Hi Everyone!
I have a strange issue in my replicated databases.
I've a 5 merge subscribers replication schema. Our client discover a row that isn't matching with another database.
After some research it seam that the correct row is only at one database and all other database, have a the same row in a incoherent status.
Anyone have a idea on how this could happen?
I'm clue less right now
Thanks!
A set of tables are published for replication, when I have to unpublish the tables in order to update their structures (i.e. drop and recreate), an error comes up to say that the tables are still marked for replication. I check sysarticles and no tables are listed and even if I completely take the database off of replication, still there are problems. I have looked at the stored procedures that publish/unpublish the selected articles and see that a bit in sysobjects.category is set/unset by a constant of 32. But when unpublishing, it is like this does not work. I have to go into the sysobjects table renumber the category number and try again to drop/recreate and still the problem occurs, so I have to do this once more and then it will work. VERY FRUSTRATING and TIME CONSUMING. I find it hard to believe that this is how to maintain this. Does anyone have any ideas? I unpublish the articles through the replication interface, so it should work.
HELP PLEASE!!
I have 3 SQL databases: A, B and C. A and B are branch databases while C is the central (HQ) database. A & B will be constantly updated while C will updated occasionally and usually will be used for reporting/data browsing. Even though A & B are from different branch, they do have share some data records.
Every day, I will have to sync A & B's new/updated data to C and C to A/B. I know I can use Replication but I can't. You see, A & B are located in our own branch server while C was hosted on a third-party server. The webserver provider for C would not allow me to do any Replication on C.
What other alternatives that I can use to synchronise all 3?
DTS? XML transfer? It looks as if I have no choice but to write my own sync scripts? :((
Anyone has encountered similar situations? Any recommended SQL Tool programs?
Please help. I'm at a loss of what Im going to do.
Hi Guys,
I have tried backing up the replication from Primary Server (Publisher) A and copying over to Subscriber B. When I sync. I am missing the data. I don't know what step I am missing or it is bug on SQL 2K SP3.
I don't know what i am doing wrong.
Can anybody give me a step by step detail how to backup the publisher database and copy to a subscriber and sync by saying the schema and data already available. As we have WAN problem all the times, and when I try the full snapshot of 20 gig it was taking more than 24 hrs and also if the connection fails my snapshot also fails
Please help.
Thanks in Advance,
-Anu
Hi Guys,
I tried all the ways ,no good result.
I am really running out of time.
Can somebody please help.
-Anu
On windows XP there is a Synchronize program in Accessories. When I run our replication scripts on a SQL Server Express on the XP machine and start the Synchronize program there are items there that allow me to replicate as well as set a schedule, etc.
On Windows Vista there is a Sync Center, but replication doesn't show up here.
I've searched high and low on Google and am not coming up with anything useful, which leads me to believe this is something very simple that I'm overlooking...
Does anyone know how to make your replication show up on the Sync Center in vista, or is there another application that I should download?
Thanks,
Brian
All,
I am trying to configure merge replication to a SQL CE database using web synchronization.
It works if IIS is on the same box as the SQL Server publisher but when I attempt this using separate boxes I get the following message.
Getting this message
Error messages:
· The schema script 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLReplDatauncPUBSERVER_TESTGOLFTEST_TESTGOLFTESTPUBFILTER20070601105864TESTTransType_2.sch' could not be propagated to the subscriber. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147024893)
Get help: http://help/MSSQL_REPL-2147024893
· The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001)
Get help: http://help/MSSQL_REPL-2147201001
I have followed every bit of advice I can find in the MSDN forums, ensuring that the distributor is writing to a UNC and that the perms for the process are correct.
The 2 test servers are not in a domain and I wonder if this is the issue but connectivity between the 2 servers does not appear to be an issue as I am using administrative ids for connectivity for this test.
BOL is all over the place regarding this subject and I am linked out (perhaps the info I need is in there but who can find it?)
Any guidance would be truly appreciated.
