Hi,
I created a report model based over the cube. The problme is, it retrieves all dimensions from the cube regardless those are checked or not even in the prespective.
It does work with Measure but not with Dimensions.
Appreciate if some one can drop a line here and help me out.
Thank you
Imran
Good afternoon all,
I have created a cube in Analysis Services with a time dimension named Time. The data is only needed at the month level, so the fields in the table that the dimension is based on are [DTE MM] and [DTE YR]. In Visual Studio 2005 or in SQL Server Mgmt Studio I can browse the dimension and I see that Time has the following attributes: Year and Month both Regular attributes and Time (Key attribute). There is also a hierarchy named [Year - Month] and if I browse that it looks good dril down from All to Year to Month.
However, when I point my Reporting Services Datasource to the cube, and start Query Builder, I see two dimensions, [DTE MM] and [DTE YR] and no Time dimension.
[DTE MM] has attributes [DTE MM].[Month], [DTE MM].[Time], [DTE MM].[Year], [DTE MM].[Year - Month].
[DTE YR] has attributes [DTE YR].[Month], [DTE YR].[Time], [DTE YR].[Year], [DTE YR].[Year - Month]
This is causing me huge problems in my report. I need to use a date range in the query. To do this, I created Query Parameters and refer to Report Parameters that will be passed in. For example, I use ="[DTE YR].[Year - Month].[Year].&[" + Parameters!StartYear.Value + "].&[" + Parameters!StartMonth.Value +"]" (thanks to Simon Philips) as the query parameter for the Start Year Month, but if I use the [DTE YR].[Year - Month] in my SELECT, the data is not sliced in my query results. That is to say that the Year and Month show correctly, according to the date range, but the Measure is equal for each month and is equal to the total for the cube. To slice the data, I have to use [DTE YR].[Year].[Year] and [DTE MM].[Month].[Month] in my select, but then the data is shown for every month, i.e. the date range is ignored.
What am I doing wrong, or is this a quirk of RS that I can work around?
Thanks,
Kathryn
Hi,
When i select datasource in Report Builder, i am able to see all the available DataSources.
Eg: I have selected one datasource from the list and which has 3 tables(table1, table2, table3) associated to that datasource.
when i drag and drop table1 fields to report, i am not able to see the other 2 tables(table2 & table3)
Is there any property or relationship do i need to maintain?
Thanks,
SR.
Hello,i am in a problem that i am having a table with 100 rows while i ampresenting in report i want to limit rows to be 10 in a page in thereport like that i want to get 10 pages .Please say me the procedurefor this.Thanks,Baba.
View 1 Replies View RelatedI just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies View RelatedAfter I use the report builder to create a generic report, how do I actually get that report into the report designer so that I can modify it more effectivly?
The issue that I have now is that the file on the report server is not a .rdl file and if I simply save it as one and then bring it into VS to modify it the code file is a html structure rater than a XML file type.
Any suggestions would be appreciated. Thanks
I've created a linked server with a pretty basic Excel spreadsheet, and used this command to create a linked server to it:
sp_addlinkedserver ''XL_SPS_1', 'Excel', 'Microsoft.Jet.OLEDB.4.0', 'c:MyExcel.xls', null, 'Excel 8.0'
I want to use this as the data from which to build a report model. As linked servers don't show up in the Data Source View wizard, I created a view in SQL Server:
create view MyExcel
as
select * from XL_SPS_1...Sheet1$
Okay, great, now the view shows up in the DSV wizard and I can create the data source view. However, when I create a new report model based on this data source view, the Report Model Wizard tells me at "Create entities for all tables" that I've got an error when it processes dbo_MyExcel that "Table does not have a primary key."
I assume this is where the identifying attributes for the entities in the report model are taken from, so I really can't go further. Does anyone have an idea as to how to add a primary key to a linked server (Excel) in SQL 2005? Can this be done? Other than importing spreadsheet data to a SQL table, how can I get around this?
