Replication - Sp_MSget_subscription_guid Impossible
Sep 1, 2004
We currently have a pull transactional subscription running from a remote 'PublicationServer' in another country to our local server.
After restarting our fire wall we get the following error message:
"The process could not execute '{call sp_MSget_subscription_guid(16)}' on 'PublicationServer'."
This message is followed by another error message: "Another distribution agent for the subscription(s) is running.", although nothing was changed to the configuration and no SQL processes were started or restarted.
When we restart the distribution job manually it runs as if nothing happened.
Does anyone know what exactly caused the failure, and how to prevent it ?
Philip
View 1 Replies
ADVERTISEMENT
May 7, 2001
I have a table that has three fields:
CATEGORIES
----------
catID
description
parentCatID
Some categories have sub-categories. Therefore, some entries will have null
for parentID while others will point to another category.
I need to select all of the categories, but have them returned in the
correct parent/child order (parents BEFORE children). I can't seem to get this to work correctly. Is this not possible or am I just being stupid?? :)
Thanks for any assistance.
Mike V.
View 5 Replies
View Related
Jan 12, 2005
Hi! all
I need to store the output of two select statement in a Temporal Table inside a storeProcedure. and used them later in a Select statement in the same Procedure
CREATE PROCEDURE [update_Alarm_1]
declare @datetime1 ?????
declare @datetime2 ?????
[SELECT Coming
FROM Student_Log
where datepart(hour, AL_Coming) = 9
and
AL_State = 0 ] = @datetime1
[SELECT Coming
FROM Student_Log
where datepart(hour, AL_Coming) = 9
and
AL_State = 1 ] = @datetime2
[SELECT date_part( 'minute', datetime1 - datetime2 )] = @result
AS UPDATE [Time_Result]
SET [Comment] = @Comment_2
WHERE
( [result] = @result)
Thanks in Advance
View 1 Replies
View Related
Jan 12, 2005
Hi! all
I need to store the output of two select statement in a Temporal Table inside a storeProcedure. and used them later in a Select statement in the same Procedure
CREATE PROCEDURE [update_Alarm_1]
declare @datetime1 ?????
declare @datetime2 ?????
[SELECT Coming
FROM Student_Log
where datepart(hour, AL_Coming) = 9
and
AL_State = 0 ] = @datetime1
[SELECT Coming
FROM Student_Log
where datepart(hour, AL_Coming) = 9
and
AL_State = 1 ] = @datetime2
[SELECT date_part( 'minute', datetime1 - datetime2 )] = @result
AS UPDATE [Time_Result]
SET [Comment] = @Comment_2
WHERE
( [result] = @result)
Thanks in Advance
View 3 Replies
View Related
Mar 12, 2008
First of all, here's a description of the three tables involved in the query:
clients
id
name
services
id
name
clients_services
id
client_id
service_id
As you can imagine, I have a list of clients and each client can have several services assigned to him.
So, I have trying to come up with a query that would allow me to do display the following information inside a DataGridView without the use of any additional code:
I would like to be able to display all the services included in the services table and then, depending on the client that is currently selected, to have each of the services display a checkbox in the DataGridView showing the services currently assigned to that particular client. Something like this:
The services table has the following entries: Research, Consulting, Development, Data Protection and Design
The selected client id is "2"
That client has the following services assigned to him: Development and Design
The DataGridView should then display:
[ ] Research
[ ] Consulting
Development
[ ] Data Protection
Design
Is this possible without writing any code?
View 5 Replies
View Related
Aug 24, 2005
I've created a database : hotelselect * from hotel worksselect * from hotel where dpt='5' doesn't work : generate a errorAnyone has a explanation ?create table hotel ([hoteID] int IDENTITY (5000,1) NOT NULL,[dpt] ntext NOT NULL) ON [primary]
View 3 Replies
View Related
Aug 21, 2007
Hello everybody,
I'm trying to create a merge between 2 tables, the first coming from Oracle and the second resident on SQL 2005. The result I'd like to retrieve would be a table composed from the original data contained in the SQL table, update with new or changed rows coming from Oracle (the 2 tables are identical, I'm building an update job..). The final table will be the same table used for data source.
