I'm using RS2000 SP2 and am getting an issue when exporting to PDF. If I have a table that spans more than one page and I set the RepeatHeaderOnNewPage to True, then on occasion the table header will be displayed on top of the first few rows of data. It does not happen on all the pages or all the time and I can not find any information on this issue. Has anyone come across this before and solved it?
View 2 RepliesI have the option for repeating table headers for every page turn on as I would like the table headers repeated on every page. In the HTML report view, this works fine, however when the report is exported to pdf (a total of 80 some pages), when there is a table that contains a lot of data, the table headers are not displayed. I know this could be because the table includes a subreport and sometimes the subreport runs more than one page, but shouldn't the table header still be diplayed on the new page?
Is there something else that I need to check or should I move the table/column header information somplace else?
Thanks for any information.
I used ReportItems!textbox4.Value for displaying a data field in the header and footer.
But it is not getting repeated in the subsequent pages...
It is getting displayed only in the first page...
Kindly provide me with a solution to get it repeated in all the pages asap!!!........
Regards,
Aravind RJ
I achieved to get Fixed number of records per page ....but headers are not repeating in every page.... Is it possible to repeat headers on each page and fixed number of records per page please give me navigation.
View 3 Replies View RelatedIt is using a table to display a very large amount of data (a basic list of information) with groups. Each of the groups can span multiple pages, so the user may not realize where the grouping actually began (I am repeating the group headers). Therefore, I would like to modify the group header when it is repeated across multiple pages by simply adding the text, "(cont.)" to the header so the reader can easily see that the group started on a prior page. There does not appear to be any standard test function for this condition. Using Previous() for this case does not work. This cannot be a new issue and must have been solved; any help with this would be greatly appreciated. Sorry if this has been asked before, I did search the forum but could not find an answer to this question...
View 3 Replies View RelatedI have created a new report & add a table to it. When I select "Tablix Properties" and check on Columns Headers -> "Repeat Cheader columns on each page" the header columns do not repeat on each page. I also tried "Repeat header rows on each page". "Add page break before" seems to work ok. I am using VS 2008 9.0.30729.1 SP..I also tried deploying but it still does not work on the deployed version.
View 69 Replies View Relatedi have 2 tables (both containing the same column names/datatypes), say table1 and table2.. table1 is the most recent, but some rows were deleted on accident.. table2 was a backup that has all the data we need, but some of it is old, so what i want to do is overwrrite the rows in table 2 that also exist in table 1 with the table 1 rows, but the rows in table 2 that do not exist in table one, leave those as is.. both tables have a primary key, user_id.
any ideas on how i could do this easily?
thanks
Task:
To insert entries into a table. The table has a primary key based on a field 'ID'. When inserting into the destination table, I want to make sure that the new entry will overwrite the old entry.
What's the quickest/cleaniest way to do this ?
thanks,
Clayton
I am tring to figure out how to simplify the process of populating a database created by an application with the same database, only with data already in it. So far i have created a backup of the database and used that backup file with SQL server management express to overwrite the existing database with that backup file on a new computer so the program will have data when initally installed for Demonstration purposes. I was hoping there was an executable script that i could use, so that when someone wants a demonstration of our product, they can see its options and functionallity with data available. Maby i am going about this the wrong way, i need to know if there is a way that when our program is installed an executable can simply be run to populate our database with a backup of our sample database. Any imput would be helpful.
Thanks.
Isaias
Hi everybody!
I've got this little problem.
I need to insert data from a table to another table.
The scenario looks as follows:
I've got 'Company' table (no duplicated records there) and 'Contacts' table (one to many relation: for one company there can be more than one contact).
The following statement retrieves the data but it shows me everything, including all contacts and therefore I get duplicating values, e.g. company name.
Is there any way of changing the following query so it works?
