How can I repair the database (5 gb) and remove the transaction log (45 gb). Whenever I run the maintanence wizard, it corrupts the db and I have to restore the db. Whenever I try to shrink the transaction log, the query runs but it doesn't shrink it at all. Is there a manual method for either of these and if so, how?
View 1 Replies
Hi there.
I have a corrupt .sdf database sat on a SD Card but i am unable to find a way to repair it.
So far I have tried a few different methods, most of which just tell me what i already know i.e. "the database is corrupt and needs repairing!!"
I am unable to open the file in SSMS object browser (see above message) which means i cant run repair / shrink utilites.
I am also unable to add the database to a vs2005 project (again see above message) meaning again i can't run any repair utilities.
I have also tried using the compact / Repair utility in Query analyser 3.0 on my Windows Mobile 5.0 PDA but once again i am greeted with an "error reading file - Run the Repair Utility" Message.
Lastly i've tried using the SQLCEengine.repair method and, depending on whether i do it on the PDA or on a desktop pc it throws the exceptions "Error occurred reading database file - run the repair utility"(PDA) or "invalid database type" (PC)
Can anyone shed any light as to whether there is another (easier???) way of doing this or if i just have to face it that this file is lost?
Thanks
ps. the code i used for the .repair is as below:
Dim conn As SqlCeEngine
Dim strdb As String
strdb = "SD CardPathnameDatabase.sdf"
conn = New SqlCeEngine(String.Format("Data Source={0}", strdb))
If conn.Verify = False Then
conn.Repair(Nothing, RepairOption.RecoverCorruptedRows)
MsgBox("Successfully Repaired")
End If
I already did the following but still it wont delete the log file because it is not empty- DBCC SHRINKFILE('logfilename',EMPTYFILE) - DBCC SHRINKFILE('logfilename',TRUNCATEONLY)- ALTER DATABASE databasename REMOVE FILE logfilename
View 4 Replies View Relatedi would like to know it's possible to find all transaction(insert, delete,update) on a database for a day. if yes what can i do.
View 2 Replies View RelatedI started getting errors everytime i try to access my webmail(horde), my zencart and my forum so i asked my website host and they say i need to repair the SQL database. I have no idea what this means, can someone help please?
The errors are:
Horde: A fatal error has occurred
Could not connect to database for SQL SessionHandler.
Details have been logged for the administrator.
Zencart: 0 DB_ERROR_NOT_CONNECTED
in:
[db_cache table]
If you were entering information, press the BACK button in your browser and re-check the information you had entered to be sure you left no blank fields.
SMF Forum: Connection Problems
Sorry, SMF was unable to connect to the database. This may be caused by the server being busy. Please try again later.
Please help, i am totally lost!
I am backing up SQL 6.5 DB using Backup Exec 7.2 on NT 4.0 server SP4 with SQL server agent. The backup job ends in Failed status and a warning that DBname is corrupt. I then try to run DBCC Checkdb, newalloc, and checkcatalog commands to repair the DB. No further ahead yet. Are there any other commands that I can perform on the DB so that the corruption can be repaired, or verified there indeed is corruption of DB?
View 1 Replies View RelatedI'm an Access man moving towards SQL Server and I'm interested in knowing if there is a utility for my SQL Server version 7 database that is similar to Access' Compact and Repair utility? I'd like a recommendation from a guru on what Prevenatative Maintenance measures I should be running daily/weekly/monthly etc...
Thanks in advance.
dog
I want to use function "Compact and repair database" in SQL Server2000 which like function Access 2003.
How can i do ?
Thank you very much.
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies View RelatedRunning SQL 7, Standard version. I had a database marked 'suspect'. I copied the MDF and LDF files to another directory, then deleted the suspect database. I tried to create a new database and attach the MDF file to it. It did not work. Any other ideas? I have no other backups of the data. I am willing to pay for consulting over the phone if necessary.
View 1 Replies View RelatedIf we restore a database (full backup) first and continuously apply its transnational log backups, do we end up with two identical databases at page level eventually?
If so, page level repair to principle server may work as documented. I can see SAN level mirroring will give you exactly two identical databases at page level eventually at some point of time.
I can see Sybase device (in MS word file) level mirroring will give you two identical things at page level for same device.
But applying the transcriptional logs sequentially on the other servers, can SQL Server guarantee these two databases are identical at page level given there is server configuration can be different?
One of our clients gets the following error when trying to backup a database:
View 6 Replies View RelatedIs it possible to try repair a database without being attached, giving the path to the files?
I'm trying to attach a database that i recover from a disk, and i'm not able to attach, gives me an error, saying i should do a db check.
