Hi,
I am trying to use Enterprise Manager Wizard to create a new
Publication database but I got the following message.
Error 2812: Could not find stored procedure
MyDB.dbo.sp_MSadd_logreader_agent
There seems that some replication stored procedures.
Any help?
Thanks in Advance
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies View RelatedHi guys.
i had configured a merge replication betwen 2 server and i was running fine. but due to network problems my network admin has changed the ip address and name of the publisher, distributor and subscriber.
what i did. i just drop the publication and now i m trying to create a new one. but i cannt' able to create. i dont' know y.. this is the error i m facing..
Msg 208, Level 16, State 1, Procedure sp_addmergepublication, Line 239
Invalid object name 'dbo.sysmergepublications'.
Msg 21040, Level 11, State 1, Procedure sp_MSaddmergepub_snapshot, Line 65
Publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 208, Level 16, State 1, Procedure sp_changemergepublication, Line 205
Invalid object name 'dbo.sysmergepublications'.
When go to set up a new publication I get the below error:
TITLE: New Publication Wizard
------------------------------
SQL Server is unable to connect to server 'LEICS-DC1'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, ''. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
I am specfing the server name but it still brings back the same error, the message at the bottom also stats to try and connect to '' which of course is impossible.
This is a domain controller if that makes any difference, SQL 2005 SP2, Win 2003 STD.
Thanks
Hi Mate !
I was searching to enable replication publication on my SQL 2005 Express, but as far as I look, this feature don't seem to be included.
Am I, correct?
Is there a way to enable this fearture?
Thanks
Zak
After upgrading SQL Server 2005 with the recent service pack, I am unable to create a publication. When I right-click on [INSTANCE]/Replication/Local Publications and select "New Publication...," the mouse cursor turns into an hourglass, but the wizard never shows up, nor is any error displayed.
There is a logged error that's been showing up that may or may not be related. The error message is "Replication-(null): agent (null) scheduled for retry. Could not clean up the distribution history tables."
Any ideas on how we can restore replication functionality on our SQL Server instance?
:mad:
I have one Publisher! (SQL 2005)
Two Subscribers. (SQL 2005)
Each subscriber requires different row filter from the published tables.
So, i need to create Two publications for each subscriber for the same db.
When i setup first publication, and apply filters to published tables.
All goes fine.
As soon i create an other publication with same published tables but DIFFERENT row filter; the log reader agent fails!
The process could not execute 'sp_replcmds' on 'DB1'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20011)
Get help: http://help/MSSQL_REPL20011
Execution of filter stored procedure 2076702271 failed. See the SQL Server errorlog for more information. (Source: MSSQLServer, Error number: 18764)
Get help: http://help/18764
The Log Reader Agent failed to construct a replicated command from log sequence number (LSN) {0008443a:000003b5:003e}. Back up the publication database and contact Customer Support Services. (Source: MSSQLServer, Error number: 18805)
:confused:
I have tried to re-initialze the subscriptions and re-run snapshots but no luck.
As i remove the row filter from the second publication; log reader starts working fine.
Previously i was using Merge replication and all was going BUT, on very large DML on publisher, we use to receive deadlock errors on application.
I decided to use Tran repl instead because log reader reads the changes from tran-log instead of locking the published tables; NOW I AM STUCK!
Ideas please!!!!
I tried to drop a merge replication publication and it is giving me an invalid object name dbo.ms_mergeagents message. I tried to drop using:
SSMS
sp_dropmergepublication
sp_replicationdboption
I got the last two from Microsoft KB article 324401. The subscription was never created because it gave another error invalid object_name msmerge_subscriptions. I can create new publications but not drop the existing ones.
Please assist...
Is there an easy way to copy a replication publication definition from one server to another? In our environment we have a development environment, testing environment and soon a production environment. Right now keeping the replication definition between the development and testing environments is a manual process, are there tools that can do a diff on this or a way to keep this in sync?
For example when we change what information gets replicated in the development environment I need a way to propogate that change to the testing environment.
I know I can generate scripts from within SQL Server Management Studio, but it creates scripts very machine specific. So short of going through that and modifying the server names to match the different environments, is there a better way?
What's the relationship among replication, publication and subscription?
I want to create replication database, what things should I know first?
When running the create publication wizard, I get:
"Error 14294 - Supply either @Job_id or @Job_Name to identify the job"
I had pubs & subs set up, but things were erroring, so I tried deleting everything and wanted to start from scratch, but the last step in the wizard gets me stuck.
Is it ok to clear the tables in the Distribution database that have info from earlier attempts at setting things up ?
Is there a way to delete the distribution database & really start from scratch ?
I am at my wits end here. For Replication the Books Online clearly state:
"The option to allow transformations is set at the time you create a publication"
However, I cannot find any options that allow me to do this in the Create Publication Wizard.