I setup connections and everything seems to works, but when I link the Merge block with the 2 sources blocks, double clickin on the Merge Block, I notice that every SQL table's column is set to "ignore".
When I try to change it, SSiS says:
Failed to set property "OutputColumnLineageID" on input column ...
What's wrong? I've set IsSorted property to True and each column with the righ position...
I've also another question: actually my tables hasn't a "last update" column, so I think the merge "block" can't just update the SQL existing rows but it will add only newest rows. Is that right? How can I easily implement an "update check" in your opinion?
Thanks in advance and sorry for my bad english
View 1 Replies
View Related
Jul 20, 2006
I've been fighting with this all day there has to be an easy way to do this in a single query:
FOR EACH fac_id, get the INSPECTION_ID of the earliest start_date:
INSPECTION_IDFAC_IDSTART_DATE
3007200406280045662004-07-07
3007200306180025662003-06-25
20082002121901114362002-12-19
30072003020600214582003-02-03
30072003020600314582003-02-05
30072003012100214802003-03-25
30072003012100314802005-02-02
20082003123000114362003-12-30
30072004061600615662004-08-26
30072004061600115662001-08-26
30072004061600515662002-08-26
30072004061600215662003-08-26
30072004061600315662004-08-26
30072004061600415662006-08-26
30072004050400415692004-09-10
DESIRED OUTPUT
INSPECTION_IDFAC_IDSTART_DATE
3007200306180025662003-06-25
20082002121901114362002-12-19
30072003020600214582003-02-03
30072003012100214802003-03-25
20082003123000114362003-12-30
30072004061600115662001-08-26
30072004050400415692004-09-10
Am i missing something...
any help would be greatly appreciated...
View 1 Replies
View Related
Jul 20, 2006
I've been fighting with this all day there has to be an easy way to do this in a single query:
FOR EACH fac_id, get the INSPECTION_ID of the earliest start_date:
INSPECTION_IDFAC_IDSTART_DATE
3007200406280045662004-07-07
3007200306180025662003-06-25
20082002121901114362002-12-19
30072003020600214582003-02-03
30072003020600314582003-02-05
30072003012100214802003-03-25
30072003012100314802005-02-02
20082003123000114362003-12-30
30072004061600615662004-08-26
30072004061600115662001-08-26
30072004061600515662002-08-26
30072004061600215662003-08-26
30072004061600315662004-08-26
30072004061600415662006-08-26
30072004050400415692004-09-10
DESIRED OUTPUT
INSPECTION_IDFAC_IDSTART_DATE
3007200306180025662003-06-25
20082002121901114362002-12-19
30072003020600214582003-02-03
30072003012100214802003-03-25
20082003123000114362003-12-30
30072004061600115662001-08-26
30072004050400415692004-09-10
View 2 Replies
View Related
Jul 23, 2005
Hello there!I am working with MS SQL Server 2000.I have a table function that takes an integer parameter and returns atable, and I can successfully use it like this (passing a literalas a parameter):SELECT * FROM MyTableFunction(1)or like this (passing a variable as a parameter):DECLARE @i AS intSELECT @i = 10...SELECT * FROM MyTableFunction(@i)Now, if I have another function -- a scalar function that returns aninteger, I cannot find a way to use it to specify the parameter valuefor the first function. For example, when I writeSELECT * FROM MyTableFunction( dbo.MyScalarFunction() )SQL Server issues the following complaint:Incorrect syntax near '.'.I am really perplexed: what I am doing wrong?Interestingly, if I re-write the second snippet asDECLARE @i AS intSELECT @i = dbo.MyScalarFunction()...SELECT * FROM MyTableFunction(@i)everything works just fine; however, this trick cannot be used as aworkaround because I need to pass result of one function as a parameterto another inside a view's code -- I cannot declare variables and writeany procedural code...Any ideas, especially workarounds, would be greatly appreciated.Thank you,Yarik.
View 2 Replies
View Related
Sep 23, 2005
Hi all,
I'm Trying to replicate the creation of an "xml" file that is currently created using a C++ application. I want to take that application out of the picture, but need to create the same format XML file because a step later in the production process uses this file, and I cannot change it.