Hi all,
Long time ago, I downloaded the Northwind and pubs databases from the Microsoft website (I do not remember the details of it) and installed these two databases together into the SQL Server Management Studio Express of my PC (Microsoft Windows XP Pro). I tried to learn an example of using "User Instance" (source code was from a book) on the Northwind database located in my SQL Server Management Studio Express. I just find out that my Northwind database has the title only and no tables at all. If I click on the "+" in front of the "Northwind", I got the following error message:
Microsoft SQL Server Management Studio Express
Failed to retrieve data for this request.(Microsoft SqlServer.Express.SmoEnum)
Additional information:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from backup. (Microsoft SQL Server, Error: 5173)..
Please help and tell me how I can repair this Northwind database in my SQL Server Management Studio Express.
Scott Chang
P. S.
I deleted the name 'Northwind' in my SQL Server Management Studio Express, executed the "SQL2005DBScriptsInstnwind" program and I got the following error message: Msg 1802, Level 16, State 4, Line 1
CREATE DATABASE failed. Some file name listed could not be created. Checked related errors.
Msg 5170, Level 16, state 1, Line 1
Cannot create file 'c:Program FilesMicrosoft SQL ServerMSSQL.1DATAorthwindorthwind.ldf' because it already exist. Change the file path or the file name, and retry the operation.
Msg 15100, Level 16, State 1, Procedure sp_dboption, Line 64
The database 'Northwind' does not exist. Use sp_helpdb to show available database.
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'Northwind'. No entry found with that name. Make sure that name is entered correctly
First, this is not my code.
This one is weird and I am missing something fundamental on this one. A developer was getting a timeout with this...
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE FROM INVOICECLAIMMAPPING WHERE CLMRECDID IN (SELECT DISTINCT CLMRECDID FROM CLAIMSRECEIVED WHERE SUBMITTERTRANID = @SUBMITTERTRANID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsreceivedPayorServices where ClmRecdPyID in (SELECT ClmRecdPyID
FROM ClaimsReceivedPayors
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedPayors WHERE ClmRecdid in (SELECT ClmRecdID
FROM ClaimsReceived
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
I applied a couple of indices and got ride of the uncorrelated subqueries
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE INVOICECLAIMMAPPING
FROM INVOICECLAIMMAPPING
JOIN CLAIMSRECEIVED
ON INVOICECLAIMMAPPING.CLMRECDID = CLAIMSRECEIVED.CLMRECDID
WHERE CLAIMSRECEIVED.SUBMITTERTRANID = @SUBMITTERTRANID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment
WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsreceivedPayorServices
FROM ClaimsreceivedPayorServices
JOIN ClaimsReceivedPayors
ON ClaimsreceivedPayorServices.ClmRecdPyID = ClaimsReceivedPayors.ClmRecPyID
WHERE ClaimsReceivedPayors.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsReceivedPayors
FROM ClaimsReceivedPayors
JOIN ClaimsReceived
ON ClaimsReceivedPayors.ClmRecdid = ClaimsReceived.ClmRecdid
WHERE ClaimsReceived.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
Suddenly this constraint was being violated with the change
ALTER TABLE [dbo].[ClaimsReceivedPayorServices] ADD CONSTRAINT [FK_ClaimsReceivedPayorServices_CLAIMSRECEIVEDPAYOR S] FOREIGN KEY
(
[ClmRecdPyID]
) REFERENCES [CLAIMSRECEIVEDPAYORS] (
[CLMRECPYID]
)
Is the delete on ClaimsReceivedPayors starting before the delete on ClaimsreceivedPayorServices finishes? If so why would it matter between the join and subquery? This one is making me depressed because I can not explain it.
Hi,
Please Help, I am very desparate for a solution to this one.
I have an error appearing
"Error 25115 Wrong Page (potential database corruption). Try Running the Repair Utility."
I have SQL Server Enterprise set up with Merge replication, it is being used to Sync with Windows Mobile Devices as the subscribers.
All the Windows Mobile subscribers have been synchronising fine up until recently, when 1 of the Subscribing Windows Mobile devices received this error.
The day after, another device Synchronised fine the first time (note that the Synchronisation was a long one and the SDF grew in size dramatically while the synchronisation occured, but the Sync worked fine and the SDF dropped back to its initial size) The 2nd sync 5 mins later failed however so this Mobile device has the same error also.
Any suggestions as to the below are much appreciated
a) Why this error occurs?
b)How do you resolve this error?
c)What is the Repair utility mentioned in the error, and is it of use to me?
Thanks in advance, I am very greatful for any advice.
Hi there!
I wanted to move transaction log from drive e: to drive d:.
I run DBCC SHRINKFILE(finance_log, EMPTYFILE) before ALTER DATABASE.
Two weeks are gone and now old file is empty and I'm trying to delete it running:
ALTER DATABASE FINANSE
REMOVE FILE Finance_log
GO
and I'm getting error message:
Server: Msg 5020, Level 16, State 1, Line 2
The primary data or log file cannot be removed from a database.