Susan Shafer
thanks 4 ur rpl..well i have a simple doubt if u can guide me it will b gr8 help..well i am developing an application of location based services, in which i am going to store my data on SQLserver 2005 and will fetch the data from it when the user logs in to the user's PDA device so that a user can work offline on the data when there is no connection and when he gets the connection he can synchronize the data with SQLserver 2005. so now i m confuse whether i should use the merge replication or ado.net synchronization framework or RDA?what is the difference between merge replication and synchronization and which is better?
We are running merge replication. My identity value was out of sync and the inserts stopped working. I Reseeded the identity value to 1500000 and ran "sp_adjustpublisheridentity" which set that to the new range (and table constraint)Â in the MSMerge file and table. I discovered my error and Reseeded the table back to 150000. How to I get the new range to be created when it is LESS than 1500000 in the MsMerge file???? Can I use the sp_restoreidentity....???
View 3 Replies View RelatedOn windows XP there is a Synchronize program in Accessories. When I run our replication scripts on a SQL Server Express on the XP machine and start the Synchronize program there are items there that allow me to replicate as well as set a schedule, etc.
On Windows Vista there is a Sync Center, but replication doesn't show up here.
I've searched high and low on Google and am not coming up with anything useful, which leads me to believe this is something very simple that I'm overlooking...
Does anyone know how to make your replication show up on the Sync Center in vista, or is there another application that I should download?
Can I enable the Non - Clustered Index option set to 'TRUE' at publisher does it affect anything?
Does the Non clustered Indexes are automatically transfer to the subscriber database?
Does it affects database performance when I enable this option!
I am using a merge publication set to synchronize schema changes. Why am I getting the following message when I try to sync after having added columns in the publication database using ALTER TABLE statements?
The schema definition of the destination table ... in the subscription database does not match the schema definition of the source table in the publication database. Reinitialize the subscription without a snapshot after ensuring that the schema definition of the destination table is the same as the source table.
Also, why doesn't reinitializing the subscription with @upload_first = false not fix the problem?
I have the merge replication (Push)Â for SQL Server 2008.The right-click option for Start and Stop Synchronizing in subscriptions has been disabled. How can I stop the merge replication and start again ?
This error happened 1 week after I created the merge replication. The merge data cannot sync to subscriber and only solution I can use is drop and re-create the merge replication again but error would be re-occur a week later. The merge replication work fine before and start from middle on May 2015, but it keep happen right now.
Replication is failing while applying the snapshot as the stored procs are out of sync ( the objects referenced in the stored procedures are no more exists in the database) . Is there any easy way to identify the out of sync procedures so that I can exclude these stored procedures from the articles list. I am having around 1000 procs and is not possible to test them by executing.
Thanks in advance.
Hi
I am trying to setup merge replication using web sync. I keep on getting the message: The Proxy Auto-configuration URL was not found. Yes I have read all the postings telling me to check my internet explorer settings concerning proxy server and auto-detection - I am not using a proxy - auto detection is unchecked.
Does anyone have another clue?
Thanks
Alex
2006-08-16 15:31:09.375 Connecting to Subscriber 'CRAW'
2006-08-16 15:31:09.437 Connecting to Subscriber 'CRAW'
2006-08-16 15:31:09.453 The upload message to be sent to Publisher 'CRAW' is being generated
2006-08-16 15:31:09.453 The merge process is using Exchange ID '20E2BF4F-8812-431F-8BF8-94A44B80C16E' for this web synchronization session.
2006-08-16 15:31:09.500 The Proxy Auto-configuration URL was not found.
Hi;
We are performing merge replication between SQL Server 2005 and SQL Server Mobile with more than 1100 handheld, and recently replications are terminating with eror code 80040E19.
We can only avoid the problem by deleting the related user's partition directory and reruning the related user's dynamic snapshot.
Any advice on this issue would be appreciated
Thanks,
Hakan Gümüs
How to check if web merge sync is working between a subscriber and publisher thru HTTPS ? SQL port 1433 at subscriber is blocked so no direct connection to subscriber.
View 2 Replies View Related
I have the following query in an ExecuteSQL Task:
Insert Into Table2
Select * From Table1 Where Column1Val = '4'
As you can see, I don't need any parameters so I havent configured any. Also, there should not be any result set so I shouldnt need to configure a resultset parameter.