INSERT Projects(
CompanyID,
ContactID,
CustomerName,
EntryTime,
SetupFee,
ForecastRevValue06_07,
ClosureProbabilityID,
ExpectedClosingDate,
TechnologyID,
Service_ProvidedID,
Dropped,
AgreementTerm,
AgreementTermDisplayOnly,
ForecastStartDate,
ForecastEndDate,
LongTerm,
UserID
)
SELECT Distinct
CI.CompanyID,
CC.ContactID,
--CC.FirstName + ' ' +CC.LastName,
getDate(),
0,
0,
5,
DateAdd(month,2,getDate()),
2,
1,
0,
2,
'2 month(s)',
DateAdd(month,2,getDate()),
DateAdd(month,4,getDate()),
0,
2
FROM
CompanyInfo CI
left outer JOIN CompanyContacts CC ON
CC.CompanyID = CI.CompanyID
Kind Regards
Hi
Pulled all my hair out now, can someone please offer some help before I go totally mad...
I have no page header, this is all in the body. I have a List with account number and job number in it at the top, called list1. In list1 I have list2, with the job details, basically a list of people who attended the job. The fields in list2 are textboxes, they're not in a table.
EG:
Acc No: 12345
Job No: 54321
Name
Fred Bloggs
Joe Bloggs
Etc
When my list2 of names goes over 1 page, I want to repeat the account number and job number on each subsequent page. In my real report I actually have 10 fields I want to repeat.
I then want to be able to export this report to a PDF.
I can't put the header in the page header and RepeatWith doesn't work when exporting to PDF, or at all depending on what mood it's in.
Does anyone have a workaround for this please?
Cheers
Hi,
I have a matrix which displays like this
Title1 A Book
Another Book
Title2 Yet another book
My Book
How can I display it like this:
Title1 A Book
Title1 Another Book
Title2 Yet another book
Title2 My Book
So that when I export this to excel I can sort and filter data easier. Thanks very much.
I have run into a strange issue that I believe is a SQL Reporting Services issue.
I have a report laid out in landscape setting that has 4 columns of text. Two of the columns are sub-reports (due to the complexity and size, we did not flatten out the data in the stored procedure) and two of the columns are regular fields.
The 2 columns of regular fields are smaller, and normally only grow to about 1/2 the height of he page. One of the two sub-reports contains large amounts of text, and at time grows larger than the height of the page.
When the sub-report grows larger than the current page, it correctly starts up on the next page. But the 2 fields of data from the main dataset (not the sub-report columns) repeat themselves on the next page as well.
What is even more strange is the 2 fields of data from the main dataset only repeat data to grow vertically as far as the sub-report needs to grow. So if there is more data in either of these 2 fields than is needed for the sub-report to grow on the 2nd page, it will cut off the data in both of these fields.
I have tried placing the information in a group header. Turned the "Repeat on new page" both True and False, Took away the table header and footer, forced a page break after each group, tried using the "Hide Duplicates" property on the field within the details section, and nothing has seemed to fix the issue.
If anyone has run into this and found a work around, let me know.
Thank you,
T.J.
Can someone tell me why my stored procedure is repeating the Name in the same column?
Here's my stored procedure and output:
select distinct libraryrequest.loanrequestID, titles.title, requestors.fname + ' ' + requestors.lname as [Name],
Cast(DATEPART(m, libraryrequest.requestDate) as Varchar(5)) + '/' + Cast(DATEPART(d, libraryrequest.requestDate) as Varchar(5)) + '/' + Cast(DATEPART(yy, libraryrequest.RequestDate) as Varchar(5)) as RequestDate,
Cast(DATEPART(m, libraryrequest.shipdate) as Varchar(5)) + '/' + Cast(DATEPART(d, libraryrequest.shipdate) as Varchar(5)) + '/' + Cast(DATEPART(yy, libraryrequest.shipdate) as Varchar(5)) as ShipDate
from LibraryRequest
join requestors on requestors.requestorid=libraryrequest.requestoridjoin titles on titles.titleid = requestors.titleidwhere shipdate is not null
Output:
ID Title Name Request Date Ship Date
29 Heads, You Win Brenda Smith 1/18/2008 1/18/200835 Still More Games Brenda Smith 1/22/2008 1/22/200851 The Key to.. Brenda Smith Brenda Smith 1/29/2008 1/29/200852 PASSION... Brenda Smith Brenda Smith 1/29/2008 1/29/200853 LEADERSHIP Brenda Smith Brenda Smith 1/29/2008 1/29/2008
Going crazy ugh...
