Hi,
from the url--- http://support.microsoft.com/default.aspx?scid=kb;en-us;820675 I did the steps to implement the replication. However, i did not include a timestamp column in the tables. Is it important as to what would happen if i did not include this? I have the rowguidcol though. I thought this could would help to identify the various row.
Help pls?
:confused:
The docs state that a timestamp column is required for bi-directional
replication. I am not syncing the databases since they are too big and
it is a new project so I can guarantee at start that there will be two
exact copies of data. The data is being converted from a FoxPro db to
sqlserver.
The question is:
How do you design the timestamp columns for partioned bi-directional
replication? Does the publisher get the timestamp and the subscriber get
a binary(8)? Since there are two publishers is a distinct timestamp and
binary pair required for each server? See below...
Server: REP1 REP2
Table: tblTest tblTest
Columns: col1... col1...
tsREP1 timestamp tsREP1 binary(8)
tsREP2 binary(8) tsREP2 timestamp
Do the binary(8) columns need to be removed from the articles? Can
anyone explain how the timestamp is used to stop loop back? Is the loop
back check done on the Publisher or Subscriber?
Thanks,
Norman
I am trying to replicate tables in a sql server 6.5 which contain the timestamp field. An error occurs and it shuts the replication task off and it says it cannot update the timestamp field. If I choose vertical partitioning and do not replicate the timestamp field then an error occurs that insert value list does not match column list. Is it the case that the subscriber cannot have this field in the table?
Besides deleting the timestamp field from the table completely, is there another solution or am I forgetting to set something?
Hi Friends
I have transactional replication,
The publisher DB contains table call Courser with timestamp column, this column values are unique for the publisher DB
The subscriber DB also contains same copy of data in publisher DB Course table, but the timestamp column values are different.
So my problem is how can I keep this two tables (Course) identically, (same timestamp column vales in both table)
NOTE: Publisher and Subscriber DB reside under two different SQL server instance
Thanks and regards
IndikaD (Virtusa cop SL)
I am populating oracle source in Sql Server Destination. after few rows it fails it displays this error:
[OLE DB Destination [16]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description:
"Invalid date format".
I used this script component using the following code in between the adapters, However after 9,500 rows it failed again giving the same above error:
To convert Oracle timestamp to Sql Server timestamp
If Row.CALCULATEDETADATECUST_IsNull = False Then
If IsDate(DateSerial(Row.CALCULATEDETADATECUST.Year, Row.CALCULATEDETADATECUST.Month, Row.CALCULATEDETADATECUST.Day)) Then
dt = Row.CALCULATEDETADATECUST
Row.CALCULATEDETADATECUSTD = dt
End If
End If
I don't know if my code is right . Please inform, how i can achieve this.
date time s-sitename TimeTaken(Seconds)
6/8/2015 10:56:26 TestSite 100
6/8/2015 10:56:26 TestSite 500
6/8/2015 10:56:26 TestSite 800
6/9/2015 11:56:26 TestSite 700
6/9/2015 11:56:26 TestSite 200
6/12/2015 12:56:26 TestSite 700
I have a table with above values, I am looking for a sql query to find AvgTimeTaken at different time stamps and total count of each time stamp
Output
date time s-sitename TimeTaken(Seconds) Count_of_Request
6/8/2015 10:56:26 TestSite 1400 3
6/9/2015 11:56:26 TestSite 900 2
6/12/2015 12:56:26 TestSite 700 1
For starters, please feel free to move this if it is in the wrong forum.
The issue I have is this. I have been asked to delete all information from a table that was inserted before May 12 this year. The issue is that when the DB was created, whoever designedd it neglected to add a timestamp column for the user data table (the one I need to purge). Does SQL, by default, happen to store insert times? Would it be something that might hide ina log file somewhere?
how to insert a value into table where the fieldname uses a datatype timestamp.(asp.net2.0)
View 1 Replies View RelatedI have a timestamp in a date field of a table I have but when run it does not enter the date automatically and all I get is system.byte[] display where the dtae and time should be, how can i get it so this field places the date in automatically.???
