Hi all,
I have a column in SQL server which is of type ntext. Selecting the specific column to view it in report builder, an error message appears with the following description:
- Cannot run this report. The grouping expression 'nameofcolumn' returns the datatype binary. The Grouping Expression cannot return binary data.
Report Builder recognises this as if it was an image...
Thanks in advance!
Hi! ALL
I 'm writing an ASP.NET Application(1.1) , but i 've problem. I used ntext data type to store my data as follows
"Ä?ể sá» dụng các dịch vụ của VUNGOIMORA.COM bạn phải Ä‘á»?c kỹ các thông tin quy định và phải tuân thủ các Ä‘iá»?u quy định sau:
V� thông tin đăng ký thà nh viên:
Ä?ể có thể đăng ký là m thà nh viên của Vungoimora.com, bạn phải trên 18 tuổi và có đủ năng lá»±c để chịu má»?i trách nhiệm đối vá»›i má»?i hà nh vi của mình.
Bạn phải cung cấp đầy đủ, đúng và trung thá»±c các thông tin yêu cầu trong phần đăng ký thà nh viên(Há»? tên, Ä?ịa chỉ, Ä?iện thoại, Email….)
Má»—i tà i khoản chỉ được đăng ký má»™t lần và được kiểm tra sá»± chÃnh xác qua cÆ¡ chế chứng thá»±c bằng cách chúng tôi sẽ gá»i mail chứng thá»±c tá»›i địa chỉ Email mà bạn đã đăng ký
Sẽ có 3 dạng thà nh viên trên VUNGOIMORA.COM: thà nh viên bình thÆ°á»?ng(miá»…n phÃ), thà nh viên VIP(thà nh viên đóng phÃ), thà nh viên là chủ sở hữu eStore.
V� Tin đăng của bạn:
Các tin đăng(mua, bán, cho thuê, cần thuê, giới thiệu) phải đúng danh mục như thế ngư�i khác sẽ dễ dà ng tìm thấy tin đăng của bạn hơn.
Các tin đăng phải trung thá»±c chÃnh xác, không viết toà n chữ HOA, không mang tÃnh chất phá hoại là m ảnh hưởng tá»›i ngÆ°á»?i khác hoặc doanh nghiệp khác.
Ná»™i dung thông tin không được mang tÃnh chÃnh trị, không mang tÃnh tôn giáo, không được trái vá»›i phong tục táºp quán của Việt Nam, không được dùng lá»?i lẽ thô tục, thông tin không được mang tÃnh Ä‘e dá»?a, hay khiêu khÃch.
Không được đăng tin liên quan đến các thiết bị vÅ© khÃ, khiêu dâm, tin tặc...không được đăng tin quảng cáo hay rao bán những hà ng hóa mà Nhà NÆ°á»›c Việt Nam cấm.
Những thông tin được Ä‘Æ°a trên Vungoimora.com chỉ để giúp các bên mua - bán liên lạc vá»›i nhau, Vungoimora.com không can thiệp và o việc chuyển nhượng giữa các bên và không chịu trách nhiệm nếu xảy ra các vấn Ä‘á»? pháp lý giữa các bên (VD: lừa đảo, cÆ°á»›p, trấn lá»™t...). Vungoimora.com không có trách nhiệm bảo đảm tÃnh chÃnh xác, chất lượng, danh mục, tÃnh thÃch hợp, hay tiêu chuẩn của hà ng hoá. Bạn sá» dụng dịch vụ Vungoimora.com miá»…n phà là đang tá»± nguyện chấp nháºn rủi ro nếu có, chúng tôi không chịu bất cứ trách nhiệm nà o vá»? việc các bên lợi dụng dịch vụ trên Vungoimora.com để tiến hà nh các hà nh vi xấu. Tuy nhiên, chúng tôi cố gắng hết sức để đảm bảo tÃnh trung thá»±c của các thông tin Ä‘Æ°a lên Vungoimora.com để giảm thiểu rủi ro cho ngÆ°á»?i dùng dịch vụ. Chúng tôi dà nh quyá»?n khÆ°á»›c từ hay chấm dứt những dịch vụ cung cấp và o bất cứ lúc nà o cho ngÆ°á»?i dùng nà o đó mà không cần báo trÆ°á»›c.
