Hi, I need to replace a character from a column of a txt file. I have defined the column and the values (datetime type for sql server) that I receive are like this: 2008-02-15-20.07.19
So, I need to replace the "." with a ":" beacuse those are minutes and sql server uses ":" for minutes
How can I do this? Any help?
Thanks
I'm trying to find a specific string (a name) and replace it with another inside of a VARCHAR(7000) field. Unfortunately, there are names like Ted and Ken that I'm trying to replace. I would like to leave words like Broken, admitted, etc... intact.
UPDATEtbl
SETBody = LEFT(REPLACE(tbl.Body, pm.OldFirstName, p.FirstName), 7000)
FROM Table tbl
JOIN Person p ON p.PersonID = tbl.PersonID
JOIN PersonMap pm ON pm.PersonID = p.PersonID AND LEN(pm.OldFirstName) > 2
WHEREtbl.Body LIKE '%[^a-z]'+pm.OldFirstName+'[., ]%
'The problem I'm running into is that the '[, ]%' in the LIKE excludes any record that ends with the FirstName because it is requiring either a space, comma or period after the name. Is there some way to add an empty string to the list of acceptable characters as that would cover any scenario in the data? I would prefer not to add all characters except space, comma and period, but I guess I could do that.
I have the following scenario, The contents of main file are like :
ServerCentral|||||forum|||||||||||||||is||||||the||best
so||||||be|||||on||||||||||||||||||||||||||||||||||||||||||||it
And I need the output in the following form:
ServerCentral=forum=is=the=best
so=be=on=it
The logic being that multiple and consecutive occurrences of the special character, here - pipe , should be replaced by a single special character.
I have the following:----------------- WHILE PATINDEX('%,%',@Columns)<> 0 BEGINSELECT @Separator_position = PATINDEX('%,%',@Columns)SELECT @array_Value = LEFT(@Columns, @separator_position - 1)SET @FieldTypeID = (SELECT FieldTypeID FROM [Form].[Fields] WHERE FieldID = (CAST(@array_Value AS INT)))SET @FieldName = (SELECT [Name] FROM [Form].[Fields] WHERE FieldID = @array_Value)print 'arry value' + CONVERT(VarChar(500), @array_value)print 'FieldTypeID: ' + CONVERT(VARCHAR(500), @FieldTypeID)PRINT 'FieldName: ' + @FieldNameBEGINIF @FieldTypeID = 1 OR @FieldTypeID = 2 OR @FieldTypeID = 3 OR @FieldTypeID = 9 OR @FieldTypeID = 10 OR @FieldTypeID = 7BEGINSET @InnerItemSelect = ' (SELECT ISNULL(CONVERT(VARCHAR(MAX),[Value]),'''') FROM [Item].[ItemDetailFieldRecords] IDFR WHERE IDFR.ItemDetailID = ID.ItemDetailID AND IDFR.FieldID = ' + @array_Value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT ISNULL(CONVERT(VARCHAR(MAX),[Value]),'''') FROM [Item].[TaskFieldRecords] TFR WHERE TFR.TaskID = T.TaskID AND TFR.FieldID = ' + @array_Value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FieldTypeID = 4 OR @FieldTypeID = 8 --DropDownList/RadioButtonlistBEGINSET @InnerItemSelect = ' (SELECT [Value] FROM [Form].[FieldListValues] FFLV INNER JOIN [Item].[ItemDetailFieldListRecords] IDFLR ON FFLV.FieldListValueID = IDFLR.FieldListValueID WHERE IDFLR.ItemDetailID = ID.ItemDetailID AND FFLV.FIeldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT [Value] FROM [Form].[FieldListValues] FFLV INNER JOIN [Item].[TaskFieldListRecords] TFLR ON FFLV.FieldListValueID = TFLR.FieldListValueID WHERE TFLR.TaskID = T.TaskID AND FFLV.FIeldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FieldTypeiD = 5 --CascadingBEGINSET @InnerItemSelect = ' (SELECT [FCV].