Repeat Data Region On Each Page
May 5, 2008Hi Everyone. How could I configure data region ( table, matrix ) to be repeated on each report's page?
View 8 Replies
ADVERTISEMENT
Repeat Report Item With Data Region On Every Page - Not Working
Apr 11, 2008
I've never attempted to use the "Repeat Report Item with Data Region on Every Page " feature before. I'm trying to use it on text boxes with the data region being a matrix. I have a report that is two pages, and the text boxes are only appearing on the first page. Also, the matrix is appearing with zero space between it and the header. Any ideas?
Lindsay
Problem With Page Break In A Data Region Who's Visibility Is Conditional
Jan 9, 2008I have a report which produces invoices.
These invoices are more complex than your average ones.
The invoice is for one customer but many orders. Within the invoice, orders are grouped together by their delivery address which can be different for each order within the invoice. I throw a page for each seperate delivery account and sub-total by delivery account too. All this works fine and page breaks are all OK. However I also need a summary page at the end of the invoice showing 1 line per delivery account andf the sub-total for it, then I show a grand total.
To achieve this, I used a list control, grouping on Invoice number. within it I placed 2 tables. 1 is the main Invoice table, the 2nd is the summary table. I have a page break on a group in table 1 that controls the split on delivery account. I have a page breaks on table 2. Again this all works fine and paging is perfect.
Here's the crunch though! If the invoice only contains one delivery account, I need to suppress the summary table. This I can do BUT I still get the page throw for it, effectively giving blank pages. The page break is triggered regardless of whether the containing control is visible or not.
I'm pretty accomplished with RS and I've tried all sorts of tricks and hacks to get round it but it seems a page break is added regardless of whether the control triggering it is visible or not!
I've tried rectangles both with the table in it and outside. And with the page break on the rectangle and when that didn't work , on the table inside it.
Any one else have any ideas on this.
Cheers
Chris
Multipage Report Repeat Header Not Showing Data From Page 2 Onwards
Mar 13, 2008
I am using reportitem to show the data in the header from a table cell.i see the values just on the first page, from second page onwards reportitems not showing the values at all.
I am getting the reportitems values from a tables header cell and also made the tables header cell's property checked repeat header in all pages.
Header is appearing but the values in reportitems are not populating from page 2 onwards.
i tried / used everything including inserting group header still i don't get it towork.
please help.......................
Repeat On Each Page
Jun 26, 2007After finally overcoming a number of hurdles with LisaNicholls help, I've got one hurdle left that I can't seem to get around. A system I'm updating currently outputs attendance registers in HTML which is built using some complex ASP.NET code. To make this more manageable, I decided to try and handle this output in Reporting Services.
Whilst the output looks fairly inocious and simple, in theory it's been a nightmare to implement. Because it's inteded for print output, my intention was to output the report straight to PDF, however I'm encountering an issue trying to get some of the data to "repeat" on each of the PDF pages.
If you look at the following image; http://mparter.pwp.blueyonder.co.uk/images/register_page.png, you'll see 4 main areas.
The problem areas are the red, green and blue ones.
The unmarked bottom section is a matrix which pages fine on PDF.
The TEXBOXES in the red area can possibly be worked-around by using report parameters.
The TABLES in the blue and green areas are the main problem. I can't include them in a report header workaround because there could be multiple rows per table
So, back to my question, how do I get the three marked coloured areas to repeat on each "page" of the PDF?
Repeat Charts In Every Page
Oct 21, 2006
hi guys,
In reporting services i have a table and below which i have a chart. The table has lot of values so the report spans multiple pages. I have set page breaks such that the table displays only 10 records. After all the values have been displayed in the last page the chart is displayed. I want the chart to display in each and every page of the report. It is the same chart that i want to display. How do i do this?
plz can anyone give me ideas.
Thanks,
Sai Abhiram Bandhakavi
Repeat Chart Control On Every Page
Apr 16, 2008
Hi
I added a table and chart in the body of my report (.rdl)
If the report spans multiple pages , the chart is visible only on first page.
I need to see the chart on all pages.
Please suggest
Repeat A Table Column On Every New Physical Page
Mar 22, 2007Hello,
I wonder how and if this can be achieved:
In a tabular report I have one or more columns that need to be repeated on every new physical page when printed.
