We have inherited a remote distribution db where the password has been lost. I would like to confirm that if you change the password in the distributor properties-->publishers--> administrative link password that the password will be changed on all publishers without having to resnap the publications?
View 3 RepliesI am not able to connect to Remote Distributor from Publisher using Administrative Link Password. I have configured the Distributor on 1 m/c and Publisher on another m/c. When i use the wizard to configure the publisher using remote distributor. I have also specified the same Admin Password link (distributor_admin) in the distributor m/c.
I am getting the following message:
TITLE: New Publication Wizard------------------------------
SQL Server could not connect to the Distributor using the specified password.
[URL]
------------------------------ADDITIONAL INFORMATION:
Connection to server [SANMENON] failed.OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "Login timeout expired".OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". (Microsoft SQL Server, Error: 21670)
[URL]
------------------------------BUTTONS:
OK------------------------------
SQL 2000.
If I have a server setup to use a remote server for replication distribution can I actually change which server is the distributor?
Example
Server1 has publications
Server2 is distributor for Server1's Publication
Server3 is new hardware
Can i Make Server3 replace Server2 as the distributor?
How can I do this?
Hi,
I am replicating a couple of SQL2K databases via transactional rep and remote 2K distributor to 1 SQL2K5 database.
I want the distributor to email me when/if any of the agents fail etc. In order to set this up, I think that I need the SQL Server service to use a domain account (from error messages that I have been getting). It is currently using a local system account (it was a test box in a previous life).
I have tried this briefly, and found that it lost the publisher details in the replication monitor. Can anyone tell me what the implications for changing the SQL server service user and password are? Am I going to have to tear down and rebuild replication? The SQL Server Agent is fine - I am trying to get the two services in sync.
I am setting up transaction replication in SQL Server 2012 with three individual servers for Distributor, Publisher, Subscriber, But I want to know how to set the folder for Snapshot agent like whether the folder should be a network shared folder or normal local folder.
View 4 Replies View RelatedWe are currently using continuous transactional replication from an OLTP type database to a Reporting database. We recently changed the 'sa' password for the first time since replication was introduced and now the Replication Log Reader job fails to start.
This is the error from the Job Log:
Message
2008-04-14 15:18:24.894 Copyright (c) 2005 Microsoft Corporation
2008-04-14 15:18:24.894 Microsoft SQL Server Replication Agent: logread
2008-04-14 15:18:24.894
2008-04-14 15:18:24.894 The timestamps prepended to the output lines are expressed in terms of UTC time.
2008-04-14 15:18:24.894 User-specified agent parameter values:
-Publisher OASV-SQL1
-PublisherDB georgiaoas
-Distributor OASV-SQL1
-DistributorSecurityMode 1
-Continuous
-XJOBID 0xCE146F975BC43043AB1ECBF42F801C43
-XJOBNAME OASV-SQL1-georgiaoas-1
-XSTEPID 2
-XSUBSYSTEM LogReader
-XSERVER OASV-SQL1
-XCMDLINE 0
-XCancelEventHandle 00000730
-XParentProcessHandle 0000075C
2008-04-14 15:18:25.034 Status: 0, code: 20015, text: 'Login failed for user 'sa'.'.
2008-04-14 15:18:25.034 Login failed for user 'sa'.
When we change the 'sa' password back to the previous value, we can start the Log Reader without issue.
We have tried restarting the SQL Server Agent process without success. We have not restarted the SQL Server process due to the server hosting production databases.
Any ideas?
Hi There
If i apply Sql Server 2005 SP1 to a remote distributor can i keep all publication and subscriptions intact?
I am hoping i simply stop all repl jobs on the distributor, apply SP1 and then restart the jobs.
Is this correct ?
Thanx
using SQL 2000,
Can you setup a SQL Cluster to work as a Remote Distributor? Would there be any challenges in doing this?
Hi,
Server A houses the Production DB which services an OLTP system. Transactional replication is configured on this server which has two subscribers - on two separate servers (servers B and C). The Distribution database currently resides on Server A (which is also the Publisher).
Server B is on the same LAN as Server A (on the same rack). I'm considering moving the Distribution database from Server A to Server B to offload some of the processing overhead from Server A.
Are there any gotchas/performance problems associated with having the Distribution database (remote distributor) and the Subscriber on the same server (server B) in a transaction replication topology?
Please advise or point me to the appropriate documentation - I haven't found anything that addresses this specific question...thanks in advance,
Smitha
MS recommends to use remote Distributor for mirroring. It looks like it will be a single point of failure. What are my options ? We can't mirror it, is failover clustering the only way to go (SAN being single point of failure) ? How would log shipping work, if I didn't get the very last completed transaction log fast enough to the other machine, so that recovered distribution database would be behind ?