[Value] FROM [Form].[FieldCascadingValues] FCV INNER JOIN [Form].[FieldCascadingLookUpTables] LT ON FCV.FIeldCascadingLookupTableID = LT.FieldCascadingLookupTableID INNER JOIN [Item].[ItemDetailFieldCascadingRecords] IDFCR ON IDFCR.FieldCascadingValueID = FCV.FieldCascadingValueID WHERE IDFCR.ItemDetailID = ID.ItemDetailID AND LT.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT [FCV].[Value] FROM [Form].[FieldCascadingValues] FCV INNER JOIN [Form].[FieldCascadingLookUpTables] LT ON FCV.FIeldCascadingLookupTableID = LT.FieldCascadingLookupTableID INNER JOIN [Item].[TaskFieldCascadingRecords] TFCR ON TFCR.FieldCascadingValueID = FCV.FieldCascadingValueID WHERE TFCR.TaskID = T.TaskID AND LT.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FieldTypeiD = 6 --ListBoxBEGINSET @InnerItemSelect = ' (SELECT i.[CSV] FROM @ItemDetailLV i WHERE i.ID = ID.ItemDetailID AND i.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT it.[CSV] FROM @TaskLV it WHERE it.ID = T.TaskID AND it.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FieldTypeID = 11 --UsersBEGINSET @InnerItemSelect = ' (SELECT SU.[UserID] FROM [Security].[Users] SU INNER JOIN [Item].[ItemDetailUserRecords] IDUR ON SU.UserID = IDUR.UserID WHERE IDUR.ItemDetailID = ID.ItemDetailID AND IDUR.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT SU.[UserID] FROM [Security].[Users] SU INNER JOIN [Item].[TaskUserRecords] TUR ON SU.UserID = TUR.UserID WHERE TUR.TaskID = T.TaskID AND TUR.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FIelDTypeID = 12 --GroupBEGINSET @InnerItemSelect = ' (SELECT SG.[GroupID] FROM [Security].[Groups] SG INNER JOIN [Item].[ItemDetailGroupRecords] IDGR ON SG.GroupID = IDGR.GroupID WHERE IDGR.ItemDetailID = ID.ItemDetailID AND IDGR.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT SG.[GroupID] FROM [Security].[Groups] SG INNER JOIN [Item].[TaskGroupRecords] TGR ON SG.GroupID = TGR.GroupID WHERE TGR.TaskID = T.TaskID AND TGR.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDENDPRINT 'Inner Item Select:' + @InnerItemSelectPRINT 'Inner Task Select:' + @InnerTaskSelectSET @IDSelect = @IDSelect + @InnerItemSelect + ', 'SET @TSelect = @TSelect + @InnerTaskSelect + ', 'SELECT @Columns = STUFF(@Columns, 1, @separator_position, '')END --------------- That is only part of a large query that writs a SQL Query to a column in a Database. That Query (in the column) is just ran normally so I don't need to compile it each time I want to run it.THe problem I have is @FieldName might be: ryan's field. That apostrophe is killing me because the SQL keeps it as ryan's field, not ryan''s field(note the 2 apostrophes). I cannot do: REPLACE(@FieldName, ''', '''') because it's not closing the apostrophes. Is there an escape character that I can use to say only one: ' ?Would the only solution be to put: ryan''s field into the Database, and just format it properly on the output? Thanks.
View 4 Replies View Relatedi would like to replace the last character of one column to *here is the code:
update table set right(column, 1) = '*'
where WORKFLOW_ID = '2'
Hi,
lets say i have a table and having some varchar columns. What i wanna do is, to change "ý" character with "I" character in those columns.
Can anyone help me?
I'm trying to remove the special character ÿ from a varchar
select replace(my_col,'ÿ',' ')
this works, but the problem is that it also seems to replace the 'normal' y
(Database is case sensitive)
Why is that?
