I have a SQL table with 5000 rows in it. Some of the other SQL columns have different values but if I wanted to swap say 500 of the rows would it be something like
UPDATE Coupins
SET Name='test1,test2,test3'
WHERE Name='test4,test5,test6';
I need basically to swap the Name value of these without affecting any other values.
I have a field in a table that contains a different formula (varchar(1000)) for each record. It's along the lines of something like this, although each formula is different: ([ColumnA] - [ColumnB])/([ColumnC] - [ColumnD]). I plug that into a dynamic SQL statement so that it can get executed in a select statement.
Due to the variations of the formulas, checking for Divide by Zero, etc, we want to move this to a .NET method. We'd like to replace "ColumnA" and "ColumnB", etc., with the actual values so that we're passing something like (5-3)/(6-2). I haven't been able to figure out a way to do this without actually executing it. We don't want to pass the solution, but the equation filled with the actual values rather than the column names.
I'm struggeling a bit with this one, goal is to show the first 3 characters of the name and replace the remaining characters with *** stars. Also the number of stars needs to match the lenght of the name as in the example above.I've tried:
REPLACE([ColName],
substring([Colname],
4,
LEN([colname]
)),
'*')
Hi
I was wondering if anyone has an idea of how we could find the table names and column names of the tables in our Sql server database at runtime/dynamically given our connection string? Please let me know.
Thanks.
I want to replace the value in a column with the content from listbox.
I have wrote the code like,
Dim i as Integer
dim sql as string
For i = 0 to Customerslist1.ListCount-1
sql = "UPDATE master (gstl) VALUES(" +chrb(34)+Customerslist1.Cell(i,8)+chrb(34)+")"
app.Gudangstock.SQLExecute(sql)
app.Gudangstock.commit
next
msgbox"insert ok"
UpdateCustomerList1
but no error found and the sql command is not executing.
Hi Guys,
I am faced with a problem that is giving me headaches. I have t1, t2 and t3. I t1 I have students that have a reference to t2 which are the schools they belong to. The problem arises when I see that there is redundancy in t2. There more records for the same schools. This was posible in giving the same school (postcode and name make it the same school) a different ID. In t3 I removed these redundant schools by using fuzzy grouping.
My problem is I want to ensure that the students are put using the schools from t3 instead of t2. So what I need to do is is to replace the redundant id from t2 with the correct id from t3.
Please help. Thans in advance
In an *existing* database, how would you remove the City column in the
Employees table, and put in the CityID key column from the Cities table
?
Hello. We have a list of 1000+ sku numbers. 90% of them start with u. I need to replace the u with T.
Concerns:
It has to only replace the first letter, if there are other "u"s in the sku, they need to remain.
Not all skus start with u, those that don't should remain the same.
I have searched and searched because I'm sure someone has requested the exact same thing but I can't find anything that is identical.
I have this so far but I know its not correct:
set sku = replace(left(sku,1),'u',right(rtrim(sku),1)+
'T')
Can someone help lead me down the right path?
Thanks in advance!!!
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
hi.
I have to update a column with new data. I have to replace the values that lay with a certain range. for example
my table has a column called ENI_KEYVALUE1, I have to update the data in this column only where the ENI_KEYVALUE1 is between P6_00001 and P6_00240. The values have to be replaced with values listed sequencially in an excel spreadsheet.
how do I do this???
thanks in advance
Hi there,
I have a derived column shape in which I replace a column with an expression.
The expression is an IF statement - a true result sets a value for the column and a false result just uses the existing value of the column (ie it replaces it with itself)
Like this.
ColumnName DerivedColumn Expression
ColumnA Replace 'ColumnA' ColumnB != ColumnC ? "y" : ColumnA
But whenever, the condition is NOT met, ColumnA is set to NULL!!!!
Does this mean that the column value is deleted before the Expression is applied?
If this is how it is meant to work, then does anyone have a way of doing what I want to do without creating extra columns in the dataset??
Cheers.
Hi,
this is my second attempt to get an answer to this question.
We want to strip our firstName column and lastname column of any punctuation that might be present.
What's the best of doing that?