Viewing the report in the ReportViewer control allows such columns to be fixed using the "FixedHeader" switch, allowing the user to conveniently scroll the reports content while always having the fixed columns in sight. This is perfect. However, when switching to the Print Layout view or when printing the report, I would like to have these fixed columns be printed on every new page that is generated at the beginning of the table printed.
E.g. I have a report that has a huge number of columns that need to be shown. When printed, the columns need at least 6 pages' width. I would be very convenient if I could repeat e.g. the first column (containing some identificational information) on every of these 6 pages. It wouldn't hurt if e.g. 7 pages would be generated because of the repeated column(s).
Any help is appreciated, thanks a lot!
Frank
Can't Get A Subreport To Start On The Correct Page Or Table Header To Repeat On Multiple Pages
May 24, 2006I am staring to lose my mind on all this "work-around" BS in trying to create a dynamic header.
I have a report with contains a table, whose first two lines are a header line in which I want to repeat on each page. Then I have about 20 detail rows of information related to the header. The 21st detail row is a merged cell that contains a subreport relating to the header item.
When printing to PDF, the detail rows consume about half the page and the subreport is anywere from half a page to several pages long. When the subreport is more than half a page, it skips the end of the first page and starts on the top of the next page, leaving the bottom half of the first page blank. No matter what I set the page breaking to, it continues this behavior. In addition, when the subreport data spans more than one page, my parent table's header row will not print to the next page even it the RepeatOnNewPage is set to true.
I am coding this way because I have found no good way of creating a dynamic header that will correctly and consistantly display data that has detail that spans more than one page.
Any thoughts on what I might be doing incorrect?
What Does Data Region Dropdown Do?
Jan 30, 2008Hi,
I have a table1 which points to a dataset1
I was wondering how I use the 'data region' dropdown selection which is present when i click the properties of a cell in table1, it always appear to be blank.
I would like to know how this works as i feel it will be useful in specifying various data regions within a table, I cant seem to find any relevant information on it, can someone tell me how this works ?
Reporting Services :: Repeat Line On Each Page Of Report On PDF While Using 2 Columns On Report
Jul 20, 2015I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 Replies View RelatedI Need To Pass Data Entered /created On The First Page To The Next Page And Populate The Next Page With Some Data From The Fir
Nov 28, 2006Hello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated.
I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
Display Hirearchy Data Using Data Region
Jul 9, 2007I am trying to display hirearchical data using data region. For eg. the first level will be a list of customer names. The second level will be a list of Invoices under each customer. The third level will be a list of product names that were sold under each invoice.
I used a list for the data region and in each hireachy, there is a textbox in each list to display the data. I am trying to associate each data region with a datatable (I will provide the logic to populate the datatable with appropiate data). I do not want the ReportViewer to interact directly with a database because this is a 3 tier design and I am using the ReportViewer in local mode. I couldn't find any example of these. Can anybody help? Also I would like to see an example of the .rdlc file in these situation. Thanks very much.
Kam
Data Region/Matrix Control Wrapping Around
Jun 6, 2007Hello All,
In my report, I have a Matrix control placed next to a table. It renders properly and displays data aligned in two controls in Visual Studio Preview. However, when I deploy to production, it wraps the matrix control below the table, in fact puts the entire matrix control underneath the table. Why such strange behavior and not in the Preview of the report but only in Production? Any ideas how to fix this?
In VS Env. Preview --> [Table][Matrix]
In Report Svr Prod --> [Table]
[Matrix]
Thanks,
Ensuring That Matrix Data Region Col Headers Are Sorted
Dec 25, 2007i ran a preview of a matrix based report whose column headers are dates. The dates seem to be displaying in a somewhat (not completely) random order from left to right. How can I ensure that they display chronologically from left to right?