Thanks,
--Stan
We have a remote business client who has a proxy server setup and this translates into receiving a 407 proxy authentication blocking error when attempting to download the report builder application for deployment off the report server which is housed locally with us. The proxy server does not allow them to download application type files off another site. At the moment, they would not like to disable the proxy for these users to allow them to deploy the application on their client or add the report server as a trusted site. Is there a method by which Report Builder can be locally installed on the client pc instead of online only with it knowing the correct report server to access and then still launch correctly when the report builder button is pressed through report manager?
I am not a web application guru by any means and we have tried to replicate the oneclick deployment and what occurs in the local settings/apps/2.0 subdirectories, but the application still attempts to download/install again. If we attempt to just launch the local executable on the client, report builder assumes the client pc (localhost) is the report server to access. Is there a method which will succeed?
Hi,
I am unable to launch report builder from the report manager from a client machine. But I am able to launch from the localhost.
Even I am able to launch report builder by clicking reportbuilder.exe on the local machine.
Please help !!
OS - Windows XP professional
SQL Reporting Services 2005.
hi
I have installed SQL Server Reporting Service on window xp. everything working fine except one thing.
I have installed sql server with my a/c. my a/c have admin rights. when i giving http://dineshpatel/reports it is displaying page but Report Builder and other option are not displaying. I hope i don't have admin rights.
I have checked with local administrator login also but same problem.
what additional setting are require for admin rights?
Dinesh Patel
I have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch (
MID(Fields!protocol_id.Value,1,7)="THERAPY",
Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value), Nothing)),
MID(Fields!protocol_id.Value,1,7) = "GENERAL" and MID(Fields!program_id.Value,1,6)
= "INTAKE", Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
HI, there,
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Thanks
Jack
I have provided required permissions, still user not able to view report builder option in his console.
what could be wrong? what needs to be done to provide report builder to users.
Deleep P
I have client machine in one domain, say A domain , on which I have installed .net 2.0 without any problem. I have report server running in other domain (B domain) where I have deployed few models which will be used from domain A to create ad hoc reports by launching Report Builder. I can access other reports in domain B from A
But when I click on Report Builder ..it tries to connect to server in domain B but fails to connect and shows following log in a text pop up
I know, problem is because of cross domain communication but question is then how to fix it ? what changes I need to do for that in firewall, domain etc etc settings?
Here is the error, I have highlighted lines which might give some clue:
------------------------------------------------------------------------------------------
PLATFORM VERSION INFO
Windows : 5.2.3790.65536 (Win32NT)
Common Language Runtime : 2.0.50727.42
System.Deployment.dll : 2.0.50727.42 (RTM.050727-4200)
mscorwks.dll : 2.0.50727.42 (RTM.050727-4200)
dfdll.dll : 2.0.50727.42 (RTM.050727-4200)
dfshim.dll : 2.0.50727.42 (RTM.050727-4200)
SOURCES
Deployment url : http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application resulted in exception. Following failure messages were detected:
+ Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed.
+ The remote server returned an error: (500) Internal Server Error.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [12/19/2006 6:49:58 AM] : Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [12/19/2006 6:50:14 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
- Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Net.WebException
- The remote server returned an error: (500) Internal Server Error.
- Source: System
- Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
I was wondering if there was any way to add a value field to a report, with the time it took for the report to Process.
It would probably be a text field with an Expression, but don't know how that would go.
I know that in Expression there is a value for ExecutionTime (when report began to run), but nothing about when it ends.Can this be done? and if yes, how?
Is there a way to see Report-Level variables in Report Builder 3.0? Also, just as a feedback, it would be really nice if there were a way to see and easily access all of the variables used in a report from one location instead of going to the dataset, the report, and then to the individual groups (if needed) to see the variables. Also, it would be very useful if Group-level variables can show up in the Expression Builder as well.
View 2 Replies View RelatedI've gotten to the point of publishing the new reports on the SSRS server and have run into the following problem.
I use a field in the primary report with the "Go to report" action to open up another report (also published) for more details. It works properly from within ReportBuilder (2.0) using the report server and I can go to and from the secondary report as I expect. Its passing the correct parameters to the second report and its runs.
