Replication :: Process Could Not Set Last Distributed Transaction
Apr 29, 2015
The process could not execute 'sp_repldone/sp_replcounters' on 'sqldb2008'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20011).The specified LSN {00000000:00000000:0000} for repldone log scan occurs before the current start of replication in the log {001317bf:0000f736:0008}. (Source:Â
MSSQLServer, Error number: 18768).The process could not set the last distributed transaction. (Source: MSSQL_REPL, The process could not execute 'sp_repldone/sp_replcounters' on 'sqldb2008'. (Source: MSSQL_REPL, Error number: MSSQL_REPL22037)
View 2 Replies
ADVERTISEMENT
Feb 29, 2008
We have a test db, a staging db and a live db. I have a stored procedure that runs fine on test and staging, but throws the following error on live.
The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
The stored procedure uses linked servers and a transaction.
We're using the following transaction code in the stored procedure
BEGIN
BEGIN TRANSACTION
BEGIN TRY
---
procedure stuff here
---
COMMIT TRANSACTION
END TRY
BEGIN CATCH
DECLARE @ErrorSeverity INT, @ErrorNumber INT, @ErrorMessage NVARCHAR(4000), @ErrorState INT
SET @ErrorSeverity = ERROR_SEVERITY()
SET @ErrorNumber = ERROR_NUMBER()
SET @ErrorMessage = ERROR_MESSAGE()
SET @ErrorState = ERROR_STATE()
IF @ErrorState = 0
SET @ErrorState = 1
RAISERROR ('ERROR OCCURED:%d', @ErrorSeverity, @ErrorState, @ErrorNumber)
IF XACT_STATE() < 0
ROLLBACK TRANSACTION
END CATCH
END
I found the following link which seems to be the problem we're experiencinghttp://support.microsoft.com/kb/937517
The link includes a workaround which is the following:
"To prevent the SQLNCLI provider from sending an attention signal to the server, use the SQLNCLI provider to consume fully any rowsets that the OLE DB consumer creates. "
How do I use the SQLNCLI provider to fully consume any rowsets?
View 11 Replies
View Related
May 31, 2008
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
View 1 Replies
View Related
Feb 22, 2007
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
View 3 Replies
View Related
Feb 6, 2007
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
View 1 Replies
View Related
Dec 22, 2006
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
View 8 Replies
View Related
Jan 8, 2008
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
View 2 Replies
View Related
Oct 10, 2005
Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)
View 10 Replies
View Related
Nov 14, 2007
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
View 4 Replies
View Related
Feb 14, 2007
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
View 1 Replies
View Related
Jan 6, 2012
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
View 2 Replies
View Related
Feb 1, 2007
Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit
View 2 Replies
View Related
Sep 28, 2004
Hi all,
I am trying to merge data of 2 tables on different servers with an insert statement.
INSERT INTO SERVER1.db.owner.table
select s2.* from SERVER2.db.owner.table as s2
LEFT JOIN SERVER1.db.owner.table as s1
ON s1.key=s2.key
where s1.key is null
I got this error.
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
while the select query is giving the result.
I have done simmilar inserts on some other tables which worked fine
I have created sp_addlinkedserver.
and DTC set on both servers.
any help will be greatly appreciated
View 3 Replies
View Related
Dec 27, 2004
Hi All,
I am trying to use distributed transaction (using linked Server).
But getting the folloing error..
Some one please help...
following is the error...
The operation could not be performed because the OLE DB provider 'MSDASQL' was unable to begin a distributed transaction.
[OLE/DB provider returned message: [Microsoft][ODBC SQL Server Driver][SQL Server]Transaction context in use by another session.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' ITransactionJoin::JoinTransaction returned 0x8004d00a].
View 7 Replies
View Related
Jul 11, 2006
Hi again,
I do not know when to use Distributed Transaction.
Would you please give an example about its usage or give a tutorials about this ?
Thanks
View 14 Replies
View Related
Mar 15, 2007
i am inserting new record in linked server and i need to get the id (which is of course autonumber) of newly added record. can't i get it using SCOPE_IDENTITY( ) ? SCOPE_IDENTITY( ) seems to be returning null. so SCOPE_IDENTITY( ) doesn't work in distributed transaction?
View 2 Replies
View Related
Mar 28, 2006
Hi:
When I tried to run a remote proc (with one parameter of date to return a set of records (no problem in return records) and to insert to the local database table A, with following errors:
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
SET XACT_ABORT ON
BEGIN DISTRIBUTED TRAN
insert tblA(column1, column2, column3)
exec [remoteServerB].DBX.dbo.usp_XYZ '03/28/2006 '
COMMIT TRAN
Both remote SQL and Local SQL are SQL2000 with sp4 and both Distributed Transaction Coordinator are on.
