)
I found a way but I think i'ts only a workaround:
1. Write the #Resulttable to DB (changed Prozedure)
2. create data flow task (ole DB Source - Data Conversion - Excel Destination)
Does anyone know a better way to transfer the #RESULTTABLE to Excel or Flat file?
Thanks for an early Answer
Chaepp
Deleting Unwanted Entries At The Subscriber .
Oct 8, 2002Hello ,
I have created a publication from SQL Server 7.0 and subscribed the publication it to one of the SQL 2000 server std. edition .
Now there are some entries in the subscription list at the subscriber which need to be deleted .
The list shows the name of the publication , the database name and the date .
I wanted to know hoe can we delete those unwanted entries. If i select the entry and right click on it , there is no delete option .
Are those entries to be deleted from one of the tables at the subscriber or the publisher ? If yes, then what is the name of the table ?
Any ideas ?
Thank you very much .
Unwanted Conversion Fails Sorting Code
Jan 13, 2005I have some code that sorts a column logically even if it contains both numbers and text. But I've found that SQL converts certain characters automatically....
Here is the code...
SELECT * FROM TABLE
order by
case when isnumeric(fieldname)=1 then
right(replicate(' ', 10 ) + convert(varchar,convert(numeric(10),fieldname)),10)
else fieldnameend --10 is the length of the field
The issue I've run across is that if my column contains the following strings(5D000,5E000,4E001) it thinks they are numeric then the THEN part of the condition causes a typecasting error....
I found out that any certain combinations of number + E or D + 0. Does anyone know a way to get around this? Try it out select isnumeric('5E0303') will return 1
How Do I Exclude Certain Unwanted Data From A Query Result
Oct 12, 2007Hi All,
We've got a basic query that pulls a list of some parts out of our inventory database:
SELECT p21_view_inv_mast.item_id, p21_view_inv_mast.item_desc, p21_view_inv_loc.gl_account_no
FROM dbo.p21_view_inv_loc p21_view_inv_loc, dbo.p21_view_inv_mast p21_view_inv_mast
WHERE p21_view_inv_loc.inv_mast_uid = p21_view_inv_mast.inv_mast_uid
This returns a lot of info over three columns: "item_id" "item_desc" and "gl_account_no"
What I want to do is remove any entries where the "gl_account_no" shows as 011500000
I am by no means a TSQL person, I mostly run the canned queries that our vendor gives us so any help with this would be greatly appreciated.
Hidden Graph At Top Of Report Causes Unwanted Whitespace
Mar 31, 2008
Hi,
I have a need to create a report that has a graph at the top and a table at the bottom. The graph at the top can optionally be made hidden because they cause problems when exported to Excel as images. However, when I set the Hidden property of the graph to true, positions of all items on the report remain absolute. Meaning of course that the table that is located half-way down the page remains half-way down the page and there is a lot of nothing on the first half where the graph used to be.
It would be desirable to have the ability to have the table move up when the graph is not visible, however it obviously doesn't do it automatically and also refuses me the ability to change the position with an expression.
Any advice is appreciated, thank you!
Unwanted Conversion Of Non Latin ASCII Characters
Oct 27, 2006hi
we get ASCII data inserted into a SQL Server database by ODBC connection from an old UNIX system.
Example: INSERT INTO test.db VALUES ('123abc', '456ПРО')
All characters > 128 are converted to "?" automatically.
We tried to setup the database to the appropriate codepage, but we allways get "?" inserted.
MS SQL Stored Procedures Inside Another Stored Procedure
Jun 16, 2007Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
Calling Stored Procedures From Another Stored Procedure
May 8, 2008I am writing a set of store procedures (around 30), most of them require the same basic logic to get an ID, I was thinking to add this logic into an stored procedure.
The question is: Would calling an stored procedure from within an stored procedure affect performance? I mean, would it need to create a separate db connection? am I better off copying and pasting the logic into all the store procedures (in terms of performance)?
Thanks in advance
John
Calling A Stored Procedure Inside Another Stored Procedure (or Nested Stored Procedures)
Nov 1, 2007Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
SQL Server 2012 :: Remove Unwanted P/L Transaction Lines?
Aug 20, 2015I am creating a report query that returns all unreconciled P/O lines. I am near completion but I am unable to find a way to remove the reconciled records.
I have included a script to produce some sample table, data & query.
The recordset dispalys 6 rows. All reconciled Supplier Invoices are duplicated and have transaction codes 40, 50 and reconcile code of 9 (5024, 921689471).
