Good day!
I am getting a bizard error here...
I am trying to drop replication off a database, and funny enough went trough all the steps and I am still getting the error when I try to Disable publishing.
I also did an EXEC sp_removedbreplication 'databasename'
Any ideas?
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies View RelatedThe error message is "cannot drop the table because it is being used for replication"
my sql version is in sql server 2012 and Im ussing merge replication.
I want to drop only one table.
This thread is no longer active. I moved issue to a new, cleaner thread named: How can I get Transactional Republishing to work?
--------------------------------------------------------------------------------------------------------------------
I've tried for more than a week to figure this one out, but have not found a solution. I'm missing some critical information that perhaps someone can share. I'm desperate and embarassed that this has kept me stuck for so long. Thanks for any assistance.
In my simplist scenario, I'm transactionally replicating a single table from database A to database B and then from database B to database C. All databases are on the same XP server (in this simplist version of the problem). This is SQL 2005 RTM. Publication A to B replicates fine. Publication B to C can't even get the snapshot to work because I get the error:
Command attempted:
drop Table "dbo"."MyReplTable"
(Transaction sequence number: 0x00004174000000E100A300000000, Command ID: 41)
Error messages:
Cannot drop the table 'dbo.MyReplTable' because it is being used for replication. (Source: MSSQLServer, Error number: 3724) Get help: http://help/3724 (fyi - there is no help here)
I have a simple example script where I've renamed real names to fake names, that is exactly what I run to simulate the problem. Obviously the script is wrong, but where? I used the wizard to create the whole script (I know that is my first mistake ;-) ). After I start the snapshot jobs, I get the error above.
I presume that the sp_addarticle option @pre_creation_cmd = N'drop' is part of the problem. I don't have row filters. Also, I want to be able to replicate schema modifications when necessary (like add a column or drop a column)
Perhaps the sp_addpublication @repl_freq = N'continuous' option in the AtoB publication prevents the BtoC publication from ever getting a chance to do anything, if it never lets go of the table.
If it helps, here is my script with hopefully helpfully renamed objects. My real world scenario has many articles, but this is a simple version - 2 publications each having 1 article (the same table).
/****** Scripting replication configuration for server MyInstance. Script Date: 3/14/2006 11:16:58 AM ******/
/****** Please Note: For security reasons, all password parameters were scripted with either NULL or an empty string. ******/
/****** Installing the server MyInstance as a Distributor. Script Date: 3/14/2006 11:16:58 AM ******/
use master
exec sp_adddistributor @distributor = N'MyInstance', @password = N''
GO
exec sp_adddistributiondb @database = N'distribution', @data_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData', @data_file_size = 4, @log_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData', @log_file_size = 2, @min_distretention = 0, @max_distretention = 72, @history_retention = 48, @security_mode = 1
GO
use [distribution]
if (not exists (select * from sysobjects where name = 'UIProperties' and type = 'U '))
create table UIProperties(id int)
if (exists (select * from ::fn_listextendedproperty('SnapshotFolder', 'user', 'dbo', 'table', 'UIProperties', null, null)))
EXEC sp_updateextendedproperty N'SnapshotFolder', N'C:ThisFolderMY2005DBWorking
epldata', 'user', dbo, 'table', 'UIProperties'
else
EXEC sp_addextendedproperty N'SnapshotFolder', 'C:ThisFolderMY2005DBWorking