Any idea? :rolleyes:
thanks
David
View 2 Replies
View Related
Jun 11, 2002
Hello,
I've got stuck trying to run distributed transaction on same machine with two SQL instances. ()
Running transaction from Query Analizer With SET XACT_ABORT ON it works fine.
(Without that - it throws an error about unable to begin nested distributed transaction).
But from Application (C++, ODBC) it waits for a while and throus an error: 'unable to begin distributed transaction' even SET XACT_ABORT ON is applied before issuing transaction in Stored Procedure.
What's happening here ?
Thanks in advance.
View 1 Replies
View Related
May 10, 2006
I’m attempting to insert the result set from a remote query into a local table and I’m getting the following error:
Msg 8501, Level 16, State 1, Line 1
MSDTC on server 'REMOTESVR' is unavailable.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d01c].
Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
MSDTC is running on both servers. Has anyone ever seen this or have any insight into the cause?
The code that I’m trying to run is:
create table msver
(
[Index] int,
[Name] varchar(30),
Internal_Value varchar(20),
Character_Value varchar(512)
)
insert into msver
exec ('exec [REMOTESVR].master.dbo.xp_msver')
Note that the remote query works fine.
Thanks!
Eric
View 3 Replies
View Related
Mar 9, 2004
Hi, I have configured a linked server, and i have a procedure which makes an UPDATE in a local table using the data in the linked server.
Specifically, I have a function which checks if a given code exists in a linked server's table. The UPDATE changes the value of a column in a local table, if the function returns 1.
I've run the procedure and it gave an error after a few hours cause a simple conversion error inside the function. I solved the error. After this, the procedure did not work more. It gives me the following message:
Server: Msg 7391, Level 16, State 1, Procedure EXISTEONC, Line 16
The operation could not be performed because the OLE DB provider 'MSDASQL'
was unable to begin a distributed transaction.
(EXISTEONC is the function, and in the line 16 there is an OPENQUERY)
Im sure MSDTC is working... i'm lost because i dont know why it worked the first time and not now. Ive also wrote the function again as it was before, but it still doesent works.
Thanks a lot...
View 6 Replies
View Related
Jan 13, 2014
I was getting this error message from our Cold Fusion application front end when it was trying to execute one of our stored procedures.The operation could not be performed because OLE DB provider "SQLNCLI10" for linked server "SERVERNAME" was unable to begin a distributed transaction.
I was a bit puzzled by this because we don't use distributed transactions (at least I don't specifically code them). I did some research online and I found out how to modify the DTC component on the server to have the proper configurations.Then, when trying again we got this error message:
Unable to start a nested transaction for OLE DB provider "SQLNCLI10" for linked server "SERVERNAME". A nested transaction was required because the XACT_ABORT option was set to OFF.
So, I was able to resolve that as well by changing that option in the stored procedure...Now, there are 3 stored procedures - One does inserts; one does updates; and one does deletes.The actions are being done to a view in a database on another server. The view definition uses a linked server.
The error was/is only happening on the INSERT stored procedure. So, I'm a little baffled as to why it only bombs on the insert stored procedure and not the others. They are all coded in the same fashion..Do distributed transactions work differently if its an insert vs. update or delete? Why is it all of the sudden treating these as distributed transactions when they aren't coded as such?
The code is very simple and looks just like this:
INSERT vw_Name
SELECT bla, bla2, bla3
FROM local table
WHERE bla bla
And again vw_Name would be a table on another server that we have via Linked Server. It is also a SQL Server (but its SQL 2000).
View 6 Replies
View Related
Aug 29, 2006
I'm having problems with distributed transactions. I know this has been descussed a lot before, but i haven't been able to solve my problems anyway.
So, what do I try to do? I try to recieve data from one server (source) to a destination server with an integration services package using a transaction. The source server is a Windows 2003 server running SQL 2000. The destination server is a SQL 2005 Cluster on Windows 2003 Server. Both machines has MSDTC running and allowing both inbound and outbound transactions. I have run DTCPing and DTCTester successfully in both directions.
A bit simplified, my SSIS package looks like this.
Execute SQL Task (Delete old data on the destination server)
Data Flow Task
Get data from source using an OLE DB Source
Write data to destination using an OLE DB Destination
This works just fine if I in my topmost container set TransactionOption to supported, but if I change it into Required, my package fails with the error message:
Error: The SSIS Runtime has failed to start the distributed transaction due to error 0x8004D01B "The Transaction Manager is not available.". The DTC transaction failed to start. This could occur because the MSDTC Service is not running.
Could the fact that the destination is a cluster be a prolem here? I'm pretty sure I have successfully done operations like this in other environments, but without clusters involved.
Oh, one last thing. No firewall what so ever is runnig on or between the servers.
regards Andreas
View 4 Replies
View Related
May 15, 2008
Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.
