Hi,
I am doing a repl.in SQL7/NT.
At time of 'Push Subscription wizard' - I used the option "Yes,Initialize the schema and data......" whereas I already had data and schema at the subscriber.
Now my question is what will happen now and how long will this process take(for approx5GB of DAta).
OR should I stop the process - it's already an hour when I started the process.
Any suggestion appreciated.
I have a snapshot & a transcation publication on Server A, and a pull subscription for each on Server B.
The distribution agent on ServerA has the error:
"The subscription(s) have been marked inactive and must be reinitialized. NoSync subscriptions will need to be dropped and recreated."
Any idea what caused this ..... Everything was fine for a week or so.
Does anyone know of any good books or publications on Replication ? I've got some DBA books that cover the basics, but I'd like something that helps explain the oddball situations.
SQL 2K
I am trying to pull subscription for a database but I always get the error message ...
Error 15004: Name cannot be null
What exactly have I done wrong
Plaese help
Thanks
Nneka Echebe
Trying to set up Merge Replication using FTP with PULL subscriptions on sql 2000
Are there any issues that anyone is aware of that may affect this working.
Does anyone have advice as choosing between merge replication and updatable subscriptions? I've read the documentaion, they seem to offer the same functionality, and I don't see any clear guidelines as to why to pick one over the other...any suggestions would be appreciated!
Ed
I have setup a pull subscription on the subscriber for transactional replication. The distribution job continues to run, but doesn't do anything because it says: The initial snapshot for publication 'man4' is not yet available.
How can I tell if the snapshot is running, and can I see the snapshot where it was created?
Hi all,
I am planning replication around a large SQL Database Server; 3 databases need to be replicated for reporting purposes.
My plan was to use Transaction Replication, as the Reporting database will be mostly read-only. However, we must add a whole bunch of additional, historical data to some of the tables of the reporting database that does not exist in the Publisher. I understand that changes can be made to subscriptions in Transaction Replication scenarios, ideally when the changes are few and far between. (Merge replication is excessive for our purposes.)
I don't want the additional historical data to be propagated back to the publisher. Is it possible that data is written to a subscriber in a Transactional Replication scenario without writing these updates to the Publisher? Given the nature of the data, there will not be conflicts between the historical data and the new changes applied from the publisher.
Any help would be much appreciated!
Thanks,
Faraz
I have created a Merge Subscription between two databases. I have set the security setting in the UNC folder of the publisher to allow 'Full Control' for 'Everyone'.
I have done various searches, google, here, etc. But cant seem to find much information to help me out.
When I create the subscription it says it was a success, but when I launch the replication monitor and click the publication it says its subscribers are uninitialized.
Can anyone help?
Cheers
Hi guys,
View 6 Replies View RelatedWhat's the relationship among replication, publication and subscription?
I want to create replication database, what things should I know first?
I made a DDL change to a published table. To do this, I had to remove the table from the article, modify two field sizes, save the table, and then add the table back to the publication. I did have to rerun the snapshot agent after this even though the new article is exactly the same (yes, I understand all rowguids are dropped and recreated).
So, at the subscription, I begin synchronization and it replicates every article, thus doubling the size of the subscription .sdf file. yes, it can be compacted and it cuts it back in half.
Question is how to prevent this behavior? Is it possible to create the rowguid before publishing the table/article and that way even if you go back and make a schema change that requires republishing you can avoid the nasty behavior of producing a new snapshot and and a doubling of subscription database size?
This particular merge publication is read-only. Every article is marked as 'download only.'
Ideally if schema change is needed to one table, I only want that table/article to require reinitialization.
Actually, if its a simple change like expanding a varchar by some chars I'd like to not have to republish the article at all.
keep dreaming?
Hi all,
I've been looking for the right stored procedure to create a push subscription for publication but i haven't had much luck so far. So I was wondering if you guys know which SP is appropriate, that'd be super great!! thanks guys!
note. the sp should run on the subscriber database.
thanks again
Hi There,
I wonder if anyone has run into this problem before.
I have inherited a SQL Server 2000 box with what appears to be a push subscription set up on it. However, the original Subscription database has long since been removed, leaving that box with what is essentially an orphaned push subscription.