The output format I am looking for is:<?xml version="1.0" encoding="utf-8"?>
<FUNDS>
<AMRGX>
<NAME>AMERICAN GROWTH D</NAME>
</AMRGX>
<AHERX>
<NAME>AMERICAN HERITAGE FUND</NAME>
</AHERX>
<AMRVX>
<NAME>AMERICAN INVESTORS GROWTH FUND</NAME>
</AMRVX>
.
.
.
</FUNDS>The problem I am having is that I cannot seem to get the level/node of the fund symbol (AMRGX, AHERX, and AMRVX in the example above) as it needs to be. I think this must be some non-standard use of XML, since the tag is really the data itself (?)
The closest I have been able to get so far is:
<FUNDS>
<SYMBOL>AMRGX</SYMBOL>
<NAME>AMERICAN GROWTH D</NAME>
</FUNDS>
<FUNDS>
<SYMBOL>AHERX</SYMBOL>
<NAME>AMERICAN HERITAGE FUND</NAME>
</FUNDS>
.
.
.As you can see (hopefully) I am able to get the data I need but cannot get:
(1) the FUNDS tag(s) to be the very highest level/root.
nor (2) the SYMBOL part (tag label?) to be the actual variable stock fund.
Am I 'splaining this well enough? I don't necessarily need all the code, since I know I haven't given enough info to help with that, but my basic question is - - Is it possible to get a variable TAG based on the table DATA?
I want my SYMBOL tag to be the actual SYMBOL for the stock fund.
Confused? Not as much as I am *LOL* I am new to the use of all but XML EXPLICIT use, so any help would be appreciated - at least regarding my two formatting questions.
Yes, I have (and am still) searching around BOL for my answers, but so I have found nothing that helps me out. Meanwhile, suggestions are welcome!
Thanks!
View 6 Replies
View Related
Sep 21, 2006
Hello,I am using SQL Server 2000 with SP4. I have a database with two fullbackups at 4:00 PM and 5:00 PM and a transactional log backup at 5:30PM. Is there a possible way to do a point in time restore to 4:30 PM,that is between two full backups?When I try to use the transactional log backup that is taken at 5:30, Ican never specify a time before 5:00 PM. Is the transaction logtruncated at each full backup? If so, even if you take transactionallog backup every ten minutes, and full backups every once in a while,there will be some point in time which cannot be recovered to, namelythe time between a transactional log backup and a full backup. Take alog backup at 4:50, and full backup at 5:00 and you can never recoverto 4:55, can you?Any insight on the topic will be appreciated,Regards,M. Baris Caglar
View 3 Replies
View Related
Aug 31, 2006
I hope anyone can help me with this. I am having problems connecting to the aspnet database. It
all started when I noticed that I could not log in to my webapplication
anymore under debug mode, although I was able to log in when remotely
accessing the website. I got the error message that the machineaspnet
user did not have access to the database: "Login failed for user
'GM-FEDORSASPNET' "This was highly peculiar and rather annoying so I tried several things to straighten this out, but it only made things worse!I
read that this had to with permissions of the database in question, al
though I could not understand why permissions suddenly had changed. I
tried to change the rights by attaching it to Management Studio Express
and defining an aspnet login, but that failed because a login under
that name was not accepted. I tried to make a copy of aspnet.mdf, delete the original and rename the copy to aspnet.mdf. When that didn't work, I then deleted the aspnet.mdf, counting on it that it would be regenerated automatically, but alas. I located the aspnet_regsql.exe tool to regenerate the database, but got the following error message: System.Web.HttpException:
Unable to connect to SQL Server database. --->
System.Data.SqlClient.SqlException: An error has occurred while
establishing a connection to the server. When connecting to SQL Server
2005, this failure may be caused by the fact that under the default
settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)What can I do?