View 1 Replies
View Related
Jun 20, 2008
I have this code
DECLARE @tempTableName VarChar(50)SET @tempTableName = NEWID()
CREATE TABLE #@tempTableName( State Char(2), Billed Money, AslCode VarChar(10))INSERT INTO #@tempTableName EXEC GetRecords '2/1/2008'
which gives me this error when I run
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
GetRecords does a select * from a linked server's table. Which is working fine but if I try to do an insert (into temp table) then I get the error.
Any help?
View 1 Replies
View Related
Jul 17, 2005
-- I made local procedure:
View 3 Replies
View Related
Jan 7, 2002
Hi,
There was a distributed trasaction set up and functioning fine, But gave the following error recently.
The operation could not be performed because the OLE DB provider 'SQLOLEDB' does not support distributed transactions
[OLE/DB provider returned message: Distributed transaction error]
Could anyone please help why is this error and how can be rectified.
Thanks in advance
John Jayaseelan
View 1 Replies
View Related
Mar 17, 2000
SQL Server version 7.0 (Service Pack 1)
When trying to start the Distributed Transaction Coordinator through Enterprise Manager, the following error is returned:
An error 1068 - (The dependency service or group failed to start) occurred while performing this service operation on the MSDTC service.
Any ideas?
View 3 Replies
View Related
Nov 2, 2005
i have two remote servers connected to each other through the linked servers.
i can run querries or even perform inserts as far as its not inside a transaction
but when i am trying to run distribted transaction but it keeps on returning the same msg.
Server: Msg 7391, Level 16, State 1, Line 3
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
i have configured the firewall, made sure the DTC service is started on both and enabled. they both have the same Sp packs, same config.
View 2 Replies
View Related
Jul 23, 2005
Hi all,I would like to perform anINSERT INTO LINKEDSVR.dbo.xyz.abcSELECT ... FROM dbo.dfgwhere LINKEDSVR is a linked server on another machine. Both servers arerunning SQLServer 2000 and have the DTC running.When I run this batch from QueryAnalyzer without explicitly usingtransactions, it works well (takes about 5 sec) - however, when Ienclose it usingbegin [distributed] tran/commit tranthe query runs forever.I also tried to use the local server as linked server (loopback) but itdid not work either.Any suggestions?Thanks,Jo
View 2 Replies
View Related
Oct 11, 2007
Hi!
I have crl stored procedure with distributed transaction in it. I really need such transaction. When a poison message occurs 5 time my queue is turned off.
I've read about handling poison messages in msdn (save transaction and rollback part of it), but it works only with local transaction. What should I do?
An important point is that messages shoold be processed in right order, I can't receive message and put it to the end of queue.
I want to try process poison message constantly.
I doesn't want to stop receiving messages in that queue.
Thanks.
kostya
View 1 Replies
View Related
Dec 14, 2006
I have a stored procedure in SQL2005 that queries and updates a linked oracle server. The sp runs fine from Management Studio, but when called by a CLR trigger I get the following error message:
Command attempted:
if @@trancount > 0 rollback tran
(Transaction sequence number: 0x000000000000000032DD00000000, Command ID: 1)
Error messages:
The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE_LINK" was unable to begin a distributed transaction. (Source: MSSQLServer, Error number: 7391)
Get help: http://help/7391
The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE_LINK" was unable to begin a distributed transaction. (Source: MSSQLServer, Error number: 7391)
Get help: http://help/7391
A .NET Framework error occurred during execution of user defined routine or aggregate 'PriorityTrigger':
System.Data.SqlClient.SqlException: The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE_LINK" was unable to begin a distributed transaction.
Changed database context to 'pims'.
OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE_LINK" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
System.Data.S (Source: MSSQLServer, Error number: 6549)
Get help: http://help/6549
Any thoughts or direction appreciated
Richard
View 4 Replies
View Related
Nov 23, 2007
I'm designing a DW, and i have some doubts relative to the Distributed Transaction when modeling a star schemma.
My problem is: I have a main dtsx package in wich i call all the child packages in order to create the (Fact and Dimension Tables).
(1) First i have several child packages that create and populate all the Dimension Tables (with the latest values from the relational DB).
(2)Then i have several child packages that create all the fact tables, in this process i use the surrogate keys from the dimension tables (obtained in step 1).
The problem here is , " How do i use the multiple transaction ?" , if i put a "required" Transaction Option on the parent package, then after calling the child packages that creates the dimension tables. The values are not commited, so they are not available when i later execute the childs packages related with the fact tables.
How can i use transaction when modelling a star schemma, in order to have a full roll back or a full commit in all tables (Dimensions and Fact Tables).
Thanks
View 6 Replies
View Related
