Reply

Replication Help Required !!! (reply) -Post Reply .

Hi MMWOPS ..

Extremely thanks for the reply . I am using transactional replication for the database . I will try with snapshot replication as you suggested .

You mentioned that it will work with Transactional replication only if the application uses the option ' with log ' for those transactions .

Can you let me know where can i set this option for transaction replication ?
I am sorry but i am not well versed with database replication procedures and management .

Thank you once again .

Yatin.

Plz Reply Me

 in sql server 2000 ,in query analyzer :for example i have a emp table ,when i execute a query ,i have to get the emp table column names with its data types...for example :empno  ---intempname -- varchar  like this...what is the query to get the output like this 

Reply

How am I able to read replies to any message? I used to be able to see the replies staggered under the original message...but not any more.

Help!
Toni

Reply

I am not using the SA account when I log in using windows authentication it seems to pick up my domain and active directory ID which is "usapp1dxd" it appears greyed out as well as the password on the login screen so you can't change it.


If you go into the management studio and right click on the server name in the left hand pane go to properties security the radio button for sql server and Windows authentication mode is selected.

NO!!! REPLY IS NOT WORKING!!!

Reply To Don Romano

For the begining thank for your reply. I started with a new job and I was hopeless when all normaly claimed things can't be done. I asked a lot of peoples who works on MSSQL(including SWYNK) for my problems(I know that I'm beginer on MSSQL) but they didn't knows any solution. And afterall I wrote that. For your ilustration, we develope information system for Invest company. Back is on MSSQL and client is in ASP.

>So... if you need a database you need to look at what needs to be done and >pick your DBMS that meets your requirements.
--I didn't resolve on which DB we will develope:((

--No named cursors
I mean that in general is using curosr names bootless. And you must deal with names...
In interbase:
DECLARE var1,2 INTEGER;
FOR SELECT column,column2 FROM TABLE WHERE ...
INTO :var1,:var2
BEGIN
some code in loop;
END

In mssql:
DECLARE ..
DECLARE crs CURSOR
FOR SELECT ...
OPEN crs
FETCH NEXT FROM crs INTO @var1,@var2
WHILE (@@FETCH_RESULT = 0)
BEGIN
some code in loop
FETCH NEXT FROM crs INTO @var1,@var2
END
CLOSE crs
DEALLOCATE crs
-I thing that in mssql it isn't elegant.
-problem with recursive procs
-you must deal with names
-If you can you may use named cursors in Interbase in fact


>-it don't know create resultset's from
>> stored procs asynchronously when in sp is something else then only one
>> select(problem if I want check access rigths to sp. for exapmle "...AS
>> CheckPrivilege( ... ) SELECT.." This is confusing if user runs large
>> query & he must wait until it creates the whole recordset...Armageddon goes
>> first... Here is a solution, but it isn't very elegant and in some
>> cases don't exists good solution
>
>I'm not sure if configuring SQL Server's "cursor threshold" parameter would solve this. "When
>set to -1, all keysets are generated synchronously. If the cursor threshold is set to 0, all
>keysets will be generated asynchronously."

-"cursor threshold" resolves it only in single select's and procedures with only one select's
-It's unacceptable when your your user runs large queries

>>-max of nested procs is 16.
>That is the limit in V6.5. In V7.0 the limit is raised to 32.
-cool:)

>Union operator can't be used in a Create View statement in V6.5 according to the documentation.
>Does Oracle support this? It appears that V7.0 of MSSQL will support UNION in a view.
-cool:))

>-It don't have good exception
> handling.(something like EXCEPTION, WHEN... (oracle, Intebase))
>
>There are whole sections on error handling in SQL Books OnLine depending on >how you are
>accessing SQL Server. Maybe it's as good as Oracle/Interbase... maybe not. I >don't seem to have a problem with it.

-Books are very feeble:(
-but I thing that it can't work with EXCEPTION blocs. Good Exception handling is important tool for fast developing of robust apps


-I used example(s) from INTERBASE because I worked more on it, but in Oracle it's alike.

I'm glad for good discussion
Beargie

Quick Reply ...

For a query like below ...
How do i have to select only the latest revisions,
if i need to filter last current revisions of each document ...
where the revision could be either alphabetical or even numerical ...

Presently I get all revisions with the below query ...
Note: csd_revi is the field of CSD table for revisions.

