Replication Failure. File 'r:SPHINXNTDBMSsrvreplsrc
Eplicat.cpp', Line 2634.
Apr 6, 2001
We are getting above error message while running transactional replication between two servers. Both are running SP2 (7.00.842), so I don't think the earlier SPs fix this particular error. We do replicate text columns.
I went through the troubleshooting replication guide and now am receiving the following error instead:
The process could not execute 'sp_repldone/sp_replcounters' on 'servername'.
I figure we could re-install replication, but I don't see that realistic on-going resolution.
Hi, for some AP issue, the file I upload must be without the line feed/carriage return in the last line. for example:
original fixed-length file (exported from SSIS) line NO DATA 1 AA123456 50 60 2 BB123456 30 40 3 CC123456 80 90 4 <-- with line feed/carriage return in the last line
The file format that AP request. The file only has 3 records, so it should end in the third line. line NO DATA 1 AA123456 50 60 2 BB123456 30 40 3 CC123456 80 90
Should I use script component to do it ? I am new for VB . Anyone would help me ?
By Accident One table got truncated on the subscriber which is one of the table in Published articles. Now all the Update inserts and delete are failing . and other tables are not being replicated either. what could be done to fix this . Publisher gets a lots of updates every hour how ever because of this problem all the tables are not getting any transactins replicated. Please help ASAP
I am fed up of getting the below error message of repl. atleast once a day.
JOB RUN: 'REPL:1001' was run on 3/23/2007 at 3:00:01 AM DURATION: 1 hours, 11 minutes, 11 seconds STATUS: Failed MESSAGES: The job failed. The Job was invoked by Schedule 421 (Replication agent schedule.). The last step to run was step 3 (Detect nonlogged agent shutdown.).
Please see below for the description of my Replication Job: ------------------------------------ Steps of Job: 1. Distribution Agent startup message. db: distribution cmd: sp_MSadd_distribution_history @perfmon_increment = 0, @agent_id = 126, @runstatus = 1, @comments = 'Starting agent.' 2. Run agent. cmd: -Subscriber [GIZMO] -SubscriberDB [TelehopBilling] -Publisher [ROGER] -Distributor [ROGER] -DistributorSecurityMode 1 -PublisherDB [TelehopBilling] 3. Detect nonlogged agent shutdown. db: distribution cmd: sp_MSdetect_nonlogged_shutdown @subsystem = 'Distribution', @agent_id = 126
This Job is executed every hourly and an error is fired atleast once a day notifying failure of this process. Please help me in resolving this issue.
Recently I Restored a database from Live to Test Instance for implementing CDC feature on sql server 2008 X64 Enterprise Edition on Windows server 2008r2 X64.
Meant there was NO CDC Enabled in Production Nor Replication Features Its stand Alone.Â
Initially i Enabled CDC on Database level and next for 3 Tables, after that i inserted records for all the tables but the same was not getting reflected to CDC tables. then i checked in agent service-> CDC capture Job -> view history, then i got the following below error..
Message
Msg 22859, Level 16, State 2, Log Scan process failed in processing log records. Refer to previous errors in the current session to identify the cause and correct any associated problems. For more information, query the sys.dm_cdc_errors dynamic management view.
Date 14-Dec-13 8:07:35 AM Log Job History (cdc.HC_UAT_DB_V4_capture)
Step ID 2
Server ADDCSVHC05 Job Name cdc.HC_UAT_DB_V4_capture Step Name Change Data Capture Collection Agent Duration 00:34:29 Sql Severity 16 Sql Message ID 22859 Operator Emailed Operator Net sent Operator Paged Retries Attempted 11
Message
Executed as user: Testhcuat. Could not locate text information records for the column "ExMaritalStatus",Â
ID 189 during command construction. [SQLSTATE 42000] (Error 18773) Â The Log-Scan Process failed to construct aÂ
replicated command from log sequence number (LSN) {00232390:00001fc9:0015}. Back up the publication database andÂ
contact Customer Support Services. [SQLSTATE 42000] (Error 18805) Â Log Scan process failed in processing logÂ
records. Refer to previous errors in the current session to identify the cause and correct any associatedÂ
problems. [SQLSTATE 42000] (Error 22859)
what is the cause for the below error and how i can get rid of this.