Also, if distributor fails, would my transaction logs on publisher fill up the entire disk space ? Can it be stopped ?
Thank you.
Hi all,
I am having a problem now. I cannot drop my publisher and publication because i was uninstalled the remote distibutor before i disable al lthe publication. Now the remote distibutor no longer exist.
Can another one help me? Urgent!!
I am planning to have AlwaysON Availability Group setup between Server 1 and Server 2
Server 1 -->Publisher-->2014 SQL Enterprise edition-->Windows Std 2012 --> Always on Primary Replica
Server 2 -->Publisher(when DR happens)-->2014 SQL Enterprise edition-->Windows Std 2012 --> Secondary Primary
Server 3 -->Subscriber-->2012 SQL Enterprise edition-->Windows Std 2012 --> NOT involved in Always ON
Server 4 -->Subscriber-->2012 SQL Standard edition-->Windows Std 2012 --> NOT involved in Always ON
Server 5(VM)-->Distributor-->2012 Standard edition-->Windows Std 2012-->not involved in Always ON
i know Publisher and subscribers can be mix match of 2014 and 2012 rom the above scenarios can i use (VM)SQL2012 std. as Distributor ? while publisher is being SQL 2014 ent.?
I have 2 servers: #1 -- SQL 2005 SP1 publisher ; #2 -- SQL 2005 SP2 subscriber
originally I had #1 as pub and dist but dist but killing my CPU so I was in the process of moving the dist to #2... Got it all configured and when I tried to add #2 as a dist for #1 it fails when I get to the administrative password screen... It give me an error about how it cannot connect with the given password but under that is says linked server failed.
Since it mentioned linked server I tried to connect via the previous linked server to #2 and it failed... I cannot connect to #2 anymore from #1. I can login directly to #2 and I can use osql to connect to #2 but linked server does not work. I tried all drivers and many configurations...
Any ideas??
I was wondering if you could set up multiple distributors for one database?For example:Server A needs to publish data to server B so I set up server A's distributor as server B. Later Server A needs to publish data to server C so I want to set up the distributor for this replication to use server C.I don't think this is possible as you need to set up the distributor for the entire DB when its created not for each individual replication job.Any help is appreciated.Nick
View 1 Replies View RelatedI am having problem creating a distributor on my sever, when i do it thru the enterprise manager it defaults to another sever's path and when i put the severs path it dosen't find it.
and when i do it thru query analzer this is what i get
sp_adddistributor @distributor = 'vivian'
,@heartbeat_interval = 10
, @password = 'grants831'
-- , @from_scripting = from_scripting
The error message that we get is,
Server: Msg 6, Level 16, State 1, Procedure sp_adddistributor, Line 147
Specified SQL server not found.
Remote logins for remote server 'repl_distributor' have been dropped.
Server dropped.
Server added.
Server network name set.
and for this it is going to another server
sp_adddistributor @distributor = '158.72.80.48'
,@heartbeat_interval = 10
, @password = 'grants831'
-- , @from_scripting = from_scripting
error message
Server: Msg 18482, Level 14, State 1, Procedure sp_adddistributor, Line 147
Could not connect to server 'GEMS' because 'vivian' is not defined as a remote server.
Remote logins for remote server 'repl_distributor' have been dropped.
Server dropped.
Server added.
Server network name set.
Completed SQL 2000 Transactional Replication from distributor/publisher to Subscriber. (with identity problem solved)
NOW wizard disallows set up subscriber to publish back to the Distributor/Publisher. "Distributor not known" message on Subscriber server when we open configure Publisher-Subscriber tool.
Any experience using this wizard to set this up would be appreciated.
Hello, I have 3 servers sql 7 sp3, 1 editor, a distributor and an subscriber. the base on the editor is removed, how to make to remove all traces of replication on the distributor and the subscriber.
thank you. Pascal
Hello,I'm trying to set up transactional replication on two SQL2k Servers.Unfortunately I stuck on the following problem:I use 'Configure Publishing and Distribution Wizard' , I make one of theservers (publisher) its own distributor, then I set all the paths .Afterpressing 'Finish' button, the wizard tries to perform next step i.e.'Configuring Distributor' and I get the error:"Error 14114: '(null)' is not configured as a Distributor". Does anyone haveidea what I should do in order to solve the problem?I tried to run procedures manually, and I get exactly the same error when Itry to execute sp_adddistributondbThanks,Piotrek
View 1 Replies View RelatedWhat is the minimum SQL Server version I can use on my replication distributor server? My publisher and subscriber(s) will all be Enterprise Edition (64 bit). However, it seems awefully wasteful to put Enterprise Edition on a box that is just used for distribution. That's another $15K for a server that doesn't do much. Can I use a lower version (Express, Developer, Standard)?