Tin rao của bạn có thể bị xóa mà không cần thông báo.
Tin đăng trên Vungoimora.com là miá»…n phÃ, trong trÆ°á»?ng hợp bạn muốn tin đăng của bạn xuất hiện tại các vị trà đặc biệt của website Vungoimora.com hay có thêm má»™t số chức năng đặc biệt, chúng tôi sẽ thu má»™t khoản phÃ, bạn có thể xem thông tin chi tiết tại đây.
Các đi�u cần lưu ý khác:
Vungoimora.com không chịu trách nhiệm đối với m�i nội dung và thông tin mà các thà nh viên đăng trên web site, cũng như những liên kết từ vungoimora.com ra bên ngoà i
Vungoimora.com có thể sẽ gá»i email đến cho bạn theo má»™t chu kỳ nhất định. Những email nà y không thể xem là spam.
Vungoimora.com không chịu bất cứ trách nhiệm nà o trong trư�ng hợp máy chủ web bị hư, bị tấn công hoặc phá hoại hoặc do bất cứ lý do nà o là m tin đăng hay account của bạn bị mất nhưng Chúng tôi sẽ cố gắng khắc phục với khả năng tốt nhất của mình.
Không được cố ý thâm nháºp tà i khá»?an hà y sá» dụng tà i khoản của ngÆ°á»?i khác khi chÆ°a có sá»± đồng ý của há»?.
Vungoimora.com có toà n quyá»?n thay đổi ná»™i dung quy định nà y và o bất lúc nà o mà không cần phải thông báo , cÅ©ng nhÆ° không cần phải giải thÃch lý do thay đổi.
Chúng tôi cÅ©ng có quyá»?n thay đổi ná»™i dung web site Vungoimora.com bất kỳ lúc nà o mà không cần báo trÆ°á»›c. Chúng tôi dà nh quyá»?n thay đổi hay cáºp nháºt những Ä‘iá»?u khoản có trong bản thoả thuáºn sá» dụng dịch vụ nà y. Các bạn có trách nhiệm phải thÆ°á»?ng xuyên xem xét và cáºp nháºt những thay đổi nà y.
Bạn có trách nhiệm bảo vệ tà i khá»?an của bạn trên Vungoimora.com, thÆ°á»?ng xuyên thay đổi máºt khẩu và chịu trách nhiệm vá»? các há»?at Ä‘á»™ng của tà i khá»?an do mình sở hữu.
Nếu thà nh viên nà o đó vi phạm 1 hay nhi�u quy định ở trên thì tà i khoản của thà nh viên đó sẽ bị xoá mà không cần báo.
Nếu bạn Ä‘ang đồng ý tất cả các Ä‘á»?u khoản trên, hãy chá»?n "Tôi Ä?ồng ý" để tiến hà nh đăng ký thà nh viên.
Xin cảm ơn!"
but when display data, it displays as follows
" �? s? d?ng các d?ch v? c?a VUNGOIMORA.COM b?n ph?i d?c k? các thông tin quy d?nh và ph?i tuân th? các di?u quy d?nh sau:
V? thông tin dang ký thà nh viên :
�? có th? dang ký là m thà nh viên c?a Vungoimora.com, b?n ph?i trên 18 tu?i và có d? nang l?c d? ch?u m?i trách nhi?m d?i v?i m?i hà nh vi c?a mình.
B?n ph?i cung c?p d?y d?, dúng và trung th?c các thông tin yêu c?u trong ph?n dang ký thà nh viên(H? tên, �?a ch?, �i?n tho?i, Email….)
M?i tà i kho?n ch? du?c dang ký m?t l?n và du?c ki?m tra s? chÃnh xác qua co ch? ch?ng th?c b?ng cách chúng tôi s? g?i mail ch?ng th?c t?i d?a ch? Email mà b?n dã dang ký
S? có 3 d?ng thà nh viên trên VUNGOIMORA.COM: thà nh viên bình thu?ng(mi?n phÃ), thà nh viên VIP(thà nh viên dóng phÃ), thà nh viên là ch? s? h?u eStore.