I have to replace 'MED-40'instead of '30' in an incidentno column of incidents table ,the fiels is varchar(12),now the problem is it is replacing whereever it sees '30' while I want only the leftmost to be replaced for eg
Let '301530' be the incidentno to be replaced
if I run
UPDATE incidents_mm set incidentno = replace(incidentno, '30', 'MD-40')where incidentno= '301530'
query i get the ans given below
'MD-4015MD-40'
and I just want the ans to be
MD-401530
In short i just want first 2 characters to be replaced is there any way i can do that
Thanks in adv
CHALASANI writes "I have a name in my table which is "ra_ja" I want to find the name with the help of the'_' character.
Can you please help with the querry
Sorry with my english
Thank you"
I have a string of characters in my data flow and I need to add a derived column showing the # of times a certain character appears within that string. For example, my string in the data flow is:
NNNNNRJKSURNNNEJNNNN
Now I need to count the number of "N"s in that column. From the example above, I should get the integer 12, and that would be the value of my derived column. Any ideas?
Hi all,
Am searching for a built-in function that retrives me the occurrence (counts) of a particular character inside a string.
For e.g. In the String 'SqlServer'. I want to find the no of the character 'e', which shud retrive the value as 2.
Can this be acheived through any function.
Cheers !
ash
I have an database that is housing a path used to locate an external file. This application was written many years ago and I am now trying to bring the files into the database as a VARBINARY.
The table is holding the path like this "/folder/folder/file"
I am trying to convert that path to "folderfolderfile"
In my Select statement I have
SELECT ProdID, REPLACE (PATH, /, ) FROM dbo.blahblah
The problem is that I can't figure out to make SQL understand that "/" is the character I want to replace.
Hi I have a text file which I need to import into Access or SQL.
It is 500,000 records which is pipe delimited. The problem is, is that it can contain carriage returns: (square symbol).
Therefore I need to find and replace these characters
Does anybody know of any free ware text file viewers that can do this??
Best Regareds
David
I am currently having a problem where my SQL server seems to lock any variables to 1000 characters (ie. varchar(8000) can only hold 1000)I have read in numerous sources it was possible to change that limit so the varchar can truly hold the 8000 characters and not stop at 1000, but there was no info on how to do this.I am looking for a "How to" to put this limit to 8000.Thank you!
View 10 Replies View RelatedI am trying to replace all special characters in a column with one special character.
Example:
Table: dbo.Employee
Column: Name
Name
-------
edwardneuman!"<]
mikemoreno)'>$:
JeffJensen"?>"
I am trying to get the namepart to the left of ANY special character. To achieve this, I am thinking of replacing all the special characters with a single special character so that I can find the first occurrence of that special character and grab left of the special character (SUBSTRING/CHARINDEX). This way I don't need to loop through all the special characters.
I am expecting the following results:
Name
-------
edwardneuman<<<<
mikemoreno<<<<<
JeffJensen<<<<
Hi,another problem I have is that have compounded fields in my sql table.Exampleproduct@customerI need a simple function to return "customer", so it should return the valueafter "@", unfortunate "@" will sometimes be character number 6, sometimescharacter number 7 etc.regardsJorgen
View 1 Replies View RelatedI know there has to be a way to do this, but I've gone brain dead. Thescenario..a varchar field in a table contains a date range (i.e. June 1,2004 - June 15, 2004 or September 1, 2004 - September 30, 2004 or...). Theusers have decided thats a bad way to do this (!) so they want to split thatfield into two new fields. Everything before the space/dash ( -) goes intoa 'FromDate' field, everything after the dash/space goes into the 'ToDate'field. I've played around with STRING commands, but haven't stumbled on ityet. Any help at all would be appreciated! DTS?
View 1 Replies View RelatedI need to run a replace on a varbinary field but I am unsure how. I have tried mulitple different methods and to no avail. I am stumped.
I have attached a zip folder that contains a spreadsheet that shows what I am trying to do. In the first tab it shows the SQL command I use to call the field I want to change. In this case it's the Content field and I am calling it using the content_key. As you can tell the content is stored as varbinary. In the second sheet, It shows this varbinary being converted to varchar(max) and it shows what the actual text says.