We are trying to remove the subscription, but do not understand how. All documentation I have found keeps insisting that this be done at the subscriber database (which is for all effective purposes, destroyed).
How do I get rid of it?
Any ideas would be dearly appreciated.
Thanks.
Hi,
We are Using Transactional Replication with Updatable Subscription in SQL Server 2005 SP1.
Subscription Type : Pull Subscription
Mode : Continuous Running Mode
Conflict Resolution Policy : Publisher Wins.
I have a table "Sample" (which is part of replication) and it has got 3 triggers. All the triggers are set NOT FOR REPLICATION.
The first trigger Updates a column of the "Sample" table in which i inserted a record.
The second trigger inserts record in to another database table and also updates a column of the table "Sample".
The third trigger does not affect any tables, it is written for some manipulations with variables.
In this scenario when I insert a record in the Sample table of the subscription database, that record is visible in the table. But during replication, it shows conflict in the Conflict Viewer and removes the record from the Sample table of the subscription database. The record is not replicated to the publisher and the other Subscriber also.
But when I comment any one update in either the first or second trigger, the insert works fine without any conflict.
Is there any issue with firing two triggers in replication which is updating the same table? I also suspect the Order of Commands moving to the Publisher from the MSReplication_Queue table, becoz the conflict viewer shows the subscriber as the Conflict loser.
Is there any issue with msrepl_tran_version, Since the conflict is decided based on this id??
It would be helpful if u could reply soon.
Thanks and Regards,
Swapna.B.
Hi all,
I'm a rather newbie, not only to this forum but also to sql server having a question to the following issue:
Is it possible to drop/remove/delete the "orphan" of a merge subscription on one instance of sql server without having the (former) distributor/publisher (on other instance) available?
The background is: I had a small replication infrastructure with two instances (on two machines), one the publisher and distributor, the other the subscriber. Now it happened that the publisher/distributor machine was completely set up new without having the replication dropped in advance, what remained on the subscriber is now a database with all the merge/replication tables and the guid columns in the user tables.
Moreover this, an entry remained in the subscription saying that a subscription with the former publisher exists...
Can I remove these "orphans" without having to setup the instance again?
Thank you,
Andy
I'm trying out a set up as following:
SQL Server 2008 standard as the publisher
SQL Server 2012 express as the subscriber
and I tend to use web synchronization; there is no domain trust.
After following the instructions at MSDN for configuring web synchronization, I have an error that I can't get past - after creating the initial snapshot on the publisher, I try to run replmerg.exe at the subscriber and I always get this error:
"The subscription to publication 'TestReplication' has expired or does not exist."
If I refresh the publisher's "Local Publications" and look within the "TestReplication", it does show that the subscriber is a known subscriber. Likewise, if I refresh subscriber's "Local Subscription", it has an entry for TestReplication publication.
I already verified that the user used by Replisapi.dll has the read permission to the snapshot folder, is a member of PAL, is db_owner of the publishing database and distribution database. I am using self-signed certificate for this test and I have already installed the certificate at the subscriber machine so that HTTPS is trusted. I can run diagnosis from subscriber so I know subscriber can reach and logs are being left at the publisher's IIS.
Hi I want to Set up Such Merge Replication, Which can can Synchronize With out Network, Means Syncronization using CD.
Also When the Network connectivity will be available then it should do synchronization
I wants to transfer some file using CD only those changes to database which hasn't been synchronized, thats why Backup will not work.
Pls Help me, or tell me wether it is possible or not.
Tell me some work around, or ask me details,
You got to help me out, Otherwise I will loss trust in MSDN Forums.
Thanks in advance
Vishalgiri Goswami
This is strange.
We use Merge (pull) replication to get data from the "mother ship" updated to the laptops of 15 sales reps before they head out into the field, where they work disconnected. At end of day, they all reconnect and all the data is once again shared.
We've been having problems with the replication, but that's another topic.
This morning, I logged onto the server to check the replication monitor, and found that all of the subscriber names for that particular subscription are blank! They show the open/close bracket ( [] ) followed by the database name. This is under the My Publishers >> [server name] >> [publication name] node in the explorer tree. If I try to double-click on one of the subscribers to get their detail, I get tne message, "Replication Monitor could not open the Detail Window." and "Specified cast is not valid".
