I am running a SQL Server 2000 cluster (active to active). I trying to replicate (Transaction) a portion of my tables from instance1 to instance2 but neither the initial SnapShot nor the Log Reader can connect to instance1 which is where the ditributor is located. I have successfully ran replication in the past but not on a clustered server. Can anyone help me out with this?
Thanks,
Jeff
1) I have the Active/Passive cluster environment (using Microsoft cluster service).
2) SQL2000 is installed on the cluster (Virtual instance).
3) Virtual instance of SQL Server is used as Publisher in Transactional replication with updatable subscribers.
4) Subscribers are passing updates to subscriber using MSMQ
5) The problem is : after I establish replication , the Queue Agent fails with following error (“Failed to initiate search for MSMQs”)
Hi All,I would like to set up transactional replication with failover cluster.Did anybody tried this? Does it work together? Is there anything Ishould be coutios when I set up these together? or Is there anyglitches?If somebody helps me I will really appreciate itThanks
View 1 Replies View RelatedI am trying to set up replication (transactional with updates) from a 2-node Active/Passive SQL Server 2005 Cluster to a SQL Server 2005 server in a Workgroup. When configuring the Snapshot Agent, Log Reader Agent and Queue Reader Agent from the Publisher (Cluster) we are advised not to use the SQL Server Agent Service Account for security reasons. When I specify a Domain Account I get an "unknown security error" staring the snapshot agent. When I select the option to run under the service account all works well. Strange thing is when I specify the service account I still get the "unknown security error" message. Anyone got any ideas?
View 9 Replies View RelatedI have problem when I create the clusters I created domain account and give him permission create computer objects and real all properties but there are problem when clean up the cluster always pop up and error but latter I tried using my domain admin and worked perfectly is there any permission is missing for cluster ? or all I need is Create Computer Object and Read Permission?
View 3 Replies View Related
Greetings:
I am working on a replication setup using transactional replication using with pull subscriptions and a separate distributor. The pull subscriptions are located on a SQL cluster using the virtual SQL Server name as the subscriber; when the box fails over, we get an error of missing replication.dlls. Researching further, we found that replication only works on one node of the subscriber.
Any ideas on what we did wrong in the setup?
Thanks,
Lee Everest
www.texas2oo.com/sqlblog
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
Â
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Â Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command:Â Â Â Â Â Â Â Â Â sc config winmgmt start= autoÂ
Last command to run after above steps
4. Command:Â Â Â Â mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedI´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies View RelatedI have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL ServerÂ
4. windows ClusterÂ
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
CREATE TABLE [dbo].[Access](
 [AdminID] [int] NOT NULL,
 [FnID] [int] NOT NULL,
 CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
We have (had) an active/active cluster. 2 physical machines,
each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.
Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we
rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back
into the cluster and get Ins2 failed back over to Node2.
Does anyone know, for certain, the correct steps to accomplish this? Obviously,
we could backup everything and completely destroy Ins2 and recreate it on Node2
then rejoin the cluster. But I'm looking for something less destructive.
Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2
over? Or will there be registry conflictions?
Any help would be appreciated. Also, if you have any links to some official
documentation, that would be great too.
Thanks
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
Friends -
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
Please advise me and correct my steps.
Cheers
VSH
Can the SQL Cluster Virtual IP be the same as the cluster IP?
Can I set up the cluster like:
Node 1:10.0.0.1
Node 2:10.0.0.2
MSCS Shared:10.0.0.3
SQL Virtual:10.0.0.3
or do they need to be unique?
I have two Windows 2000 servers (Advance Edition) to form a Windows Cluster. I also install MS SQL 2000 Enterprise Edition on the cluster to form a MS SQL cluster. Now, I want to upgrade the hardware and OS (but keep on using SQL 2000), so I install Windows 2003 server Enterprise Edition on two new servers to form a new Windows Cluster. I am planing to install MS SQL 2000 Enterprise Edition on the new cluster, so the old SQL cluster and new SQL cluster are side by side. I would like to know how to setup a new SQL cluster (I know it has problem to rename SQL Cluster name, so how to fix this problem)? And how to transfer everything (such as system databases, users database, sql user account, password and maintenance plan jobs etc) from old SQL cluster to new SQL cluster? And how to switch over from old SQL cluster to new SQL cluster?
Thanks a lot !
According to microsoft, we can cluster SSIS service but it is NOT RECOMMENDED.
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Now this is the situation that I have where I need to understand how SSIS works?
Enviornment: Active Active cluster enviornment for SQL server with SSIS server installed as stand alone as default on both node.
Name: Node 1 Node 2
--------- -------------- ---------------------
Server name: Nd1 Nd2
SQL server name: cs-nd1in01 cs-nd2in02
SSIS server name: Nd1 Nd2
BTW, this is cosolidated enviornment so there are more than one application expected and resides on each instance of SQL server.
The question is around SSIS, what would be the best practice to develop SSIS package that can work with above envoinrment.
Secnario: What if my Nd1 fails. SQL server cs-nd1IN01 will be failover to Nd2 and it will be available. But How about SSIS packages? How that understands
to use Nd2 SSIS as Nd1 SSIS is not available. Is anyone has similar experience to setup SSIS in cluster envionrment but as non-cluster service?
Please help. Thanks in adavance.
Friends -
Could any one of you provide steps for upgrading SQL Server 2000 cluster to SQL server 2005 cluster.
My environment is Windows 2003 server.
Appreciate your support.
Cheers
VSH
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies View RelatedHi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies View RelatedHi,
In my production box is running on SQL7.0 with Merge replication and i want add one more table and i want add one more column existing replication table. Any body guide me how to add .This is very urgent
Regards
Don
Hello,
I have this problem on a Production database.
DBCC OPENTRAN shows "REPLICATION" on a server that is not configured for replication. The transaction log is almost as large as the database (40GB) with a Simple recovery model. I would like to find out how the log can be truncated in such a situation.
Thank you.
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies View RelatedWhat is the main difference between snapshot and transactional and merge replication?
View 5 Replies View RelatedHi,
I have a VB.net app that access a SQL Express database. I have transactional repliaction set up on a SQL 2000 database (the publisher) and a pull subscription from the VB.net app. I use RMO in the VB app to connect to the publisher. My problem is I am getting some strange behaviour as follows
- if I run the app and invoke the pull subscription it works fine. If I then close my app and go back in, I can access my data without any problem
- If I run the app and try to access data in my SQL Express database it works fine. I can then close the app, reopen it and run the pull subscription it works fine
however.......
- if I run the app, invoke the pull subscription (which runs fine), and then try to access data in my local SQL Express database without firstly closing and reopening the app, I get a login error
- if I run the app, try to access data in my local SQL Express database (which works fine), and then try to run the pull subscription I get a "the process cannot acces the file as it is being used by another process" error. In this case I need to restart the SQL Express service to be able to run replication again.
I get exactly the same behaviour when I use the Windows Sync tool (with my app open at the same time) instead of my RMO code to replicate the data.
I am using standard ADO.Net 2 code to access my SQL Express data in the app and closing all connections etc
Any advice appreciated !
Thanks
Ronan