Rename A Column And Its Data Type
Feb 27, 2008What is the way to rename a column in a table along with its datatype.
Thanks
ADVERTISEMENT
Bulk Insert Task Failing On Data Type Conversion For A Destination Column Of Type Bit
Jul 6, 2006I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
System.Data.SqlClient.SqlException: Syntax Error Converting The Varchar Value 'V' To A Column Of Data Type Int
Aug 31, 2006I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedColumn Data Type
Jun 17, 2005Hello, I would like to get the columns in a table, this works fine:SELECT syscolumns.* FROM sysobjects INNER JOIN syscolumns ON sysobjects.id = syscolumns.id WHERE sysobjects.name = 'Customers'ORDER BY syscolumns.colidHowever, is there a way to get Column_Data_Type as for example "nchar" or "varchar" instead of having it as numbers.Can anybody help ?thanks
View 7 Replies View RelatedAsking For Column Data Type
Feb 11, 2004This is an easy one , I need to know the way to check programatically for an SQL server 2000 column data type , if the result is a code , which codes are for the diferent datatypes ( varchar , text , smallint , etc ) , if you send me an url is ok.
thank you
Getting The Column's Data Type
Mar 10, 2008Hi,
I'm trying to figure out the best way to determine the data_type of a column, given the table name and column name. Once I've determined it's a charactor string I can get the length using COL_LENGTH, but I can't fund a command or procedure that will return the data type.
Thank you.
SQL Change Column Data Type
Aug 20, 2007How do I programatically change a column (say username) in a table (say tblusers) from varchar(25) to varchar(100)I am looking for something likealter tblusers set username as varchar(100) I know the above statement in nonsensical but it conveys the idea.
View 3 Replies View RelatedACCESS SQL COLUMN DATA TYPE
Oct 19, 2007HELLO
i have an sql server database, with a table an some columns.
how can i get the data type of each column and the lengh define in the database table?
Changing Column Data Type
Nov 23, 2007I want to change a column's data type from bit to int. There are data in the table already. I'm wondering if it is save/correct way to issue the following command to change the data type for that column.ALTER TABLE database_tableALTER COLUMN my_bit_column INT; Thanks.
View 1 Replies View RelatedWhich Data Type Should I Use To Store XML In A Column In DB?
Jan 29, 2006I have xml string that needs to be stored in a field in the DB. I was looking for recommendations for the data type I can use in such a scenario.
View 1 Replies View RelatedQuery Data Type Of Column In DB Table
Aug 14, 2006Hi All
I want to retrieve the data type of table column and validate the input data whether same as data type of table column before insert into database. Any suggestion?
I use asp.net + msde
Thank you.
How Do I Get Data Type Of Each Column In A Sqldatasource Control?
Sep 6, 2007Let's say... the sqldatasource has 3 columns: TableKey(int), TableName(string) and StartDate(datetime) and i'm writing a method to return the data type based on the column name.. for example: GetDataType("StartDate") should return "datetime"...what should i do?
View 2 Replies View RelatedSql Script To Change Type Of Column With Data
Sep 29, 2007I have a table say Friend which has a column "IsSingle VARCHAR(10)" and this column has values like yes or No
Now I want to change type of column IsSingle from VARCHAR to BIT, if I try to do it manaually SQL throws error that cannot convert yes to bit etc.
I know that we can write a script to do this task but i dont know how ?
Any pointers,links, suggestions will help me to start with.
Thanks for your help.
Create A Column With Binary Data Type
Feb 13, 2005Hi, in reference to the article:
http://aspnet.4guysfromrolla.com/articles/103002-1.2.aspx
I would like to know how to create a 'password' column where the data type is a binary type of length 16
This is my table:
CREATE TABLE Staff
(
Namevarchar (50)PRIMARYKEY,
Password ???? NOT NULL,
Role varchar (50)NOT NULL
)
Please review my code. Thanks in advance for helping me out here!
-Gabian-
@local Variable Column Data Type
May 23, 2001In a stored proc, can you declare a local variable that is an existing column in a table & then based on other criteria, do an order by using the local variable?
View 1 Replies View RelatedHow Do You Determine The Base Data Type Of A Column!
Sep 28, 2001Does anyone know how to determine the base datatype of a column? I've tried using sp_columns but if there are user defined datatypes on the column it returns that name instead of the base datatype. I've also tries accessing systypes and syscolumns to determine the base datatypes.
Any tips or trick would really be apreciated!
Kurt
The Value You Entered Is Not Consistent With The Data Type Of The Column.