If I look at the publication in SQL Server Management Studio, all of the subscriber names show up just fine. But they do NOT show up under Replication Monitor.
No one touched the database over the weekend, and this was working just fine on Friday afternoon.
Has anyone seen this before? What to do?
I am using SQL 2000. How can I get my transactional replication reinitialized after it has failed with several attempts.
I know one way of doing it through enterprise manager and specifying the subscription to reinitialize. But this will apply the snapshot and will take long time.
Is there a fast way of doing it?
-Nipul
Merge replication fails on one node with error. The merge process could not update the list of subscriptions.
(Source: MSSQL_REPL, Error number: MSSQL_ REPL-2147201010)
Cannot insert duplicate key row in object 'dbo.sysmergepublications' with unique index 'nc1sysmergepublications'.
The duplicate key value is . (Source: MSSQLServer, Error number: 2601)The subscription could not be created.
(Source: MSSQLServer, Error number: 14057) works fine on other subscribers.
We have our replication environment with a separate SQL 2014 publisher, distributor and subscriber. We have a table named DPSP on 14 databases which is to be published via transactional replication to 1 subscription database.Â
The source tables are identical in name, schema and clustered index. We have created 14 tables in the subscription database with a suffix to the name (see below):
Â
Each table in the subscription database has its own uniquely named primary key and clustered index:
Below are the settings for one of the published article:
The same process is repeated for each DPSP table created in 14 separate publications. Snapshots are generated and subscriptions created successfully. After some time, the log reader starts to show the following errors in replication monitor:
2015-08-12 21:48:24.156 7 transaction(s) with 11 command(s) were delivered.
2015-08-12 21:49:04.233 5 transaction(s) with 7 command(s) were delivered.
2015-08-12 21:50:04.355 No replicated transactions are available.
2015-08-12 21:50:09.378 13 transaction(s) with 17 command(s) were delivered.
2015-08-12 21:51:12.168 No replicated transactions are available.
2015-08-12 21:52:12.306 No replicated transactions are available.
2015-08-12 21:52:32.337
[Code] ....
Hi
We have setup transactional replication between 2 databases on SQL Server 2000 SP3a (~70GB), using a concurrent snapshot (to prevent locking out of the live database) to initilaise the data and a pull subscription from the second database.
From analysing the msdistribution_history table in the distribution database on the subscriber it appears that the snapshot is being applied in a continuous loop to the subscriber database. Viewing the comments column in the msdistribution_history table we can see the following sequence of events occuring
Initialising
Applied script 'snapshot.pre'
Then it applies all the schema files .sch
Then it applies all the index files .idx
The it bulk copies the data in (bcp)
Then it creates the Primary Keys
Then it applies all the trigger files .trg
Then it applies all the referential integrity files .dri
These all complete successfully but then the process kicks off again immediately after reapplying the snapshot. We are unaware of any settings that may be causing this.
Any help on what maybe causing this would be much appreciated.
ERROR MESSAGE:
"Message: Incorrect syntax near 'NoteID'."
Here is a snipet from the output file:
2006-03-27 13:01:49.820 Skipping file 'NotesHistory_21.sch' because it has already been delivered for a previous article or by a previously interrupted snapshot.