The table that this information is stored is is called digitalassetcontent
I need to remove the
Code:
<STYLE>H1{font-weight:bold}H1{font-size: 14pt}OL</STYLE><H1>Product Description</H1>
That is in front of the actual product description.
Somehow I need to run this command:
Code:
Update digitalassetcontent
set content = replace(CAST(content as varchar(max)), '<STYLE>H1{font-weight:bold}H1{font-size: 14pt}OL</STYLE><H1>Product Description</H1>','')
Where CAST(content as varchar(max)) like '<STYLE>H1{font-weight:bold}H1{font-size: 14pt}OL</STYLE><H1>Product Description</H1>%' AND content_key = 'desc214974236480438500781058983745755010'
This is the error message I get when running this code: Implicit conversion from data type varchar(max) to varbinary(max) is not allowed. Use the CONVERT function to run this query.
On the varbinary field. How do I do this?
Is it possible to replace a string value that uses a wildcard? For example, I'm trying to update a field on a table and replace the field value where it starts with a specific two character pattern and remove it from the string. The field is a delimited string and I want to replace any occurrence of ;A0% or ;A0* with a null value. I don't want to replace the entire field with a null value.
Let's say my field value is this:
;00236;08231;06106 Washington DC;06106 CCA Wash DC;05120;A0106;
I want the result to be this:
;00236;08231;06106 Washington DC;06106 CCA Wash DC;05120;
I was trying several variations:
UPDATE myTable SET myField = REPLACE(myField,'XX%','')
In a SQL Server Db, what is the maximum amount of data a field can hold?
I am using right now nvarchar with a length of 4000.
Is there another setting to allow even more in a field?
Thanks all,
Zath
I have a text field that contains multiple words. Is there a way with SQL to relace a single word with another?
for example:
FIELD : CompanyName
DATA : Microsoft Corp.
DATA : IBM Corp.
etc...
DATA : Canon Corp. of America
How can I run a routine to just REPLACE "Corp." with "Corporation" ?
Thanks for your help!
Scott
I need help on replace char in ntext data type
Here is the example data
<qMultipleChoice><qText>The%20AE%20understands%20what%20conditions%20the%2 0Account%20Manager%20is%20allowed%20to%20sign-off
20on.</qText><qChoice>Strongly20Disagree</qChoice><qChoice>Disagree
</qChoice><qChoice>Agree</qChoice><qChoice>Strongly%20Agree</qCh
I want result look like this
First Column:The AE Understands what conditions the Account Manager is allowed to sign-off.
Second Column: Strongly Disagree Disagree Agree Strongly Agree
This is what i had so far
Select (SUBSTRING(QuestionText, (PATINDEX(N'%<qText>%', QuestionText) + 7),(PATINDEX(N'%</qText>%', QuestionText) - (PATINDEX(N'%<qText>%', QuestionText) + 7)))) From tblQuestion
my result:
The%20AE%20understands%20what%20conditions%20the%2 0Account%20Manager%20is%20allowed%20to%20sign-off%20on.
I have problem with replace '%20' and how to make the second column.
Any Help?
Thanks
Shan
I am hoping someone will be able to help me with this.
i have a table of accountholders with the following fields
account_no
account_name
image_path
the image_path field has a defaultvalue images/***.jpg
I am looking for a query code to update the value in the image_path field by replacing the *** value with the value of the
account_no field
I need to strip some puntcuation from any field in a given table.I'd rather like to avoid using the replace () for each field in thetable.Anyone have a nifty way do this?Is there a special name that I can use in the replace that means theentire row?(other than syntax, something like REPLACE(@ROW,CHAR(39),'') )tiaRob
View 1 Replies View RelatedDoes ORDER BY work on character data type in SQL Server through ODBC?
I tried using the SQL Query Tool in SQL Enterprise Manager and it works but using through ODBC I can't get any results.