Is my only choice to write a nested REPLACE for each character we want replaced (which will end up being very very long) or is there another way.
thanks
Zoey
I have a column like this:
Table: User
name, field1
Jack 1000|1001|1003
Berg 2000|1001|2004
Paul 1001|1000
Jane 1001
Now, I would like to replace all "1001" with nothing, and also remove the "|"-separator behind 1001 if it exists, basically removing both "1001" and "1001|", so the resulting table looks like this:
name, field1
Jack 1000|1003
Berg 2000|2004
Paul 1000
Jane
My tries, been plenty, but here are some:
Code:
UPDATE UserTable
SET field1 = REPLACE(field1, '1001', '')
UPDATE UserTable
SET field1 = REPLACE(field1, '1001|', '')
But the above queries replaces field1 only if the whole field matches '1001' or '1001|'...
The above queries do work, just like I want them to. I just happened to write them in this order on this post... did not do a copy of the actual query.
I need to replace a portion of a url in a column as a result ofchanging servers. Is there a SELECT/REPLACE/UPDATE combination querythat can do this. The table has close to a thousand entries and wouldbe nice if a query can be set to do this. Tried the REPLACE examplein the BOOKS ONLINE but it creates syntax error, apparently because itdoes not like the characters in the url and/or wildcards. I don't needto replace the entire url, only the portion before ".com". Thanks inanticipation of your help.Pradip Sagdeo
View 3 Replies View RelatedHi;I am trying to write a rountine ( below ) that will go into a colum oftext data type ( fae.pmcommnt ) locate the word "to" and replace it.I have the routine below. I get no error messages, but it also seemsto do nothing :).Any clues would be greatly appreciated.ThanksSteve================================================== =============declare @ptrP intSELECT @ptrP = PATINDEX('%to%', pmcommnt)from fae where projid ='00013'declare @ptrPC binary(16)select @ptrPC = TEXTPTR(pmcommnt)from faeif( TEXTVALID ('fae.pmcommnt', @ptrPC ) > 0 )print 'works'print @ptrPUPDATETEXT fae.pmcommnt @ptrPC @ptrP 2 'JJ'select projid, pmcommnt from fae
View 2 Replies View Related
I need to create the following table in reporting services
PRODUCT April March Feb
2008 2007 2008 2007 2008 2007
chair 8 9 7 4 4 4
table 3 4 5 6 4 6
My problem is the month names are a column in the dataset, but I dont know how to get it to fill as column headers???
Thanks in advance!!!
Hi All,I have come up against a wall which i cannot get over.I have an sql db where the date column is set as a varchar (i know, should have used datetime but this was done before my time and i've got to work with what is there). The majority of values are in the format dd/mm/yyyy. However, some values contain the word 'various'.I'm attempting to compare the date chosen on a c# .net page with the values in the db and also return all the 'various' values as well.I have accomplished casting the varchar to a datetime and then comparing to the selected date on the .net page. However, it errors when it comes across the 'various' entrant.Is there anyway to carry out a select statement comparing the start_date values in the db to the selected date on the .net page and also pull out all 'various' entrants at the same time without it erroring? i thought about replacing the 'various' to a date like '01/01/2010' so it doesn't stumble over the none recognised format, but am unsure of how to do it.This is how far i have got: casting the varchar column to datetime and comparing. SELECT * FROM table1 WHERE Cast(SUBSTRING(Start_Date,4,2) + '/' + SUBSTRING(Start_Date,1,2) + '/' +SUBSTRING(Start_Date,7,4) as datetime) '" + date + "'"Many thanks in advance!
View 7 Replies View RelatedHello,
Im trying to get the column names from a database and display them in textboxes. someone has already helped me by tellnig me that i need to use the FillSchema command. Which works just fine and I can see only the colum names in a datagrid when i bind it to that.
The problem is that I do not know how to extract the name of a column and put it in to a textbox ?
does anybody know how I can fo this ?
Thanks a million
Rob
Hi,How do I display the column names from my Sql server table?In asp3 the recordset allowed thisforeach key in rs ColumnName = key.name ColumnValue = key.valuenextHow do I do this in .Net?I want to use a DataReader so I can read through each record and only display the ones I want.TABLE_ONEColumn_OneColumn_TwoColumn_Threethanks,
View 1 Replies View RelatedHi, i need a query to have the columns names !!
If you have another solution, let me know !!
superj !!!
Hi
When I run this query..
SELECT COLUMN_NAME
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME='TableTest'
I get all the column names, but the result is not in the same order as when I check the design for the table, why is that?