V? Tin dang c?a b?n :
Các tin dang(mua, bán, cho thuê, c?n thuê, gi?i thi?u) ph?i dúng danh m?c nhu th? ngu?i khác s? d? dà ng tìm th?y tin dang c?a b?n hon.
Các tin dang ph?i trung th?c chÃnh xác, không vi?t toà n ch? HOA, không mang tÃnh ch?t phá ho?i là m ?nh hu?ng t?i ngu?i khác ho?c doanh nghi?p khác.
N?i dung thông tin không du?c mang tÃnh chÃnh tr?, không mang tÃnh tôn giáo, không du?c trái v?i phong t?c t?p quán c?a Vi?t Nam, không du?c dùng l?i l? thô t?c, thông tin không du?c mang tÃnh de d?a, hay khiêu khÃch.
Không du?c dang tin liên quan d?n các thi?t b? vu khÃ, khiêu dâm, tin t?c...không du?c dang tin qu?ng cáo hay rao bán nh?ng hà ng hóa mà Nhà Nu?c Vi?t Nam c?m.
Nh?ng thông tin du?c dua trên Vungoimora.com ch? d? giúp các bên mua - bán liên l?c v?i nhau, Vungoimora.com không can thi?p và o vi?c chuy?n nhu?ng gi?a các bên và không ch?u trách nhi?m n?u x?y ra các v?n d? pháp lý gi?a các bên (VD: l?a d?o, cu?p, tr?n l?t...). Vungoimora.com không có trách nhi?m b?o d?m tÃnh chÃnh xác, ch?t lu?ng, danh m?c, tÃnh thÃch h?p, hay tiêu chu?n c?a hà ng hoá. B?n s? d?ng d?ch v? Vungoimora.com mi?n phà là dang t? nguy?n ch?p nh?n r?i ro n?u có, chúng tôi không ch?u b?t c? trách nhi?m nà o v? vi?c các bên l?i d?ng d?ch v? trên Vungoimora.com d? ti?n hà nh các hà nh vi x?u. Tuy nhiên, chúng tôi c? g?ng h?t s?c d? d?m b?o tÃnh trung th?c c?a các thông tin dua lên Vungoimora.com d? gi?m thi?u r?i ro cho ngu?i dùng d?ch v?. Chúng tôi dà nh quy?n khu?c t? hay ch?m d?t nh?ng d?ch v? cung c?p và o b?t c? lúc nà o cho ngu?i dùng nà o dó mà không c?n báo tru?c.
Tin rao c?a b?n có th? b? xóa mà không c?n thông báo.
Tin dang trên Vungoimora.com là mi?n phÃ, trong tru?ng h?p b?n mu?n tin dang c?a b?n xu?t hi?n t?i các v? trà d?c bi?t c?a website Vungoimora.com hay có thêm m?t s? ch?c nang d?c bi?t, chúng tôi s? thu m?t kho?n phÃ, b?n có th? xem thông tin chi ti?t t?i dây.
Các di?u c?n luu ý khác :
Vungoimora.com không ch?u trách nhi?m d?i v?i m?i n?i dung và thông tin mà các thà nh viên dang trên web site, cung nhu nh?ng liên k?t t? vungoimora.com ra bên ngoà i
Vungoimora.com có th? s? g?i email d?n cho b?n theo m?t chu k? nh?t d?nh. Nh?ng email nà y không th? xem là spam.
Vungoimora.com không ch?u b?t c? trách nhi?m nà o trong tru?ng h?p máy ch? web b? hu, b? t?n công ho?c phá ho?i ho?c do b?t c? lý do nà o là m tin dang hay account c?a b?n b? m?t nhung Chúng tôi s? c? g?ng kh?c ph?c v?i kh? nang t?t nh?t c?a mình.
Không du?c c? ý thâm nh?p tà i kh?an hà y s? d?ng tà i kho?n c?a ngu?i khác khi chua có s? d?ng ý c?a h?.
Vungoimora.com có toà n quy?n thay d?i n?i dung quy d?nh nà y và o b?t lúc nà o mà không c?n ph?i thông báo , cung nhu không c?n ph?i gi?i thÃch lý do thay d?i.