epldata', 'user', dbo, 'table', 'UIProperties'
GO
exec sp_adddistpublisher @publisher = N'MyInstance', @distribution_db = N'distribution', @security_mode = 1, @working_directory = N'C:ThisFolderMY2005DBWorking
epldata', @trusted = N'false', @thirdparty_flag = 0, @publisher_type = N'MSSQLSERVER'
GO
use [DatabaseA]
exec sp_replicationdboption @dbname = N'DatabaseA', @optname = N'publish', @value = N'true'
GO
-- Adding the transactional publication
use [DatabaseA]
exec sp_addpublication @publication = N'PubAtoB', @description = N'Transactional publication of database ''DatabaseA'' from Publisher ''MyInstance''.', @sync_method = N'concurrent', @retention = 0, @allow_push = N'true', @allow_pull = N'true', @allow_anonymous = N'true', @enabled_for_internet = N'false', @snapshot_in_defaultfolder = N'true', @compress_snapshot = N'false', @ftp_port = 21, @ftp_login = N'anonymous', @allow_subscription_copy = N'false', @add_to_active_directory = N'false', @repl_freq = N'continuous', @status = N'active', @independent_agent = N'true', @immediate_sync = N'true', @allow_sync_tran = N'false', @autogen_sync_procs = N'false', @allow_queued_tran = N'false', @allow_dts = N'false', @replicate_ddl = 1, @allow_initialize_from_backup = N'false', @enabled_for_p2p = N'false', @enabled_for_het_sub = N'false'
GO
exec sp_addpublication_snapshot @publication = N'PubAtoB', @frequency_type = 1, @frequency_interval = 0, @frequency_relative_interval = 0, @frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = null, @job_password = null, @publisher_security_mode = 1
use [DatabaseA]
exec sp_addarticle @publication = N'PubAtoB', @article = N'MyReplTable', @source_owner = N'dbo', @source_object = N'MyReplTable', @type = N'logbased', @description = null, @creation_script = null, @pre_creation_cmd = N'drop', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N'manual', @destination_table = N'MyReplTable', @destination_owner = N'dbo', @vertical_partition = N'false', @ins_cmd = N'CALL sp_MSins_dboMyReplTable', @del_cmd = N'CALL sp_MSdel_dboMyReplTable', @upd_cmd = N'SCALL sp_MSupd_dboMyReplTable'
GO
-----------------BEGIN: Script to be run at Publisher 'MyInstance'-----------------
use [DatabaseA]
exec sp_addsubscription @publication = N'PubAtoB', @subscriber = N'MyInstance', @destination_db = N'DatabaseB', @subscription_type = N'Push', @sync_type = N'automatic', @article = N'all', @update_mode = N'read only', @subscriber_type = 0
exec sp_addpushsubscription_agent @publication = N'PubAtoB', @subscriber = N'MyInstance', @subscriber_db = N'DatabaseB', @job_login = null, @job_password = null, @subscriber_security_mode = 1, @frequency_type = 64, @frequency_interval = 0, @frequency_relative_interval = 0, @frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 20060314, @active_end_date = 99991231, @enabled_for_syncmgr = N'False', @dts_package_location = N'Distributor'
GO
-----------------END: Script to be run at Publisher 'MyInstance'-----------------
use [DatabaseB]
exec sp_replicationdboption @dbname = N'DatabaseB', @optname = N'publish', @value = N'true'
GO
-- Adding the transactional publication
use [DatabaseB]
exec sp_addpublication @publication = N'PubBtoC', @description = N'Transactional publication of database ''DatabaseB'' from Publisher ''MyInstance''.', @sync_method = N'concurrent', @retention = 0, @allow_push = N'true', @allow_pull = N'true', @allow_anonymous = N'true', @enabled_for_internet = N'false', @snapshot_in_defaultfolder = N'true', @compress_snapshot = N'false', @ftp_port = 21, @ftp_login = N'anonymous', @allow_subscription_copy = N'false', @add_to_active_directory = N'false', @repl_freq = N'continuous', @status = N'active', @independent_agent = N'true', @immediate_sync = N'true', @allow_sync_tran = N'false', @autogen_sync_procs = N'false', @allow_queued_tran = N'false', @allow_dts = N'false', @replicate_ddl = 1, @allow_initialize_from_backup = N'false', @enabled_for_p2p = N'false', @enabled_for_het_sub = N'false'