---

select distinct
csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi as "Document Reference No.",
csd1.csd_labl + ' ' as "Description"

from
E0437csd csd1,
E0437tra tra1,
E0437csd csd2,
E0437trd trd1,
E0437apr apr1,
E0437apc apc1,
E0437tra tra2,
E0437csd csd3,
E0437trd trd2

where
csd1.csd_orig = 'BS' and
csd1.csd_subj like '%WN1%' and
csd1.csd_type = 'D' and
tra1.tra_drgn = csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi and
tra1.tra_part = 'PARSO' and
tra1.tra_type = 'A' and
csd2.csd_orig + csd2.csd_subj + csd2.csd_type + csd2.csd_numb + csd2.csd_revi = tra1.tra_trno and
trd1.trd_trno = tra1.tra_trno and
trd1.trd_cc = '0' and
trd1.trd_part = 'PARSO' and
apr1.apr_docu = csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi and
(apr1.apr_stat = apc1.apc_code or apr1.apr_stat = '') and
tra2.tra_drgn = csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi and
tra2.tra_part = csd1.csd_ownr and
csd3.csd_orig + csd3.csd_subj + csd3.csd_type + csd3.csd_numb + csd3.csd_revi = tra2.tra_trno and
trd2.trd_trno = tra2.tra_trno

order by
csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi

---

Life is beautiful ... When you smile ...

REPLY NOW! -- SQL Server 7.0 Problem

I've gotten everything to work -- almost!
Here's the scoop... I'm using SQL Server 7.0 and ColdFusion (you don't need to know anything about ColdFusion). I'm trying to get SQL Server to publish/share/etc. a database with the network so ColdFusion (our website management/creation program) can access it and use it in a webpage. Well, so far, ColdFusion can detect and access the database (called "iami"), but it cannot find any tables in the database (particularily one called "phase1"). Can anyone help me -- the sooner the better -- ???

If you reply before 4pm today and offer truly helpful advice/input, I'll send you a reward/incentive from me personally (just give me your mailing address) just for helping out!!! :-)

MY HELP!!!!! Request.....ONLY 1 Person Reply.

I can believe it, 40 people read my sql query problem and ONLY ONE reply to my request for help.

Thanks!!!! It's great to know that we help each other in this community.

Blocking Info! Ray Miao, Please Do Not Reply!!

Can anyone help me with handy scripts/stored procedures to capture blocking info on the server? We have SQL 7.0 w/sp3.
Ray replied earlier saying that I can use so_who2!!, I think everyone knows that,please reply with some valuable info!!Please..
Thanks.
Sonali.

Restore Individual Filegroups (reply)HELP!!!!!!

I think jthis is a bug. I have a table created and populated on its own filegroup. I backup the db(all filegroups) and the trans log then I drop the one table. When I try to restore from my backups, it insists that I back up the trans log again. I do, then do the restore of both the filegroup and the trans log. The restore finishes, but my table is still not there and I can never get it back.

Any one with comments please help
Brad kreuzburg

DataBase Recovering Please - Need Fast Reply

What should I have done? Is there anything that can be done other than restoring from backup?
How does one know if the database is really recovering or is EM just joken? I can wait 2 hours
before starting the restore

I was BCPing 12 million rows into a staging table. II used the '-b' option every 20K which I thought
would do a commit and clear the log in batches. After the process EM appeared to show the transaction log
as empty. Upon inspecting the Bcp output file I discovered the message that the BCP did not complete
because syslogs was full. I could not do a truncate transaction log or a dump database. I tried to
do a truncate transaction with no_log and it appeared to just hang. I stopped the SQL Server thinking
I could dump the transaction log, but could not start the Sql Server again. I then stopped the NT Server
because 'if all else fails'. The SQL Server started but the user database if marked as recovering.

Is Discussion Board Reply Working

I cannot reply to any messages of the board? Is anyone else having this problem?

I see from the board that there haven't been any replies for a few days...

Jarlath O'Grady
mailto:jogrady@swynk.com
http://www.swynk.com/friends/ogrady

Loop For INSERT ? [ Fast Reply Please ]

Hi everyone
I want to know if it's possible to do a for/while-loop so i can use INSERT

Look:
I've this int [] test = new test[140];
But i need to insert for every value (140) a number
so normally it would be :
INSERT ... (case1, case2, case3 ...) value (test[1],test[2],test[3] ...)
But isn't there a way to it with a loop?
SOmething Like this ?

for( int i = 0 , i< 140, i++) {
INSERT case[i] value test[i]
}

Thanks in advance

Jonas

Question On Trigger/procedure Plz Reply?