Have you experienced with this problem? How to resolve it?
Thank you,
Elena.
I currently have 3 transaction logs (TR1, TR2, TR3)setup for a database (DB1). The space allocated for TR1 is much to high at 800 MG and TR2 and TR3 are 80 MG apiece. I would like to migrate the data to on of the smaller transaction log files. What is the best way to do this?
On a test system I tried backing up both the database and the transaction log and then executing 'DBCC SHRINKFILE (TR1, emptyfile)'. I thought this would purge inactive transactions from TR1 and mark it as no longer being allowed to take active transactions. When I try to perform a 'ALTER DATABASE DB1 REMOVE FILE TR1' I receive the message the Primary data or log file cannot be removed from the database. So I'm wondering if the file is empty and how I designate another TR file as being the primary log file?
Thank you for any help you can provide!
Hello All,
I have big problem with the transaction log of my database, because the size of it on my server was bigger than 7GB. So how can I reduce it?
Thanks in advance
--kneel
Hello
We have a SQL Server 2000 database with 2 transaction log files.
The 2nd file was created when we were running out of disk space and the person creating it was not familiar with the dbcc shrink command.
I now want to get rid of the 2nd log file. I ran the following steps with no success:
DBCC SHRINKFILE ('Log_file', EMPTYFILE )
--Message: Cannot shrink log file 3 (log_file) because all logical log files are in use.
ALTER DATABASE db1 REMOVE FILE 'Log_file'
--Message: The file 'Log_file' cannot be removed because it is not empty.
There are no users or open transactions in the database. I have also tried sp_detach_db and sp_attach_single_file_db but that does not work either as the database attaches both the transaction logs back.
Please advise.
Thanks
Nina
Question: (SQL Server 2000) Can I arbitrarily delete a transaction logfile in either bulk or full with a cron job and still be able torestore a backup? Or are the log and the .bak enmeshed to the extentthat this not do-able?Details: I need to exclude a file group from a backup as it's staticdata and replicated on a remote server. In order to do this I cannotuse a simple recovery model which I currently use; at least in the GUIthe exclude filegroup option is grayed-out. So it appears I need to useeither bulk or full backups although I only need the functionality ofthe simple model.Is there another way to delete/truncate this transaction log withoutmaking a backup? Or can I just schedule backup through the day tohandle this issue?Obviously I am not a DBA but still need to solve this problem.Thanks,Phil
View 1 Replies View RelatedI am using Master Data Service for couple of months now. I can load, update, merge and soft delete data in MDS. Occasionally we even have to hard delete data from MDS. If we keep on soft deleting records in a MDS table eventually there will be huge number of soft deleted records. Is there an easy way to hard delete all the soft deleted records from all MDS tables in a specific Model.
View 18 Replies View RelatedHow to repair a corrupted OLAP database?
View 2 Replies View Related
Hi,we are executing the following query in a stored procedure using snapshot isolation level:DELETE FROM tBackgroundProcessProgressReportFROM tBackgroundProcessProgressReport LEFT OUTER JOIN tBackgroundProcess ON
tBackgroundProcess.BackgroundProcessProgressReportID =
tBackgroundProcessProgressReport.BackgroundProcessProgressReportID LEFT
OUTER JOIN tBackgroundProcessProgressReportItem ON
tBackgroundProcessProgressReport.BackgroundProcessProgressReportID =
tBackgroundProcessProgressReportItem.BackgroundProcessProgressReportIDWHERE (tBackgroundProcess.BackgroundProcessID IS NULL) AND (tBackgroundProcessProgressReportItem.BackgroundProcessProgressReportItemID IS NULL)The query should delete records from tBackgroundProcessProgressReport which are not connected with the other two tables.However, for some reasone we get the following exception:System.Data.SqlClient.SqlException:
Snapshot isolation transaction aborted due to update conflict. You
cannot use snapshot isolation to access table 'dbo.tBackgroundProcess'
directly or indirectly in database 'RHSS_PRD_PT_Engine' to update,
delete, or insert the row that has been modified or deleted by another
transaction. Retry the transaction or change the isolation level for
the update/delete statement.The exception specifies that we are
not allowed to update/delete/insert records in tBackgroundProcess, but
the query indeed deletes records from tBackgroundProcessProgressReport,
not from the table in the exception.Is the exception raised because of the join?Has someone encountered this issue before?Thanks,Yani
I have looked at the membership and roles stored procs from Microsoft and noticed that most of them are wrapped into a transaction. Ok some of the stored procs updated more than one table in which case it makes sense to wrap the code into a transaction. Our stored procs are a little simpler and insert, update or delete only one table for the most part. My question is: What is good practice, should I wrap my stored procs in transactions or because I am only updating one table leave it the way it is, see sample below: Please advise, newbie
ALTER PROCEDURE [dbo].[syl_Category_Insert] @CategoryName nvarchar(64), @LanguageID int
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
BEGIN TRYINSERT INTO [syl_Categories]
VALUES(
@CategoryName,
@LanguageID)
SELECT SCOPE_IDENTITY() AS [CategoryID]
RETURNEND TRY
BEGIN CATCH
--Execute LogError_Insert SP EXECUTE [dbo].[syl_LogError_Insert];
--Being in a Catch Block indicates failure.