GO
exec sp_addpublication_snapshot @publication = N'PubBtoC', @frequency_type = 1, @frequency_interval = 0, @frequency_relative_interval = 0, @frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = null, @job_password = null, @publisher_security_mode = 1
use [DatabaseB]
exec sp_addarticle @publication = N'PubBtoC', @article = N'MyReplTable', @source_owner = N'dbo', @source_object = N'MyReplTable', @type = N'logbased', @description = null, @creation_script = null, @pre_creation_cmd = N'drop', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N'manual', @destination_table = N'MyReplTable', @destination_owner = N'dbo', @vertical_partition = N'false', @ins_cmd = N'CALL sp_MSins_dboMyReplTable', @del_cmd = N'CALL sp_MSdel_dboMyReplTable', @upd_cmd = N'SCALL sp_MSupd_dboMyReplTable'
GO
-----------------BEGIN: Script to be run at Publisher 'MyInstance'-----------------
use [DatabaseB]
exec sp_addsubscription @publication = N'PubBtoC', @subscriber = N'MyInstance', @destination_db = N'DatabaseC', @subscription_type = N'Push', @sync_type = N'automatic', @article = N'all', @update_mode = N'read only', @subscriber_type = 0
exec sp_addpushsubscription_agent @publication = N'PubBtoC', @subscriber = N'MyInstance', @subscriber_db = N'DatabaseC', @job_login = null, @job_password = null, @subscriber_security_mode = 1, @frequency_type = 64, @frequency_interval = 0, @frequency_relative_interval = 0, @frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 20060314, @active_end_date = 99991231, @enabled_for_syncmgr = N'False', @dts_package_location = N'Distributor'
GO
-----------------END: Script to be run at Publisher 'MyInstance'-----------------
We have a database we are replicating to about 8 SQL Express subscribers from a SQL 2012 SP2 publisher. The size of the database grew too large for the 10GB license limit for SQL Express and now replication refuses to replicate any of our deletions on the publisher to reduce the size of the database. I've come up with a few options below.
1) Drop one of the larger table indices on the subscriber database to get below the size restriction. Permit the replication to replicate the deleted records and then rebuild the index. (I'm not sure how important an index is to this table. Is it merely performance related?)
2) "Upsize" SQL Express to SQL Standard on the affected boxes. Allow the deletes to replicate. Backup the database, downgrade to SQL Express and restore the database back to SQL a new SQL express instance. This would involve a lot of work on each box. I'd like to avoid it if possible.
Is there any way around (or will there be) using the drop-down? It takes several minutes when running against an Oracle Apps database to populate that dropdown with the several hundreds of tables and views.
TIA.
I have an environment with MS-SQL Server 2014 and always-on availability group configured (on 2-nodes).
I'm writing a Powershell Script which removes the database from the availability group (on the primary server) and then SHOULD drop the database on the secondary Server.
That works most of the time, but not always...
When it fails I get the error message:
Cannot drop database "Customer_2" because it is currently in use.
When i check the secondary DB-Server (sp_who2) while the script is running, i see that there is a process for the DB "Customer_2" with Status="background", Command="DB STARTUP" and LastWaitType="REDO_THREAD_PENDING WORK".
As soon as the script fails, this process for "Customer_2" disapears.
This happens always only on the second database in the availability group.
Why is the process still there, even after I removed the database from the Availability Group on the primary node.
If I remove the database from the availability group manually, the "background" process on the secondary node for that database disappears..
