Replacing A Cluster Node: SQL Silent Install Setup Installshield Error
Sep 10, 2007
Can anyone tell me how to get around this? Installing SQL- no issues, just when applying the sp
I have tried numerous things, including rebuilding the 2nd node again
Trying to install a service pack on SQL 2000 node, and Install shield keeps returning this error, .
[InstallShield Silent]
Version=v5.00.000
File=Log File
[ResponseResult]
ResultCode=-8
I have reset temp directories on both nodes,
I have made user permissions and profiles exist
I have copied install files to both local and remote locations
I know the response €“ Installshield cannot find the silent response file, but SQL setup creates this on its own.
Short of bringing this production system down and re-installing on both nodes ( I did test this on a non-prod box by the way, no issues), I am at a loss
View 1 Replies
ADVERTISEMENT
Jun 24, 2015
I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
View 4 Replies
View Related
Jun 12, 2007
I read these instructions:
http://msdn2.microsoft.com/en-us/library/ms191545(SQL.90).aspx
But I'm not sure if I have to install SQL Server first on node 2, then add it to the cluster. Or does adding it to the cluster also install the software?
Thanks
View 1 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
Â
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Â Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command:Â Â Â Â Â Â Â Â Â sc config winmgmt start= autoÂ
Last command to run after above steps
4. Command:Â Â Â Â mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Jan 3, 2010
I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
View 30 Replies
View Related
Nov 23, 2015
I ran into problem while trying to install SQL Server 2008 to join to another node in a failover cluster ,you will find here the configuration doc and installation details. URL...
View 4 Replies
View Related
Aug 14, 2015
let me know apart from the following what else is required
2 for private network
2 for public network ......
1 for virtual server/windows cluster ip which is used to connect application
View 1 Replies
View Related
Feb 7, 2007
Hi all,
Try to install sql 2005 x64 on a Win2003r2 x64 two node cluster.
All looks fine as far I get to the "cluster node configuration" dialog.
My second node is always displayed as "unavailable node" reason "unknown".
- I checked the logfiles but could not find any error.
- Installation user & cluster user are both local admins.
- Tried with sql 2005 x32 version -> same result.
What do I miss out here?
Any help is highly appreciated.
TIA
acki
View 7 Replies
View Related
Apr 12, 2006
I tried to execute SQL Server Express Setup through InstallShield Script and it says that i required Admin Privilege. I checked and i have an Adnming privilegers.
Here is the Script. And the check says that i am an admin.
if ( Is(USER_ADMINISTRATOR, "") = TRUE) then
MessageBoxEx("Admin...","Install",SEVERE);
else
MessageBoxEx("Non Admin...","Install",SEVERE);
endif;
setuppath = "C:\Program Files\dir\Setup.exe";
sqlcmd = "ADDLOCAL=ALL";
LaunchAppAndWait(setuppath,sqlcmd,LAAW_OPTION_WAIT);
if(LAAW_PARAMETERS.nLaunchResult != 0) then
MessageBoxEx("Fail to install SQL Server Express...","Install",SEVERE);
endif;
What could be the possible reson for failr?
-timir
View 1 Replies
View Related
Mar 12, 2008
Hi all, My aim to install active/active 2 node SQL 2005 cluster. I have installed sql cluster on one mode, which automatically installed on node 2.
it works great. However When i tried to install second virtual server, it is not allowing me to install.
it says already install, can anyone tell me how to install active active cluster
View 1 Replies
View Related
Oct 23, 2014
I'm contemplating running two availability groups on a two node WSFC. The WSFC is setup with a file share witness (i.e. no shared storage). Can I safely run 1 AG on one primary node, and the other AG on the other node (as primary). Each AG would have replicas on the passive node. This would effectively allow both servers to be in use at the same time. In a failover event, I understand that both workloads would transfer to a single server - so the box needs to be sized appropriately.
View 1 Replies
View Related
Jun 11, 2015
We are in the process of building a 3 node SQL Server Cluster (Server 2012/ SQL Server 2012), and we have configured the quorum so that all 3 nodes have a vote (no file share witness as we already have an odd number of nodes).
As I understand it, this should allow the cluster to run as long as 2 of the nodes remain online.
However, the validation report states that 2 node failures would be acceptable and, when we tested this by powering off two of the nodes, the cluster did indeed continue to run on a single node.