Jun 6, 2005Hi..
I am trying to add new record to any table in my database.
But I can't.
I am tryting to add a value (1500 character) and it gives the message below
"The value you entered is not consistent with the data type of the column."
I have tried alot.
The result is my columns in my table accept maximum 900 character.
But the type of my column I try to add a value is text..
I am too angry with SQL
Please help
Set Image Data Type Column To Null?
Oct 30, 2013so i have a table with 25million rows. this table has an image data type column and i want to set this column to null. what is the most efficient way to archive my goal. SQL SERVER 2008
View 3 Replies View RelatedExcel Column Data Type Issue
Oct 27, 2006Ok, hopefully a simple issue with a simple fix. I'm importing data from an Excel spreadsheet with values such as: 10, 20, 20 Tall, 40, 40 Tall. The column imports but is treated as numeric with values 10, 20, 20, 40, 40. I set the cells to be treated as text in Excel. Any suggestions?
View 2 Replies View RelatedThe Value You Entered Is Not Consistent With The Data Type Or Length Of The Column
Feb 3, 2001I keep getting this error:
'The value you entered is not consistent with the data type or length of the column'
when trying to enter data into a feild, the feild type is char and the length
is 100 i'm entering text 3 words long but no where near a 100 characters long
any one know why this is happening?
Create Table: Want A Column With Money Data Type
Dec 14, 2007Hi all!
I want to create a table. One of the columns should be in the data type MONEY with two digits on the right side of the decimal point.
How is that possible?
Thanks a lot and greetings from vienna
landau
Can A Column Data Type Be Changed On A Replicated Table?
Dec 21, 2006On sqlserver 2000 transactional replication:
How would I best go about changing a published table's column from smallint to int? I could not find anything about it in BOL or MS.com. I do not think EM/Replication Properties allows the change. I suspect I have to run "Alter Table/Column" on the Publisher and each Subscriber the old-fashioned way. Is that true?
Thanks!
What Is The Best Practice To Change A Column's Data Type In A Very Big Table?
Dec 11, 2007
Hi All,
I am using SQL Server 2000 Enterprise Edition fully patched. Database is in Simple Recovery mode.
I need to change a column's data type from "int(4)" to "smallint(2)". I know for sure that there will be no data (precision) lost, because I know the possible values that this column could have.
My problem is that the table I am dealing with has 600,000,000 records in it. I dropped all indexes before I tried to alter the table. But still it is taking forever and filling up my 280GB disk with transaction log file.
I know that in Oracle, if I want I can turn off logging and do these kind of modifications relatively faster.
I was wondering if there is a way of disabling logging before running this alter command.
What is the best practice to handle a situation of this sort?
I appreciate your help.
Thanks in advance,
Sinan Topuz
Column, Parameter, Or Variable #1: Cannot Find Data Type SqlDatareader
Sep 28, 2006Hello Everyone,A have a Managed Stored Procedure ([Microsoft.SqlServer.SqlProcedure]). In it I would like to call a UserDefinedFunction:public static SqlInt32 IsGetSqlInt32Null(SqlDataReader dr, Int32 index) { if(dr.GetSqlValue(index) == null) return SqlInt32.Null; else return dr.GetSqlInt32(index) }I than allways get the following ErrorMessage:Column, parameter, or variable #1: Cannot find data type SqlDatareader.Is it not possibel to pass the SqlDatareader to a SqlFunction, do the reading there and return the result.My original Problem is, that datareader.GetSqlInt32(3) throws an error in case there is Null in the DB. I thought SqlInt32 would allow Null.Would appreciate any kind of help! Thanks
View 1 Replies View RelatedProblem With Converting The Nvarchar Value 'xxxxxID' To A Column Of Data Type Int.
Jan 23, 2007Hi,
I have a webform with a drop-down listbox, binded to a table and a GridView, binded to another table. My goal is when I select a value (country in my case) in the drop-down listbox to change what is shown in the GridView, based on the ID that I get from the drop-down listbox.
Here is the code (the important parts...):
Select a Country : <asp:DropDownList ID="CountriesDropDownList" runat="server" DataSourceID="SqlDataSource2" DataTextField="Name" DataValueField="CountryID" Width="220px" AutoPostBack="True">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnectionString %>"
SelectCommand="SELECT [CountryID], [Name] FROM [DS_Country]">
</asp:SqlDataSource>
<asp:GridView ID="ProvincesGridView" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataKeyNames="ProvinceID,CountryID,Name,ShortName,Description" DataSourceID="SqlDataSource1" BackColor="White" BorderColor="#E7E7FF" BorderStyle="None" BorderWidth="1px" CellPadding="3" HorizontalAlign="Left" >
<Columns>
..............................
