I wirte my query as:
select mydate
from mytable
group by mydate
ordre by mydate
The datatype of mydate column is DateTime. The result is showing me same repeating groups e.g.
2/27/2008 12:00:00 AM
2/27/2008 12:00:00 AM
2/27/2008 12:00:00 AM
Please help so that my query can give me unique groups.
Regards,
Professor Corrie.
I have a new SQL 2005 (SP2) Reporting Services server to which I've just upgraded and deployed some SSRS 2000 reports.
I have a subreport that contains a matrix with two groups. The report data seems to be inexplicably repeating the data for the first row in the group for all rows in the group. Example:
ID1
ID2
DisplayData
1
1
A
1
2
B
1
3
C
2
1
A
2
2
B
2
3
C
Parent group is on ID1, child group is on ID2, report would show:
1
1
A
2
A
3
A
2
1
A
2
A
3
A
Is this a matrix bug in 2005 SP2, or do I need to do something differently? I can no longer pull a comparison version from an SSRS 2000 server to verify, but I believe it was working as expected before...
I have some data where a bit value changes over time and I want to rank it by the repeating groups, how do I write the SQL so that I get the result below?
I want to sort by create date, and every time the bit changes value we start the rank over.
If I partition by the bit field, it will just group the entire data set by the bit field.
Bit CreateDate Rank
1 3/15/2014 1
1 3/14/2014 2
0 3/9/2014 1
0 3/8/2014 2
0 3/6/2014 3
1 3/4/2014 1
0 2/28/2014 1
0 2/20/2014 2
0 2/15/2014 3
0 2/10/2014 4
I have a column which Data Type is DateTime the value is looks like 2008-01-18 16:40:39.560if I want to group by this column only compare with yyyy/mm/dd , don't care the TimeHow to write a Sql Query to fit this request?the values in Columns like below2008-01-18 16:40:39.5602008-01-18 16:40:39.5602008-01-18 16:40:39.5602008-01-18 16:40:39.5602008-01-18 17:10:02.8572008-01-18 17:10:37.3732008-01-18 17:10:37.3732008-01-18 17:11:57.1872008-01-18 17:12:22.8102008-01-18 17:13:01.4502008-01-18 17:13:37.1532008-01-18 17:13:52.4502008-01-18 17:14:10.6402008-01-18 17:14:24.6532008-01-18 17:14:41.1532008-01-18 17:15:09.3572008-01-21 14:55:18.560 thank you for your posting .
View 3 Replies View RelatedNeed to export a report into csv. The report contains a table with one group, the group header contains infomation that needs to be shown once at the start of the csv. Currently the group header repeats for every record in the detail. How can I stop the group header from repeating.
Thanks
How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies View RelatedIt is using a table to display a very large amount of data (a basic list of information) with groups. Each of the groups can span multiple pages, so the user may not realize where the grouping actually began (I am repeating the group headers). Therefore, I would like to modify the group header when it is repeated across multiple pages by simply adding the text, "(cont.)" to the header so the reader can easily see that the group started on a prior page. There does not appear to be any standard test function for this condition. Using Previous() for this case does not work. This cannot be a new issue and must have been solved; any help with this would be greatly appreciated. Sorry if this has been asked before, I did search the forum but could not find an answer to this question...
View 3 Replies View RelatedI have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.
'GroupName' column has multiple values - X,Y,Z,......
I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...
Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName' Â values:
Example:
Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of
ABC column must be ABC-Z
ie the column name of ABC (Clm ABC) Â must be dynamic as per the GroupName values (X,Y,Z....)
Page1:
GroupName          Clm ABC-X
X
Page2:
GroupName          Clm ABC-Y
Y
Page3:
GroupName          Clm ABC-Z
Z
I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....
However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,
I get the following error:
Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope
I need to get the X, Y, Z ... in each page for the column ABC.
I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...
I have several nested sub-total groups. Depending on a report parameter, I may want to suppress one of the sub-totals. This one group is not the lowest group in the hierarchy and, when I hide it, all the groups "below" it become hidden too. I only want the one group to "disappear", not any others. Is there a way to accomplish this other than creating two versions of the report?
View 1 Replies View RelatedHi,
I have a SSRS 2005 report with a table and several groupings. These groupings are made visible with toggle items.
I am trying to determine how to make the associated group headings (entered within table header) visible or not visible depending on the visibility state of the groupings.
Example: (initial state with group1 only visible)
Group1 Heading Count Sum
+Group1 999 999
(click + sign to make visible group 2)
Group1 Heading Group2 Heading Count Sum
-Group1 999 999
+Group2 888 888
etc.. for remaining groups
I've tried toggling the table header column the same way I did the group, but the group scope isn't available so I don't know what to use. (Manually putting it in causes report error.)
I don't know what visibility expression to use because I can't figure out what report item I can look at to determine the group's visibility "status" in order to make an expression.
Any ideas?