Thank you,
Ben Wolf
Sorry for the odd format but that is what happens when you paste here! This is data from our Job History for a "Replication Distributor" Job Step Type. Here is how I interprete it: The job step started on the 19th. It restarted itself twice on the 20th. Then it restarted itself twice on the 21st. Then it restarted itself 3 times on the 22nd. And finally it restarted itself on the 23rd. Notice the progression of Retries_Attempted. When Retries_Attempted exceeds 10, the step will fail and the service will shut-down, which is what I have seen in the past. I conclude the Advanced Settings of Retry Attempts is not per "Event" but "total tries no matter how many successful retries are encountered." I thought a successful retry would reset the Retries_Attempted. But it does not. Is this correct? This implies that to keep the distributor up, we should set the Retry Attempts" setting to its max!
Status Run_Date Run_Time Run_Duration Retries_attempted
1
1/19/2007
44025
0
0
2
1/20/2007
31200
1429
1
2
1/20/2007
32729
234250
2
2
1/21/2007
31119
1558
3
2
1/21/2007
32817
234225
4
2
1/22/2007
31142
1513
5
2
1/22/2007
32755
508
6
2
1/22/2007
33403
233615
7
2
1/23/2007
31118
1503
8
2
1/23/2007
32721
501
9
Hello Guys,
I have the following scenario:
PC1 : located in Dubai representing my laptop
PC2: located in Denver ,
Both pcs are connected to each other via the internet as i am using Aliases ,they can both access and see each other using SQL Auth.
I want to implement Merge Replication to Synchronize TestDB ,
I have NO DOMAIN connnecting them.
I Created a new publication ,under security i asked the agent to use the Sa account to connect
When launching the rep monitor i get the following error:
"Replication Monitor could not connect to Distributor 'laptop'."
"Login failed for user ''. The user is not associated with a trusted SQL Server connection. (.Net SqlClient Data Provider)"
Both Publisher and Distributer are on my Laptop ,why cant they connect to each other?
Another Question : could i implement Traditional Merge replication to synchronize my DBs or do i need to configure Web Synch in Merge rep to enable connecting via the internet?!
Thanks Guys!
Moodi
What happens when Network Connectivity between Distributor & Subscriber
fails in Transactional Replication ??
Thanks,
John
We have a setup with one Publisher Server and 15 Subscribers with merge replication configured for all subscribers. The current Database size is approximately 3 GB expected to grow to 10 GB in next 1 year. We wanted to know what benefits would we incur if we add an additional seperate distributor server (hardware box). Also, what is the approx. size of a database where a seperate distributor server (hardware box) is recommended.
Thanks in advance
What I would like to do is set up transactional replication from server1 (Publisher) to server2 (Subscriber), with server2 acting as the (Distributor).
I am successful on server2 in allowing server2 as a distributor for server1. When I try to configure replication on server1 to use server2 as a distributor and subscriber I get this message once
"
SQL Server Enterprise Manager could not enable 'server2' as a Subscriber.
Error 14071: Could not find the Distributor or the distribution database fom the local server. The Distributor may not be installed, or the local server may not be configured as a Publisher at the Distributor.
"
and this mesage for each database I enable for subscription, I get this message.
"
SQL Server Enterprise Manager could not enable database 'x' for snapshot or transactional replications.
Error 20028: The Distributor has not been correctly installed. Could not enable database for publishing. The replication 'publish' of database 'x' has been set to false.
"
The last message I get is
"
SQL Server Enterprise Manager successfully enabled 'server2' as the Distributor for 'server1'.
"
This message is apparently false.
When I try to Configure Publishing, Subscribers and Distributing... on server1, I get the message
"
SQL Server Enterprise Manager could not retrieve information about the Distributor or the distribution database.
"
In an attempt to fix this I:
1. disable publishing on server1,
2. disable publising and distribution on server2.
3. enable publishing and distribution on server2.
4. enable publishing on server1 using server2 as distributor.
Again I get errors on step 4.
I have even tried re-installing SQL Server 2000 on server2 with no improvement.
Can some one please shed some light on this problem?
Thanks in advance.
We are going away from a 2003 Windows Server OS with SQL Server 2008 R2 to a 2012 Windows Server with 2012 SQL Server. Both the distributor and subscriber resides on 2003 Windows Server and the focus will be to migrate those databases to the 2012 SQL Server.