View 4 Replies
View Related
Aug 17, 2007
I have images on which users may comment. Now I want to sort those images on the amount of comments each image has.I use custom paging in combination with ROW_NUMBERSo I want to sort items in one table based on the number of occurences of that item in another table...I have the following query (which doesnt work):SELECT *FROM(select ROW_NUMBER() OVER (ORDER BY mediaComments DESC) as RowNum,m.title,m.usercode,m.mediaid,mediaComments=(select count(*) from tblMediaComments where mediaid=m.mediaid)FROM tblAlbums a inner join tblMedia m on am.mediaid=m.mediaidleft join tblMediaComments mc on mc.mediaid=m.mediaidWHERE a.showTo=1group by m.title,m.usercode,m.mediaid) as InfoWHERE RowNum between @startRowIndex AND (@startRowIndex + @maximumRows-1)
View 9 Replies
View Related
May 13, 2008
Hi There,
I have a database which I attached to Sql Server 2005 Express (With advanced features) and enabled full text search. I created a FT catalog and FT index on a column and can successfully run the following query:SELECT expertise
FROM faculty_user
WHERE FREETEXT (expertise, 'Berry' )My issue is that full text search requires user instances to be turned off. Simply setting "User Instance=False" over in my web.config's connection string (in VWD) does not solve the problem.I still get the following error and I think it may be caused by my ASPNETDB. I can't find my connection string to ASPNETDB to turn off user instances and I can't diagnose my other connection strings because of it.Generating user instances in SQL Server is disabled
Here is a sample of my other connection strings:
<add name="myConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|myDatabase.mdf;Integrated Security=True;User Instance=False" providerName="System.Data.SqlClient"/>
From what I understand, I should also not be attaching the database from my connection string like this because it relys on User Instances? I am officially confused! Thanks for reading, -Derek
View 1 Replies
View Related
Mar 7, 2008
I am using the xp_cmdshell to run a batch file that is trying to open the Adobe Acrobat Reader.
When I run the batch file in the command prompt, it opens perfectly.
When I run it in SQL with xp_cmdshell, it returns the contents fine, and I notice it tries to open Acrobat, but it is under the username "system". And I cannot get it to load in a visible area, and for some reason it doesnt seem to load properly under system.
Any ideas? Any Suggestions?
Please advise.
Marco
View 3 Replies
View Related
Jul 24, 2007
When attempting to use the FTP task to download a file from a Mainframe system the task fails stating the filename as invalid because it doesn't begin with a "/".
Adding the slash to the front of the file name causes the mainframe to be unable to locate the file.
Commandline version of FTP.exe mimicks this behavior by working perfectly when the filename has no slash, and being unable to find the file when the slash is present.
Why does microsoft force a filename to start with a "/" and is there a way to make SSIS skip the validation phase for the FTP task?
View 7 Replies
View Related
Mar 21, 2007
Relative newb to SSRS here, but the answer to this question evades me; answers and insight are appreciated.
Report in question is an invoice form. It requires an absolutely bottom-of-page aligned footer that has databound elements.
This is so that whatever page that footer finally appears on will print in such a way that the address will align in a windowed envelope.
Ironically, Books Online gives this exact scenario in explaining headers and footers in SSRS, but they cleverly don't explain how an absolutely bottom-of-page-aligned and data-bound footer can be made to happen. Headers at absolute page top is obviously no problem. Footers at page bottom, not so much.
So, this is not a "page footer"--page footers are employed in the body. Also this footer is databound, so a page footer as it's known in SSRS is out the window anyway.
Most of the time this will print on a single page, but if it breaks to multiple pages, that footer needs to go all the way to the absolute bottom.
I grasp that the "report footer" for SSRS is just what appears at the end of any repeating controls that you've implemented in your body. Because SSRS uses this kind of repeating-control based idiom rather than a section-based idiom as Crystal does, this kind of (what I would consider very basic) positioning control is looking fairly impossible right now.
Among what I've tried:
--Page footer (can't; databound)
--Specifying a page break after the pre-footer controls, and/or a page break before the controls that make up the footer in their properties. This leads to unpredictable results with blank printed pages (as many as 8 for what previews as a 2-page report, how silly is that?).
--Putting in a page-height rectangle as part of the footer (with and without the page breaks mentioned above), with the idea of forcing a basically blank page at the end of the report so that the footer will go to the bottom. SSRS will go ahead and break the page anyway on long elements like that, which again leads to the "footer" being printed in the middle or top of the final page, or whereever it happens to fall.