--Force RETURN to -1 for consistency (other return values are generated, such as -6).RETURN -1
END CATCH
END
I have looked at the membership and roles stored procs from Microsoft and noticed that most of them are wrapped into a transaction. Ok some of the stored procs updated more than one table in which case it makes sense to wrap the code into a transaction. Our stored procs are a little simpler and insert, update or delete only one table for the most part. My question is: What is good practice, should I wrap my stored procs in transactions or because I am only updating one table leave it the way it is, see sample below: Please advise, newbie
ALTER PROCEDURE [dbo].[syl_Category_Insert]
@CategoryName nvarchar(64), @LanguageID int
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
BEGIN TRY
INSERT INTO [syl_Categories]
VALUES(
@CategoryName,
@LanguageID)
SELECT SCOPE_IDENTITY() AS [CategoryID]
RETURN
END TRY
BEGIN CATCH
--Execute LogError_Insert SP
EXECUTE [dbo].[syl_LogError_Insert];
--Being in a Catch Block indicates failure.
--Force RETURN to -1 for consistency (other return values are generated, such as -6).
RETURN -1
END CATCH
END
Currently we has a database of size about 300G. Because our backup system failed some time past we were left with a transaction log file which grew to about 160G. However our backups are working again and everything is working fine. My understanding is that now the transaction log file is practically empty but the capacity remains at 160G.
When you delete records the deleted transactions are going to get logged to the transaction file. My understanding is when a backup is done these transactions get discarded out of the transaction file.
could I make use of this relatively large transaction file and start deleting transactions without out actually adding to the transaction file size.
The plan is to delete records from logging tables that are not referenced to by any other table without this increasing the transaction log file.For example over a period of a few weeks we can delete a chunk of records from a table. Then after it has completed a backup we can delete another chunk of records out of this table until we have got the table down to the records that we now need.Will this work?
Hi everbody,
I ran the dbcc checkdb command .
The following errors were found:
[Microsoft][ODBC SQL Server Driver][SQL Server]Object ID 501576825, index ID 0: Page (1:894606) could not be processed. See other errors for details.
[Microsoft][ODBC SQL Server Driver][SQL Server]Table Corrupt: Object ID 501576825, index ID 0, page (1:894606), row 57. Test (!(hdr->r_tagA & (VERSION_MASK | RECTAG_RESV_A | RECTAG_RESV_B))) failed. Values are 112 and 193.
[Microsoft][ODBC SQL Server Driver][SQL Server] The repair level on the DBCC statement caused this repair to be bypassed.
[Microsoft][ODBC SQL Server Driver][SQL Server] The repair level on the DBCC statement caused this repair to be bypassed.
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 2 consistency errors in table 'MsgDateDetail' (object ID 501576825).
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 2 consistency errors in database 'Test'.
[Microsoft][ODBC SQL Server Driver][SQL Server]repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (Test repair_fast).
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
** Execution Time: 3 hrs, 10 mins, 30 secs **
How can i fix these errors.This is production server. This error reported last saturday. I don't have old backup also. everday overwriting the backup.
Please any body help me.
Hi,I just deleted about 1 million records from a SQL Server 2000 database. Iaccess it using Access 2000.I have Compact and Repair available in the adp under Tools. Should I do thatfrom Access? Will it not mess anything up?Thanks!J~
View 2 Replies View RelatedI have schedule DTS to import every day few tables. It had been workinggreat and had no problem. All of a sudden I started getting this error.ERROR AT DESTINATION FOR ROW NUMBER 100. ERROR ENCOUNTERED SO FAR IN THETASK. 1 UNIDENTIFIED ERROR.Thanks.
View 2 Replies View RelatedI have inherited a poorly administered/maintained database thatcontains the following error:"I/O error (torn page) detected during read at offset 0x000018ee23e000in file 'F:Program FilesISSRealSecure SiteProtectorSiteDatabaseDataRealSecureDB.mdf"I do not have database backups and so therefore cannot restore fromthem. I want to move the database to a new platform and somehowrepair the torn page. Is this possible?
View 3 Replies View RelatedHi All
I am looking for repair tools for corrupted mdf and ldf files,
( These files beeing corrupted after i restore them using Easy Recovery Profissional after formatting c drive by mistake. )
Remark : one file of my 3 databases work perfectly when i use attach database.
Any Help will Be appreciated.
thanks
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow