I am getting this error on replication and don't know why. Any ideas?
The process could not read file '\NJRARSVR00E9d$sqldatasystemMSSQL$P001ReplD atauncNJRARSVR00E9$P001_PTR_PTR20040707104224s napshot.pre' due to OS error 5.
Hi.everyone.I use two computer in workgroup.I use A to be a publisher and distributor ,B to a Subscrible.When i create a snop in A computer and Create snopshot in "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
epldataunc",when I use "view Synchronization Status" in B computer, the show "job already success start",but in A computer sqlserver error log show "Message
Replication-: agent LIUQINASERVER2005-TestTran-Tran-LIUQIANHOMEHOME-6 failed. The process could not read file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLReplDatauncLIUQINA$SERVER2005_TESTTRAN_TRAN20070409150285ame_2.pre' due to OS error 3.". The publisher snapshot agent is servernameadministrator.
I find a lot of message in internet ,but no one can help me .I try use same account and password in two computer.but no help.
Please tell me why and how to solve it ? Thanks.
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Everyday between 18:00 and 20:00 nearly 1000 PDA Subsriber anonymously
synchronise via Merge Replication and at least two time he have the error :
IIS Worker Process
Faulting application w3wp.exe, version 6.0.3790.1830,
faulting module sscerp20.dll, version 2.0.7331.0,
fault address 0x000110f4.
And subscriber which synchronising meanwhile becomes suspect.
Can someone offer a suggestion as to the cause of and correction for
this
error?
Thanks,
Hakan G
Here is some details about our system:
Client Side
OS: Windows Mobile 2003 4.21.1088
DB: SQL CE 2.0
Microsoft SQL Server CE (ssce20.dll) 2.00.4415.0
Microsoft SQL Server CE Client Agent (ssceca20.dll) 2.00.4415.0
Development Tools: VB.NET 2003
Service Pack: .NET Compact Framework 1.0 SP3
Server Side
OS: Microsoft 2003 SP1
Internet Information Services (INETINFO.EXE) 6.0.3790.1830
(srv03_sp1_rtm.050324-1447)
IIS Worker Process (w3wp.exe) 6.0.3790.1830 (srv03_sp1_rtm.050324-1447)
HW:IBM XSERIES_346 Intel(R) Xeon(TM) CPU 3.60GHZ (2CPU) 5,00 GB RAM DB:
SQL CE 2.0
DB:SQL Server Standart Edition 8.00.2039(SP4)
SQL CE Server 2.0
Microsoft SQL Server CE Server Agent (sscesa20.dll) 2.00.7331.0
Microsoft SQL Server CE Replication Provider (sscerp20.dll) 2.00.7331.0
Merge Replication Properties
-----------------------------
status : 1
retention : 21
sync_mode : 1
allow_push : 1
allow_pull : 1
allow_anonymous : 1
centralized_conflicts : 1
priority : 100.0
snapshot_ready : 1
publication_type : 1
enabled_for_internet : 0
dynamic_filters : 1
has_subscription : 0
snapshot_in_defaultfolder : 1
alt_snapshot_folder : NULL
Merge Agent Profile:
parameter_name value
-------------------------------- ---------
-BcpBatchSize 100000
-ChangesPerHistory 100
-DestThreads 4
-DownloadGenerationsPerBatch 500
-DownloadReadChangesPerBatch 500
-DownloadWriteChangesPerBatch 500
-FastRowCount 1
-HistoryVerboseLevel 1
-KeepAliveMessageInterval 300
-LoginTimeout 15
-MaxDownloadChanges 0
-MaxUploadChanges 0
-MetadataRetentionCleanup 1
-NumDeadlockRetries 5
-PollingInterval 60
-QueryTimeout 300
-SrcThreads 3
-StartQueueTimeout 300
-UploadGenerationsPerBatch 100
-UploadReadChangesPerBatch 100
-UploadWriteChangesPerBatch 100
-Validate 0
-ValidateInterval 60
Hi All,
I am reading multiple XML file and i am using for each loop to get file name. these xml files are create by other process.
If file is in use then i will get following error .