I am querying several tables and piping the output to an Excel spreadsheet.
Several (not all) columns contain repeating data that I'd prefer not to include on the output. I only want the first row in the set to have that data. Is there a way in the query to do this under SQL 2005?
As an example, my query results are as follows (soory if it does not show correctly):
OWNERBARN ROUTE DESCVEHDIST CASE
BARBAR TRACKING #70328VEH 32832869.941393
BARBAR TRACKING #70328VEH 32832869.941393
BARBAR TRACKING #70328VEH 32832869.941393
DAXDAX TRACKING #9398VEH 39839834.942471
DAXDAX TRACKING #9398VEH 39839834.942471
DAXDAX TRACKING #9398VEH 39839834.942471
TAXTAX TRACKING #2407 40754.391002
TAXTAX TRACKING #2407 40754.391002
TAXTAX TRACKING #2407 40754.391002
I only want the output to be:
OWNERBARN ROUTE DESCVEHDIST CASE
BARBAR TRACKING #70328VEH 32832869.941393
DAXDAX TRACKING #9398VEH 39839834.942471
TAXTAX TRACKING #2407 40754.391002
Thanks,
Walt
I am trying to write a report that displays a hierarchy such as:Director, Manager, EmployeeI want to suppress the repeating Director, Manager for the employees.This is my code:sSQL = "SELECT FY99Info.MDName, FY99Info.MgrName, FY99Info.firstname,FY99Info.lastname, FY99Info.gradeFROM FY99InfoWHERE left(FY99Info.orgcode,5) = '" & left(session("MOrg"),5) & "' andFY99Info.mgmtlevel < 4ORDER by FY99Info.MDName, FY99Info.orgcode, FY99Info.mgmtlevel desc "This is the SQL table layout (FY99Info).Emp#OrgDirectorManagerEmployeeMgmtlevel110336088Brian SmithMichael SmartBill Mitchell0210336088Brian SmithMichael SmartHeidi Rainey0310336088Brian SmithMichael SmartPonita Asnor2410336088Brian SmithMichael SmartMarcus Jones0510607655Rick DoeGlenn ThomasHelen Kelley0610607655Rick DoeGlenn ThomasGaston Knight2710607655Rick DoeHelen BlackPrentis Parker0810607655Rick DoeHelen BlackBillie Spike0910739900Jason SmartTim SnowJoe Monty31010739900Jason SmartTim SnowRandi Bull31110739900Jason SmartTim SnowMisty Wonton2This is how I want it to display on the reportMDManagerEmployeeBrian SmithMichael SmartBill MitchellHeidi RaineyPonita AsnorMarcus JonesRick DoeGlenn ThomasHelen KelleyGaston KnightHelen BlackPrentis ParkerBillie SpikeJason SmartTim SnowJoe MontyRandi BullMisty Wonton
View 2 Replies View RelatedHopefully this makes sense, not sure what to even begin researching...
I'm trying to optimize all facets of this process, as it will take over the resources on my server if not done efficiently.
I have CSV files containing INTs that I need to upsert (match to an existing/earlier imported array or create a new record set) millions of times a day. To be clear, this data is a small subset of the actual import, this arrays contents are not the main data of the process, and the value of the entire array is meant to be related to higher level tables.
The contents of the CSV array are 99.9+% repeating, meaning they will very often share the exact same contents as a a previously imported array. A rough guess is there are 20k combinations existing, and less than 1k new per month, and will range from 6 cols x 15 rows to 6 cols x 50 rows.
So current plan is to use a MD5 hash during the (not SQL related) export process to identify the contents of this CSV file, and export only the md5 (32 digit hex) as a lookup to identify the contents. If the SQL import process finds a new (unknown) MD5 it will request the actual contents, otherwise it will simply use the MD5 as a key/id/code for the actual array contents that are already stored.
There's probably a certain terminology I'm not familiar with for this type of thing.. I've never heard of something like this. I realize collision is a threat, but I'm unsure how much I should be worried about it with this type of data (similar size/contents, but a relatively small amount of possibilities). I think up to even 0.1% collision would be acceptable which is probably way more than enough.