"ExMaritalStatus",column -> Nvarchar datatype
Note :Â issue can be solved by disabling & enabling CDC at database level but i need the root cause, again CDC capture job fails for capturing other Nvarchar columns when i Re-Enable at the database level. This cause is getting cycled/looping in capturing other colums.
We replicate from London to New York and Hong Kong. The New York replication is working fine but everytime we try the Hong Kong replication it starts doing it but when it gets to the bulk copying stage it'll still keep going but on a random table will suddenly fail with a communication link failure message ?? It used to do this and because it keeps trying it used to eventually succeed but recently it never succeeds ?? It keeps trying but we end up having to stop it as it just doesn't succeed anymore ?? Our link to Hong Kong appears fine, we can ping and PC Duo into their servers.
Any ideas would be greatly appreciated as we can't think what it may be ??
I'm getting the error message below when trying to synchronise a sql compact database to a sql server 2005 db. Can anyone suggest a reason for this?
RDA works fine, permissions look ok. I've run process monitor and can see the IN/OUT files being created, no ACCESS DENIED messages etc. help!
New Subscription Wizard
- Beginning Synchronization (Success)
- Synchronizing Data (100%) (Error)
Messages
Initializing SQL Server Reconciler has failed. Try again. HRESULT 0x80045901 (29045)
The merge process could not initialize the message file from Subscriber 'D:InetpubwwwrootSync30.59FA6BD9893A_9BFA53BB-1D7C-4E84-967A-799C6FEBFCE3.IN:D:InetpubwwwrootSync30.59FA6BD9893A_9BFA53BB-1D7C-4E84-967A-799C6FEBFCE3.OUT'. HRESULT 0x80045901 (0)
I have a publisher, remote distributor and subscriber all running SS2000.
Under replication monitor on the distributor, under replication alerts i have enabled the "replication agent failure" alert. All i need to know is should this alert trigger if the distribution agent that runs on the subscriber not the distributor fails?
I have add occurences of the distribution agent failing and the alert is not triggerred, is this because it only triggers for the agents that run on the distributor, ie: snapshot and log reader agents?
I'm "trying" to set up Replication. The Publishing/Distribution server is in one domain, and the subscribing server is in another. Both domains are fully trusted.
The synchronization step builds the .tmp file, but the repl_subscriber Distribution task bites the dust with an error message, "28000[Microsoft][ODBC SQL Server Driver][SQL Server] Login failed".
The setting on the distribution options dialog box is ODBC, SQL Server. I'm not using a special login/password. I've even tried putting a user name and password there, and it doesn't work. The ODBC connections test out fine on both servers. Any suggestions where I've gone wrong?
I built a number of publications on a SQL Server 2005 box to replicate to a SQL Server 2012 subscriber. All the publications except one are fine. During the snapshot phase of schema script generation I get Script Failed for Table 'dbo.MediaDisplayLibraryFileData'. From the Replication monitor for the Snapshot Agent on the Publication I get, "Column FileData in object MediaDisplayLibraryFileData contains type VarBinaryMax, which is not supported in the target server version, SQL Server 2000." This message makes no sense since the target server version is 2012. I have even checked that the compatibility level was set to 110 before I started the process of setting up replication. How do I resolve this error?
I have taken over a transactional replication setup that is being usedfor fault tolerance (I know, I know...).The scenario I am concerned with is where the publisher goes down due tofailure, so we need to point our application at the subscriber and startupdating the data there. We are not using the immediate updating option.How do I go about re-syncing the publisher with the data that been addedto, or changed on the subscriber, when the publisher comes back online?Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
We have push transaction replication from A database to 2 other B and C database. I have configured email to sent upon failure of subscription job of B and D database on Database A. Is this the way that we need to configure email to send when there is replication break up or failure.