[Read XML file] Error: The component "Read XML file"
was unable to process the XML data. There is an unclosed literal string. Line 1300, position 26.
i know that this error is coming because file is under process but i want to skip reading file which is reurning error. i don't want to read any data from this file.
In Data flow task i am using following steps
1. Reading file through XML Source
2. inserting data through script component task.
Would you please help me?
Thanks in advance..
From
Manish Jain
hi
i have a problem with reading sql mobile database existed on the pc
i made a sql mobile database connection with ( Add New Datasource ) and then set
the datasource of dataviewgrid to display the returned dataset .
at run time i have an exception said :
cann't find the library with the name sqlceme.dll as i remember ,
can you help me solving this problem because i very need this step , please ?
regards
Hi,
In the integration services package i'm working on i connect to an excel database and have two data flows which deal with two work sheets in the excel spreadsheet. The data flows do some transformation and then write the data out to a SQL database (two differnet tables). This is all working great however what i want to do once both data flows are complete is to move the directory which contains the current file that is being looped through. At present there is a foreach loop going through a number of directories. I have tried to implement the File System Task object to move the directory but get the following error:
[File System Task] Error: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I've read a similar post where by the problem was due to not closing the excel connection before doing the File System Task. I cannot seem to find where i would be able to do this.
If anyone has any ideas i'm looking forward to hearing them.
Many thanks in advance,
Grant
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. § Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies View Relatedi'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
I was given a 2 GB XML file without an XSD. I need to find the element names. I know how to do that using openxml but it takes forever on a file this large. Is there a faster way to do it using xquery?
View 0 Replies View RelatedDear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
hi, I have not done any replication process before . but I am trying to learn it . so I have the sql server reside in a window NT4.0 (first NT server )and I am using window workstation which has a client utility to manage the database. What I am thinking to do is to have a nother pc that has a window NT4.0 (second NT server) and sql server 6.5 installed. so what is my question.
Can I control the replication process from the workstation by using the utility tools to replicate the database from the first NT server ( source database ) into the second NT server
thanks
Ali
I need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?
I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
Hello Experts,
I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle).
PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not..
What should go here ?
->Under Class A
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser, IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
{
//Some code to read file and write it into new file
return DTSExecResult.Success;
}
public const string Property_Task = "CustomErrorControl";
public const string Property_SourceConnection = "SourceConnection";
public void LoadFromXML(XmlElement node, IDTSInfoEvents infoEvents)
{
if (node.Name != Property_Task)
{
throw new Exception(String.Format("Invalid task element '{0}' in LoadFromXML.", node.Name));
}
else
{
try
{
_sourceConnectionId = node.Attributes.GetNamedItem(Property_SourceConnection).Value;
}
catch (Exception ex)
{
infoEvents.FireError(0, "LoadFromXML", ex.Message, "", 0);
}
}
}
public void SaveToXML(XmlDocument doc, IDTSInfoEvents infoEvents)
{
try
{
// // Create Task Element
XmlElement taskElement = doc.CreateElement("", Property_Task, "");
doc.AppendChild(taskElement);
// // Save source FileConnection
XmlAttribute sourcefileAttribute = doc.CreateAttribute(Property_SourceConnection);
sourcefileAttribute.Value = _sourceConnectionId;
taskElement.Attributes.Append(sourcefileAttribute);
}
catch (Exception ex)
{
infoEvents.FireError(0, "SaveXML", ex.Message, "", 0);
}
}
In UI Class there is OK Click event.
private void btnOK_Click(object sender, EventArgs e)
{
try
{
_taskHost.Properties[CustomErrorControl.Property_SourceConnection].SetValue(_taskHost, propertyGrid1.Text);
btnOK.DialogResult = DialogResult.OK;
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
#endregion
}
Hi guys.
View 1 Replies View RelatedI have a filetable that contains a binary file. I need to do a selective read of the file stored in the file table. I can write a C# CLR function that will open the file, read n bytes the from a starting byte. Or I can write a SQL statement that reads the stream in the filetable into a VARBINARY variable using SUBSTRING beginning at the starting byte (offset from 1) for the same n bytes.