[URL]
Hi,I found this SQL in the news group to drop indexs in a table. I need ascript that will drop all indexes in all user tables of a givendatabase:DECLARE @indexName NVARCHAR(128)DECLARE @dropIndexSql NVARCHAR(4000)DECLARE tableIndexes CURSOR FORSELECT name FROM sysindexesWHERE id = OBJECT_ID(N'F_BI_Registration_Tracking_Summary')AND indid 0AND indid < 255AND INDEXPROPERTY(id, name, 'IsStatistics') = 0OPEN tableIndexesFETCH NEXT FROM tableIndexes INTO @indexNameWHILE @@fetch_status = 0BEGINSET @dropIndexSql = N' DROP INDEXF_BI_Registration_Tracking_Summary.' + @indexNameEXEC sp_executesql @dropIndexSqlFETCH NEXT FROM tableIndexes INTO @indexNameENDCLOSE tableIndexesDEALLOCATE tableIndexesTIARob
View 2 Replies View Relatedwhen I do DROP DATABASE I'm getting errors because it's in use. But if I do a delete from the mgmt studio gui I have the option to close all connections as part of the delete. Is there a way to achieve the same effect from a sql script?
View 7 Replies View RelatedI need some help with Merge Replication. After successfully defining a publisher, distributor and subscriber to perform merge replication, we decided to test Merge Replication to see what we can and can't do.
What we found is that you can't add new fields or change the nullable/null attributes of tables whilst the replication settings are still defined to the databases. ie you get the following error
'tblProducts' table
- Unable to modify table.
ODBC error: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot drop the table 'dbo.tblProducts' because it is published for replication.
So we thought, fair enough. We decided to uninstall replication using the wizards provided to see whether we can make schema changes. What we found is that we can make schema changes to the publisher database(on Server1), BUT not to the subscriber (Server2).
Does anyone know why? We are running SQL7 SP2.
Email me on ftowicz@icontact.com.au
Dear friends
I restore one database in two database servers which is running on SQL server 2000.I replicated these two through snapshot relication.Snapshot agent is creating snapshot.But when I am starting to synchronize it's telling can't drop table because that table is in replication. Backup I taken from a replicated database.so it's having rowguid both the servers.Another thing the table which it is telling not able to drop it's having primary key.please tell me what may be the problem.In replication why it is going to drop table it's only what to transport data na
Filson
Good morning folks,
I'm getting the above error message when trying to drop a table. I'm not to familiar with the setup of this SQL server, so I not sure if the replication is enabled. I have never had to use replication so I don't know to much about it. Does anyone know how I guess to remove this table from the replication list so that it could be dropped?
Thanks much
Dom
Hi,
I tried with success to replicate a table_test_repl from my local server to an other server.
I used only one table for testing.
After that, i can't drop the 2 tables a_test_repl (on my local server and the other : I've got a message 'cannot drop the table because it is published for replication'
What can I do? I need absolutely to drop these tables to keep a clean model
and I can't drop the database and try again.
Thanks to your answers
Axel
I am executing sp_dropmergesubscription, but the rows are still in dbo.msmerge_subscriptions, and are still shown in the replication monitor as expired; the last synch dates were in april (expiration is set to 10 days). The 'expired subscription clean up' job appears to be running okay. I need to remove these subscriptions from the publisher as the subscribers are mobile devices, which sometimes are lost.
Hi Gurus,
We have a SQL 2000 DB1 ( publisher) which is replicated using transactional replcation onto the secondary server DB2 ( subscriber). we have identity columns on the DB1 and we created those tables with 'not for replication' clause. we skipped the following errors in the replication profile '2601:2627:8102:20598'. on DB2 ( the subscriber ) some records are missing in some tables . ( I verified this with record count differences for some tables in both the servers DB1 & DB2.
How to find out what are all the records missing & the cause.
I have listed the msrepl_errors table on DB1 , distribution databases all I'm seeing there are error code 8102 , unable to update identity column.
Any Idea is appreciated.
- Thanks
Jay
I have two program (App1 And App2) on two separate system.on App1 there is a database named DB1 and on App2 there is a database named DB2.on DB1 i create a table named Table_1 .i define replication for DB1 to push publication (for table_1) .
I define DB2 as a subscriber to receive all changes on [DB1].[Table_1]. every thing is ok but just one thing. when App1 and App2 both are running if i change the contents of [DB1].[Table_1] this change only shown if one time i exit from App2 and rerun it . how can i refresh App2 without rerun it?