We would also like to avoid sending down a new snapshot due to logic in the replication process (major headache to clean up data). what's the best approach in moving the distributor and subscriber databases without having to run a snapshot?
In theory and needs testing:
1. Work with business users to get downtime
2. Stop sql apply so no new changes are going to the Oracle publisher database
3. Remove subscription, publication and distributor from current replication
4. Oracle DBA to clear out replication related objects - fresh clean slate
5. Use log shipping to apply last t-log and restore db with Keep_Replication
6. Set up new distribution, publication (keep existing object unchanged), and subscriber (without initialization) Will this work?
Hello,
Are there any requirements that dictate the SQL Server version for the distribution agent for a SQL 2000 publisher with a transactional push subscription to a SQL 2005 subscriber?
Thanks in advance,
John
Hello
I have server "123456" SQL 2005 On clustered environment. I added permissions to snapshot folder, it is on sharing for both nodes.
I got error during the set up as:
Microsoft.SqlServer.ConnectionInfo
Additional Information:
An exception occurred while executing a TSQL or Batch(
Microsoft.SqlServer.ConnectionInfo)
An error occurred during the execution of xp_cmdshell. A call to "Create Process" failed with error code 5
Destination path d:Microsoft SQL ServerMSSQL.1MSSQLData is not Valid. Unable to list directory contents. Specify a valid destination path
Changed database context to 'master' (Microsoft SQL Server, Error 15121)
The datafolder exists, sql cluster service account from domain added in to snapshot folder, administrators access also on this folder.
Please advice how to troubleshoot this issues. Thanks, Jay
I`m running SQL 6.5 with standard security. We`re running NT 4.0. I am a member of the NT Admin group - which, of course, has sa privileges in SQL Server. I changed the sa password (via Enterpise Manager on my client machine); and it worked. I tested the password change by connecting to ISQL/w - both on my client machine and at the server machine.
However, when I attempted to connect to the server via Enterprise Manager (SEM) - on my client machine - my login attempt failed. But at the server machine, I connected just fine.
Somehow, even though we`re using standard security, I`m getting locked out of SEM because of the new password. Changing the sa password back to what it had been resolved the problem; but the old password was only meant to be temporary.
Any suggestions or explanations?
Is there a thread that says what should we be looking for if I change password for SA?
I am new to the org here and have to clamp down on the SA logins.
This is what comes to my mind:
1.Client apps:
====================
a.Hard coded into VB apps
b.File DSNs
c.System DSNs
2.Web app:
================
a.Hard coded into .asp and .aspx
b..inc files that have collective connection strings.
c.Possible use of file DSNs
d.Possibly use of system DSNs
3.Ad-hoc Queries by Users
===============================
4.Maintenance Plans and Jobs etc.
=======================================
a. DTS packages
b. Replication
Is there anything else that you can add to this list will be helpful.
Regards
Paresh
Regards
Paresh Motiwala
Boston, USA
Is there any strategy I should follow in order to change the SA password.Experts answers only. Thanks
=============================
http://www.sqlserverstudy.com
After I have changed the SA password and attempt to login I get the following error.
A connection was successfully established with the server, but then an error occurred during the login process. (provider:Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error:233)
If I change the password back I can login without any problems. I need to change the SA password.
Thanks for any suggestions.
Hello all,
When I changed the SQL sa account password (it was blank) and then tried to connect to SMS remotely via SMS Administrator Console, I get Connection Failed. It seemed to work for a about 20 minutes and then I get "Connection Failed" when I try to run the console remotely. I used the SQL Enterprise Manager to change the sa password and then I used the SMS Administrator Console to set its SQL Server account to sa with the new password under Site Properties. When I switched it to a blank password in SQL and SMS, it started working again.
From the Application Event Log I seem to be getting a lot of these messages (even now - and it's working):
"The description for Event ID ( 1001 ) in Source ( SQLCTR70 ) could not be found. It contains the following insertion string(s): SQL Server not running."
I have also gotten: "The Open Procedure for service "NM" in DLL "nmperf.dll" failed. Performance data for this service will not be available. Status code returned is DWORD 0. "
I don't see any messages from SMS in Event Viewer.
What am I doing wrong?
TIA for you assistance.
Can the user change their password in Enterprise Manager? When they follow the documentation, this does not seem to work
unless they are sa: (I know about sp_password....we are trying to find a GUI method for typical user.)
Expand a server group; then expand a server.
Expand Security; then click Logins.
In the details pane, right-click the login to modify, and then click Properties.
In Password, on the General tab, enter a new password.
Confirm the password.