Does this sound like a bad idea to anyone? Are there certain hash functions I should use for this type of thing? Anyone have suggestions of where to look next?
Thanks!
I'm trying not to use a temp table, but i may have to do so..
I'm using sql2005 for this case.
i have a derived table that makes the following results:
ID Status Name
2 1 "A"
2 2 "B"
I want to get the following:
ID Name1 Name2
2 "A" "B"
but like I said before, I can't repeat the query that gets the first 2 rows, as it's pretty invovled. a temp table is the best route I see right now, but I just wanted to be sure I'm not missing something. If I've aliased it as 'results', is there a way to alias results again as something else? or maybe a trick with CTEs? I will try that! It seems promising.
I'm trying not to use a temp table, but i may have to do so..
i have a derived table that makes the following results:
ID Status Name
2 1 "A"
2 2 "B"
I want to get the following:
ID Name1 Name2
2 "A" "B"
but like I said before, I can't repeat the query that gets the first 2 rows, as it's pretty invovled. a temp table is the best route I see right now, but I just wanted to be sure I'm not missing something.
Hi, this is probably a simple question but I just can't figure it out. I'm using SQL Server Reporting Services 2005 sp1.
I'm trying to design a report that displays a particular embedded image on the first page, and then a different one on every subsequent page. I.e full, fancy company logo on the first page, and a trimmed down version on every other. In Crystal, I would have simply used the Report Header and Page Header sections to achieve this - easy.
However, in SQL Reporting Services, there is only a Page Header section - therefore whatever I place in the Page Header shows on every page. Now, I know how to stop it displaying on the first page, but I don't know how to display the other image instead.
I read in a support forum that it is possible to do this by "placing report items above or below your data regions" but I can't get it to work.
Grateful for any assistance.
Matt
I have a table where I need to display groupings of information. If there isn't any data for a given group, I still need to include that group and say "no applicable data" or somesuch underneath it. Any way of doing this?
View 1 Replies View RelatedHi,I would like to change my select to generate table that will resultsThat will haveService, Room, Season A, Season BWhere season names are saved in database and in their colums I would like to have pricing for rooms.How can I accomplish this - I dont know how to clearly explain - hope SQL will help: String selectCommandBookings = "SELECT dbo.Service.Name AS Service, dbo.Room.Name AS Room, dbo.Season.Name AS Season, dbo.HSRSeason.Price"; selectCommandBookings += " FROM dbo.Season INNER JOIN"; selectCommandBookings += " dbo.HSRSeason ON dbo.Season.SeasonID = dbo.HSRSeason.SeasonID INNER JOIN"; selectCommandBookings += " dbo.HSR ON dbo.HSRSeason.HSRID = dbo.HSR.HSRID INNER JOIN"; selectCommandBookings += " dbo.Room ON dbo.HSR.RoomID = dbo.Room.RoomID INNER JOIN"; selectCommandBookings += " dbo.Service ON dbo.HSR.ServiceID = dbo.Service.ServiceID"; selectCommandBookings += " WHERE (dbo.HSR.HotelID = '" + hotelID + "')"; selectCommandBookings += " ORDER BY dbo.Service.Name, dbo.Room.Name, dbo.HSRSeason.Price";
View 2 Replies View Related
There are 2 tables
tPeople
ID Name
1 Arun
2 B
3 C
tAddress
PeopleID Address
1 Test Address A
1 Test Address B
1 Test Address C
2 Address A
3 Address1
3 Address2
Expected Result
ID Name Address1 Address2 Address3
1 Arun TestAdressA Test Address B Test Address C
2 B Address A
3 C Address1 Address2
Address columns repeated = max(count(Address)) for PeopleID
Help me on this!
I can do it through dynamic sql using Execute sp_executesql
Is there any workaround except this?
I am using table object to present report.
table row1 has all the column names and table row2 has the data.
How can i put a horizontal line between column names and the data rows.
Thank you very much.
Hi,Does anyone out there know how to do this? I've been banging head forawhile now trying to answer this seemingly simple question.tia,Mike
View 3 Replies View Relatedi ran a preview of a matrix based report whose column headers are dates. The dates seem to be displaying in a somewhat (not completely) random order from left to right. How can I ensure that they display chronologically from left to right?