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DineSelectConnectionString %>"
DeleteCommand="DELETE FROM DS_Province WHERE ProvinceID=@ProvinceID"
SelectCommand="SELECT ProvinceID,CountryID,Name,ShortName,Description FROM DS_Province WHERE CountryID=@ddlCountryID"
UpdateCommand="UPDATE DS_Province SET CountryID=@CountryID,Name=@Name,ShortName=@ShortName,Description=@Description WHERE ProvinceID=@ddlCountryID"
InsertCommand="INSERT INTO DS_Province (CountryID,Name,ShortName,Description) VALUES (@CountryID,@Name,@ShortName,@Description)">
<SelectParameters>
<asp:ControlParameter Name="ddlCountryID" ControlID="CountriesDropDownList" PropertyName="DataValueField" />
</SelectParameters>
</asp:SqlDataSource>
When I run it I get this error "Syntax error converting the nvarchar value 'CountryID' to a column of data type int.". If I specify the Type="Int" in <asp:ControlParameter>..</> I get "Input string was not in a correct format. "
This is supposed to be easy, but I can't make it work ! Any suggestions will be more than welcome.
Thanks.
How? : Using A Varchar, Text Data Type Variable As Valid Column Name.
Jun 2, 2008Cannot use dynamic sql in current context. So need some help regarding this.I am developing a stored procedure to update a table. Sending Column names as parameters, but not able to use them as given below.INSERT INTO Books (@Column1, @Column2) values.. Any way to execute without using dynamic sql?..Thanx.
View 1 Replies View RelatedSyntax Error Converting The Varchar Value '*' To A Column Of Data Type Int.
Oct 14, 2005Hi,
This is my complete trigger.
ALTER TRIGGER DeleteTriggerC_Middleware_Exception ON dbo.C_Middleware_Exception AFTER DELETE AS
BEGIN
DECLARE @RowCount AS VARCHAR
SET @RowCount = @@ROWCOUNT
DECLARE @TableName_Deleted AS VARCHAR(50)
DECLARE @ErrorMsg_Deleted AS VARCHAR(255)
DECLARE @AddlErrMsg_Deleted AS VARCHAR(255)
DECLARE @SubjectArea_Deleted AS VARCHAR(25)
DECLARE @CHKPT_Deleted AS VARCHAR(10)
SELECT @TableName_Deleted = table_name , @ErrorMsg_Deleted = cast(error_msg AS varchar(255)) , @AddlErrMsg_Deleted = cast(addl_error_msg AS varchar(255)),
@SubjectArea_Deleted = cast(SUBJECT_AREA AS varchar(25)), @CHKPT_Deleted = cast(CHKPT AS varchar(255))FROM DELETED
--where subject_area = 'inventory'
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE Table_Name = @TableName_Deleted
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area IS NULL and ChkPoint IS NULL
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @AddlErrMsg_Deleted like Addl_Error_Msg
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area = @SubjectArea_Deleted and ChkPoint = @CHKPT_Deleted
END
END
when i am executing the follwing query i am gettin systax error.
Query :delete from dbo.c_middleware_exception where subject_area = 'eap_room'
Error :
Server: Msg 245, Level 16, State 1, Procedure DeleteTriggerC_Middleware_Exception, Line 17
Syntax error converting the varchar value '*' to a column of data type int.
what could be the solution.
Thanks in advance
yvnsmca
Syntax Error Converting The Varchar Value '10.136.20.20' To A Column Of Data Type Int.