2006-03-27 13:01:49.867 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON
2006-03-27 13:01:49.898 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:49.945 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON
2006-03-27 13:01:50.008 [17%] OLE DB Subscriber 'LUZERNV4-PDOSQL4': CREATE TABLE [dbo].[MSmerge_conflict_EFILE_MERGE_NotesHistory](
[NoteID] [int] NOT NULL,
[CaseRefNum] [int] NOT NULL,
[KeyField] [varchar](500) NOT NULL,
[KeyValue] [varchar](500) NOT NULL,
[Note] [varchar](800) NULL,
[NoteField] [varchar](100) NULL,
[ScanDocID] [int] NULL,
[PDF_ID] [int] NULL,
[RescanCode] [int] NULL,
[RescanNote] [varchar](100) NULL,
[AuditID] [bigint] NOT NULL,
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL
)
ꜽśã¹? êœ?Å›B 27 13:01î–”Å›è›ªç —êœ?Å›é”?Ä€Percent Complete: 17
2006-03-27 13:01:50.086 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON
2006-03-27 13:01:50.117 Preparing table 'NotesHistory' for merge replication
2006-03-27 13:01:50.164 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON
2006-03-27 13:01:50.195 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.258 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
alter table [MSmerge_conflict_EFILE_MERGE_NotesHistory] add origin_datasource_id uniqueidentifier NULL
2006-03-27 13:01:50.351 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
create nonclustered index [ncMSmerge_conflict_EFILE_MERGE_NotesHistory] on [MSmerge_conflict_EFILE_MERGE_NotesHistory] ([rowguid], origin_datasource_id)
2006-03-27 13:01:50.383 OLE DB Subscriber 'LUZERNV4-PDOSQL4': exec sp_MSsetconflicttable @article = N'NotesHistory', @conflict_table = N'MSmerge_conflict_EFILE_MERGE_NotesHistory'
2006-03-27 13:01:50.430 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.476 [17%] The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.Percent Complete: 17
2006-03-27 13:01:50.50é”?Ä€
2006-03-27 13:01:50.539 Applied script 'NotesHistory_21.cft'
2006-03-27 13:01:50.586 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.617 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.711 Percent Complete: 17
2006-03-27 13:01:50.742 {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.773 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.867 Percent Complete: 0
2006-03-27 13:01:50.898 Category:COMMAND
Source: Failed Command
Number: 0
Message: {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.961 Percent Complete: 0
2006-03-27 13:01:50.992 Category:SQLSERVER
Source: LUZERNV4-PDOSQL4
Number: 102
Message: Incorrect syntax near 'NoteID'.
2006-03-27 13:01:51.039 Percent Complete: 0
2006-03-27 13:01:51.070 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-03-27 13:01:51.133 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.180 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.226 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.258 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.305 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.336 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.383 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.414 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.445 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.492 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.523 The merge process will restart after waiting 60 second(s)...
As per attachment, i have been created replications but in local subscription it is not populated any thing at the same time, Subscription database has been created but tables is not populated as per publication table.
View 2 Replies View Related
It seems to me that if a scheduled SSRS report subscription fails ( Status Message - An error has occurred during report processing) , that I actually need to delete the subscription and reconfigure it from scratch. The scheduled job doesn't try to run again automatically (say the next Monday on a weekly Monday schedule).
Is there a way to "reset" a failed subscription without have to recreate the entire subscription?
Thank you
Devon Kyle
28638
SSCE_M_DUPLICATETABLE
Existing subscription already contains table included in the new subscription.
What are the possible causes of this merge replication error?
Could it be caused by a SQL Server Compact Edition User trying to sync their .sdf file after their subscription has already expired on the SQL Server?
Would you expect to see a different message if a SQL Server Compact Edition user tried to sync a subscriber database (.sdf file) with merge replication if it's been longer than the subscription retention period since their last sync?
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies View RelatedHi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies View RelatedHi,
In my production box is running on SQL7.0 with Merge replication and i want add one more table and i want add one more column existing replication table. Any body guide me how to add .This is very urgent
Regards
Don
Hello,
I have this problem on a Production database.
DBCC OPENTRAN shows "REPLICATION" on a server that is not configured for replication. The transaction log is almost as large as the database (40GB) with a Simple recovery model. I would like to find out how the log can be truncated in such a situation.
Thank you.
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies View Related
Hi,
We are migrating our reporting services database from one server to another.
What needs to be done to subscriptions to ensure they work properly. Will they automatically update as part of the migration, or is there a manual process.
We are using Reporting Services 2000 and will be using Reporting services 2000 as well on the new server.
Thanks
Hi all,
I'm creating data driven subscription for parameterized reports. I'm supposed to deliver one report to six different customers. But each customer can see only his own data in the report. This is not a problem. But the problem is I need another report in which all the data can be seen. When I create DD subsription, I chosed Auto increment option for the write mode under "
Specify delivery extension settings for Report Server FileShare" .
But then it creates seperate report for each parameter value. But it does not create the report which contains all the data for all parameter values. How can I make it without creating another report.
Also when I use overwrite option instead of Auto Increment, It creates only one reports. Does any one know why it happens?
Thanks