Can it be possible to create trigger/procedurein following case2 server server A and server BA has db1db1 has tblAB has db2db2 has tblBcan it be possible to create trigger on server A.db1.tblA asinsert/update that trigger add/update record in server B.db2.tb2thnks-----------Hitendra

Reminder - Please Indicate If A Reply Has Answered Your Question.

How do I indicate a post answered my question?
While reading a reply to your question you will notice a button with this Icon: Clicking on it will mark the post as the answer to your question


Thanks!
Clifford Dibble

Reply-To On Data Driven Subscription

I have set up a data driven subscription for a report, and against "Reply-To" I have selected "Specify a Static Value".
I have then I have entered a valid email address.

When the report is received however, and the recipient clicks reply, the reply address is filled in as the Email Address from which the report was sent.

Is this a bug with the "Reply-To" functionality? Or do I have to do this a different way?

Thanks :-)
Kate

Changing A Reply To Another Question In The Same Thread

Is there a way to do this? When I have a further question in the same thread, my only option is to reply to the one who answered the last question. How do I put forward that question to everyone? Do I have to start a new thread with the same subject?

thx

Kat

PLEASE REPLY ASAP -- Importing Data Into SQL Server 7.0

I'm trying to import data into an SQL Server (7.0) and I'm wondering which Source (Microsoft Data Link, Microsoft ODBC Driver for Oracle, Microsoft ODBC Driver for SQL Server, etc.) -- I THINK we would use the SQL Server driver but I'm not sure... to use AND WHERE TO GO FROM THERE? So far, I get seem to get things to work in my favor. I appreciate any help :) The data I'm trying to import is from Microsoft Excell. If there is anything else you need to know, please email me at iami@iami.org Please provide email/forum-based technical support.

Back Up Problems Continued - Reply To Alex And Ray

Thanks for the replies but...

I doesn't work!!!!

Anymore ideas?

---------------------------------------------
Hi,

I have a rather odd problem that hopefully you'll be able to shed some light on (nobody else has come up with anythig sensible).

We want to back up the databases to a hard drive held on another server so I mapped the drive in explorer to the drive then went into Enterprise manager and tried to create a backup device and it won't see the mapped drive.

I've tried mapping to my PC and I can see that via enterprise managers backup stuff (infact any PC in the office works) but it won't see any of the servers even though we can map to them and access them via windows explorer.

I've tried when logged on via sa and the windows NT administrator and still no luck. In fact no matter what I type or do it fails and keeps telling me device error or device off line which it isn't.

On our test instance of SQL Sever we can backup to other servers but not the new live version!

Any thoughts on what might cause this to happen?

Helen

My Doubts On Revoked Users In MSSQL...please Reply

Hi

My doubts on revoked users in MSSQL...please reply

I have following doubts:

1. Is there any stored procedure provided by MS SQL server for checking whether the user is revoked or not?

2. What is the query for checking whether the particular user is revoked or not in MS SQL?

3. Do all revoked users get stored in separate database in MSSQL ?

Please reply.

My Doubts On Revoked Users In MSSQL...please Reply

Hi



I have following doubts:

1. Is there any stored procedure provided by MS SQL server for checking whether the user is revoked or not?

2. What is the query for checking whether the particular user is revoked or not in MS SQL?

3. Do all revoked users get stored in separate database in MSSQL ?

Please reply.

Connection String Options ...Urgent .. Plz Reply

Hi

In my project , we are using Dsn and DSN less connection, for certain functionality

we are providing users to select tables and views .

we don't want that all system tables and views are listed for selecting , how can we achieve this functionality?

Is there any options in the connection string for restricting system tables and views?

Any help is much appriciated



Thanks

Saurabh

Autogenerate Reply Or ServerProc Generated Message............

Hello,

I got my sample application to work that I am building my proof of concept out of. I need to be able to auto generate a reply message that would normally be in the run routine. The only way I see to do this is pull it from a table but I do not want to do that. I have tried tests where I change the code to see if I can send a message back but I have to reinstall the assembly into the database which is not what I am looking for. I am looking for a way to change the message by either accessing the GUI and getting the string, calling another function to do this, or something like that. I want it so I can change the code in the run routine in VS 2005 but this does not work. I am sure their is a trick to do this but am not sure what that trick is. What is a good way to do this other than accessing a table in the database?

Thanks,

Scott Allison...

Windows Server 2003 And The Database Problem..plz Reply Urgent

hello all..

i am running an application build on c# and dot net frame work 2.0 running on windows server 2003 enterprise edition with service pack 2 on a Xeon Machine, when the application can to many data base request or face load...the date base service disappears...... can some buddy plz reply me how this problem can be resolve....