View 1 Replies View RelatedI am retrieving data from a database, and have been noticing some really strange timestamps. Has anyone ever seen a timestamp that looks like this: 16777215Karls
View 1 Replies View RelatedHello,
I just started using SQL and i don't really know too much syntax.
I have an ASP page that is inserting data into a table called YellowAlerts.
The first field in this table is AlertDate. I thought I read somewhere that there is a timestamp feature. If anyone could help me out that would be great.
Thanks.
How can I add a timestamp column to a table that will let me know when
a record was inserted? (perhaps by setting a default to that column?)
For some reason, @@currenttimestamp gives me
some binary garbage.
Please help with any suggestions.
How do I "disable" the timestamp so that when I copy my data into a new
database it will use the timestamp from the last time the table was effected?
Thanks,
Tracy
Hi All,
I believe that all created tables have got by default a timestamp field.
I tried to find out how to read this field with a Transact-SQL statement.
And so I don't know the syntax, is anyone can help me ?
Thanks,
Herve
If i have a table with a 3 fields and one of them has a timestamp as a field type and I want to do an insert or update what is the value I am inserting for the column timestamp.
Help appreciated
hello I put a time stamp in one of my column and it says binary data in the field. How do i make that binary data turn into a real date and time. If this is possible how do I separate the date from the time in the results or would I have to do this myself. Also, I need to sort the results by date can this be done?
Sorry for the stupid questions my sql book (sql demystified) does not elaborate. Thanks
hello,
m new to sql server.can any one tell me is it possible to insert only time value in timestamp datatype.
i have table which have datatype datetime.and i have to insert only time.i can't change the datatype datetime to any other one.p
plz any one can suggest me the solution..
Regards,
Sonal.
Hello I'm not a SQL Expert but i'm using it for a few months. Now i need to use a variable that everytime that is called to a select into it gives the timestamp (or Stamp) to put on a specific field. The problem is that i need this variable not in bd conotation (like 2007-02-12 12:00:44:33) but like this 2007021212004433. Can someone help me? Thanks in advance.
View 5 Replies View RelatedIs there any reason to have a TimeStamp column onto a table that has aPrimaryKey when using SQL Server and an Access front end?I read that doing so will always eliminate that write conflict error.But I notice that when pulling a recordset of 10K records, it takes 3Xless time if I delete the timestamp column on the table before runningthe SP.lq
View 2 Replies View RelatedIs there any chance to get the content of a timestamp field?I am trying to get the content via Visual Objects and I am receiving onlynothing.Not NIL but "".Is it possible to get any useful information out of this field in anylanguage?(btw I know that the MS-Timestamp is not a timeformat)THXJens
View 1 Replies View RelatedIs there any reason at all to use a timestamp column in a table havinga primarykey column???lq
View 2 Replies View RelatedHi there,
When inserting into a table with a timestamp column without explicitly setting the column_list you get the following.
ie.
insert into Table_A
select *
from Table_B
Cannot insert a non-null value into a timestamp column. Use INSERT with a column list or with a default of NULL for the timestamp column.
I was wondering if there's a way to overcome this without specifying the column list?
Thanks.
HI every one
I have a timestamp column in my database. I want to use this column to get current changes but i am not able to get desired results when i use to compare that field in C#.
Thanks in advance
Take Care
ALLAH HAFIZ
Hi folks, I am binding a gridview to a SQLDataSource that contains a timestamp column. My SQLDatasource contains an update method (via a stored procedure) that takes all of the data fields from the grid as input parameters. I am getting an error stating 'sql_variant is incompatible with timestamp' . The parameter definition for the update method specifies the timestamp column as type 'Object'. <UpdateParameters> <asp:Parameter Name="timestamp" Type="Object" /> ... </UpdateParameters> When the data is initially retrieved, the timestamp column is converted to a System.Byte[] however I cannot specify System.Byte[] in the parameter definition (different error) I have read other post with this issue but none seemed to have been solved (while still using SQLDataSource and binding).I have tried other datatypes and they do not work as well. Any help would be greatly appreciatedThanksTom
View 3 Replies View RelatedI have a database that I don't want to lock. I decided that before any updates can occur I would check a timestamp value and ensure that nobody else updated before I did (avoiding the 'last update wins' scenario).