Why is the above query failing with
Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly
If anyone could confirm...
SQL Server 2000 SP4 to multiple SQL Server 2005 Mobile Edition on PDAs. My DB on SQL2k is published with a single dynamic row filter using host_name() on my 'parent' table and also join filters from parent to child tables. The row filter uses joins to other tables elsewhere that are not published to evaluate what data is allowed through the filter.
E.g. Published parent table that contains suppliers names, etc. while child table is suppliers' products. The filter queries host_name(s) linked to suppliers in unpublished table elsewhere.
First initial sync with snapshot is correct and as I expected - PDA receives only the data from parent (and thus child tables) that matches the row filter for the host_name provided.
However - in my scenario host_name <--> suppliers may later be updated E.g. more suppliers assigned to a PDA for use or vice versa. But when I merge the mobile DB, the new data is not downloaded? Tried re-running snapshot, etc., no change.
Question: I thought the filters would remain dynamic and be applied on each sync?
I run a 'harmless' update on parent table using TSQL e.g. "update table set 'X' = 'X'" and re-sync. Now the new parent records are downloaded - but the child records are not!
Question: I wonder why if parent records are supplied, why not child records?
If I delete existing DB and sync new, I get the updated snapshot and all is well - until more data added back at server...
Any help would be greatly appreciated. Is it possible (or not) to have dynamic filters run during second or subsequent merge?
and (jobs.ApplicationsClosed > getdate() OR jobs.ApplicationsClosed = getdate())
The above statement does not pick jobs.ApplicationsClosed= 3/30/2004(that is today'sdate)
If I change 3/30/2004 to 3/31/2004 it picks it up. What is wrong with my syntax?
Thanks!
Hi guys,
I'm trying to use the bcp utility to transfer data from an SQL Server table (CUSTOMERS) to a text file (test.txt).
Here is what I have:
DECLARE @FileName varchar(50)
SET @FileName = 'C: est.txt'
EXEC bcp BAirwaysDB..CUSTOMERS out @FileName -S<servername> -T
only I keep getting the error:
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near '.'.
and when running:
bcp BAirwaysDB..CUSTOMERS out C: est.txt -S<servername> -T
on the command line I get:
SQLState = 28000, NativeError = 18456
Error = [Microsoft][SQL Native Client][SQL Server]Login failed for user 'RIVERAMelanie'.
SQLState = 42000, NativeError = 4060
Error = [Microsoft][SQL Native Client][SQL Server]Cannot open database "BAirways" requested by the login. The login failed.
Can you see where I'm going wrong with this? Any feedback would be really appreciated.
Thank you
Butterfly82
Hi,
I have the following simple SP..
There is a field which I'm doing a sUM() on to get a total for a QtyRecieved from one of the tbls in the SP..
However, the QtyRecieved field is set to be a two decimal place numeric field.
The sp works fine without issues until on the of the qty received is not a round number.
If it's a number with a decimal in it (i.e 5.5) then this is show as a seperate result and not SUM'd with the others.
Any ideas why?