A friend said to me it is possible with trigger, but how? I don't know how can i define a trigger for this reason . or any way that exist for this reason.
I'm in a middle of a project where replication established between Oracle 8i and SQL server 2005. Now we need to drop one column from on of the tables replicated from Oracle side. My question : Is there anyway I can do this in Oracle and automatically reflected on SQL server? If not what is the proper steps to do it. Realy appreciate your fast response.
Regards
Hello,
My company is moving to a SQL Server-based packaged application early next year. We€™re planning our SQL Server architecture but have some questions that I can€™t readily find answers for. I€™m hoping someone here can point me in the right direction.
We have three servers, I€™ll call them A, B, and C. We want to duplicate all changes to certain databases on server A to server B, then duplicate changes to selected databases and tables on server B to server C.
Ideally we€™d run SQL Server 2005 Enterprise Edition on all three servers, but the packaged application vendor does not support SQL Server 2005 yet, only SQL Server 2000. Our license agreement with them does not allow us to use replication on server A. We€™re free to do whatever we want on our other SQL Servers, but server A must sit alone, untouched, like a monolith on a far-away moon. (I€™m lobbying to have the server named Tycho, or TMA2.) Stranger still, they€™re OK with log shipping from server A to other servers. We€™ve tried to explain that replication and log shipping are both core function built into SQL Server, and that if one is acceptable, then both should be. Their fear is that replication could cause performance and stability problems, and to eliminate this possibility they€™re ruling out replication on server A.
Given these constraints we€™re resigned to using SQL Server 2000 Enterprise Edition on servers A and B, and SQL Server 2005 Enterprise Edition on server C. We plan on periodically shipping logs from server A to server B and applying them at server B.
We€™d like to know if it is possible to also use transactional replication on server B to duplicate changes from server B to server C. I€™ve used log shipping and replication in the past, but never at the same time. My understanding is that a database goes into recovery mode while a transaction log is being applied and that any user changes to the database after the log has been applied will cause later log applications to fail. The scripts I€™ve seen that are used to apply the transaction logs put the database into single user mode after the log has been applied to prevent this.
This raises a few questions:
If we try to RESTORE a log to a database being used as a source for transactional replication articles, will the RESTORE fail? Or will the RESTORE start and break the transactional replication? I€™ll test this on my own, but it€™d be nice to know if anyone has already experienced this.
Is it possible for us to have a database in read-only mode serve as the source for transactional replication articles? (I can€™t imagine why not, ever though it seems counter-intuitive - why would you want to replicate transactions from a database that has no transactions?)
If the answer to number two is yes, can we suspend transactional replication on a database, RESTORE a log to the database, put the database into read-only mode after the RESTORE, and restart the replication on the database?
Thanks in advance for sharing your wisdom, everyone!
--
Thomas C. Mueller
In Transactional Replication -while Publisher, Distributer & Subscriber are on same instance- can I have additional columns in destination Table & set "Action if name is in use" for related Article to "Keep existing object unchanged"?
I do this but even Snapshot is not transfered to destination table!!
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Hi,
I was trying to drop a table (or alter it in any way) and the Managment Studio Express gave me an error of timeout. So I say something like DROP TABLE myTable, and it takes a while and gives me the error. Does anybody know how to unlock a table?
Thanks
Hi
View 4 Replies View RelatedHi,
When i try to run a package,its giving the following error.
What could be the possible reason for the error?
" Error: Unable to retrieve column information from the data source. Make sure your target table in the database is available. "
I am trying to delete a database that is labeled suspect. Is there a way to force a drop of a database? It is shows it is marked inaccessible when trying to delete.
