Render PDF With Custom Page Layout
Oct 26, 2007
Hi,
I'm using an URL to render a pdf.
- URL: //reportserver/...&Filename&...&Format=PDF (with this URL, it renders the pdf just fine)
However, if I want to pass some parameters to define the page layout, it seems this has no effect on the pdf.
--> URL: //reportserver/...&Filename&...&Format=PDF&rs: Command=Render&rc: StartPage=0&rc: PageWidth=16,54in&rc: PageHeight=11,7in
(I've added some spacing between ": P", ": C" and ": S"; otherwise it displays an emoticon)
Is there anyone who can see what the problem seems to be?
Hope to get an answer soon.
Thanks in advance...
Houssin
View 1 Replies
ADVERTISEMENT
Jul 19, 2007
my report generates most than a page, i want sent the parameters and render only the fist page , the if i need the other when the number page chage the control render the nex page, how i can do it, this because in this moment the control render all the report and the show it , and sometimes i have to wait to long time to see it
someone can help me?
View 3 Replies
View Related
Apr 29, 2008
I have a requirement that I'm having a difficult time figuring out.
I have a number of subreports, 27 of them, and I need to put them all on a single report, and have each one render on a separate page. Each of them I can be sure is a single page - how do I force a page break after each subreport?
I've been trying a number of strategies, tables, lists, rectangles, etc, with no luck...
Any thoughts or suggestions would be greatly appreciated!
Thanks,
B
View 3 Replies
View Related
May 19, 2008
I am trying to change the Page size of the layout dynamically. Does anyone know if this is possible? If so can you point me in the right direction to find resources for this.
Thank you for any help.
View 2 Replies
View Related
Apr 10, 2008
I developed a java proxy application for SSRS(Sql Server Reporting services) and able to render the reports by making webservice calls to SSRS webservices. But I am getting the data for the complete report. How can I get only a partial report( like page by page as we get in the Report Manager)? Which parameters should I pass.
As some of the reports are too big, the java application is getting memory issues and I want to limi the data that I get from SSRS.
Appreciate your suggestions.
View 6 Replies
View Related
Mar 10, 2008
Hello,
I am trying to render a Report in HTML4.0 format using ReportExecution2005 web service's Render method. When I use this, I am getting all the results in a single page. I want to display the results page by page as ReportViewer control does. Is there any way to get the total number of pages of the Result using Render() web method?
I tried using the following deviceinfo:
"<DeviceInfo><StreamRoot></StreamRoot><Toolbar>True</Toolbar><Parameters>True</Parameters><Section>0</Section><HTMLFragment>false
</HTMLFragment></DeviceInfo>";
Any help or suggestions would be appreciated.
View 7 Replies
View Related
Aug 6, 2007
Hello Microsoft or Forum Members:
This seems like a simple Microsoft Based Reporting System 101 feature...But I can not find out how to do it (among other things that seem like it should work with Microsoft rendering to Microsoft).
How do I make the SSRS 2005 Header for the Report print on each of the pages in excel once it is rendered from SSRS?
All I want is an answer by MSFT that says "YES" it can be done and how or "No" it is not currently available.
I noticed I am not the only one with this type of simple question:
(see this unanswered post)
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1281464&SiteID=1
Thank You guys!
View 9 Replies
View Related
Apr 25, 2008
Hi
I am new to SSRS
I would like to place time /date in page header
I have like '="Report Time: " & Globals!ExecutionTime'
and also page title
How can i do that
Thanks
View 6 Replies
View Related
May 25, 2006
I am having a small problem.
When I generate a report with a large amount of text data (Paragraphs) the report will not split the text between two pages.
It will move the entire text box to the next page leaving a large amount of space on the previous page.
I tried every control on the page to render this. I tried textboxes, tables, lists, rectangles, subreports, etc..
The data is stored in a SQL table using a text data type (there can be a large amount of data entered into these database.
Any help on this would be great. I like reporting services, but there are just a few bugs.
I am using Reporting Services 2000 with Service Pack 2 and Hotfix
http://support.microsoft.com/?kbid=912424 (That fixed a different PDF rendering issue) and this problem was occuring prior to this hotfix.
Thanks in advance
View 5 Replies
View Related
Aug 22, 2005
I'm having problems with what is displayed in the browser being different to what is defined in the RDL and what is exported to PDF.
View 7 Replies
View Related
Mar 27, 2007
Hello,
Is there a a way to catch general errors on ssrs and display a custom error page to the user?
The goal is that if a user try to access a report when the ssrs is down, He won't see the RS general error but a custom notice from me.
Thanks.
View 2 Replies
View Related
Mar 27, 2007
Hello,
Is there a a way to catch general errors on ssrs and display a custom error page to the user?