View 4 Replies
View Related
Aug 21, 2007
I configure Windows 2003 R2 and SQL 2005 two nodes Cluster. When I move cluster resource from one node to anther node it takes around 30 seconds to become online. So in that time if any query is running it stops responding.
So please suggest in this regard
View 2 Replies
View Related
Oct 8, 2015
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
View 2 Replies
View Related
Jan 16, 2008
I invoke xp_cmdshell proc from inside a stored procedure on a 2-node active/passive SQL 2005 SP2 Standard cluster. Depending on which server the xp_cmdshell gets executed on I need to pass different arguments in the shell command. I thought I could use host_name() function to get the runtime process server, however, I am finding that it's not behaving correctly. In one example I know my active node is server2, but the host_name() function is returning server1. The only thing that I could possible explain this is that the MSDTC cluster group is not always on the same active node as the SQL server group and in the case I am talking about the cluster groups are in this mode (differnet nodes). Does the xp_cmdshell get executed by the SQL active node or the MDTC active node? And what is the best way to find out which server is going to run my xp_cmdshell?
Thanks.
Edit:
Perhaps another by product of this is that if I run select host_name() from the Studio Management query window i get different results depending on which server I am running the Studio Management on. On server1 I get server1 and on server 2 I get server 2, all the while server2 is the active node. I need a different function that will always let me determine the correct server that'll be running the xp_cmdshell...
Edit 2: I guess I could determine the running host inside the command shell itself, but I am curious to see if i can do it (cleaner) from SQL.
View 1 Replies
View Related
Feb 19, 2007
Hi,
I'm trying to create a silent installation which will create a new instance of the express version
on my clients machine, the problem is that i can't set the service account to local service
i.e AGTACCOUNT="NT AUTHORITYLOCAL SERVICE"
if im running the normal setup (GUI) i can set this property easly,
but from the command line all i get is
"NT AUTHORITYLOCAL SYSTEM" which is the default i think
how can i do it from the command line???
Thanks
View 8 Replies
View Related
Aug 10, 2015
I have been facing following Error in Failover cluster setup as below. I have prepared 2 node and 2 instance sql server failover cluster on top of windows failover.I have deleted MTCBJINS07 in AD and recreated even after, problem is not solved. MTCBJINS07 is my 2nd sql instance sql server network name.
Cluster network name resource 'SQL Network Name (MTCBJINS07)' failed registration of one or more associated DNS name(s) for the following reason:
DNS bad key.Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
View 2 Replies
View Related
May 25, 2007
Hi!
I have created a setup in visual studio and set the sql server as a pre-requsites.
now when the setup is run from
setup.exe
it checks whether sql server is installed... if installed then continues otherwise install sql server express edition, now this installation is silent,
I need to set the sa password during installation of sql server . i have no option to set the password during installation, can any one help
View 1 Replies
View Related
Jun 3, 2006
I
am trying to install SQL 2005 in a 2-node Windows 2003 cluster. I set the cluster up through Virtual Server 2005 with 2 virtual nodes and one virtual domain. The nodes can connect to each other as well as the physical machine. When I try to install a fresh copy of SQL 2005 on my cluster, I get an error every time. The
error stops the installation while checking system configuration after
installing prerequisites. The log file entry is as follows:
*******************************************
Setup Consistency Check Report for Machine: --SERVERNAME--
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: Warning
Description:
IIS is not installed, therefore Report Server feature will be disabled
Action: Install IIS in order for Report Server feature to be enabled
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
1
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache
Source File Name: datastoreclusterinfocollector.cpp
Compiler Timestamp: Fri Sep 16 13:20:12 2005
Function Name: ClusterInfoCollector::collectClusterVSInfo
Source Line Number: 883
----------------------------------------------------------
Failed to detect VS info due to datastore exception.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
----------------------------------------------------------
Failed to find a cluster group that owned shared disk: J:
WinException : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
View 5 Replies
View Related
May 29, 2007
I have a desktop application in which I use Sql Server CE.
It all works well on my development machine.
It also works on other machines if I copy the sql dll files in the same path as the .exe
I'm trying to avoid all kinds of user interaction. They don't need to know that I'm about to install Sql Server CE really
So I'm hoping to avoid writing in the manual that the user should install SQLServerCE31-EN.msi, which I think is the correct install package.