View 1 Replies View RelatedIf a single row of data spans a page then the column header is not repeated until the next row on the next page.
Is there a way to overcome this?
I have a single table that consist of 4 columns. Entity, ParamName, ParamsValue and ParamiValue. This table stores normalized Late Fee related parameters for apartments. The Entity field contains a code that identifies the apartment complex. The ParamName in a textual field that contains the name of the parameter that the other 2 fields define the value for; ParamsValue and ParamiValue. If the Late Fee parameter (as named in ParamName is something numerical then the value for that parameter can be found in ParamiValue else its in ParamsValue.
I don't know if 'Pivot' is the correct term to use for describing what I am trying to do because I've looked at the Pivot examples and I don't see how that will work for this. Using the Table and data as provided below, how would I construct a query so that I get 1 row per Entity in which the columns are the ParamsValue or ParamiValue for the ParamName listed in the column header (for the query)?
Below is the DDL to create the table and populate it.
USE [DBA_UTIL]
CREATE TABLE [dbo].[PARAMEXAMPLE](
[Entity] [varchar](16) NULL,
[Code]....
Hi,
I have a small web application managing complaints. During multiuser testing we noticed that when complaints where added at "exactly" the same time one complaint text seemed to be over writing the other, and returning the current max value for table id as current complaint number.
I tested in my development environment and was able to recreate reasonably easily ( 1 go out of 3 recreated the issue ). The Id column itself is an auto increment ( primary key ), so I can't think of a concievable reason why one record should overwrite another. I should say that I am assuming the record is overwritten, perhaps there is a clash and one complaint is ignored by the database.
Have anyone encountered this in the past?
Thanks
I am very new to SQL, but I am now receiving a updates on a database from an online HD. My idea was that I could download the updated database and paste over the existing database in my SQL folder. For some reason that is not working. How should this database be updated. I would prefer not to have to drop and add everyday.
Possibly I could make a database that is not in any folder and then make an update to it from the newly recieved database, but I am not sure how that would be done.
I have a new SQL 2005 (SP2) Reporting Services server to which I've just upgraded and deployed some SSRS 2000 reports.
I have a subreport that contains a matrix with two groups. The report data seems to be inexplicably repeating the data for the first row in the group for all rows in the group. Example:
ID1
ID2
DisplayData
1
1
A
1
2
B
1
3
C
2
1
A
2
2
B
2
3
C
Parent group is on ID1, child group is on ID2, report would show:
1
1
A
2
A
3
A
2
1
A
2
A
3
A
Is this a matrix bug in 2005 SP2, or do I need to do something differently? I can no longer pull a comparison version from an SSRS 2000 server to verify, but I believe it was working as expected before...
When I create a db backup on our network using BACKUP DATABASE...
BACKUP DATABASE [TKKCommonData] TO DISK = N'G:SQL_BACKUPSTKKCommonDataTKKCommonData_DATA.bak' WITH NOFORMAT, NOINIT, NAME = N'TKKCommonData_DATA-Full Database Backup', SKIP, NOREWIND, NOUNLOAD, STATS = 10
I've specified the NOINIT so that it appends rather than overwrites the database, however the database is still overwritten.
Any idea how to get the database to backup and append to the set rather than overwrite the backup ?
Programmers HowTo's -- http://jhermiz.googlepages.com
Hello,
I'm trying to create installer that installs database from empty backed up database.
The SQL script executed by installer:
RESTORE DATABASE [DU] FROM DISK = N'$TARGETDIR$DuTempDU.bak' WITH FILE = 1, MOVE N'DU' TO N'$DATABASE_DIR$DU.mdf', MOVE N'DU_log' TO N'$DATABASE_DIR$DU_log.ldf', NOUNLOAD, STATS = 10
GO
There $TARGETDIR$ and $DATABASE_DIR$ are MSI variables set on runtime. The REPLACE flag is not set, but DU database (non empty )still gets overwritten with empty database. Do I need to check manually if database exists before trying to restore it?