The goal is that if a user try to access a report when the ssrs is down, He won't see the RS general error but a custom notice from me.
Thanks.
View 6 Replies
View Related
Nov 21, 2007
I designed a report in reporting services 2005. When i look at the view layout for the report everything is aligned correctly but if i go to print preview one matrix is shifted up or down. I have tried to put the matrix inside a rectangle but the issue is still present. Does anyone know why this is happening or any suggestions on what to do to fix it.
Thanks
Scott
View 3 Replies
View Related
Feb 7, 2008
Hi,
I created one report with 5 dynamic drop down parameters. The first parameter is passed from URL and the other's parameter drop downs should get populated based on the first one. These 4 parameters default to some value which I defined.
Everything is working fine in the Report Manager but when the report is integrated in a web page I am getting some problems.
After the drop-downs are populated and the user wants to filter down by using different values in the drop down, causes the report to generate automatically and all the dropdowns are reset to default.
Have you had this problem before? Anyone can advise me how to solve this issue?
Thank you in advance!
/daniel
View 1 Replies
View Related
Mar 8, 2007
Hi,
I am creating a custom transformation component, and a custom user interface for that component.
In
my custom UI, I want to show the custom properties, and allow users to
edit these properties similar to how the advanced editor shows the
properties.
I know in my UI I need to create a "Property Grid".
In
the properties of this grid, I can select the object I want to display
data for, however, the only objects that appear are the objects that I
have already created within this UI, and not the actual component
object with the custom properties.
How do I go about getting the properties for my transformation component listed in this property grid?
I am writing in C#.
View 5 Replies
View Related
Nov 11, 2015
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies
View Related
Aug 14, 2007
Hi,
I've created a Custom Data Flow Component and added some Custom Properties.
I want the user to set the contents using an expression. I did some research and come up with the folowing:
Code Snippet
IDTSCustomProperty90 SourceTableProperty = ComponentMetaData.CustomPropertyCollection.New();
SourceTableProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
SourceTableProperty.Name = "SourceTable";
But it doesn't work, if I enter @[System:ackageName] in the field. It comes out "@[System:ackageName]" instead of the actual package name.
I'm also unable to find how I can tell the designer to show the Expression editor. I would like to see the elipses (...) next to my field.
Any help would be greatly appreciated!
Thank you
View 6 Replies
View Related
Apr 2, 2007
Hi,
I'm trying to enable Expression for a custom property in my custom data flow component.
Here is the code I wrote to declare the custom property:
public override void ProvideComponentProperties()
{
ComponentMetaData.RuntimeConnectionCollection.RemoveAll();
RemoveAllInputsOutputsAndCustomProperties();
IDTSCustomProperty90 prop = ComponentMetaData.CustomPropertyCollection.New();
prop.Name = "MyProperty";
prop.Description = "My property description";
prop.Value = string.Empty;
prop.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
...
}
In design mode, I can assign an expression to my custom property, but it get evaluated in design mode and not in runtime
Here is my expression (a file name based on a date contained in a user variable):
"DB" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + "\" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + ".VER"
@[User::varCurrentDate] is a DateTime variable and is assign to 0 at design time
So the expression is evaluated as: "DB189912189912.VER".
My package contains 2 data flow.
At runtime,
The first one is responsible to set a valid date in @[User::varCurrentDate] variable. (the date is 2007-01-15)
The second one contains my custom data flow component with my custom property that was set to an expression at design time
When my component get executed, my custom property value is still "DB189912189912.VER" and I expected "DB200701200701.VER"
Any idea ?
View 5 Replies
View Related
Nov 28, 2006
Hello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated.
I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
View 2 Replies
View Related
Aug 17, 2005
What I want to accomplish is that at design time the designer can enter a value for some custom property on my custom task and that this value is accessed at executing time.
View 10 Replies
View Related
Aug 16, 2006
I am writing a custom task that has some custom properties. I would like to parameterize these properties i.e. read from a varaible, so I can change these variables from a config file during runtime.
I read the documentation and it says if we set the ExpressionType to CPET_NOTIFY, it should work, but it does not seem to work. Not sure if I am missing anything. Can someone please help me?
This is what I did in the custom task
customProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
In the Editor of my custom task, under custom properties section, I expected a button with 3 dots, to click & pop-up so we can specify the expression or at least so it evaluates the variables if we give @[User::VaraibleName]
Any help on this will be very much appreciated.
Thanks
View 3 Replies
View Related
Jun 12, 2007
Hello,
I've just installed SQL Server 2005 Express, and RS (all with SP2). I can run reports fine for HTML, PDF, and Excel, but whenever I specify a format with "CSV" or "XML", I get the following error:
An attempt has been made to use a rendering extension that is not registered for this report serverAn attempt has been made to use a rendering extension that is not registered for this report server
I'd really like these report formats to work. I haven't modified any system configuration files.