Once the Publication has been created I see in the Properties in the Subscription Options tab that "Use DTS to transform data before distributing it to a Subscriber" is set to No and there is no way to change it.
Where am I going wrong?
I am having a problem with merge replication after recreating a publication. It is a simple two-way replication between two servers allowing applications to update data at both ends, i.e. 1 publisher, 1 subscriber for all tables except some junk ones. The problem started after I did the following:
1) I dropped and recreated the publication to allow for some changes to the database schema. These caused problems so I dropped the subscription and publication and restored the databases at each end from backups taken before we started.
2) When I created the publication again, it wouldn't let me use the same name as it thought the publication already existed. It let me use a different name instead.
3) Most things work OK but one of the tables is not replicating inserts from the subscriber to the publisher. There are no errors and no conflicts, other similar tables replicate OK. Inserts go across the other way OK.
4) I am getting replication conflicts on another table that says 'Unable to synchronize the row because the row was updated by a different process outside of replication'
I believe the problem is to do with the original publication details still being in the restored databases, so am looking to drop the publication & subscription, remove the remnants of the old publication, fix the data and recreate pub & sub. What do I need to do to get rid of the old replication data in the database?
Any help much appreciated.
Hi,
I am stuck when trying to create a new publication. I fill all the wizard tabs but when finishing I get that message (6 times, one for every table):
Code Block
SQL Server Management Studio could not create article 'applicationModules'. (New Publication Wizard)
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
This article cannot use the 'subscriber_upload_options' feature because the publication compatibility level is less than 90. Use sp_changemergepublication to set the publication_compatibility_level of publication 'testMR' to '90RTM'.
Changed database context to 'test'.
Publication 'testMR' has the following property: 'compensate_for_errors'. SQL Server subscribers below version '8.00.0858' will ignore this setting. (Microsoft SQL Server, Error: 21522)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21522&LinkId=20476
The error seemed pretty clear, so I end up doing:
EXEC sp_changemergepublication
@publication = N'testMR',
@property = N'publication_compatibility_level',
@value = N'90RTM'
and running the wizard again.
But I got the same error.
The link on the message take me nowhere.
and by googling for error 21522 I couldn't find any help at all.
Please, could anyone help?
Cheers
Hi,
is it possible to create a publication with SQL Server 2005 Express. I canīt seem to find it in Microsoft SQL Server Management Studio Express.
Do i have to install the full version? :(
Isnīt there any other option?
Thanks
SP
have upgraded to SQL Server 2005 from 2000 ( to 9.0.1399).
The database seems to be functioning in order, however - I am unable to crerate a publication in order to replciate the database.
I am using the New Publication Wizard and see the follwoing error:
TITLE: New Publication Wizard
------------------------------
New Publication Wizard encountered one or more errors while retrieving the list of articles on 'nld_tradeinvoicing'. The list of articles may not be complete.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantInitArticleList&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Invalid column name 'options'. (Microsoft SQL Server, Error: 207)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=207&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Could anyone help to pinpoint the casual factor behind this?
I wanted to schedule the transaction replication. How do I do it? Currently I have set up a transaction replication which runs continuously and synchronizes the changes with immediate effect.
I need to configure a replication which will gather logs from the publication once in a day.
Is there any possibility?
Hello.I am trying to use Transact SQL to prepare publication for replication (SQL Server 2000 SP4 and SQL Mobile). I can easily create publication, add filters etc. but there is one thing which I can't find : parameter which tells me subscriber type and allow me to change subscriber type for publication. I don't know where I can change (or even if I can change) this property.
If someone made publication for mobile devices and replication with filters,resolvers etc. will it be a problem to share experiences here? Maybe some sample code with script or something what will guide me. Thanks in advance. Maciej Wysocki
I'm trying to setup merge replication and get the following error from the snapshot agent after I've finished the 'New Publication Wizard'. This doesn't make sense to me as it is an automatic process. Also, it looks like it is complaining about a 'dbo.MSmerge_cont...' view which is a view created automatically for the merge publication.
ERROR MESSAGE:
The identifier that starts with '<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWC' is too long. Maximum length is 128.
FULL DETAILS:
Message: The identifier that starts with '<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWC' is too long. Maximum length is 128.