Jul 20, 2005I have an inventory database that Im trying to create a report out ofthe IP address are a lookup on a seperat table but I keep getting theabove error can I change the table row to something to fix this orwhat.SELECT i.INVENTORY_ITEM_ID AS [IP Address],i.HOST_NAME AS [ServerName], '' AS Flag, i.MEMO AS Comments, 'Seattle' AS City, 'Washington'AS State,CASE WHEN fv.value = 'EL EET1410' THEN '1111 3rdAve.' WHEN fv.value = 'EL WFL17' THEN '999 3rd Ave.' ELSE '' END AS[Address 1],' ' AS [Address 2], CASE WHEN fv.value = 'ELEET1410' THEN '1111' WHEN fv.value = 'EL WFL17' THEN '2222' ELSE ''END AS [Building ID],fv.VALUE AS Building, '98101' AS Zip,CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Computing FacilityLevel],CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Bldg Floor],CASE WHEN fv.value = 'EL EET1410' THEN 'C028'WHEN fv.value = 'EL WFL17' THEN 'C123' ELSE '' END AS WSPID,i.LOCATION_IN_FACILITY AS Location,i.SERIAL_NUMBER AS [Serial Number], i.ASSET_TAG AS [Asset Tag], ' ' AS[Second Asset Tag(s)],vv.VALUE AS Manufacture, mv.VALUE AS Model,'Yes' AS [Rack Mountable], rv.VALUE AS [Rack Units], 'DEV' AS [ServerEnviroment],lv.VALUE AS [Sever Type], ov.VALUE AS OS,CASE WHEN lv.value = 'Server - Intel Blade' THEN'Windows' WHEN lv.value = 'Server - Intel' THEN 'Windows' WHENlv.value = 'Server - Unix' THEN 'Unix'ELSE '' END AS [OS Type], '19x28' AS Footprint,ev.VALUE AS [Technical Owner of Server], 'N/A' AS [SLA Category],i.ON_BOARD_NIC_PORT_COUNT AS [NW Connectionquantity], 'Devlopment/Test Machine' AS [Application(s) Name],ev.VALUE AS [PW Contact],'N/A' AS RTO, 'N/A' AS RPO, 'No' AS [Is BoxClustered?], 'N/A' AS [Buisness Critical],CASE WHEN mv.value = 'Proliant DL580G1' THEN'90lbs' WHEN mv.value = 'Proliant DL360G2' THEN '85lbs' WHEN mv.value= 'Enterprise 220R' THEN'45lbs' ELSE '' END AS Weight,i.LAST_MODIFIED_DATE AS [Date of Last Install], 'No' AS [DedicatedCircuit]FROM dbo.INVENTORY_ITEM i LEFT OUTER JOINdbo.IP_TO_INVENTORY pv ON pv.IP_ADDRESS = i.INVENTORY_ITEM_IDLEFT OUTER JOINdbo.LOOKUP_VALUE lv ON lv.LOOKUP_VALUE_ID =i.DEVICE_TYPE_ID LEFT OUTER JOINdbo.LOOKUP_VALUE fv ON fv.LOOKUP_VALUE_ID =i.FACILITY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE vv ON vv.LOOKUP_VALUE_ID =i.VENDOR_ID LEFT OUTER JOINdbo.LOOKUP_VALUE mv ON mv.LOOKUP_VALUE_ID =i.MODEL_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ov ON ov.LOOKUP_VALUE_ID =i.SOFTWARE_VERSION_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ev ON ev.LOOKUP_VALUE_ID =i.CHECKED_OUT_BY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE rv ON rv.LOOKUP_VALUE_ID =i.U_HEIGHT_ID
View 2 Replies View RelatedHow To Return FTS Results From Varchar(MAX) Or Text Data Type Column?
Aug 15, 2007I am unable to get FTS working where the column to be searched is type varchar(MAX) or Text. I can get this to work if my column to be indexed is some statically assigned array size such as varchar(1000).
For instance this works, and will return all applicable results.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](1000) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
And this does not. It returns zero results what so ever.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](MAX) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
Could someone please tell me what I need to do to enable FTS on varchar(MAX) or Text columns?
Syntax Error Converting The Varchar Value To A Column Of Data Type Int
Aug 29, 2007SQL server 2000
Note : GRP_ID integer
declare @SchDnGRP VARCHAR(50)
SET @SchDnGRP='29,30'
SELECT USR_ID_ARY from AD_USR_GRP Where GRP_ID in(@SchDnGRP)
i got error like
Syntax error converting the varchar value '29,30' to a column of data type int.
if need any sql server Configuration requie, please advice to me
Syntax Error Converting The Varchar Value 'a' To A Column Of Data Type Int
Feb 10, 2006I have a table(tab1) with a column(col1) of type varchar. I insert a row with an integer value(1). And when i query the table using the sql, select col1 from tab1 where col1 = 1, it works fine.
But after i insert a varchar, say 'a' and then do the same query, i get an error message saying, "Syntax error converting the varchar value 'a' to a column of data type int.". Why is this so? Please reply.
How To Rename A Column?
Dec 1, 2004Hi,
Please let me know which query we will to rename a column in a table. I am using MS-SQL 2000.
Rename Column?
Jul 20, 2006Hi,
Is there a way to rename column like below?
ALTER TABLE table_name RENAME COLUMN from_column TO to_column
the statement above i found it from a web site, did not worked...