SELECT PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID,
dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem,
dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived,
PDS_Login.Supplier_Products.UOM, PDS_Login.Supplier_Products.Vatable, dbo.Suppliers_POs_Details.ProductID,
dbo.Suppliers_POs_Details.PODetailsStatusReason, SUM(dbo.Suppliers_POs_Details_Received.Qty) AS QtyReceived
FROM PDS_Login.Supplier_Products INNER JOIN
dbo.Suppliers_POs_Details ON PDS_Login.Supplier_Products.ProductID = dbo.Suppliers_POs_Details.ProductID RIGHT OUTER JOIN
dbo.Suppliers_POs_Details_Received ON dbo.Suppliers_POs_Details.PODetailsID = dbo.Suppliers_POs_Details_Received.PODetailsID
GROUP BY dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, PDS_Login.Supplier_Products.ProductName,
PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PricePerItem,
dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived,
PDS_Login.Supplier_Products.UOM, PDS_Login.Supplier_Products.Vatable, dbo.Suppliers_POs_Details.ProductID,
dbo.Suppliers_POs_Details.PODetailsStatusReason, dbo.Suppliers_POs_Details_Received.Qty
HAVING (dbo.Suppliers_POs_Details.POID = @POID)
This is a subset question of one of my other threads, the gist is while using forms authentication, I am trying to enter additional information into another table on the same db as the aspnet_membership tables. I think I need an <asp:SqlDataSource> to do this because it is about the only thing left I haven't tried to get this code to work so any help is appreciated. Environment: sql server 2000, windows server 2003, asp.net 2.0, vb, no GUI<ASP:SqlDataSource id="addedInfo" ConnectionString="<%$ ConnectionStrings:SqlServerConnection %>" InsertCommand="INSERT INTO addInfo(username,email,company,firstname,lastname,phone) VALUES (@username,@email,@company,@firstname,@lastname,@phone)" runat="server" />looking over some of my books and online it says in the connectionStrings that it is supposed to be the database name that goes next to the : but when I try that I get an error that it is looking for the name of the connection string, so I enter the name of the connection string (as above) and nothing happens, which is basically the ongoing event with this whole problem, the form fields (username, email, password) that go into the aspnet_membership tables just fine, I don't have any problems with those, it is getting the additional information into another table that has been stalling me the whole time.So does this sqldatasource look right? Any help is appreciated.
View 12 Replies View RelatedHi,
View 6 Replies View RelatedHi everyone,
I'm having some problems importing a CSV to a db in SQL Server
Consider the following csv input
"1102","Spiderman, New York City",
"1103","Superman, Metropolis",
"1104","Batman, Gotham City",
When I select comma as delimiter, the columns will automatically
be offset since the location includes commas as well. How do I correctly
set the delimiter?
I tried using the following as delimiter → ","
but that'll strip the quotes which are required in this case.
Does anyone have an idea how to resolve this?
Call me an idiot as I'm quite new to asp.net. I'm working through a
book called 'ASP.NET Unleashed' where the chapter on how to create a
database connection to an sql database on MSDE called 'pubs' is
shown. Iv'e installed MSDE. When I try to run the example it says that
the login or authentication has failed. Iv'e tried different things but
I'm out of ideas. Another thing is that when I try to install sql
server 2000 on my Win XP it first says something about this being the
wrong OS or something like that. I can get past that but when I'm
presented with 3 installation options 1.client 2. client and
connectivity 3.connectivity I installed client because that's supposed
to create a stand alone installation.
However when I'm done installing the only new entry in the start->programs is
client connectivity. Where is the Enterprise services that I'm supposed
to be able to access according to the book? Is sql server 2000
compatible with XP and not just win 2000?
can somebody tell me whats wrong with this sp..................when i pass lname only or fname only it does not return any data, but when i passs both lname and fname it returns the correct data.....when i rearrange the structure to where it checks the lname only it works also but fname doesn't .........any help is greatlly appreciated
CREATE PROCEDURE [dbo].[temp_search] ( @lname varchar(50) = null, @fname varchar(50) = null, @date1 datetime = null, @date2 datetime = null)
/*set @lname = null -- 'aaa'set @fname = null --'ddd'set @date1 = '2/25/2003'set @date2 = '9/30/2004'*/
as
set nocount on
if not @lname is null or @lname = '' and not @fname is null or @fname = ''begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and temp_user_info.lname like @lname and temp_user_info.fname like @fnameendelse if not @lname is null or @lname = '' begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON cir_temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and temp_user_info.lname like @lname end else if not @fname is null or @fname = '' begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and temp_user_info.fname like @fname end else if not @date1 = null and not @date2 = null begin select cir_temp_user_info.*, dateTime1 FROM cir_temp_user_info INNER JOIN temp_seq ON cir_temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and dateTime1 between @date1 and @date2 end else if not @date1 = null begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON temp_user_info.temp_seq = cir_temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and dateTime1 like @date1 endGO
I am very new to SQL server and I'm using stored procedures for my program. So far I wrote one tonight, that works just fine.