View 1 Replies View RelatedHELP!!! Creating Nested Data In Repeated Region Problem
Jul 28, 2007Hi All, Would appreciate some assistance with the attached, I'm using some fairly complicated recordsets (ASP VBScript) for a property search website, I have a page where a user selects search by County this in turn takes them to a page which lists all the towns in the county and number of live properties in each, I'm using 4 recordsets for this - 3 of which list the towns (townsA2I, townsJ2R & townsS2Z) the 4th is a Property Count, examples of the recordsets are below (using townsAtoI and LiveProperties -
TownsA2I
<%
Dim TownA2I
Dim TownA2I_numRows
Set TownA2I = Server.CreateObject("ADODB.Recordset")
TownA2I.ActiveConnection = MM_recruta2_STRING
TownA2I.Source = "SELECT towncountyID, Town, County FROM dbo.easytolettowncounty WHERE Town LIKE 'A%' AND County = '" + Replace(TownA2I__MMColParam, "'", "''") + "' OR Town LIKE 'B%' AND County = '" + Replace(TownA2I__MMColParam1, "'", "''") + "' OR Town LIKE 'C%' AND County = '" + Replace(TownA2I__MMColParam2, "'", "''") + "' OR Town LIKE 'D%' AND County = '" + Replace(TownA2I__MMColParam3, "'", "''") + "' OR Town LIKE 'E%' AND County = '" + Replace(TownA2I__MMColParam4, "'", "''") + "' OR Town LIKE 'F%' AND County = '" + Replace(TownA2I__MMColParam5, "'", "''") + "' OR Town LIKE 'G%' AND County = '" + Replace(TownA2I__MMColParam6, "'", "''") + "' OR Town LIKE 'H%' AND County = '" + Replace(TownA2I__MMColParam7, "'", "''") + "' OR Town LIKE 'I%' AND County = '" + Replace(TownA2I__MMColParam8, "'", "''") + "' ORDER BY Town ASC"
TownA2I.CursorType = 0
TownA2I.CursorLocation = 2
TownA2I.LockType = 1
TownA2I.Open()
TownA2I_numRows = 0
%>
LiveProperties
<%
Dim LiveProperties
Dim LiveProperties_numRows
Sub sLivePropertyCount(vLocation)
vCount=0
Set LiveProperties = Server.CreateObject("ADODB.Recordset")
LiveProperties.ActiveConnection = MM_recruta2_STRING
LiveProperties.Source = "SELECT COUNT(PropertyID) As NumberofProperties, propertylive, propertylocation FROM dbo.easytoletproperty WHERE propertylive = 'y' AND propertylocation = " & vLocation & " GROUP BY propertylocation, propertylive"
LiveProperties.CursorType = 0
LiveProperties.CursorLocation = 2
LiveProperties.LockType = 1
LiveProperties.Open()
vCount=(LiveProperties("NumberofProperties"))
Response.write(vCount)
LiveProperties.Close()
Set LiveProperties = Nothing
end sub
LiveProperties_numRows = 0
%>
I've tried following the tutorial here http://www.webthang.co.uk/tuts/tuts_dmx/rob9/rob9.asp but when i review the page i get the following error -
"Microsoft OLE DB Provider for SQL Server error '80040e14'
Invalid column name 'Barnet'.
/PropertiesbyTown1.asp, line 338 "
Where line 338"
Where line 338 is the "LiveProperties.Open()" of the above recordset, when i try to view bindings on this recordset Dreamweaver gives me the following errors -
"Column 'dbo.easytoletproperty.propertylive' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause.
Column 'dbo.easytoletproperty.propertylocation' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause."
I would appreciate any assistance -
Is RS2005's Matrix Data Region Feature Broken, Or Subject To Certain Limitations?
Dec 25, 2007I'm consistently getting >10 minute render times in a matrix based report whose underlying query only takes 1-2 seconds to run in both RS's data tab and mgt studio. The bad render times occur in preview tab, Report Viewer and when requested from Report Manager. I believe most of the time being taken is RS's attempt to pivot and present the data.
I can run a homegrown query that pivots (with unknown number of cols) the data itself in under 4 seconds but would be concerned about mapping an unknown number of columns to a table region in RS.
The matrix I'm testing with is 67 columns across (just over 2 months of daily columns) and is supposed to be 207 rows long. There is no aggregation required by RS when it is pivoting the data because each intersection occurs at most one time in the query's result set. The number of data points actually being "bucketed" is around 13,800 values. Row headers consist of 3 columns.