Command Text: IF OBJECT_ID(N'[<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWCS464</ServerName><LoginName>NT AUTHORITYSYSTEM</LoginName><UserName>dbo</UserName><DatabaseName>liport2_gts</DatabaseName><SchemaName>dbo</SchemaName><ObjectName>MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90</ObjectName><ObjectType>VIEW</ObjectType><TSQLCommand><SetOptions ANSI_NULLS="OFF" ANSI_NULL_DEFAULT="ON" ANSI_PADDING="ON" QUOTED_IDENTIFIER="ON" ENCRYPTED="FALSE" /><CommandText>create view dbo.MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90 as select * from MSmerge_contents where 1 = 2</CommandText></TSQLCommand></EVENT_INSTANCE>]', 'V') IS NOT NULL DROP VIEW [<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWCS464</ServerName><LoginName>NT AUTHORITYSYSTEM</LoginName><UserName>dbo</UserName><DatabaseName>liport2_gts</DatabaseName><SchemaName>dbo</SchemaName><ObjectName>MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90</ObjectName><ObjectType>VIEW</ObjectType><TSQLCommand><SetOptions ANSI_NULLS="OFF" ANSI_NULL_DEFAULT="ON" ANSI_PADDING="ON" QUOTED_IDENTIFIER="ON" ENCRYPTED="FALSE" /><CommandText>create view dbo.MSmerge_contAE2EB588ABFA4C13825D4D44CB2D50CB_90 as select * from MSmerge_contents where 1 = 2</CommandText></TSQLCommand></EVENT_INSTANCE>]
Parameters:
Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteAdHocQueryDiscardResults(String strQuery, SqlConnection connection)
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.GenerateSystemTableBcpFiles()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPostArticleFilesGenerationProcessing()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: 103)
Get help: http://help/103
Server XF4SWCS464, Level 15, State 4, Procedure , Line 1
The identifier that starts with '<EVENT_INSTANCE><EventType>CREATE_VIEW</EventType><PostTime>2006-11-09T09:56:48.390</PostTime><SPID>152</SPID><ServerName>XF4SWC' is too long. Maximum length is 128. (Source: MSSQLServer, Error number: 103)
Get help: http://help/103
I have an existing publication in sql 2012 with 2 articles, and then I add 2 more articles. After that when I generate a snapshot, will the snapshot be generated for 2 new articles only or for all 4 articles?
I remember adding 1 new articles to one existing publication with 150 articles and when I generated snapshot, it was generated only for 1 article. But I don't remember clearly.
Does it behave differently for small and large number of articles?
-----Table Proc Index Performance TSQL &&%$#@*(#@$%.......------------
I have transactional replication configured where the publisher and subscriber are on two different servers. Yesterday a database upgrade was carried out, and the DBA dropped replication by issuing sp_removedbreplication on the published database. The subscription is still set up.
I have two questions:
1 - What is the safest way to temporarily switch off replication without losing the publication or subscription? As far as I was aware (my replication knowledge isn't great), simply disabling the relevant agents would do the job.
2 - I now have the task of creating the publication again (fortunately we have a saved script). If I recreate this publication, will I be able to point the existing subscription at it?
I'm in a middle of a project where replication established between Oracle 8i and SQL server 2005. Now we need to drop one column from on of the tables replicated from Oracle side. My question : Is there anyway I can do this in Oracle and automatically reflected on SQL server? If not what is the proper steps to do it. Realy appreciate your fast response.
Regards
Hello all,
When I create a new database and replicate to it using BeginMonitoredBackgroundSync :
Code Block
public void BeginMonitoredBackgroundSync(string User)
{
CreateReplicationInstance(User);
repl.BeginSynchronize(
OnSimplifiedSynchronizeComplete,
SqlCeReplication_OnStartTableUpload,
SqlCeReplication_OnStartTableDownload,
SqlCeReplication_OnSynchronization,
repl);
}
private void CreateReplicationInstance(string User)
{
repl = new SqlCeReplication();
string host = repl.HostName;
repl.HostName = User;
string dbFilePath = "";
dbFilePath = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().GetName().CodeBase) +
"\" + repl.HostName + ".sdf";
string myConnectionString = string.Format("Data Source = {0};PWD = {1}", dbFilePath, sqlSettings.Items["SqlPassword"]);
repl.InternetUrl = dynamicsReplicationSettings.ReplicationSettingsItems["InternetUrl"];
repl.PublisherSecurityMode = SecurityType.DBAuthentication;
repl.Publisher = dynamicsReplicationSettings.ReplicationSettingsItems["Publisher"];
repl.PublisherDatabase = dynamicsReplicationSettings.ReplicationSettingsItems["PublisherDatabase"];
repl.PublisherLogin = dynamicsReplicationSettings.ReplicationSettingsItems["PublisherLogin"];
repl.PublisherPassword = dynamicsReplicationSettings.ReplicationSettingsItems["PublisherPassword"];
repl.Publication = dynamicsReplicationSettings.ReplicationSettingsItems["Publication"];
repl.Subscriber = "RemoteSubscription" + repl.HostName;
repl.SubscriberConnectionString = myConnectionString;
repl.ConnectionRetryTimeout = 120;
repl.LoginTimeout = 120;
repl.CompressionLevel = 6;
if (File.Exists(dbFilePath))
{
FileInfo info = new FileInfo(dbFilePath);
if (info.Length <= 20480)
{
File.Delete(dbFilePath);
repl.AddSubscription(System.Data.SqlServerCe.AddOption.CreateDatabase);
}
}
else
{
repl.AddSubscription(System.Data.SqlServerCe.AddOption.CreateDatabase);
}
primeConnection();
}
After the replication finishes, I dispose the replication object like so:
Code Block
void OnAsyncSynchronizeComplete(IAsyncResult asyncResult)
{
try
{
repl.EndSynchronize(asyncResult);
if (repl != null)
{
repl.Dispose();
repl = null;
}
if (ReplicationComplete != null) ReplicationComplete(this, true);
}
catch(Exception ex)
{
if (ReplicationComplete != null) ReplicationComplete(ex, false);
}
}
Then later, if I try to update, insert or delete to the database, the application will hang. I can read from it, but I cannot write. If I close the application down and open it back up without replicating, I will not get any lockups. It also will not hang up after any replications prior to the create replication. I think I am doing something wrong in the initial replication that is holding on to some connection to the DB causing it to lock up. Has anyone seen anything like this before?