I haven't really written one before, but its kind of similar syntax since I know C++/C# and VB.
My question is, even though this works for what I need it do, is it written correctly? Can you see any problems with it, or would you have done it differently?
I want to make sure its done correctly, and it runs as fast as possible.
Thanks!
[pre]
CREATE PROCEDURE CreateNewUser
@UserID int out, @LoginID nvarchar(30), @Password nvarchar(30), @RegisterDate smalldatetime, @LoginIDExists nvarchar(30)AS /* Check to see if the loginID is already in use before attempting to save it. We MUST have a unique loginID for each user */ SELECT @LoginIDExists = loginID FROM users WHERE loginID = @LoginID
/* If we pulled a value from the database, then the loginID already exists, return with error code 1 */ IF (@LoginIDExists = @LoginID) BEGIN SELECT 1 RETURN END
ELSE BEGIN /* The loginID does not already exist, attemp to add the new user to the database. */ INSERT INTO users ( loginID, loginpassword, registerDate ) VALUES ( @LoginID, @Password, @RegisterDate )
/* Grab the UserID for the new user. */ SELECT @UserID = @@identity
/* return with error code 0 */ SELECT 0 RETURN ENDGO
[/pre]
I have a field called contact_id in a table. Datatype is integer and has an identity seed of 1 and an identity increment of 1. When new records are created, the increment sometimes skips numbers. (ex. 12,13,18,21). What's going on here? Am I losing records somewhere?
Also, this is a cold fusion application. Thanks!!
I have a field called contact_id in a table. Datatype is integer and has an identity seed of 1 and an identity increment of 1. When new records are created, the increment sometimes skips numbers. (ex. 12,13,18,21). There is absolutely no deletion of any kind going on. (i.e. My application (cold fusion) has no code whatsoever that is deleting records.) What's going on here? Am I losing records somewhere?
View 1 Replies View RelatedI've recently just got started using sub queries. The sub query that I'm running is supposed to select distinct values out of a table. It doesn't seem to be working though.
SELECT id
FROM data
WHERE (issueID IN
(SELECT DISTINCT issueID
FROM data))
When I execute this query, it returns a list of id's, but they don't each have a unique issueID. In the data table, issueID can appear more than once (hence, I need to use distinct). However, id is the primary key, and is unique.
Any ideas?
I am new to SQL Server 2005. I have tried to be a good student and learn on my own about designing the database. However, I am facing a blockage of getting data into the database. I want to verify I have setup the relationships correctly. Here is the tables.
1. A Manufacture has an Address.
2. A Manufacturer has one or more Distribution Points.
3. A Distribution Point has an Address.
The Manufacturer --> Address is a one-to-one relationship.
The Distribution Point --> Address is a one-to-one relationship.
The Manufacturer --> Distribution Point is a one-to-many relationship.
The manufacturer table has a FK to the address id (PK).
The distribution table has a FK to the address id (PK).
The distribution table has a FK to the Manufacturer id (PK).
Address has several other FK, but not used in this scenario.
The INSERT and UPDATE Specification for the Delete Rule and Update Rule is set to "No Action" for the Manufacturer and Address tables. In the Distribution Point table, the relationship for the update rule involving the relationship with the Address and Manufacturer tables is set to CASCADE. What this tells me is SQL Server 2005 will update the table should changes occur in Address and Manufacturer table.
Is there anything else I can check to be sure the issue I am facing is NOT the deisgn of the database?
Thanks for taking the time to read my post.
Russ
Does anybody know how to work with two (or more) databases in SQL Server 2005; or where that information can be obtained? I searched online, in BOL and asked in this forum but with no success.
information in this posting does not work; results in invalid object name (source database) and/or database does not exist (destination database) errors:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=292125&SiteID=1
this post about the database does not exist has received no replies:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=295742&SiteID=1
Of course, both databases exist and their names are valid. Both can be accessed individually thru SSMS and a VB app I am coding. The problem is when trying to work with both of them.
Any information on the subject of working with multiple datatabases and/or links to said subject would be appreciated.