RS is also cutting off the number of rows it is supposed to be showing. The number of rows cutoff seems to be 100% repeatable based on the date range chosen. RS doesnt tell me when it cuts off rows that should have been displayed. From what I can tell so far, it never cuts off columns.
The number of rows cut off seems consistent across designer's preview, report viewer and when requested thru report manager. The "run" command (exclamation icon in data tab) seems to always return the correct number of unpivoted rows, just as in mgt studio.
Are there known bugs and or limitations in RS's matrix data region feature? Are there some settings or workarounds that might make it work more to my liking?
Repeat Data In My
Sep 1, 2002Hi all,
I'm new to SQL Server 2000. There are certain record that always return a repeated data in a colomn.
I'm using a very simple sql command. Just select.
In quetry analyser it always return a repeated data.
Thanks for help
Data Starts To Repeat When I Add A Dimension.
Jun 27, 2006Hello, I€™m creating a cube with Analysis services 2000 and SQLServer 2000 that has the following structure:
The fact table has a primary key and some measures:
Fact_Table
PKFact (the primary key)
Measure 1
Measure 2
And I have some dimensions, but I€™ll put here the one of interest, this dimension has a foreign key to the fact_table, this is because it is really a €œdetail€? of the fact table, the interesting thing here is that this dimension not only has a foreign key to the fact_table, but also is a parent-child dimension:
Dimension_Table
FKFact (the foreign key to the €œPKFact€? field of the fact table)
PKId (The id of the field for the parent-child relationship)
FKParentId (the foreign key to this same table, this is, the parent of the field)
TheLevel (the data€¦)
So, if I create the cube without the Dimension_Table (of course, I have more dimensions), the cube shows the data correctly, but when I include this dimension, the data of the fact_table starts to be repeated once for each row in the dimension table (once for each row that has the relation PKFact €“ FKFact of course), Somebody knows how I can avoid this data being repeated? I€™ve tried a lot of things but none works.. Please help!!
Thanks in advance.
Odin_Dark@yahoo.com.mx
Finding Max/Min Value In A Column When Row Data Repeat
Feb 13, 2008
I have a table. In that table I have a list by student number that lists the entry dates into a particular grade. When trying to list only the first time entered, there is no unique way to identify one row from another other than the date. Is there a way to use max or min to only pull one date per student number? I have done a series of case when statements and I am able to get it down to 1 to 2 entries per student number, but I need to get it down to only 1 date per student number.
Thank you for your help
SELECT DISTINCT mx.stu_num,
CASE WHEN er.STU_NUM = ep.STU_NUM
THEN er.enterdater
ELSE CASE WHEN ea.STU_NUM = ep.STU_NUM
THEN ea.enterdatea
ELSE CASE WHEN eb.STU_NUM = ep.STU_NUM
THEN ep.enterdatep
ELSE eb.enterdateb
END
END
END AS entrydate
FROM dbo.mx AS mx LEFT OUTER JOIN
dbo.v_EntryDate9_R AS er ON mx.stu_num = er.stu_num LEFT OUTER JOIN
dbo.v_EntryDate9_P AS ep ON mx.stu_num = ep.stu_num LEFT OUTER JOIN
dbo.v_EntryDate9_A AS ea ON mx.stu_num = ea.stu_num LEFT OUTER JOIN
dbo.v_EntryDate9_B AS eb ON mx.stu_num = eb.stu_num
Power Pivot :: Dynamical Pass Parameters To Queries - Automatically Pull Required Region Data
Aug 18, 2015I pull data from Sql Server through the  query, I want to pass the region parameter to the power pivot connection query. So that I can automatically pull the required region data.  The parameter should pick the value from the excel range. And also how to control this through VBAÂ
View 4 Replies View RelatedDTS-data Driven Task, Repeat N Times If Failed
Aug 25, 2006Hi,
I have one data driven task set up in my DTS package. for some reason the connection to data source is not available when my package is scheduled to run,which fails the package.
is there a way, I can set the task to try to execute again after a couple of minutes or 5 mins, maybe a predefined number of times before it fails the package?
Thanks & Regards
Naseem
REPLACE In Derived Column Transform Causing Repeat Data In Rows That Should Be Blank
Jul 25, 2006W2k3 server, SQL 2005.