Chúng tôi cung có quy?n thay d?i n?i dung web site Vungoimora.com b?t k? lúc nà o mà không c?n báo tru?c. Chúng tôi dà nh quy?n thay d?i hay c?p nh?t nh?ng di?u kho?n có trong b?n tho? thu?n s? d?ng d?ch v? nà y. Các b?n có trách nhi?m ph?i thu?ng xuyên xem xét và c?p nh?t nh?ng thay d?i nà y.
B?n có trách nhi?m b?o v? tà i kh?an c?a b?n trên Vungoimora.com, thu?ng xuyên thay d?i m?t kh?u và ch?u trách nhi?m v? các h?at d?ng c?a tà i kh?an do mình s? h?u.
N?u thà nh viên nà o dó vi ph?m 1 hay nhi?u quy d?nh ? trên thì tà i kho?n c?a thà nh viên dó s? b? xoá mà không c?n báo.
N?u b?n dang d?ng ý t?t c? các d?u kho?n trên, hãy ch?n "Tôi �?ng ý" d? ti?n hà nh dang ký thà nh viên.
Xin c?m on! "
please, let me know the solution for this problem. Thanks,
Have a table storing nText data tied into a Cold Fusion front end. The Cold Fusion returns the values fine, but when querying in Query analyzer the messages are being truncated. In Enterprize Manager I get a <Long Text> message.
I ran OBJECTPROPERTY and found that TableTextInRowLimit was set to 0, but even after i set it to 1 on our test system with a value of 2000, it still truncated.
Also, the field is set to ntext with a length of 16. I havent worked much with nText, anyone with advise would be much appricated.
Late
Matt
Hello guys,
I would like to execute a t-sql query and replace a string by another in all records.
I did this :
UPDATE myTable
SET myColumn = replace(myColumn,'old string','new string')
The error I get is :
Argument data type ntext is invalid for argument 1 of replace function.
Thank you very much for any help!
Regards,
Fabian
my favorit hoster is ASPnix : www.aspnix.com !
Hello,
When I am using DISTINCT in the SELECT clause for a table having a column of datatype "ntext" in SQL 2000 as well SQL 2005, it fails giving the error as "ntext data type cannot be selected as DISTINCT". This is coz
"The text, ntext, or image data type cannot be selected as DISTINCT."
But I am able to insert into a temporary table having a column whose datatype is nvarchar) using this SELECT clause in SQL 2000. Please advice me how this happens. If I am not worng, implicit conversion has happened. But this insert fails raising the same error in SQL 2005. Please help me to find the difference
thanks in advance!
Hi folks,
Table:
a int,
b int,
c int,
d text
I need to change my AFTER - Trigger from this (example!):
select * into #ins from inserted
to something like
select *(without Text / nText / image -columns) into #ins from inserted.
So I tried to build a string like this: (using INFORMATIONSCHEMES)
select @sql = 'select a,b,c into #ins from inserted'
exec(@sql)
a,b,c are not of Text, nText or Image datatype.
After executing the trigger, I get an error, that inserted is unknown.
Does anyone know how to solve this ?
Thx.
get the data from report to create data driven SSRS Subscriptions,
write query :
Running Report:
Hello Guys,Have been getting this error(
Implicit conversion from data type ntext to varchar is not allowed. Use the CONVERT function to run this query.
) when running on the live environment but it was fine when run locally. If anyone has similar problem please let me know the fix you have done.
Thank you.
I want to store my MS-Word documents and Excel sheets in the database. So, i have used
the image datatype. Iam not able to download the documents from the database.
i have used getBytes() method. But when i try to download excel sheet document, i get
a error message saying, "File error: data may have been lost".
Can i get some help. can u say how can i put word and excel docs in the database and
retrieve it.
regards,
sathish
I am using SqlServer 2000 and Jdbc connectivity in my application on windows.So, when i execute a query on Sqlserver database as :
Select * from DBO.RS_TABLELOB where Rep_sync_id > 15 and Rep_server_name != 'replicator' order by Rep_sync_id;
This problem is only with the BLOB data types in table RS_TABLELOB.