Note: I did see a similar post from sadsac, but the "answer" didn't address this.
Thanks
Hello,
I am having an issue when attempting to retrieve data from SPSS via a ADO.NETDBC Connection
using the DataReader source. What seems to be occurring is that the DataReader is reading a column that
has a length of 255 and what it is doing is taking the first 200 characters and starts repeating the
characters starting at character 201, in this way erasing any data held in positions 201 to 255.
Another way of saying this:
This statement returns data in the results but I have noticed the data is incorrect. It seems to only
be selecting the initial 200 characters of the 255 in the field. Then it starts to repeat the
first 200 characters again to complete the full selection of the 255 characters
Here is an example:
Instead of:
€œXXXXX changed my life before it got worse. It was very informative. They gave me the information. They left it up to me to ponder over it and make the decision on what I wanted to do. It informed me on what drugs do to your body and mind. I was stress€?
I end up getting:
€œXXXXX changed my life before it got worse. It was very informative. They gave me the information. They left it up to me to ponder over it and make the decision on what I wanted to do. It informed XXXXX changed my life before it got worse. It was very€?
Source Column Datatype that SSIS can see is of Unicode string [DT_WSTR] type. Also it correctly identifies
the length is 255 in both the External Column, and Output Column section.
I am using Column Groups:
And I am getting:
Note how Today is being repeated three times. What I want is Today appearing once and centered (merged cell). Is this possible?
I have a requirement to display the total of a Group after subtracting a specific value from the same Group.
Example: Say the below data is grouped on a particular columnÂ
Group Values Month
Jan-15 Feb-15 Mar-15
A 10 20 30
B 5 10 25
C 1 2 3
D 5 10 15
Total 11 22 33
Formula is : Â Sum(A+C+D)- Sum(B)
What is the best way to Group the above scenario from SSRS level and display the result as shown above. I am able to display all the values except the last total row where am displaying the complete total i.e. 21 Â 42 Â 73.
How do I dynamically subtract the values for row B which is one of the group values.
I need to calculate the last two columns (noofgrp and grpsize) No of Groups (count of Clientid) and Group Size (number of clients in each group) according to begtim and endtime. So I tried the following in the first Temp table
GrpSize= count(clientid) over (partition by begtime,endtime) else 0 end
and in the second Temp Table, I have
select
,GrpSize=sum(grpsize)
,NoofGrp=count(distinct grpsize)
From Temp1
The issue is for the date of 5/26, the begtime and endtime are not consistent. in Grp1 (group 1) all clients starts the session at 1030 and ends at 1200 (90 minutes session) except one who starts at 11 and end at 1200 (row 8). For this client since his/her endtime is the same as others, I want that client to be in the first group(Grp1). Reverse is true for the second group (Grp2). All clients begtime is 12:30 and endtime is 1400 but clientid=2 (row 9) who begtime =1230 but endtime = 1300. However, since this client begtime is the same as the rest, I wan that client to be in the second group (grp2) My partition over creates 4 groups rather than two.
Hi,
I'm inserting a datetime values into sql server 2000 from c#
SQL server table details
Table nameate_test
columnname datatype
No int
date_t DateTime
C# coding
SqlConnection connectionToDatabase = new SqlConnection("Data Source=.\SQLEXPRESS;Initial Catalog=testdb;Integrated Security=SSPI");
connectionToDatabase.Open();
DataTable dt1 = new DataTable();
dt1.Columns.Add("no",typeof(System.Int16));
dt1.Columns.Add("date_t", typeof(System.DateTime));
DataRow dr = dt1.NewRow();
dr["no"] = 1;
dr["date_t"] = DateTime.Now;
dt1.Rows.Add(dr);
for(int i=0;i<dt1.Rows.Count;i++)
{
string str=dt1.Rows["no"].ToString();
DateTime dt=(DateTime)dt1.Rows["date_t"];
string insertQuery = "insert into date_test values(" + str + ",'" + dt + "')";
SqlCommand cmd = new SqlCommand(insertQuery, connectionToDatabase);
cmd.ExecuteNonQuery();
MessageBox.Show("saved");
}
When I run the above code, data is inserted into the table
The value in the date_t column is 2007-07-09 22:10:11 000.The milliseconds value is always 000 only.I need the millisecond values also in date_t column.
Is there any conversion needed for millisecond values?
thanks,
Mani
I'm having a fight with Reporting Services at the minute when trying to compute an average at the row group level for a value summed in a column group.I have the following column groups:
Year
Month
Date
And the following row groups:
Region
Product
SubType (hidden, data at the date level is summed to Product)
At the moment I'm computing the average for SubType for each Date at the Product level (giving a decimal value), so for each day I end up with a nice average, that works. However I am unable to average that average over the whole Year for a Product. The issue being that I'm trying to combine Row Groups (Product) and Column Groups (Date/Year)
Is there any way to give Title to matrix row and column groups?