I may be having to explain to my client that you can't get there from here, and they may have to redesign their report. Does anyone have any insight?
Thank you for your time in reading this.
View 14 Replies
View Related
Mar 4, 2008
Hello,
SQL Server Reporting Services 2005 (SSRS) is installed on Vista Ultimate.
I cannot access to the http://localhost/ReportServer page. IE posts an internal error HTTP 500.0 (after IE required a Windows account).
All the configurations of Reporting Services are OK. In the Log file, there is nothing: the Web Services does not seem to be launched.
By continuing the investigations in IIS 7 (activation of the €œRules of follow-up of the requests having failed€?, I found the error following:
IIS Trace Detail Highlights
No. EventName Details Time
53. MODULE_SET_RESPONSE_ERROR_STATUS Warning
ModuleName="IsapiModule", Notification="EXECUTE_REQUEST_HANDLER", HttpStatus="500", HttpReason="Internal Server Error", HttpSubStatus="0", ErrorCode="Syntaxe du nom de fichier, de répertoire ou de volume incorrecte. (0x8007007b)", ConfigExceptionInfo="" 09:02:33.716
Translation of the french sentence: ErrorCode="Incorrect syntax of the file name, the directory or the volume."
I made a full research on Internet and in the documentation at my disposal and I did not find anything which can advance me towards a beginning of solution€¦
Thank you with all for the assistance which you will be able to bring to me.
View 4 Replies
View Related
Jan 29, 2008
Hye all, running WHS 2008, I try to install SQL Server 2005 with reporting services, but on install, in "components to install" wizard, the reporting services box is hided. I can't check this box :/ Do you know whats wrong ? if anyone knows the problem, thanks in advance.
View 1 Replies
View Related
Jun 15, 2007
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies
View Related
Sep 13, 2007
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies
View Related
Jan 17, 2002
Hi,
In my production box is running on SQL7.0 with Merge replication and i want add one more table and i want add one more column existing replication table. Any body guide me how to add .This is very urgent
Regards
Don
View 1 Replies
View Related
Aug 22, 2007
Hello,
I have this problem on a Production database.
DBCC OPENTRAN shows "REPLICATION" on a server that is not configured for replication. The transaction log is almost as large as the database (40GB) with a Simple recovery model. I would like to find out how the log can be truncated in such a situation.
Thank you.
View 4 Replies
View Related
Mar 6, 2007
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies
View Related
May 26, 2015
What is the main difference between snapshot and transactional and merge replication?
View 5 Replies
View Related
Jul 28, 2006
Hi,
I have a VB.net app that access a SQL Express database. I have transactional repliaction set up on a SQL 2000 database (the publisher) and a pull subscription from the VB.net app. I use RMO in the VB app to connect to the publisher. My problem is I am getting some strange behaviour as follows
- if I run the app and invoke the pull subscription it works fine. If I then close my app and go back in, I can access my data without any problem
- If I run the app and try to access data in my SQL Express database it works fine. I can then close the app, reopen it and run the pull subscription it works fine
however.......
- if I run the app, invoke the pull subscription (which runs fine), and then try to access data in my local SQL Express database without firstly closing and reopening the app, I get a login error
- if I run the app, try to access data in my local SQL Express database (which works fine), and then try to run the pull subscription I get a "the process cannot acces the file as it is being used by another process" error. In this case I need to restart the SQL Express service to be able to run replication again.
I get exactly the same behaviour when I use the Windows Sync tool (with my app open at the same time) instead of my RMO code to replicate the data.
I am using standard ADO.Net 2 code to access my SQL Express data in the app and closing all connections etc
Any advice appreciated !
Thanks
Ronan
View 2 Replies
View Related
Jun 28, 2007
Hi all,
I have recently setup a transactional replication in MS SQL 2000. After setting up the replication the clients TempDB grew by almost 60GB. Now the client is Blaming me for the TempDB GROWTH and saying that its because of the replication being setup i tried to convince them but they are not satisfied yet. Can anybody please tell me does replication cause the tempdb to grow. If yes then how. can u suggest any good link for getting to know the internal working of SQL Server replication????