Both give me the same result. However, the SQL statement takes considerably longer to read. I know there is overhead in reading through SQL (interpreted language), but the difference in performance is substantial, and I can only attribute this performance degradation if SQL first tries to "load" the entire stream before it identifies the portion of the stream that it needs to read beginning at the starting byte offset.
I wonder if this is the case or if there is another option to read a stream from a filetable directly through SQL queries that is more efficient.
Unable to open the physical mdf file or log file because it is being used by another process
I am trying to write a Windows Application using ASP.NET 2.0, C#2005 EXPRESS, and SQL 2005 EXPRESS.
I had followed the introductory video to create a connection to the Database using Windows Authentication, and use the wizard to create a dataset and checking all the tables in the database.
After that I dragged a table from the data source created from the above process. The Details Grid so created is able to perform update, delete and addition of records.
But when I went back to the database at my PC I wasn€™t able to connect to the database. And if I opened the database first and then load the windows application and perform some database operations and went back to the physical database I wasn€™t able to open the tables in the database.
The error message is that the physical database connection cannot open the .mdf file or log file because another process is using the database. I guess it refers to the Windows Application.
Is this normal? Will it have any implications after the application is deployed? I suppose that there isn€™t a scenario where a Windows application and a physical process will access the database at the same time.
Will appreciate some feedback and advice on this scenario and whether it is a problem.
Thanks and regards
OldStd
I am wondering how easy is to check for file locks and have our SSIS Package to wait until file has been release by the process which is using it.
Also, same question when we're writing to a Flat File (or Flat File Destination).
Thanks,
The process could not execute 'sp_repldone/sp_replcounters' on 'sqldb2008'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20011).The specified LSN {00000000:00000000:0000} for repldone log scan occurs before the current start of replication in the log {001317bf:0000f736:0008}. (Source:Â
MSSQLServer, Error number: 18768).The process could not set the last distributed transaction. (Source: MSSQL_REPL, The process could not execute 'sp_repldone/sp_replcounters' on 'sqldb2008'. (Source: MSSQL_REPL, Error number: MSSQL_REPL22037)
Hi guys.
i had configured a merge replication betwen 2 server and i was running fine. but due to network problems my network admin has changed the ip address and name of the publisher, distributor and subscriber.
i just want to delete all the publication and subscription.. but i cannt' do this.. i m getting some sql server error..
is there any command that i can execute to reset the replication process that will delete all the publication and subcription. and then i create a new publication and subscription
Thanks and looking forward.
-malik
Hi All,
I need to read a csv file, which is in remote server using SQl Bulk Insert Command.
Can I read a file Which is in remote server using BULK INSERT.
Thank you.......
Using SQL CE 3.1 merge replication. Working fine, but want to make subscription read only. In other words, master/slave pattern.
How is this accomplished?
Hi,
I am trying to replicate a production database server,on sql server 2000 at a particular geographic location to a new failover database server on sql server 2000 in a different geographic location via internet. The intention here is to use the failover database during times when the production server is down or busy and the synchronization needs to be sceduled for every 10 min.
It will be of huge help if any expert could give the detailed process involved and any precautions that need to be taken. I also need to keep inmind to use the ever/odd sequence number generator during the replication implementation.
Also, Whether to use row-level or column-level tracking?
thanks
SV
One of our users tried to set replication solution in a sqlserver (the idea was given up).
SQL Server added in each table a column related to replication.
We want to remove theses columns and I used the following script :
select 'ALTER TABLE dbo.'+object_name(id)+' DROP CONSTRAINT '+object_name(constid)+' GO'
+'ALTER TABLE dbo.'+object_name(id)+' DROP COLUMN '+'msrepl_tran_version GO'
from sysconstraints where object_name(constid) like '%msrep%'
Question:
1. I want to know how to introduce a carraige return in order to have some thing like this :
...
ALTER TABLE dbo.T_CommandCopyFile
DROP CONSTRAINT DF__T_Command__msrep__44AB0736
GO
ALTER TABLE dbo.T_CommandCopyFile
DROP COLUMN msrepl_tran_version
...
2. Is there any other solution to do this more simply ?