Thanks, Steve
anyone know how to drop my databse on sql pleasee
charles
I am trying to drop a database, but keep getting the following error."cannot drop database 'blah' because it is currently being used forreplication".This db is not currently being replicated, but once was. It is thesubscriber side of an old replication pair.Can anyone tell what I have to do to make this go away?Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHello everyone!I'm from El Salvador and i have a problem, i have a sybase systemrunning on windows 2000 server, probably a programmer drop adatabase...but i dont know who did it?, is it possible to know who dropthe database?, if the answer is yes... plese help me, because we need tosolve this security problem in our company.Sybase saves all the TSQL and transaction somewhere?,Saludos....--Posted via http://dbforums.com
View 1 Replies View RelatedI'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies View RelatedI have been trying to populate my dropdown list with State names in the USA. The dropdown list populates fine, but when I hit the submit button I receive the following message:
Could not find stored procedure 'Maryland'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Could not find stored procedure 'Maryland'.
Source Error:
Line 81: Dim sqlCmd As SqlCommand = New SqlCommand(sqlText, sqlConn)
Line 82: sqlCmd.Connection.Open()
Line 83: dr = sqlCmd.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Line 84: Return dr
Line 85: End Function
Source File: c:inetpubwwwrootCreditRepairAdd_Customer.aspx.vb Line: 83
Stack Trace:
[SqlException: Could not find stored procedure 'Maryland'.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +742
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) +45
CreditRepair.CreditRepair.Vb.Add_Customer.GetDr(String sqlText) in c:inetpubwwwrootCreditRepairAdd_Customer.aspx.vb:83
CreditRepair.CreditRepair.Vb.Add_Customer.drpState_SelectedIndexChanged(Object sender, EventArgs e) in c:inetpubwwwrootCreditRepairAdd_Customer.aspx.vb:163
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e)
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent()
System.Web.UI.Page.RaiseChangedEvents()
System.Web.UI.Page.ProcessRequestMain() +1099
Can anyone help?
I have a DDL Trigger that writes a record into a table when any DDL event happens.
It works great except when I try dropping any object. I get an error at that point and the object is not dropped. The trigger and error are listed below.
Thanks.
J
Trigger:
/****** Object: DdlTrigger [MonitorDBChanges] Script Date: 07/24/2007 11:02:02 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TRIGGER [MonitorDBChanges]
ON DATABASE
FOR DDL_DATABASE_LEVEL_EVENTS
AS
set nocount on
declare @EventType varchar(100)
declare @SchemaName varchar(100)
declare @ObjectName varchar(100)
declare @ObjectType varchar(100)
declare @Script varchar(2000)
SELECT
@EventType = EVENTDATA().value('(/EVENT_INSTANCE/EventType)[1]','nvarchar(max)')
,@SchemaName = EVENTDATA().value('(/EVENT_INSTANCE/SchemaName)[1]','nvarchar(max)')
,@ObjectName = EVENTDATA().value('(/EVENT_INSTANCE/ObjectName)[1]','nvarchar(max)')
,@ObjectType = EVENTDATA().value('(/EVENT_INSTANCE/ObjectType)[1]','nvarchar(max)')
,@Script = EVENTDATA().value('(/EVENT_INSTANCE/TSQLCommand/CommandText)[1]','nvarchar(max)')
-- Is the default schema used
if @SchemaName = ' ' select @SchemaName = default_schema_name from sys.sysusers u join sys.database_principals p
on u.uid = p.principal_id where u.name = CURRENT_USER
insert into MonitorDBChanges
select @EventType, @SchemaName, @ObjectName, @ObjectType, getdate(), SUSER_SNAME(), CURRENT_USER, ORIGINAL_LOGIN(),@Script
GO
SET ANSI_NULLS OFF
GO
SET QUOTED_IDENTIFIER OFF
GO
ENABLE TRIGGER [MonitorDBChanges] ON DATABASE
*******************************************************************************
Error Msg:
SELECT failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods. (Microsoft SQL Server, Error: 1934)
Hi, I need help please!
I get the following error on my OLE DB Destination: column"Oprcode" cannot convert between unicode & non-unicode string data type.
Please Assist on what i should do!
Regards
Hi
View 26 Replies View Related