Then i got an error as:
[Microsoft][SQLServer 2000 Driver for JDBC]ResultSet can not re-read row data for column
1.'.'.at com.microsoft.jdbc.base.BaseExceptions.createExcep tion(Unknown Source)at
com.microsoft.jdbc.base.BaseExceptions.getExceptio n(Unknown Source)at
com.microsoft.jdbc.base.BaseResultSet.validateColu mnIndex(Unknown Source)at
com.microsoft.jdbc.base.BaseResultSet.getObject(Un known Source)at
com.microsoft.jdbc.base.BaseResultSet.getObject(Un known Source)
Please help me out, if you have any idea!!!
Thanks in advance
John Berry
I'm contemplating a sql server archive strategy that rolls really old data off any sort of dbms and onto low cost media like dvds in a non relational archive format. I dont want to ever worry about these archives spanning different versions of sql when i go to retrieve a range of data that happens to span sql versions (eg one disc was sourced from 2005 another by 2008 but my report needs a union of both).
So I'm thinking about neutral/efficient formats for these archives and a live homegrown catalog that can determine exactly what disc(s) need to be mounted based on passed from and to date parameters...all so that the data that might span discs (and versions and maybe even schemas) can be merged and loaded into my sql version d'jour's "throw away" archive database for a one time report or other unplanned activity.
I remember raw data types being very convenient as an ETL format for our customers who have ssis, but wouldn't want our sqlexpress customers to be left without the archiving capability. Do the "things" that read and write raw data files really originate in some special T-SQL command that all sql editions can use, or is it strictly an ssis thing?
Hi,
I have an encrypted SQL Server 2005 database. Data is encrypted and decrypted using the encryptbykey and decryptbykey statements. I would like to allow the end user to be able to build adhoc reports using the Report Builder. I can't figure out how to decrypt the fields as they are dragged onto the report layout. Does anyone have any insight on how to accomplish this, or is it even possible?
Thanks,
Mark
I have built a data model in visual studio that I am using with report builder in reporting services. The data model is using data from a view in SQL Server 2005. I am trying to apply a filter to the data model to restrict the data available in report builder. I know that I could change the code for the view and filter that data that way, but I would rather creates two models each one producing differnt sets of filtered data. I have tried adding a filter to the data model, but it does not seem to work. Do anyone have any suggestions?
View 3 Replies View RelatedHi all
I have created security roles that restrict access to a certain Dimension
and a member therein.
The security works fine when the users finened in it runs a report:
The data is accordingley ristricted.
The problem is when those same users run Report Builder and create a report,
those members are no longer restricted and they have acces to absoluteley
all data from the cubes.
Is there some way that I can force the Data Model to follow the cube's security roles?
Any help is much appreciated...
Gerhard Davids
EDIT:
I have found that it uses the wrong user when opening report builder.
For some reason it uses my windows account instead of the one I used to log onto
report manager. This is way the security isnt working
Any thoughts what may be causing this?
I am trying to develop a data model that will filter data based on the user logged in. SUSER_SNAME()
I have a list of User Id's in a look up table, a where clause in a view that filters the data based on who is logged in. This works fine and the data even seems to be filtered when I explore the data in the Data Source View. How ever when I publish the data model to the reporting services site and use report builder the user logged in is no longer recognized. All I am really trying to do is set up report builder so that users can generate reports and only have access to thier data via a customer number. I just can't allow users to see other users data and I don't want to set up a different datasource view for each user. Does any one have any experience with this?
In Report Builder 1.0 you could drag a column to a filter and see the data before select the values for the filter.I can't find a way to do that in report builder 3.0. is it possible to see the data of a column in Report builder or SSRS?
View 3 Replies View RelatedReport Builder 3.0 . I have two datasets and I am using LookupSet to return data (a list of dates) but what I am after is the LAST date in the set. I have tried to use Last but I keep getting an error.Â
=Last(LookupSet(Fields!Model_Name.Value,Fields!Model_Name.Value,Fields!Read_Date.Value,"dsPageCount"))
I even tried doing a Last on the above statement with a Join thrown in, but that just gets me errors as well. I tried to Code in a function to go through the dataset and return the last piece of data, but again...error.Â
Function LastLookup(ByVal items As Object()) As Date
If items Is Nothing Then
Return Nothing
End If
Dim suma As Date = New Date()
For Each item As Object In items
suma = CDate(item)
Next
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
I have a report designed in RB3 that uses a data source from a SQL database that is on the report server. I want to add data to the report from an access database an a network drive.