So my question is: How do you silently/unattended install Sql Server CE on the desktop?
View 1 Replies
View Related
Mar 19, 2007
Hi,
how do Silent Installation with VBscript ? because I have some step for user interactive.
please anyone put an example about this or put a link to.
thank you very much.
View 6 Replies
View Related
Nov 13, 2015
Two node AO cluster setup.
I found errors frequently in cluster events at  logs as below
"Cluster network interface 'Node1 - 10.X.XXX.1' for cluster node 'Node1' on network 'Cluster Network 1' failed. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges."
How to fix this issues? is it missing any patch OS or cluster side?
View 3 Replies
View Related
Apr 10, 2007
I 'm trying to install Sql Server 2005 Express Edition using c# 2.0 by starting a process and launching setup. I also want to informed about installation progress. For instance i want to inform end user if any installation error return or if setup has successfully completed etc. I think i need a callback... I have no problem about silent - unattended install but how can i informed about running installation progress ? and send these info to end user 's form ?
Regards.
Yusuf Incekara
View 5 Replies
View Related
Feb 21, 2008
Hi,
I want to build a silent setup/installation of MS-SQL-Server-Express 2005 for installation on customers computers.
I want to integrate it in my own setup/installation routine of my application.
How can I do that?
Where can I get Infos or tutorials? Perhaps here ?
Sorry for my bad english
Regards Tron
View 7 Replies
View Related
May 24, 2002
Hi all,
After doing a silent install of the MSDE, my application cannot access the database that is loaded on the local machine -
I am getting an error stating - 'login failed for user 'sa'. Reason: Not associated witha trusted SQL server connection'
Is there are parameter or something that i need to change in my UDL??
or is there a way to tell the server to work in non-trusted inviroment via the OSQL program???
thanks
tony
View 1 Replies
View Related
Feb 22, 2008
Try to install SQL server Express
download from Microsoft site SQLEXP32.EXE version 9.0.3042.0
Expand this file using command line install "start /wait setup.exe /qn ADDLOCAL=All LOGNAME="c: empInst_SQLEXP.cab"
at installed computer just have C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGsummary.txt
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Fri Feb 22 10:58:50 2008
and C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_DC7660_TEST2_Core.log
Microsoft SQL Server 2005 Setup beginning at Fri Feb 22 10:58:50 2008
Process ID : 3884
C: empSQLEXPsetup.exe Version: 2005.90.3042.0
Running: LoadResourcesAction at: 2008/1/22 10:58:50
Complete: LoadResourcesAction at: 2008/1/22 10:58:50, returned true
Running: ParseBootstrapOptionsAction at: 2008/1/22 10:58:50
Loaded DLL:C: empSQLEXPxmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2008/1/22 10:58:50, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Wed Jun 14 16:28:04 2006
Function Name: sqls::CryptSameUserSameMachine:rotectData
Source Line Number: 50
2
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "3884"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2008/1/22 10:58:50
Complete: ValidateWinNTAction at: 2008/1/22 10:58:50, returned true
Running: ValidateMinOSAction at: 2008/1/22 10:58:50
Complete: ValidateMinOSAction at: 2008/1/22 10:58:50, returned true
Running: PerformSCCAction at: 2008/1/22 10:58:50
Complete: PerformSCCAction at: 2008/1/22 10:58:50, returned true
Running: ActivateLoggingAction at: 2008/1/22 10:58:50
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
00DBCFC0Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Class not registered.
have a Unexpect error?
any advice welcome.
View 1 Replies
View Related
Aug 25, 2007
I can't get SQL Server 2005 to update to SP2 in either silent or unattended mode. None of the standard switches work. I've used -s, -m, /q, /qb, and /qn all with no favorable result. I am still prompted for user input at every screen. Suprisingly I've had no such problems with the express edition, just the server itself. Is there a way to make this thing work? Here is the line I've been feeding to the installer.