Query: SELECT company_id, company_name FROM lt_company ORDER BY company_name
company_id = integer
company_name = 30 characters
Hello,I wonder how I can insert a string which contains #, as # is a specialcharacters in sqlThanks
View 1 Replies View RelatedHiI have a character field (char ot varchar) that I want to force only tocontain numeric characters.Can that be done by way of defining a constraint on the field ?or by any other way in the field/table definition ?What id the syntax ?Anyone have examples ?ThanksDavid Greenberg
View 1 Replies View RelatedI was wondering what everyone felt about the fomats in characterfields where the front end application accepts anything.I wouldn't want a customer table where the customer name was lowercase on one, upper on another and who knows on the third.If character fields are not consistent, then formatting will have tohappen every time someone access the data for reporting - as anexample ...Thanks,Craig
View 1 Replies View RelatedI found it rather hard to replace a string in an NTEXT field in sql server 2000. Would it be easier in SSIS 2005? Please advise. Thanks.
View 8 Replies View RelatedI have a table called 'wp_postmeta' (Wordpress) which contains a column called 'meta_value'. A typical field in this column looks like this:
Code:
a:22:{s:12:"productimage";s:104:"http://www.disobeyclothing.com/wp-content/themes/eCommerce3/images/tshirts/SurveillanceSociety-Black.png";s:13:"productimage1";s:104:"http://www.disobeyclothing.com/wp-content/themes/eCommerce3/images/tshirts/SurveillanceSociety-White.png";s:13:"productimage2";s:0:"";s:13:"productimage3";s:0:"";s:13:"productimage4";s:0:"";
s:13:"productimage5";s:0:"";s:13:"productimage6";s:0:"";s:5:"pr
[code]...
I've tried to run the following query but each time I run it, it wipes all data in the field:
Code:
UPDATE wp_postmeta set meta_value=replace(meta_value, 'URL...')
I've also tried this query, but it has the same effect:
Code:
UPDATE wp_postmeta
SET meta_value = replace(LTRIM(RTRIM(meta_value)), URL...
I am attempting to find quotes (") in a column and replace with the string '--THIS-WAS-QUOTES--'. Right now my script only converts the first quote it finds in the description column, converts to the string and moves to the next row leaving the other quotes as they were. Below is my query script
DECLARE @find varchar(8000),
@replace varchar(8000),
@patfind varchar(8000)
SELECT @find = '"',
@replace = '--THIS-WAS-QUOTES--'
SELECT @patfind = '%' + @find + '%'
UPDATE Incident
SET description = STUFF(convert( varchar(8000), description ),
PATINDEX( @patfind, description ),
DATALENGTH( @find ),
@replace )
WHERE description LIKE @patfind
I am attempting to find quotes (") in a column and replace with the string '--THIS-WAS-QUOTES--'. Right now my script only converts the first quote it finds in the description column, converts to the string and moves to the next row leaving the other quotes as they were. Below is my query script
DECLARE @find varchar(8000),
@replace varchar(8000),
@patfind varchar(8000)
SELECT @find = '"',
@replace = '--THIS-WAS-QUOTES--'
SELECT @patfind = '%' + @find + '%'
UPDATE Incident
SET description = STUFF(convert( varchar(8000), description ),
PATINDEX( @patfind, description ),
DATALENGTH( @find ),
@replace )
WHERE description LIKE @patfind
here is my business/data object for some reason I only get the first character back, say value is Charlie, I only get C public string GetUserName(long UserId)
{
try
{
string userName;
DiscussionDB data = new DiscussionDB();
List paramlist = new List();
paramlist.Add(data.CreateParameter("@UserId", UserId));
paramlist.Add(data.CreateParameter("@UserName", "", ParameterDirection.Output, DbType.String, 20));
data.ExecuteNonQuery("dbo.Discussion_User_Name", ref paramlist);
userName = paramlist[1].Value.ToString();
return userName;
}
catch
{
throw;
}
}
ALTER PROCEDURE [dbo].[Discussion_User_Name]
@UserId bigint,
@UserName varchar(20) output
AS
SET NOCOUNT ON
SET @UserName = (Select [Name] from Discussion_Member WHERE UserID = @UserID)
if (@UserName is null or @UserName = '')
BEGIN
SET @UserName = (Select UserName from Membership_User WHERE UserID = @UserID)
END