I am trying to replicate data from DB2/AS400 to SQL Server2005 (ENT edition) currently we use 3rd party tool to replicate data from DB2 to SQL Server2000 (ENT edition) and like to get rid of this 3rd party tool. I am searching for the last 3 weeks but didn€™t get a good starting point. I have linked DB2 to SQL Server2005 and can run queries against DB2/AS400 box. Now I want to set up transactional replication from DB2 to SQL Server 2005. I have read about peer to peer topologies but I don€™t know if that€™s the route I have to take?
So can someone please help me? I really appreciate your help.
Is there a good way to port data from an AS400 over to SQL server 2005? If anyone has any experience with this, can you tell me where to go to get info?
I am creating a migration tool that retrieves data from an AS400 and an SQL 7 server to create a new database in SQL 2005. I have managed to create a linked server in SQL 2005 to the AS400. I don't know if it works or not. I've been trying to create a linked server to the SQL 7 server with no luck. The AS400 and SQL servers are on the same network. The SQL 2005 server is hosted somewhere else. I have access to everything. The SQL 2005 server is running Workstation. I tried to use Integration Services but finally discovered it was unavailable to Workstation.
I have a simple SSIS package that I want to move data from SQL 2005 to DB2/AS400. In order to use OLEDDB destination, I installed HIS2004 that provides DB2OLEDB support.
For simplicity and testing purpose, I created a connection pointing to a SQL table that contains only one ccolumn "last_name" of type "nvarchar(50)". This is my source, I then created another connection using DB2OLEDB pointing to a table on DB2 that contains only one field "name" of type "GRAPHIC(50)". This is my destination and the connection works fine to DB2 database. When I run the package, it has type conversion error as follows:
[OLE DB Destination [34]] Error: An OLE DB error has occurred. Error code: 0x00040EDA. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E07 Description: "Data or literal value could not be converted to the type of the column in the data source, and the provider was unable to determine which columns could not be converted. Data overflow or sign mismatch was not the cause.".
If I manually assign a vaule to the "last_name" using the "Derived Column" task like "Hello John", it just works fine.
Anyone knows what went wrong? Did I miss anything here? Thanks.
As a FYI: DTS works great in moving data from SQL 2000/2005 to DB2.
I want to Import data from AS400 to Sql2005. From the Sql Management studio I invoke the Import Data wizard. For the source I connect to the ISereis system and for the Destination I select the Sql2005 Database , When I go to the next step i.e select source tables I get the error "An error has occured which the SQL Server Integration Wizard was not prepared to handle No error message available,result codeB_E_CANTCANCEL(0*80040E15).(System.Data)" .After this I am unable to proceed further. I am using client Access tool to connect to ISereis
Using SQL 7.0 I'd like to replicate just schema from DB on server A to DB on server B, then be able to replicate data only form DB on server B to DB on server A. I need help!!
Thanks for ANY information you can give me... ~Jepadria
Hi all, I have a issue need your great help. Would you please help to check it and tell mw how to fix this issue? Thanks.
*****All of softwares are English version**** Server: WIndows Server 2003 SP2 + SQL Server 2005 SP2 AS400: V5R4
Client : Winsows XP SP2 + SQL Server 2005 SP2 Client Access V5R4 Full Version. *****All of softwares are English version****
Issue: I have a file in the AS400 with Chinese characters and need to dowload to SQL Sever 2005 daily. In the SQL Server, I created a database and table which collection is "SQL_Latin1_General_CP1_CI_AS", and I modified one of field which collection is from "SQL_Latin1_General_CP1_CI_AS" to "Chinese_Taiwan_Stroke_CS_AS" (( the filed data type is "nvarchar" and the length is 42). That mean that field can display the Chinese characters correctly.
In the SSIS, 1.Craeted a OLE DB Source to get the data ( The field name is "CUST_CHINESE_NAME" and the length is 42) from AS400 2.Craete a Data Conversion to convert that field from "String" to "Unicode String[DT_WSTR]" (The new field name is "Copy of CUST_CHINESE_NAME") 3.Create a Data Conversion 1 to convert that field from "Unicode String[DT_WSTR]" to "String[DT_STR]" and code page is change to "950"(The new field name is "Copy of Copy of CUST_CHINESE_NAME") 4. Creatd a OLE DB Destination to get that convert data and input the SQL Server ( the filed data type is "nvarchar" and the length is 42).
When I execute that SSIS, I got the error message in the third step. **************************************************************************************************************************** [Data Conversion 1 [521]] Error: Data conversion failed while converting column "Copy of CUST_CHINESE_NAME" (487) to column "Copy of Copy of CUST_CHINESE_NAME" (544). The conversion returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Data Conversion 1 [521]] Error: The "output column "Copy of Copy of CUST_CHINESE_NAME" (544)" failed because truncation occurred, and the truncation row disposition on "output column "Copy of Copy of CUST_CHINESE_NAME" (544)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Data Conversion 1" (521) failed with error code 0xC020902A. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC020902A. There may be error messages posted before this with more information on why the thread has exited. ****************************************************************************************************************************
I am trying to connect to an AS400 to download data to a 64bit sql server 2005 server. I am able to do this easily by migrating existing sql2000 DTS packages but how do i do this is in an SSIS project creating the process from scratch? and how do i incorporate activex transforms like you could in DTS2000 into the trasnform with copy columns?