I can add the second data source and create a data set to add data to the report. The dataset query returns data from the Access database but when I run the report I get the following error.
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'Feasibility'. (rsError OpeningConnection)
Also when I test the connection to the Access data base I get error ERROR (IM002) (Microsoft)(ODBC Driver Manger) Data source name not found and no default driver specified.
I noticed that Report Builder is connecting to the report server. If I disconnect from the report server I can a can connect to the Access data base but not the SQL database.
How can I get the report to run against both data sources?
Currently, I want to get images of an item in my report for illustration purpose.
Below is my query to get image for item 'GL-10000' in the database. However, I would like to pass a parameter value, '@sItem', from my report so that it would get all related pics of items. Â
SQL Query:
Select top 1 item_picture_mst.picture from item_picture_mst
where item_picture_mst.item in (select item_all.item from item_all where item_all.item = 'GL-10000')
ORDER BY item_picture_mst.picture DESC;
Hi,
I need to create letter type reports using the report builder, is this possible?. I am trying to create a letter that embeds some variable fields, i.e,. name, address, contact number. I can't seem to find a way to create page headers, and embed report data fields within text. Is this not possible within the report builder? it seems that the only thing you can do within the report builder is add fields to their predesignated areas. I am being forced to use the report builder instead of the report designer in order to give the end user the ability to make modifications to the report/letter. This is very frustrating. not being able to allow the user to edit report designer files, and then having force them to use report builder which doesn't seem to support some simple features..
Any suggestions would be appreciated...
Based on a table like below I have created a report so that I can compare number of items in the main warehouse (LOCATION1) and the outlets (LOCATION2 and LOCATION3).
___________________________________
| ID | PRODUCT_INDEX | LOCATION Â | VALUE |
___________________________________
| 1 Â | INDEX1 Â Â Â Â Â Â | LOCATION1 | 1 Â Â Â Â |
___________________________________
| 2 Â | INDEX1 Â Â Â Â Â Â | LOCATION2 | 1 Â Â Â Â |
___________________________________
| 3 Â | INDEX1 Â Â Â Â Â Â | LOCATION3 | 0 Â Â Â Â |
___________________________________
| 4 Â | INDEX2 Â Â Â Â Â Â | LOCATION1 | 0 Â Â Â Â |
___________________________________
| 5 Â | INDEX2 Â Â Â Â Â Â | LOCATION2 | 0 Â Â Â Â |
___________________________________
| 6 Â | INDEX2 Â Â Â Â Â Â | LOCATION3 | 1 Â Â Â Â |
___________________________________
| 7 Â | INDEX3 Â Â Â Â Â Â | LOCATION1 | 1 Â Â Â Â |
___________________________________
| 8 Â | INDEX3 Â Â Â Â Â Â | LOCATION2 | 0 Â Â Â Â |
___________________________________
| 9 Â | INDEX3 Â Â Â Â Â Â | LOCATION3 | 1 Â Â Â Â |
___________________________________
The way I present data in my Report is as such. I want to show items that are available in the warehouse that should be moved to the outlets.
selectÂ
 a.PRODUCT_INDEX
, a.LOCATION1(VALUE)
, b.LOCATION2(VALUE)
, c.LOCATION3(VALUE) Â
fromÂ
[Code] .....