All unreconciled only appear once and have transaction codes 40 and reconcile code of 0 (4835 & 921978016). These are the only records that I want to show.
CREATE TABLE [dbo].[Purch_Ledger](
[EPDIVI] [nvarchar](3) NULL,
[EPSUNO] [nvarchar](10) NULL,
[EPSINO] [nvarchar](24) NULL,
[EPDUDT] [numeric](8, 0) NULL,
[EPTRCD] [numeric](2, 0) NULL,
[code].....
Whatever I try I cant find a way to get rid of the unwanted records.
How To Delete Unwanted Data From Multiple Different Tables With One Single SQL Query?
Mar 18, 2008This a microsoft SQL 2000 server.
I have a DB with mutliple tables that have a column called "Date_stamp", which is used as a primary ID.
Here is my problem:
Some of tables have a bad datetime entry for the "Date_stamp". The bad entry is '2008-3-18". I need to delete this entry from every single table that has a name similary to 'Elect_Sub%Daily'.
I know how to get the user table names from the DB as follows:
SELECT name
FROM dbo.sysobjects
WHERE xtype = 'U' and name like 'Elect_Sub%Daily'
What I need to do is have a query that will basically scroll through the tables name produced by the above query and search and delete the entries that read '2008-3-18".
delete from tableName where Date_Stamp = '2008-3-18'
Reporting Services :: Strip Unwanted Characters From Parameters For SSRS Report
May 22, 2015I have a third party app that passes parameters (main dataset query) from the app to SSRS. Â Unfortunately, when the parameters are passed from the app they will contain equal signs ("=") in front of each parameter. Â For example, the parameters that may be passed to the main dataset query should be:
"HYDRO, OKO, ONEPL, TECHNI"
However, the parameters that are passed from the app, get to SSRS as:
"=HYDRO, =OKO, =ONEPL, =TECHNI"
Again, this is for the main dataset query and there may be one parameter or there may be any number of them.
Basically, I need to strip the "=" signs from the parameters. whether there is one parameter or ten.
I believe that I will need a custom function to strip the equal signs?
Only Functions And Extended Stored Procedures Can Be Executed From Within A Function. Sp_executesql Is A Extended Stored Prod
May 15, 2008i have created the folowing function but keep geting an error.
Only functions and extended stored procedures can be executed from within a function.
Why am i getting this error!
Create Function myDateAdd
(@buildd nvarchar(4), @avdate as nvarchar(25))
Returns nvarchar(25)
as
Begin
declare @ret nvarchar(25)
declare @sqlval as nvarchar(3000)
set @sqlval = 'select ''@ret'' = max(realday) from (
select top '+ @buildd +' realday from v_caltable where realday >= '''+ @avdate +''' and prod = 1 )a'
execute sp_executesql @sqlval
return @ret
end
Stored Procedures
Jun 17, 2006hi
i need to use only one stored procedure and access many tablesso how write a stored procedure for that dohelp me looking forward for a reply to the earliest i am developing web page using asp.net using c# and sqlserver as backend
looking forward for a replygayathri
Stored Procedures
Dec 15, 2006I am interested to know about stored procedures in Mssql .Can anyone please help me out.
Thanx in advance.
Help With Stored Procedures
Feb 24, 2007Hello I have two stored procedures
@ID INT
AS
SELECT (CASE WHEN NUM >= 10 THEN CAST(PAID AS FLOAT) / CAST(NUM AS FLOAT) * 100 WHEN NUM < 10 THEN 0 END) AS PER
FROM (SELECT (SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Player_id = @ID)) AS NUM,
(SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Transaction_value > 0) AND (D.Player_id = @ID)) AS PAID) AS X
and
@ID INT
AS
SELECT P.*,'/' + DBO.GETCHIPFOLDER(@ID) + '/' + ISNULL(P.PHOTO,'BLANK.GIF') AS PIC,ISNULL(
(SELECT SUM(TRANSACTION_VALUE)
FROM EVENT_DATA WHERE PLAYER_ID=@ID AND TRANSACTION_TYPE=1
GROUP BY PLAYER_ID),0) AS WINNINGS FROM PLAYERS P
undefined P
The first returns a percentage for player wins, the second gives me a photo and sums the player winnings
I would like to combine the results so I can get the percentage and wininngs in one query, in another matter all together I would like create a procedure like the first but instead of returning only one player, I would like to return the percentage for each player
Thanks in advance for any light you can shine on this.