@@version = Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Standard Edition on Windows NT 5.2
(Build 3790: Service Pack 1)
I have my first SSIS package almost working, but I'm having an odd problem and can't find any information to help resolve it.
I'm importing from a flat file (csv) to an existing table (append). I've got a Derived Column transformation in the middle to do some data cleanup. It's all working except for one little problem...
One of the transformations is 'REPLACE([Column 3],"^","; ")', output to a new column. (The input file has a field that uses carets as delimiters between an unknown number of items; I'm changing that to semicolons for easier reading.) Not all rows have data in this column, some will have one item, some will have multiple items.
The REPLACE works except that it fills in repeated data for all the blank rows.
Example:
Incoming data is:
1 Smith,Jane^Jones,Jane
2 Brown,John
3
4 Adams,James^Adams,Jim
5
6 White,Debra
Data inserted into the table is:
1 Smith,Jane; Jones,Jane
2 Brown,John
3 Brown,John
4 Adams,James; Adams,Jim
5 Adams,James; Adams,Jim
6 White,Debra
I've tried to use a Conditional to skip the empty rows, but I can't get that working at all (get syntax errors no matter what I put in).
Any suggestions on how to fix this would be most appreciated!
Thank you.
Reporting Services :: Tables Are Showing Up In Same Page When There Is No Data Even After Giving Page Break Option
May 7, 2015I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies View RelatedOne Page Report - One Result Row In SQL = One Full Page Of Data
Feb 27, 2008Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
Thanks - Dave
Transact SQL :: How To Create Column (Region)
Oct 19, 2015create the column "Region" like this Picture?.
View 26 Replies View RelatedSummation Of Column Using Matrix Region
Feb 14, 2007can anyone help me about reporting services on how to sum the coloumn and put it on a textbox... but the case is like this,
Stud Name Fee Name Fee Amt. Amt Paid
John Doe Registration 1,000 1,000
Tuition Fee 5,000 3,500
1,500
Jane Bake Tuition Fee 5,000 5,000
SubTotal 16,000 11,000
when i aggregate the Fee Amt. using Sum function i get the result of 16,000 because john doe break his payment in to two(it should be 11,000 only). any help would be appreciated.
Thanks...
Transact SQL :: How To Create Column Region
Oct 14, 2015How to create column "Region" like this Picture.
View 16 Replies View RelatedInteractive Sort Causes Region To Be Hidden
Jul 31, 2007I have a report that has several headings for users to click on to toggle visibility of the data regions that the headings represent. Several of the columns in the data tables have interactive sort enabled. However, every time the user clicks the sort indicator, the region collapses again and is hidden. So, ultimately for users the interactive sort becomes a two-click action, after which they have to visually re-orient.
I tried putting the table into a rectangle and toggling visibility of the rectangle instead of the table, but it exhibited the same behavior.
How can I get it so the regions do not get hidden just because the user sorts?
Thanks,
Joel
Reporting Services :: All Record Are Displaying On One Page - How To Display Page By Page
Nov 11, 2015I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View RelatedQuestion On Particular Report Region Layout Properties
May 3, 2007Hi, all experts here,
Thanks a lot for your kind attention.
I have been trying to adjust the report regions fit into the whole report page. I could see the width and height property of the whole report page from the report property dialogue, but where can I find the width and height for the particular report region like the table? Then I could accordingly adjust the layout of both the report page and report region like table?
Hope my question is clear for your help.
With best regards,
Yours sincerely,
Internal Error: Cannot Open The Shared Memory Region
Feb 8, 2007I'm getting this error on one of the test pc's when doing a adapter.fill for a datatable.
Any ideas on how to debug this?
Thanks,
Bernie
Transact SQL :: Multiple Occurrences Of Same Product And Same Customer Filtered By Region
Nov 18, 2015I successfully used the query below to identify customers that purchased the a specific product (e.g. db1.product_id = '123') on different dates. Â Now I need to only pull the purchases from a particular region (client_cd = '593') that purchased a particular product on different dates. Â How can I do this?
select distinct T.* from db1 T1
where exists (select 1 from db1 T2 where T2.CustomerId = T1.CustomerId and T2.ProductId = T1.ProductId and T2.PurchaseDate
<> T1.PurchaseDate) and T1.ProductId = '123'<o:p></o:p>