__________________________________________________________________
| PRODUCT_INDEX | LOCATION1 (VALUE) | LOCATION2 (VALUE) | LOCATION3 (VALUE)|
__________________________________________________________________
| INDEX1 Â Â Â Â Â Â Â | 0 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 0 Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
__________________________________________________________________
| INDEX2 Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 0 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
__________________________________________________________________
| INDEX3 Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 0 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
__________________________________________________________________
I have added some parameters in my report to filter out products that are not available in warehouse (LOCATION1) and this works great.
select * from VIEW where 'LOCATION1(VALUE)' > 0 and ('LOCATION2(VALUE)' = 0 or 'LOCATION3(VALUE)' = 0)
__________________________________________________________________
| PRODUCT_INDEX | LOCATION1 (VALUE) | LOCATION2 (VALUE) | LOCATION3 (VALUE)|
__________________________________________________________________
| INDEX1 Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 0 Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
__________________________________________________________________
| INDEX3 Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 0 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
__________________________________________________________________
Now the issue starts when I add a parameter to my report for user to choose which outlets (LOCATIONs) he wants in the equation. I know how to make a column disappear based on parameter value but how to take it out of equation? At the moment when user selects only LOCATION2 and not LOCATION3 then data is not filtered correctly:
__________________________________________________
| JOIN_ON_VALUES | LOCATION1 (VALUE) | LOCATION2 (VALUE) |
__________________________________________________
| INDEX1 Â Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 1 Â Â Â Â Â |
__________________________________________________
| INDEX3 Â Â Â Â Â Â Â Â | 1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 0 Â Â Â Â Â |
__________________________________________________
Ideally I would like a user to select random outlets (warehouse would be static on the report) and compare one or multiple and only show records that are 0 in the outlets.
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedWhen I enter over 4000 chars in any ntext field in my SQL Server 2005 database (directly in the database and through the application) I get an error saying that the data could not be updated because string or binary data would be truncated.Has anyone ever seen this? I cannot figure out what is causing it, ntext should be able to hold a lot more data that this...
View 7 Replies View RelatedHi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
Does anyone know of any cross-references between SQL Server data types and the new data types introduced with SQL Server Integration Services?
View 6 Replies View RelatedI have one column in SQL Server 2005 of data type VARCHAR(4000).
I have imported sql Server 2005 database data into one mdb file.After importing a data into the mdb file, above column
data type converted into the memo type in the Access database.
now when I am trying to import a data from this MS Access File(db1.mdb) into the another SQL Server 2005 database, got the error of Unicode Converting a memo data type conversion in Export/Import data wizard.
Could you please let me know what is the reason?
I know that memo data type does not supported into the SQl Server 2005.
I am with SQL Server 2005 Standard Edition with SP2.
Please help me to understans this issue correctly?
i have created asp.net page, one feild of this page text area.
when i insert some text through this page in "text feild" of SQL server on few words of this feild cut and inserted to text feild of SQL server but all text that i have written in text area feild.
can u please help me how to handle so that i can all text in text feild of SQL server data type text/next.
Hi all,
My organization have a web-based application and needs it to support multilingual so we will be adapting our app to use unicode. However, one of our problems is to convert existing data from text to ntext. I couldn't find anything that document this. What is the best way to do that? I would like to be able to migrate the data from an existing text column to another ntext column in the table.
I brief you about my system, I used List manager system to store the messages and distribute to all members. Right now,by design the Lyris system keep the message in the text field which mean it 's not support multilanguage directly because of unicode field. We needs to create new Db which has the data structure as same as Lyris but just one difference is keep the message in unicode format (ntext) which we need the sql script to automatically update the new record get from Lyris to new DB.
If I can't do that, what are the options? If it's possible, I would like to be able to do this in sql script.
Thanks a mil, in advance.
Eddie
Hello, I have worked with SQL Server 2000 but now we have a requirement where I need to write values from an asp.net form into an XML type in SQL Server 2005.I have never used XML as a type in SQL Server 2005. How do we write xml into xml type. For example the structure of XML is something like:<application><applicationID = "value"></applicationID><customerName="value></customerName></application>I have to write this kind of XML into the XML type and later retrieve these XML values and populate the form again.Kindly suggest. Thanks a lot.
View 1 Replies View RelatedI am trying to create a report with a sub report in Sql Server 2012 using Report Builder Version 3. Â I can run the subreport without any problems. Â I read where using a shared connection can cause this error so both the main report and the subreport use a connection that is embedded in my report. Â
For testing, I created the subreport without a parameter and added it to the main report. Â When I ran it that way, the report worked and sub report displayed the data. Â So I know it can read from the database.It seems to only give me this error when I am trying to tie the two reports together using a parameter. Â
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class