Please help i am slowly turning grey trying to get this to work.
I want to set up As400 DB as a publisher and the sql server 2005 as a subscriper, so that I can read some data from AS400 DB in sql server 2005 and every evening, I need the replicated data from AS400 to be refreshed.
Hi all, I am working at insurance company that using AS400 as it main server. All transaction data is already kept for about 10 years (or even more..). This data is growing larger from time to time, and after several upgrades (that cost a lot!), my supervisor has an idea to partly move the data from AS400 to SQL Server. (since the cost for upgrading sql server is cheaper than AS400).
So.. let say, we only want to kept data in AS400 from 4 years before until now (2004 – 2007), and the rest of data is kept in SQL Server.
So first, all transaction data from 1997 – 2003 is transferred to SQL and deleted in AS400. If user queried data and didn’t found the data in AS400, it will search the SQL, if data is found in SQL, then data is transferred back to AS400 and deleted in SQL.
I’m using SQL Server 2000 DTS (use HiT OLEDB) to transfer the data from AS400 to SQL and vice versa.
I wanna ask if anyone has done this before? What’s the difficulties by using this approach? (btw, I will implement the DTS using user control in vb.net)
Or anyone has a better solution to overcome this problem?
I need to have an automated process to read data from DB2/AS400 and feed it to SQL Server 2000. Has anyone done this before? Any suggestions how it may be done? I know my company doesn't want to spend a lot to do this.
We have a distributed Database in DB2 and SQL Server 2000. As the user updates/Inserts data to DB2 Database , the data need to be dynamically replicated to SQL Server. Please Let me know the best possible method of doing it. Thanks, Ravi.
Hello group,i am relatively new to SQL-Server database, but i have lots ofexperience with DB2 and Oracle Database. One of my tasks is setting upa replication between a Mysql-Database running on Linux and one of ourSQL-Servers.How do i achieve this ?If i understand the documentation correctly you have to program thereplication mechanism for yourself or you have to use some third partytool.Could anyone please outline, how to set up the replication mechanism(pointing me to some web-site should be enough) and also tell me ifthere is any third party tool.Thanks in advance and greetings from ViennaUli
I have a computer thats running XP 64 bit version. I want to replicate between SQL server 2005 and SQL server 2005 compact edition. But it doesn't works. So i looked for a solution and i came to: http://support.microsoft.com/kb/912430 This page is telling me:
You cannot replicate data from SQL Server 2005 to SQL Server Compact Edition by using the 64-bit version of IIS
Is that a problem that can be solved by not using a other Operating System?
Or can you maybe install a 32-bit IIS on XP 64 bit?
I am trying to create a linked server in SQL Server 2005 to show tables in our AS400. I made the connection, however, the tables are not showing up under the Linked Server name.
How do you get the linked tables to display in the Linked Server folder?
I was trying to set up a replication process to move data from SQL 2005 to DB2/AS400.
To get it started, I have create a simplest table (say, PERSON) on SQL 2005 server, and the same table (PERSON) on DB2/AS400. I have only one column SSN (of type int). I have journaled the table on DB2 end. I was able to have successfully configured publisher (on SQL 2005) and subscriber (i.e. a pushed subscription). I used transactional replication. And I also installed HIS 2004 to have DB2OLEDB ready. I was able to use query/insert/delete against table on DB2 based the linked server (that I created for testing purpose).
I did a lot of reading on this and my impression is that replicating to DB2/AS400 is supported from SQL 2005. But I always have this error from replication monitor. Can anyone enlighten me what was wrong.
A SQL error has occurred. Please consult the documentation for your specific DB2 version for a description of the associated Native Error and SQL State. SQLSTATE: 42710, SQLCODE: -601 (Source: MSSQL_REPL_DB2, Error number: -601) Get help: http://help/-601
A SQL error has occurred. Please consult the documentation for your specific DB2 version for a description of the associated Native Error and SQL State. SQLSTATE: 42710, SQLCODE: -601 (Source: MSSQL_REPL_DB2, Error number: -601) Get help: http://help/-601
We have a "main" SQL 2014 server who imports XML files using SSIS in a datacenter. In remote sites (which are warehouses), there is an instance of SQL 2014 Express. A merge replication is setup, as every operations done on each site must be "forwared" to the main database, as some XML files are generated as output for an ERP system.
Now, the merge replication replicate all the data to the server on each sites. But a specific site don't need the data of every other sites, only the data relevant to itself (which is the warehouse code). Is there a way to replicate only the data relevant to each individual sites to the subscribers? Or is there a better way than replication to accomplish this?
Hello, I have de same problem that you have to get data from AS/400 to SQL Server 2005 using the SQL Server Import and Export Wizard. Did you successfully? If yes how please?