But when I use the reports from the SSRS web, the Go To link no longer works. Mouse hover shows its still a link but clicking goes no where. I can run both reports independently from SSRS and they still work.
I've tried this in IE and Chrome with no luck in either. I also poked around at Compatability view and popup blocker but nothing made any difference.
I am setting up the SQL2005 reporting service to let users build their own reports on the web. I'll provide them with pre-built report models. We have concern with SQL database performance by allowing users to execute huge reports. The problem that I have is: If I give the users permissions to build report they'll have access to the report's Properties | Execution page, which allows them to disable the report execution timeout. Is there a way for me to allow them build reports while restrict them to access the report execution timeout settings?
Please advise. Many thanks.
Hi,
I've created dsv that contain all fields from table database. in the smdl I've remove some fileds due to security. All fields in the smdl do not contain drill.
Issue: When I created calculated field in the report builder the field has a link. When I clicked the drill I saw all the record data including field that not in the smdl.
Questions:
1) Can I remove the link from the calculated fields?
2) Can I prevent from users drill to fields that not in the smdl?
Thanks,
Assaf
Hi,
I have environment that use SSRS 2005 ad hoc reporting.
One of the users (out of 200) is unable to open or save reports in the report builder.
the user succeed to open the report builder, when he try to save report that he build from shema he get error. as well when he try to open an existing report that build in the report builder he also get an error,
On open the error is:
The numeric portion of 2pt cannot be parsed as a unit of the type point.
The Initilizer for 'Microsoft.ReportingServices.Design.Constants' threw an exception
On Save the error is:
System.IO.StreamReader: Deserialization failed: The type initializer for 'Microsoft.ReportingServices.Design.Constants' threw an exception. Line 2, position 2
Please note that I succeed with second user to create ad hoc report on the first user
computer. I also failed to with the first user to create ad hoc on another computer.
It seems like permissions issue
Thanks,
Assaf
Is it possible to dynamically refresh the report model of the report builder?
could it even be using code with any of the interfaces?
When we add a table or add a column to the table in database , will the report model get refreshed automatically or do we need to do it externally. If so, can we use any of the objects and write a custom code in VB.
Using the report builder, I created a simple report based on a report model. This report runs ok in the report builder.
I proceeded to save the report to the report server, but when I want to view this report in Report Manager, I get the following error:
An error has occurred during report processing.
Query execution failed for data set 'dataSet'.
Incorrect syntax near '<'. The label 'xmlns' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xmlns' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xmlns' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xsi' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xsi' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xsi' has already been declared. Label names must be unique within a query batch or stored procedure.
Hi
I am working on Report builder project and was wondering if somone can help me with below questions
Is it possible to convert RDL files built in report designer to Report Builde RDL file? if yes then is there any tool or we will have to do it manually. I have also seen that there is no SQL in RDL files created in Report Builder.
If above is not possible then my second question is if we can only copy the layout but as we have got 1000 RDL files in built by report desinger how can we automatically convert this into layout in Report Builder.
Does Microsoft has any specific tools for this?
Will highly appreciate for any help on above.
Thanks
M
I would like to automate a report using Report Builder 3.0. I have limited access to the Reporting Services, so I would like to create a task on my workstation to automatically run the report by clicking one button.
View 6 Replies View RelatedHi,
Is anyone using Report Builder via a Report Model generated from Analysis Services in production?
From what I have seen on the Forum people have done this from books, but it is not clear as to whether they have used it at work, in production. There do appear to be reports of some problems with the integration between the two, and with performance.
The attraction of Report Builder on top of Analysis Services is that we should only need to define measures, security, etc, once in the Cube, not twice, as we would if we had to use Report Builder on top of a relational source, alongside Cubes on Analysis Services.
What I would like to find out is:
1) If there is someone who has deployed Report Builder on top of both a relational data source and Analysis Services. If so, which has been taken up best by the users?