Database is MS sql server 2008 R2 Publication Database: A Replication mode : Transaction Replication Replication used : Push Replication from database A Subscription Database: B and C
Hi!I´m trying to create a merge replication publication for a SQL MobileApplication .Everything works fine creating the publication and I'm able to dothehttp://xxx.xxx.xxx.xxx/aaaaaaa/sqlcesa30.dll, and it display's the"sql server mobile server agent 3.0".But when I run the application on the PDA and it´s doing thereplication it appears the following error:'Failure to connect to SQL Server with provided connectioninformation . SQL Server does not exist , access is denied becausetheIIS user is not a valid user on the SQL Server , or the password isincorrect' .any idea of which could be the reason...?Thanks in advance!!!
Hi ALL, I need to delete 1st and last lines of text from a text file in an automated process,and save the file with the same name or a different name at the same location. How is that possible?Any help is greatly appreciated. Thanks!! Sai.
I am writing a string to a text file using the below code:
DECLARE @MyText nvarchar(500) SET @MyText = 'type This is my text >> c:MyLog.txt' exec master..xp_cmdshell @MyText
What I want to know is. how do I write multiple lines to MyLog.txt without having to call out xp_cmdshell each time I want a new line in my log? Do I use newline character in @MyText like SET @MyText = 'type This is my text line 1</n>This is line2 >> c:MyLog.txt'
I created a package that exports contents from a table to a flat file but all my records are being displayed in a single record. where do i configure it to where each record has its own line. the columns in the flat file are fixed.
I have a series of fixed width files, all with the same schema. I need to import the data into a SQL Server table. Each record in the flat file begins with 'D1'. The length of each record (string) is 380. There are cases where the record ends after position 193, and a new record appears in the current string beginning at position 194. So at position 194 'D' appears, and '1' appears at position 195.
In the flat file, I need to insert a line break after position 193 if position 194 = 'D' and if position 195 = '1'. I'm guessing I would do this with a Script Component Transformation. Once the file is edited, then I can bring the data into the table.
What might the script look like? If you have any suggestions, samples, or know of examples on the web you can point me to, please share.
I have a flat file with several rows of entire type in one of the rows a string comes and when it goes away to guard in the BD it falls, since I can know in that this row of the flat file the string?????
Using ADO to conect to a text format data file to gather data. File is a .dat file, tab delimited, no header row.
Got all my ducks in a row: 1) Write a schema.ini 2) Make sure the extension is not excluded in the Jet Text registry key 3) Setup the connection properly (per MSDN Scripting help)
Works nicely, except the fist line of data is missing. File contains 78 rows of data, Jet is skipping the first line every time and reporting 77 rows.
Notes: 1) Adding a blank row, as suggested in this forum, is not an option - the data files are machine generated are not to be altered by other processes. 2) I could do it the old fashion way of importing and splitting into arrays, but this is a database function and ADO should be able to handle it.
Code samples:
Code Block
adoCON.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & sPath & ";Extended Properties=""text;HDR=NO;FMT=Delimited;"";" On Error Resume Next rsSrc.Open "Select * From " & sFile, adoCON, adOpenStatic, adLockOptimistic, adCmdText sPath is a string containing the path, including the trailing sFile is a string containing the file name.
I have a flat file destination that Im sending data to, from an OLE DB data source. There are two records, but for some reason they are both going on the same line in the output. This is after setting the output to fixed width, from comma delimited.
My Integration Services creates a flat file using OLE DB Source and then a Flat File Destination. The flat file is created from data from my data source with is just a table with many rows.
Each row in my flat file .txt is appended onto each other, there are no line returns after each record. How can I put in a return after each row in my flat file that is outputted from the Flat File Destination component in conjunction with the properties in my Flat File Connection Manager. What am I missing here in order to ensure each row from my table creates a carriage return in my .txt flat file?