Thanks in advance
Jacx
View 3 Replies
View Related
Aug 30, 2007
Hi all,
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I am using SQLSERVER 2005 (SP1).
View 3 Replies
View Related
Sep 2, 2015
I have been researching on the proper steps or sequence to follow to completely remove SQL Server 2012 Transactional Replication. Â I have read articles about using SSMS as well as using replication stored procedures and some procedures use SQLCMD or just regular TSQL executed in SSMS. Â I have also read articles where people said all you really need is connect to the Publisher instance, find the publication you want to remove and choose "Delete" and everything will be taken care of behind the scene. I have three SQL servers that participate in transactional replication. Â SQL-P (publisher),Â
SQL-D (distributor) and SQL-S (subscriber). Â Do I need to connect to the distributor instance and the subscriber instance when removing transactional replication or is it just really connecting to the publisher and click delete on the publication? I want everything gone including any metadata, systems tables, distributions db and any other replication objects created during the initial configuration.
View 6 Replies
View Related
Apr 17, 2007
Hello everyone,I am involved in a scenario where there is a huge (SQL Server 2005)production database containing tables that are updated multiple timesper second. End-user reports need to be generated against the data inthis database, and so the powers-that-be came to the conclusion that areporting database is necessary in order to offload report processingfrom production; of course, this means that data will have to bereplicated to the reporting database. However, we do not need all ofthe data in the production database, and perhaps a filtering criteriacan be established where only certain rows are replicated over to thereporting database as they're inserted (and possibly updated/deleted).The current though process is that the programmers designing thequeries/reports will know exactly what data they need from productionand be able to modify the replication criteria as needed. For example,programmer A might write a report where the data he needs can beexpressed in a simple replication criteria for table T where column X= "WOOD" and column Y = "MAHOGANY". Programmer B might come along amonth later and write a report whose relies on the same table T wherecolumn X = "METAL" and column Z in (12, 24, 36). Programmer B willhave to modify Programmer A's replication criteria in such a way as toaccomodate both reports, in this case something like "Copy rows fromtable T where (col X = "WOOD" and col Y = "MAHOGANY") or (col X ="METAL" and col Z in (12, 24, 36))". The example I gave is reallytrivial of course but is sufficient to give you an idea of what thecurrent thought-process is.I assume that this is a requirement that many of you may haveencountered in the past and I am wondering what solutions you wereable to come up with. Personally, I believe that the above method isprone to error (in this case the use of triggers to specifyreplication criteria) and I'd much rather use replication services tocopy tables in their entirety. However, this does not seem to be anoption in my case due to the sheer size of certain tables. Is thereanything out there that performs replication based on complexprogrammer defined criteria? Are triggers a viable alternative? Anyalternative out-of-the-box solutions?Any feedback would be appreciated.Regards!Anthony
View 11 Replies
View Related
Oct 9, 2007
I am working on bringing our disaster recovery site to be a live site. Currently we replicate to one of out servers (server B) with merge replication (from server A). Server A also does one way transactional replication form some table to several other servers including servers at the DR site.
This setup is not going to be fast enough for what we need so I am wondering if a table is receiving merge replication will the merge updates also replicate down the transaction path??
Example...
Server B update a row and merges to Server A. With this update them replicate (via transactional) to Server C??
thanks...
View 5 Replies
View Related
Nov 9, 2006
I have a wired situation..!I set up transactional replication on one of my development server (SQL2000 Dev Edition with sp4).It is running fine without any issues and all of a sudden, i noticed inmy repication monitor tab under Publisher where I usually see thepublication is empty now.I do see the snapshot agent, log reader and distribution agent under myagents inside the replication Monitor. But its usefull to see all 3agents in one window under publisher before. What happend? Is there anyway to get that inside that monitor? Has someone encountered thissitation before? Please advise....After that I tried to create a new set of replication on differentdatabase on the same server and i dont see those either underReplication Monitor - Publishers....All it says is (No Items)....I would appreciate any help to correct this issue... Thanks in advance..
View 2 Replies
View Related