At my work, we are upgrading a number of MS Access 2000 databases to SQL Server 2000. Many of the columns have names that do not follow the rules for Identifiers. For example there are columns with a numeric names 1,2,3,4,5,6,7,8,9. There are also columns with a hyphen in the name and columns that begin with a number and not an underscore or an alpha character. Plus there are columns with names like first, last, position, etc. (There was also columns with reserved words used as the names. I have changed those column names in the databases that I have already converted) Will leaving these names alone create a problem? The database serves as the backend to ASP pages.
Miranda
Hello,I'm still extremely novice to SQL and I've tried googling how to produce this result but I've been encountering a lot dynamic sql commands which isn't exactly what I want. If this is an ignorant question I do apologize but heres my scenario: I have a table with columns of the day, for instance: Monday_hasData (bit)Monday_DataAnd what I want to do is essentially pass in "Monday" as a parameter and rather than doing an If statement on each row, I would like to just like to do something like assign @dayCheck + "_hasData" to a variable and then use @dayCheck as part of my query. Is this possible or am I going to have to have 7 cases? Thank you for any input,Chance
View 2 Replies View RelatedHi all,
By using below query i can get no of tables having the give column name in a particular database,
SELECT COUNT(*) AS CounterFROM syscolumnsWHERE (name = 'empno')
but i want to know the table names too?
any one please suggest me how to find table names too......
In other words i know the particular column name and right now i want to know the table names in which this column name exists.
Hi,
I have a table in which out of 20 columns, there will be data only in a few columns. So, I need to find those column names which have data in them. I was able to do it using the information_schema and using a cursor to loop through all the column names and find out which columns have data in them. But i need to know if there is a more efficient way of doing this without using the cursor. Can somebody please let me know how this can be done without using a cursor? Thank you.
Can anyone help me with a SQL statement that will list all the column names in a table please ?
I just want to list out the column name so that i can develop asp/vb more effectively than having to use SQLEM and Design table to see the field names.:confused:
thanks
FatherJack
Hi is possible to create dynamic column name
example
Declare
@StartDate as dateTime
Select @StartDate = '2004-06-05'
select
SUM(Case When table1_date BETWEEN dateadd(day,-6,@StartDate) and @StartDate then 1 else 0 end)AS [dateadd(day,-6,@StartDate)],
SUM(Case When table1_date BETWEEN dateadd(day,-13,@StartDate) and dateadd(day,-7,@StartDate) then 1 else 0 end)AS [dateadd(day,-13,@StartDate)]
from
table1
I would like to pass into a stored proc the column names I want it to return; how do I do this please?
So I pass in say:
@p_AccountNumber with a value of 'AccountNum'
and the SELECT that the sp fires is of the form
SELECT AccountNum from AccountTable
Any help appreciated
thanx for the help in advance,
i have a table with Monday, Tuesday, Wednesday. .... Sunday
i get the weekday by
select @stat = datename(dw, getdate()) which in this case is Wednesday
but when i do something like
select top 2 * from myTable
where 'myTable.'+@stat = 1
which is as same as
select top 2 * from myTable
where myTable.wednesday = 1
i receive a syntax error. how can i dynamically select myTable.Wednesday ?
i also tried using
select top 2 * from Intercon
where '@stat' = '1'
but then this doesn't return anything where it should.
any help?
Is there a way that you could get the column names for each table in a database using 1 query?
something like:
tbl colname
t1 catID
t1 catName
t2 prodID
t2 prodDesc
t3 cartID
...
...
I know it would be long, but I would just be searching through the saved output for specific names.
Hi All,
I was wondering how would I get the column names from a table? Not the results just a listing of column names. What is the command to get this information? I am using MS Access, but I posted here because MS SQL is the closest thing on this forum and the syntax is usually similar.
Thanks a bunch.
Val
SQL server throws an exception when I try to run the following code:
ALTER TABLE contacts ADD default ntext NULL;
The reason for that is that "default" is an SQL keyword.
The way I handle this now is I put an underscore at the front:
ALTER TABLE contacts ADD _default ntext NULL
Is there a cleaner way to handle this, i.e. to keep the column name "default" and forse sql server to create a column with this name?
Thank you!
Morning guys,
I have a project where Iam suppose to script all columns in every database/table/columns on the network.
I figured the best way to do this would be using sql-dmo (Sql Server 2000)
Does anyone have any suggestions on getting started with this project?
thanks,
Jonathan