"<SERVER_PATH>SQL Serversql2005SP2.exe" start /wait setup.exe /qb /settings "C:SQLSettings.ini" /L*v "C:SQLInstall.log" /norestart
I have also tried the following since it looks like the file that is unpacked by the SP2 install is actually hotfix.exe
"<SERVER_PATH>SQL Serversql2005SP2.exe" start /wait hotfix.exe /qb /settings "C:SQLSettings.ini" /L*v "C:SQLInstall.log" /norestart
I also have tried the following generics:
"<SERVER_PATH>SQL Serversql2005SP2.exe" -s
"<SERVER_PATH>SQL Serversql2005SP2.exe" -m
"<SERVER_PATH>SQL Serversql2005SP2.exe" /q
View 3 Replies
View Related
Sep 12, 2007
Hi,
I'm doing a silent install of SQLServer Express 2005 as explained in http://msdn2.microsoft.com/en-us/library/ms144259.aspx .
I am setting DISABLENETWORKPROTOCOLS=2 because I want to enable TCP/IP protocol at install time.
However it seems that per default SQLServer is configured to use dynamic TCP/IP ports, forcing me to contact the SQLBrowser.
How can I switch to a fixed port, say 1433, at install time?
Thanks, in advance,
Dirk.
View 11 Replies
View Related
May 18, 2007
I'm still doing some research but I thought I'd slap a quick post up here anyway. I'm trying to create a small 'setup and deployment' project in studio 2005 that includes a prerequisite (sqlexpress). The one thing I've noticed is that there is not an option to install this silently by providing the executable with the appropriate switches. I could easily write my own small utility to do the work or I could use a third-party component like NSIS, however, I'm quite simply amazed that this feature was left out of studio 2005. It's quite possible I'm missing something...any feedback is appreciated 100 times over!
Thanks
Corey
View 3 Replies
View Related
Aug 4, 2006
I'm currently building an MSI to install SQL Express and want to install as a new instance, not the default instance, and not into the SQLEXPRESS instance either.
I saw the package.xml for Express in my VS Studio install. How would I go about using this? Or would I have to modify the MSI via Orca or something? I hope not. Wouldn't have a clue where to start.
In short, regardless if there is already an SQL Express instance on the machine or not, I need to silently install a fresh new instance of the server engine only, no client tools except sqlcmd.exe
I have seen that MS would advise that everyone use the SQLEXPRESS instance but I don't agree with it. I don't want other application installs trampling over my server settings and I don't want to trample over others. For example, expose others to TCPIP and CLR when they don't need it, and conversely others swithing them off in a shared server instance when I do need them.
View 7 Replies
View Related
Aug 17, 2006
Yet another roadblock: Does the standard SQL SE 2005 not install any of the query commands? (isql, isqlw, or osql.exe's). I could have sworn that they were, but every time I go to test the install on my VM none of them are ever installed. If it doesn't is it included in the advanced version of it (which I'd really rather not do)? If still no what's the easiest option I still have open? Can I have my app connect to the master db and run a restore script from the app? I've been arm wrestling with this install for over a week and it's just about brow-beaten me completely.
TIA,
Jayyde
View 3 Replies
View Related
May 26, 2008
I am setting up a template.ini for my SQL2005 installs. The documentation on the INI file is great up until the "SQLCOLLATION" section.
How do I choose the SQL Collation: "Dictionary order, case-insensitive, uppercase preference, for use with 1250 Character Set" ?
SQLCOLLATION=???????
View 1 Replies
View Related
May 16, 2007
Hello,
I'm using the latest version of SQLEXPR32.EXE found here :
http://www.microsoft.com/downloads/details.aspx?FamilyID=31711d5d-725c-4afa-9d65-e4465cdff1e7&DisplayLang=en
Here is the command line that fails :
"sqlexpr32.exe -q /norebootchk /qn reboot=ReallySuppress
INSTANCENAME=MYINSTANCE SECURITYMODE=SQL SAPWD=mypassword SQLAUTOSTART=1"
Interrestingly, when the following command line is used to launch the setup,
it completes successfully :
"sqlexpr32.exe /norebootchk reboot=ReallySuppress INSTANCENAME=MYINSTANCE
SECURITYMODE=SQL SAPWD=mypassword SQLAUTOSTART=1"
The only difference between the two is the quiet switches used in the first
case : "-q" and "/qn"
After spending some time to understand what is going wrong, it seems that in
quied mode, Setup Prerequisite 'SQL Native Client' is not installed. Then
the remaining part of the setup fails because of this.
Any help appreciated.
View 7 Replies
View Related