I have a problem, I can read the Timestamp from the db when I read the record. I currently use the data to pre-fill a form (gee go figure ;) ) and the user changes some values and updates.
I don't know what to DO with the timestamp value while I am holding it. I have tried putting it into a hidden field on the form but the value does not seem to translate back and forth.
Do I have to store it as in memory as part of the session or can I somehow convert to and from text??
I have about 0 experience working with byte arrays so the best answer is one with an example.
Thanks.
Hi world,I would like to know how to maintain a table with a "timestamp" column. I mean a column that automatically set the current datetime when the row is updated.I don't want to go trought my application and set that in the update or insert command. I would like to know if there is a possibility of putting a trigger or something.thx
View 6 Replies View RelatedCan I use "timestamp" datatype in SQL Server as the equivalent datatype for "binary" in ACCESS 2000?
View 1 Replies View RelatedI have a table in SQL server 6.5 which has two columns. One is a timestamp column and another is an int column. Now I need to change the int column to numeric (16). For this I cannot use the alter table statement as it is not there in sql server 6.5. I tried creating another table with two columns- one as numeric(16) and the other as timestamp. I transferred the data from he old table to the new table and dropped the old table and finally renamed the new table as the name of the old table. But the problem is that the timestamp column now contains data that is different from the data that was there in the original column. I cannot update the timestamp column as that is done automatically neither can I insert the values. How do I make sure that the data in the timestamp column remains the same.
Any help would be greatly appreciated.
Vikram
can i convert a timestamp data type
View 1 Replies View RelatedActually 'TIMESTAMP' is used to monitor the INSERTION AND UPDATION on a table.Based on that 'TIMESTAMP', is it possible to extract any details by appling some QUERY in QUERY ANALYZER?. If anybody gives a solution to this I will be thankful to them.
Srinivasan
I'm having trouble converting a timestamp value passed into a stored procedure as a char to binary(8). For example, the value passed in is
'00000000000002CA'. I want to convert to a binary(8) value so I can use this in the where clause of a query.
I can't seem to get the conversion to work correctly.
Thanks in advance for your help.
How can I check the timestamp on the table last updated?
View 1 Replies View Relatedhi all,
I have a desktop edition of SQL server installed on nt.4.00.sp 5
from what i know..a timestamp field should insert current date & time...right?
So..
if i run these statements:
/****** Object: Table [dbo].[T1] Script Date: 12/7/99 10:45:49 AM ******/
if exists (select * from sysobjects where id = object_id(N'[dbo].[T1]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[T1]
GO
/****** Object: Table [dbo].[T1] Script Date: 12/7/99 10:45:51 AM ******/
CREATE TABLE [dbo].[T1] (
[column_1] [int] IDENTITY (1, 1) NOT NULL ,
[column_2] [varchar] (30) NULL ,
[column_3] [int] NULL ,
[column_4] [timestamp] NULL
) ON [PRIMARY]
GO
INSERT INTO T1 (column_2,column_3)VALUES ('new', 123)
INSERT INTO T1 (column_2,column_3)VALUES ('new1', 1234)
INSERT INTO T1 (column_2,column_3)VALUES ('new2', 12345)
go
SELECT cast(column_4 as smalldatetime)
FROM T1
go
I get this result:
(1 row(s) affected)
(1 row(s) affected)
(1 row(s) affected)
---------------------------
1900-01-01 06:51:00
1900-01-01 06:52:00
1900-01-01 06:53:00
(3 row(s) affected)
my clock is running up to date...
I have no idea why i'm getting this..is this a bug...???
Please help...