Hi,
We have an issue with our replication configuration when viewed through replication monitor. Parameterised Filters and joined filters don't appear in the gui. However, when we script the publication all the filters are present.
This issue only seems to occur when we have a remote distributor.
I should also point out that we have a merge push topology that uses a custom RMO synchronisation component on a separate server to either the publisher or the distributor. Also all the databases in the topology are called the same name. This has caused us other issues relating to this topology in particular so I raise it here as well although I don't expect it to be the case in this instance.
Any help would be greatly appreciated in clarifying this matter.
I re-created a publication that was having problems and it gives this error when I start the snapshot agent from SQL Server Management Studio: I am stuck on how to resolve - any ideas?
"The publisher's identity range allocation entry could not be found in MSmerge_identity_range table. Transaction count after EXECUTE indicates that a commit or ROLLBACK TRANSACTION statement is missing. Previous Count = 1, current count = 2."
select * from MSmerge_identity_range returns 19 entries but I don't know how to fix.
I have tried deleting and re-creating but always get this error.
My other publications and subscriptions are working fine and I was able to create a new test publication that worked but can not get this one to work that worked fine up until today.
Any ideas?
Hello,
I want to create one more publication on a database (SQL Server 2005) that is already a publisher and has subscribers. The subscribers of the second publication will not be inserting new records so I will mark the articles (tables) as download-only.
Is there anything extra that I should take into consideration? Are there any side effects of this process?
Thanks in advance.
SilentOceaner.
Hi ...i am new to sql server replication, im using the sql server 2005.
I was configure the replication n publish a database , i wanna add a new subscription, but i am facing the follow error
You have selected the Publisher as a Subscriber and entered a subscription database that is the same as the publishing database. Select another subscription database.
How do i add another subscription database,since in my sql server has only 1 subscriber?
When I tried to restore backup of publication database, time taken for restoration is too long [ 4 hours]. The actual database restore takes only 20 minutes but the stored procedures used for cleanup replication takes the remaining time. Is the issue related to my environment or the cleanup replication stored procedure?
View 7 Replies View RelatedHi, everyone,
I am new in SQL server 2005. I had setup SQL server 2005 P2P replication. Somehow it did not work one of two way replication. I tried to delete the publication. However I could not do it. have the same problem. When I tried to delete the publication, I got the publication " " does not exist.[SQL server error: 20026]. I tried to use sp_droppublication, it gave me error "the database is not enabled for publication". Nevertheless, I can see the publication in MS SQL Management Studio and Publication monitor with OK status. I could not find the distribution database either.
Could you anyone has ideas to delete this publication? I am sorry I am not a programmer. Please give me more detail explanation if you can. Thanks.
I am attempting to drop a database (sales), however I receive this message: Error 3274 is "Cannot drop the database 'sales' because it is published for replication." Yet, I no longer have any publications in this database. It seems that there is some orphaned information related to a publication that existed. Any help would be great.
View 2 Replies View Related
I am using SQL express and Visual web developer on windows Vista.
When I try to create a new database the following message appears.
CREATE DATABASE permission denied in database master (error 262)
I log on to my computer as an administrator.
Help appreciated
Prontonet
Hi,
In my production box is running on SQL7.0 with Merge replication and i want add one more table and i want add one more column existing replication table. Any body guide me how to add .This is very urgent
Regards
Don
the subject pretty much says it all, I want to be able to do the following in in VB.net code):
{[If [table with this name] already exists [in this sql database] then [ don't create another one] else [create it and populate it with these values]}
How would I do this?