2) How does the navigation in Report Builder work with Cubes. It seems a little bizarre in that you can only drill down, never up. Is there any way around this. Do you need to design the Cube specifically to support the Report Model? If so how?
3) The generation of the report model is easy. However, is there any way to control this, or to edit it later?
4) We have had problems with Report Models on relational sources where changes have invalidated the Report Model and all reports built on it. Can similar problems arise, for example, if you change the Cube and then Re-Generate the Report Model?
5) Are there any other issues around Report Builder. The two I have found so far seem to be Hidden Dimensions showing up, and Report Builder not working if measures are defined as non-aggregatable.
6) Are there any other end-user adhoc reporting products which work better with Analysis Services?
Regards
Paul
I have created couple report through report builder which using AS cube as the data source. Every time when I try to access the New Subscription from the web UI. It complains about "Subscriptions cannot be created because the cedentals used to run the report are not stored, or if a linked report, the link is no longer valid.".
So I went into "Properties" -> "Data Source" and use the custom data source. I've selected "Microsoft SQL Server Analysis Services" and put in the following Data Source=SQLTEST;Initial Catalog="Data Warehouse AS". I've select "Crednetials stored securely in the report server", using my Windows login and password.. and I've got the following error.
"
An error has occurred during report processing.
Query execution failed for data set 'dataSet'.
The SemanticQuery element at line 7, column 351 (namespace http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling) cannot appear under Envelope/Body/Execute/Command. "
Please help!!!
I deployed the same report model to 2 different SSRS servers. The report only has 1 field with count of records from 1 table. I can drill down on this column on 1 server, but not on the other server. This column is set to drillabe on the report model.
Is there any SSRS configuration that is stopping me drilling down on it?
When saving a report in Report Builder the default users folder is displayed when save is first clicked. However the user can navigate to any folder from the root on down.
Is there anyway to only allow the user to access their "My Report" folder and not navigate to other folders?
Users are currently placed in a Windows Group. The windoes group is given System User and My Reports roles.
The version of Report Builder I have will only let me choose from a very limited range of layouts. For example, the tabular layout displays a single table on a page.
Is there a way to produce a report containing two tables and other fields?
For example, I would like to create a very simple customer report with customer name and address at the top, then a table containing all contacts I have for the the customer (a 1:N sub-table of customer) and then a second table containing all the orders from the customer (a 1:N sub-table of customer).
Is this possible in the current version of Report Builder or is it planned in a future relase?
P.S. I know this is easy in VS Report Designer but I specifically want to do this in Report Builder. The Report Designer client is simply too complex for my non-technical user base. Report Builder would be ideal.
Hi,
I have a couple of reports that I created within the SQL Report Designer, I
would like to give the ability to the end user of C# Winform application to
be able to make modification to this .rdl file using the Report Builder,
however when I try and launch the report that I created within the Report
Designer using the Report builder I get the following error..
Microsoft.ReportingServices.ReportBuilder.ReportModel.Report: The report
'http://localhost/ReportServer/MyReport)' cannot be opened because no data
source is associated with it. Associate a model data source with this report
and try again.
How can I resolve this situation.
I'm not sure if my approach is the best or if I'm I should be looking at the solution from another approach
Thanks
Hi,
In Report Builder(SSRS 2005 sp2), is there a way to automatically save a report the user is working on? The problem is that somtimes a user would be spending a long time working on a new report and the connection would timeout and the user has to start all over again.
-waslam
I get this error with Report Builder "Report Execution Error" the report might not be valid or the server could not process the data.
View 30 Replies View Related
A simple tabular Report Builder report was written to feed another system that requires quoted CSV. I have two issues when exported:
1) I can't get control over the exported column names. Currently, they are exported as "FIELDNAME_Value".
When I try to change the column headings in the designer, it has no effect on the exported column names
When I create a New Field and specify my desired column name (e.g., COMPANY), the export appears as COMPANY_Value.
How do I control these names for the CSV export?
2) The spec calls for quoted text. In my export, only values with special characters are quoted.
Thanks in advance.
-DRB