Has anyone else seen this error?
Thanks,
Michael
View 2 Replies
View Related
Apr 14, 2008
I have made a working admin section for my website, now the problem is that I don´t know how to render the data (from sql database) which code should I use to render for instance a field called "projectName"?
View 1 Replies
View Related
Aug 15, 2007
Hi.
if I try to export my rdl file to xml from Report Viewer it's work
but if i try to render the rdl from code with format xml if i try to show the xml i get "Cannot have a DOCTYPE declaration outside of a prolog"
this occur just in some rdl's.
somebody help...
sorry about my english
View 1 Replies
View Related
Jul 1, 2007
Hi
I have Reporting Services hosted on a server which has Workgroup edition of SQL Server which does not support csv export. I would like to write a csv Renderer.
I am not sure how complex this task is likely to be.
Are there any White Papers or samples that would assist ?
Any advice to point me in the right direction would be most appreciated.
Regards
JohnJames
View 1 Replies
View Related
Oct 5, 2007
Hello All,
I have a report which throwing this error:
Cannot read the next data row for the data set ALERTSBYSERVERS. (rsErrorReadingNextDataRow) Get Online Help
Arithmetic overflow error converting expression to data type datetime
This report can be viewed on the Visual Studio, but is not rendering it on the Reporting console. Any ideas??
Mannu.
View 4 Replies
View Related
Jun 20, 2007
I have a report which uses for one of its columns, a text field that contains HTML formatting. FreeTextBox is used to enter the rich-text data and is bound to a dataset, in this type of format : <BR><B>the title</B><P>Some stuff...</P>. Needless to say, when this prints out it does not look very useful. Is there any way to embed a rich-text type field in a report?
View 1 Replies
View Related
Nov 12, 2007
Is it possible to render report to PDF using VB.NET, i google it, able to get code using c#, that I am not familliar.
Render to PDF using VB.NET is possible?
Is there anyother way todo it without using C#?
I tried this mehtod
http://myserver/ReportServer/ReportService2005.asmx?%2fReports%2fGroup&rs:Command=Render&rs:Format=PDF
If format is EXECL, it is very quick but PDF is not working, it say downloading..... nothing happen
any idea
thanks
Kal
View 2 Replies
View Related
Apr 30, 2008
I'm using visual studio 2005 with .NET 2.0 SP1.
Under a report server project, I created a table and used it to display a dataset drawn from a database (SQL Server 2005). And I set the "NoRows" property of this table to something like: "= "Customer: " & Parameters!CustomerID.Value & " does not exist in database.". I deployed the report on a report server, run it and exported to Excel. If there were no data returned, the Excel will display the non-exist message as designed. But if I export the same report again without re-run the report, the message will disappear. Looks like a bug?
View 3 Replies
View Related
May 15, 2008
I have a form that I created that groups make and model and it totals all the fields to make 1 entry on the Layout. I then am trying to get the layout to SUM those values but it does not. For example we have 2
Make, Model, Totals
CV, P2100, 50,000
CV, P2100, 52,000
CV, P2100, 48,000
CM, R3200, 50,000
CM, R3200, 53,000
CM, R3400, 20,000
CM, R3400, 22,000
As you can see above we have 2 Makes CV and CM, with Diff models.
The code i used totals the make, model, and totals for the parts.
Results look like this.
Make, Model, Total
CV, P2100, 150,000
CM, R3200, 103,000
CM, R3400, 42,0000
I tried to use the SUM function and it takes all older totals and places that at the bottom creating a Larger value than what should be posted.
the CM total should be 145,000 and the CV would be 150,000.
Here is the code I am using for this and this parts right I am just having issues with the layout not posting the correct numbers.
SELECT equip.eqpphybr, equip.kequipnum, equip.kmfg, equip.kmodel, equip.kserialnum, equipdet.glsrc, equipdet.glamt, equipdet.gldate, equipdet.action,
CASE WHEN action = 'b' THEN glamt ELSE 0000000.00 END AS RentalBilling,
CASE WHEN action = '6' THEN glamt ELSE 0000000.00 END AS Depreciation,
CASE WHEN action = 'a' THEN glamt ELSE 0000000.00 END AS Repairs, equip.eqprecdt, equipdaily.cnvf001, equipdaily.cnvf00109, equip.eqpstatus
FROM equipdet INNER JOIN equip ON equipdet.kequipnum = equip.kequipnum INNER JOIN equipdaily ON equip.kequipnum = equipdaily.kequipnum
WHERE (equipdet.gldate BETWEEN @fromdate AND @thrudate) AND (equip.eqpstatus <> 'SO')
ORDER BY equip.kmfg, equip.kmodel
__________________________________________________________________-
For the layout its looks like this with 2 groupings.