Checkdb reported errors against 1 index on 1 table in a database. When I try and fix the index, I get the message 'SQL Server Assertion: File: <recbase.cpp>, line=1374 (s sqldmp file is created). When I tried dropping the index and recreating, this also caused the Failed Assertion message. At this point I could not select any records from the database or copy the database to another source. Everything I tried produced the same error message. I was able to rename the table and recreate the database from another server.
After rebooting the machine, I was able to add an index to the renamed table. I can't find any information to indicate what my problem might be.
Has anyone else seen this behaviour and if so what was the resolution?
I need to execute xp_cmdshell in a trigger and pass a command lineparameter to the .exe programi.e. I have a .exe program c:program filessavedata.exeIn the trigger I have a parameter @Id bigintI need to pass the parameter @Id to savedata.exeIn the trigger, I am tryingEXEC master..xp_cmdshell 'cmd.exe /C "c:program filessavedata.exe "'+ CAST(@Id as varchar)BUT this does not work.Can someone please help me with how to do this?Thanks,db
Hi,I have dumped a very large database from mysql (using mysqldump program)as a raw sql file. The reason was, convert this database to a MSSQLdatabase. Since mysqldump creates the file as raw sql file with thedatabase-table structures and the data in it, I thought using OSQL commandline utilities should work to out this whole database in MSSQL server.I have run this command from command line:osql -u sa -i mysqldump.sqlIt is going since yesterday. It has been almost 36 hours that it'sstarted. And in the mssql server, I see no database created yet. On thescreen of the command line, I see bunch of numbers are going in order. Iassume they are row numbers of the tables processed. But, if it is doing it,then where is it saving all this data ? I have checked the tempdb, pub db,other dbs, and I see no tables related to the database I am inserting. Willit populate it at the and of the job ? Or, am I doing something wrong here?Regards.Murtix.
I have a CSV file that I am importing via SSIS into a SQL table.On the Flat File connector, I have specified Line Feed as the row delimiter.The data flow is failing due to some of the rows having line feeds before the end of the row.Is there a way to get rid of some line feeds but not others, so that I can run the data flow successfully.
Hi, I have a data file and the contents of it are as follows
2 -- This is the header indicating the no of records in my files 1001|s1 1006|s2
The content of format file is as follows. This is to skip first column of the all the rows and get only Subs (i.e s1 and s2 )
9.0
2 1 SQLCHAR 0 100 "|" 0 ID ""
2 SQLCHAR 0 100 " " 1 Subs ""
Here is my query to get all the Subs from my data file
SELECT * FROM OPENROWSET( BULK 'datafile.txt',
FORMATFILE = 'FormatFile.fmt',
FIRSTROW = 2 ) AS a
But this query retuns only s2 where i was expeting s1 and s2. The reason being is that the firts row i.e header doesn't follow the format Can any one please let me know how to skip the first line in the data file and get the result as required
Anyone else seen this specific error message before:
quote:
SQL Server Assertion: File: <lckmgr.cpp>, line=10850 Failed Assertion = 'GetLocalLockPartition () == xactLockInfo->GetLocalLockPartition ()'. This error may be timing-related. If the error persists after rerunning the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
google gets several hits for a different line number, and different type of lock.
We've had 3 of these Monday, in a 1h20min period. This first raised it's head last friday (3 on friday, 2 on Saturday). All the same line number.
We failed over, ran DBCC Checkdb no_infomsgs - reported no problems. restarted SQL on passive node (previously active node that had erported the assertion failures) Then we had assertion failure on new active node. ran DBCC CHECKDB , and it also report 0 errors, 0 consistency errors.
Today (Tuesday 26th june) we've had many of these failures - in excess of 20, this morning.
As yet, we can't detect any specific issues in terms of user impact/website. Our concern is whether we are going to have data inconsistencies at some point.... and that locking , if failing, may be causing inaccurate results (depending on the specific locks that fail) - for example stock levels, causing overselling.
Our MSSQL 2000 server crashed yesterday and one database cannot be restored. the latest backup we have is june. We can only recover the MDF file from the harddisk and according to our admin, it cannot be restored anymore because no proper shutdown was made.