I know If i have only one row i can give title in the textbox provided at the top of the Rows group area. But i have more than one row and group and more than one column group. i want to give title to all of them.
Without the title the report looks incomplete
Is there any solution for this problem?
Thanks
Rohit
here is problem with datetime data type
when taking
group by createdate
that is in 8/8/2007 12:00:00 AM format
I dont want group for time 12:00:00 AM only group by for
date 8/8/2007 which format is mm/dd/yyyy
how can I do
Hi all,
I have a problem with my query which is suppose to select count posts group by the date, the query works but doesnt return the count as i want, i think the problem that the datetime column contains also Time in hours which ofcourse isnt same in all rows in same day, so i dont know what to do, Here's my Query:
SELECT PostID, Date, COUNT(Date) AS 'TotalPosts' FROM Posts GROUP BY PostID, Date
Thank you for help
I have one matrix with multiple row & column groups which is not looking nice.
See the below image. The reason for having a Matrix is they can create any no of Tests.
In the above image i have two row groups Test Type and Test Date and column groups as TestDesc and my required format is .
Is it possible to do custom sort for a Column Group?
i.e. if the columns are coming out as A Â B Â C, is it possible to change it B Â C Â A Â (or anything else).Â
How to count the column group values and how to print the counts on every column for column group.
I used below expression to get the total column group count.
=CountDistinct(Fields!MMU.Value, "DataSet3")
I have a matrix table with row groups of a date and addresses and also a column group which produces 3 columns and values with in these column.I have a "Total" column based on a Count of the column groups which gives a number.How do you hide all rows where the "Total" column is less then 1? There will be results which still needs the date and addresses groups.
View 2 Replies View RelatedI have Table Like this
t_id w_id t_codew_name
358553680A1100EVM Method Project
358563680A1110EVM Method Project
358453684A1000Basic
358463684A1010Basic
358473685A1020Detail
[Code] ....
i dont't know how to select row with max column value group by another column. I have T-SQL
CREATE PROC GET_USER AS
BEGIN
SELECT T.USER_ID ,MAX(T.START_DATE) AS [Max First Start Date] ,
MAX(T.[Second Start Date]) AS [Max Second Start Date],
T.PC_GRADE,T.FULL_NAME,T.COST_CENTER,T.TYPE_PERSON_NAME,T.TRANSACTION_NAME,T.DEPARTMENT_NAME ,T.BU_NAME,T.BRANCH_NAME,T.POSITION_NAME
FROM (
[code]....
Hi All,I faced this strange problem with sql server. I have datetime column and storing value from asp.net. If the user doesnt enter any date, then we dont want any value to be stored in the database. But when we checked SQL Server, it default takes this value "01/01/1900". When users clicks on edit button, this value is fetched from database and stored in front end. I dont want this value to be stored in database if i didnt provide value. But in 1 particular page, there are 5 different date columns. I am not sure about how to go ahead. I tried the following way, but again ended up with same problem.insert into tablename.......values (...., txtFromDate.text, txtToDate.text,....). Since value is not there, '' is sent to database and above said value is stored. i want NULL to be stored in teh database when user didnt specify any value.i didnt encounter this problem in Oracle.appreciate your reply.
View 9 Replies View Relatedhi, i was wondering how to set default value in the datetime column of the database so that it will enter current date and time if one is not provided when a row is populated. is there a store procedure to do this? or built-in function?
mp
Hi Guys,
I have to take only time from DateTime column filed value.
Is there any function in SQL Server which will give us time only.
Thanks,
Rau
I've got have a populated table and I want to convert a datetime column so it lists the date only (without the time component)
I tried to run this as a script, but returns an error:
update <table>
where <column>=convert(datetime,convert(char10),<column>,101))
When I run only this part, it does strip the date of the time component but it becomes a string, and I need this field stored as a datetime field:
convert(char(10),hire_date,101)
I'd appreciate any suggestions :)
I'm trying to update a datetime column from another datetime column. However, I just want the date transferred to the new column without the time. Any ideas? Thanks for your help.
View 6 Replies View RelatedI have column that hold datetime , i want to split the column into many columns ex:
column --> 01/01/2007 00:00:00
i want tp split to day month year hour minute second
In SQL server I have the column doTableDate set a Datetime.I need extract all rows in on date range and I think use to syntax `Between And` If try this version of query I have in output 889 rows all with date 2014-01-03... but I have other records with date 2014-01-04 in column doTableData...
SELECT
*
FROM
doTable
WHERE
doTableDate BETWEEN CONVERT (
datetime,
[code]....
hi ppls..
we have sql server 2000 EM. we received daily xml files and we insert into our database.there is one column Date_T having data type datetime.till date we recieved this records from xml as '03/23/2004 12:23:34:956' but due to some duplicate isssue we now want to modified this column to recieve as milliseconds like '03/23/2004 12:23:34:956232' now my point is wheather sql server handle this kind of milliseconds..please help me out as early as possible..
T.I.A
Papillon