Below is the headers in same order as the =Fields
Br,EQ#, MFG, Model, S/N, ACQ Date, ACQ Cost, Book Value, Rental Billing, Depreciation, Repairs
---------------------------------------------------------------------
(This is row 1 inserted as a group with expression =Fields!kmfg.Value)
=Fields!eqpphybr.Value, =Fields!kequipnum.Value, =Fields!kmfg.Value, =Fields!kmodel.Value, =Fields!kserialnum.Value, =Fields!eqprecdt.Value, =Fields!cnvf001.Value, =Fields!cnvf00109.Value, =SUM(Fields!RentalBilling.Value), =SUM(Fields!Depreciation.Value), =SUM(Fields!Repairs.Value)
---------------------------------------------------------------------
(This row is set as a group by =Fields!Kmodel.Value)
ACQ Cost, Book Value, Rental Billing, Depreciation, Repairs
---------------------------------------------------------------------
Totals: =SUM(Fields!cnvf001.Value), =SUM(Fields!cnvf00109.Value), =SUM(Fields!RentalBilling.Value),=SUM(Fields!Depreciation.Value) / -1, =SUM(Fields!Repairs.Value)
---------------------------------------------------------------------
(I added a row from the =Fields!Kmodel.Value to get percents.)
Depreciation, Repairs
---------------------------------------------------------------------
=IIF(Sum(Fields!RentalBilling.Value)<>0,Sum(Fields!Depreciation.Value)/Sum(Fields!RentalBilling.Value),0)/-1, =IIF(Sum(Fields!RentalBilling.Value)<>0,Sum(Fields!Repairs.Value)/Sum(Fields!RentalBilling.Value),0)
View 20 Replies
View Related
Jun 1, 2007
We have a report that is printed landscape and contains a main table with values. Inside this table we also want to create a "sub-report" table based on two other criteria (charges and credits), but this data is still grouped with the main table. Here is a simple schematic of the report
XXXXXXX XXXXXXXX XXXXXXXXXX XXXXXXXXX Charges
XXXXXXXXX
XXXXXXXXX
Credits
XXXXXXXXX
XXXXXXXXX
XXXXXXX
We have placed a rectangle in the last column of the main table to accomodate two other "sub-tables": one for Charges and the other for Credits. We need to keep the heighth of each row in the main table the same (without extra white space) so we cannot move the second table for Credits below the table for charges.
I hope this makes sense and anybody with any suggestions, it is appreciated.
View 3 Replies
View Related
Jun 15, 2007
I'm developing a system in .NET to record and manage marks for classroom attendance. To enable staff to print-out the registers, I need to output the data in a printable format. My first thought on this was to use Reporting Servcices, however there are a number of caveats.
I'm using the matrix control to handle the displaying of the students with the class dates and attendance marks. After 25 columns are output this should wrap to a new page, is this possible?
When wrapping to a new page, the first 3 columns should remain the same with the other 18 being the next lot of class dates.
There needs to be 25 rows shown, regardless of whether or not there are actually 25 rows returned from the dataset.
Essentially the layout for this is strictly controlled. Is RS the correct tool for this or is there something else I can/should use?
Example register layout
NO. STUDENT ID 01/01 08/01 15/01 22/01 29/01
1 ADAM SMITH 123456 X X X X X
2 JANE WILSON 748386 X O O X X
View 25 Replies
View Related
Oct 10, 2007
Hey, guys
I have got problem of designing a report table. The table is created based on 5 field dataset output, student name, semester, unit name, unit code and exam mark. e.g.
StudentID Semeter UnitName UnitCode Mark
------------------------------------------------------------------------------------------------------------------------------------
123456 1, 2006 Database IT001 85
123456 1, 2006 XML IT002 82
123456 2, 2006 Web Development IT003 76
123456 2, 2006 ............
etc
and there is supposed to one table for one semester and the student ID and Semester must be in the first 2 rows and all the other data is column based as normal, which is like
StudentID 123456
Semester 1, 2006
------------------------------------------------------------------------
UnitName UnitCode Mark
Database ITN001 85
XML ITN002 82
StudentID 123456
Semester 2, 2006
------------------------------------------------------------------------
UnitName UnitCode Mark
Web Development ITN003 76
I only can create the table using grouping but the layout is column based.
Does anybody know how can I design the table to achieve the above table layout.
Thanks in advance.
Regards,
Jeff
View 3 Replies
View Related