I have used: IBM DB2 UDB for iSeries IBMDA400 OLE DB Provider, IBM DB2 UDB for iSeries IBMDARLA OLE DB Provider, IBM DB2 UDB for iSeries IBMDASQL OLE DB Provider, Microsoft OLE DB Provider for DB2
I am attempting to transfer a table from an AS400 to SQL Server 2005 through SSIS. I am using the IBM DB2 UDB ISeries IBMDASQL OLEDB Provider as the source connector. I have tried to set up the source connector using the Table or View option but it says that No Tables Could Be Loaded. I can specify an SQL command and it shows the columns and appears to set up correctly except for showing a warning indicating that it cannot retrieve the column code page information from the OLEDB provider. When I run the job, it fails with the following error:
I've been trying to use the integrations services to access AS400 data with almost no success. Any suggestions or help you can give me would be appreciated. Some of the issues I can't make sense of are the following.
I am trying to send a file from SQL 2005 back to our AS400 DB2 db. First time trying to get this to work in SSIS.
I have a couple fields that are datetime in SQL Server and see SQL server sees datetime fields from DB2 as string so I am converting them to Strings using derived columns. That part seems to work fine. Get no errors on that part.
The conversions seem like they are working but it is faling when it tries to send it to as/400. I get the following error: any ideas on what is wrong?
[OLE DB Destination [1569]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5029: Data mapping error on member DSSCNTL. ". An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5035: Data mapping error on member DSSCNTL. ". An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5035: Data mapping error on member DSSCNTL. ".
I even created a sql table with same field sizes as one I am sending to AS400 and its sucessful there. So seem like it mght have somthing to do with sending to AS400 but not sure what.
I have sql 2005 server in my local area and mysql server on internet..
How can replicate Ms SQL 2005 to MYSQL ? is that possible ? or any possible version this server ?
I try sql 2000 server for replication; publishing starting but then ı take "invalid cursor state " message. ı delete tables msrep7 in mysql then replication starts but if replication stop for any reason , ı must delete table again again...
When I execute the package in Debug mode, it works.
I then import the package into SQL Server 2005 and it is showing under Stored Packages --> MSDB - AS400Package
I can right click and Run Package from there and it works fine.
When I set the package up to run as a job, it fails. What I have noticed is that the Sign On that I use in the package shows that there was in "invalid login" after the job fails.
I hope I have this post in the right place and hope I have left enough information behind to help. If not let know what else I need to post. I have only been using Business Intelligence Development for a couple days and SQL Server 2005 for about a week or so. All of the SQL DTS packages that I have created seem to be working fine with their jobs as well as my stored procedures.
Hi everyone, I've recently been thrown into a DBA role (I've never done any DBA work except writing a few SQL queries), so please go easy on me if these are stupid questions. My first task is to find the best way to replicate data between two SQL Server production databases. The data is to come from Production DB #1 to Production DB #2 (for access by a different system). The data has to be super-close -- not necessarily real-time, but within a few minutes. So when data is updated in #1, #2 shouldn't be be lagged by more than 45 minutes (5-10 is ideal). There are hundreds of thousands of records.What would be the best way to do this? Are there options in SQL Server 2005 to do "differential" updates from DB1 to DB2? Or is that how "transactional replication" works? If we were to implement a "full recovery model", will this impact any sort of replication? Thanks.
Hi, there I have a situation here.... I have Production DB and Development DB in the same SQL7.0 box.... I want to update the data and SP from Pro. to Dev at least once a day... So this is my plan.
1. Back up(Pro.) and restore(Dev.) so I can have the same DB in the same box. 2. Using a Replication (Pulication and Subscription) ro update the data and SP. 3. Because DTS can not update the SP, I use the replication instead of DTS. I need to update the SP, too..(Front end is ACCESS and backend is SQL7.0 DB)
Is there any other methods or way to make ti happen... Any suggestion can help...
I have been trying to transfer some data from a file located in a AS400 Server to SQL , but the file has more than one Member Name. I'm not sure how to specify a different member name on the SQL query . Please help.
The name of the file is:
Library = MTGLIBP2
File Name = CHSAVQPL
Member Name = INS
this is the query I have so far but I still need to reference the Member Name
SELECT * FROM OPENQUERY(AS400PL,'SELECT * FROM mtglibp2.CHSAVQPL')
I created a SSIS package moving data from a SQL 2005 table to an existing DB2 table on AS400 using Microsoft OLE DB Provider for DB2.
When the package was run, it showed that rows were successfully inserted to DB2. However, the data didn't seem to be converted correctly. Most of the string values were inserted as unusual characters. Also any string values of digits were not inserted.
For example, 1.) a character field (char(1) or nchar(1) as I have tried both types) in SQL 2005 table with a simple value of 'H' was inserted into the DB2 table field of type "A" (alphanumeric) of length 1 as 'ç' and others letters were inserted as other unusual characters. 2.) A string value of '00100' in SQL Server is not inserted to DB2 table at all.
Later we found that the fields inserted with usual characters are difined as CSSID =65535. A few fields with correct data inserted have CSSID=00037.
Does anyone know why this happened and how to solve this to get the data inserted correctly in the DB2 table?
