Report Header Alignment In Dynamic Report

Jun 22, 2007

All,



I have a report that grows horizontally as it contains a matrix. In the header section of the report, I have items such as Title and time stamp in text boxes. How can I make these items align in the center if the report grows horizontally, it looks kinda odd with report title not being in the center? Any input will be appreciated.



Thanks.

View 1 Replies


ADVERTISEMENT

Reporting Services :: Display Logo / Image In Middle Of Report Header In SSRS Report

Jun 22, 2015

How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report  are static. we are using SSRS 2008

View 6 Replies View Related

Displaying Sub Report Header When Part Of Main Report.

Dec 27, 2006

Does anyone know a way to display the header of a sub report when the sub report is part of a main report? Im able to get the main report and the sub report to display properly, but the header of the previously developed/tested sub report will not display when embedded in a main report.

Thanks,

MP

View 4 Replies View Related

Absolutely Page-bottom Alignment On Report Footer: Impossible?

Mar 21, 2007

Relative newb to SSRS here, but the answer to this question evades me; answers and insight are appreciated.

Report in question is an invoice form. It requires an absolutely bottom-of-page aligned footer that has databound elements.

This is so that whatever page that footer finally appears on will print in such a way that the address will align in a windowed envelope.

Ironically, Books Online gives this exact scenario in explaining headers and footers in SSRS, but they cleverly don't explain how an absolutely bottom-of-page-aligned and data-bound footer can be made to happen. Headers at absolute page top is obviously no problem. Footers at page bottom, not so much.

So, this is not a "page footer"--page footers are employed in the body. Also this footer is databound, so a page footer as it's known in SSRS is out the window anyway.

Most of the time this will print on a single page, but if it breaks to multiple pages, that footer needs to go all the way to the absolute bottom.

I grasp that the "report footer" for SSRS is just what appears at the end of any repeating controls that you've implemented in your body. Because SSRS uses this kind of repeating-control based idiom rather than a section-based idiom as Crystal does, this kind of (what I would consider very basic) positioning control is looking fairly impossible right now.

Among what I've tried:

--Page footer (can't; databound)

--Specifying a page break after the pre-footer controls, and/or a page break before the controls that make up the footer in their properties. This leads to unpredictable results with blank printed pages (as many as 8 for what previews as a 2-page report, how silly is that?).

--Putting in a page-height rectangle as part of the footer (with and without the page breaks mentioned above), with the idea of forcing a basically blank page at the end of the report so that the footer will go to the bottom. SSRS will go ahead and break the page anyway on long elements like that, which again leads to the "footer" being printed in the middle or top of the final page, or whereever it happens to fall.

I may be having to explain to my client that you can't get there from here, and they may have to redesign their report. Does anyone have any insight?

Thank you for your time in reading this.

View 14 Replies View Related

SSRS 2005: Report Header Does Not Export To Excel As Page Header

Mar 13, 2008

I need some help. I am writing a report in SSRS 2005 that I then need to export to Excel. When I put a report header I would expect the header to not display in the Excel spreadsheet until the Print Preview or the Print. The report footer works just fine I put some text in the footer, and it shows up in the footer. The header though, shows up as a row in the Excel spreadsheet that then causes columns to merge. How do I get the report header to act like a page header?

View 1 Replies View Related

Reporting Services :: Subreport Header Is Not Showing Inside A Report With A Header On Its Own?

May 13, 2015

I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?

View 3 Replies View Related

Reporting Services :: Absolutely Page-bottom Alignment On Report Footer

Mar 21, 2007

Report in question is an invoice form. It requires an absolutely bottom-of-page aligned footer that has databound elements. This is so that whatever page that footer finally appears on will print in such a way that the address will align in a windowed envelope. Ironically, Books Online gives this exact scenario in explaining headers and footers in SSRS, but they cleverly don't explain how an absolutely bottom-of-page-aligned and data-bound footer can be made to happen. Headers at absolute page top is obviously no problem. Footers at page bottom, not so much.So, this is not a "page footer"--page footers are employed in the body. Also this footer is databound, so a page footer as it's known in SSRS is out the window anyway.

Most of the time this will print on a single page, but if it breaks to multiple pages, that footer needs to go all the way to the absolute bottom.I grasp that the "report footer" for SSRS is just what appears at the end of any repeating controls that you've implemented in your body. Because SSRS uses this kind of repeating-control based idiom rather than a section-based idiom as Crystal does, this kind of (what I would consider very basic) positioning control is looking fairly impossible right now.Among what I've tried:

--Page footer (can't; databound)
--Specifying a page break after the pre-footer controls, and/or a page break before the controls that make up the footer in their properties. This leads to unpredictable results with blank printed pages (as many as 8 for what previews as a 2-page report, how silly is that?).
--Putting in a page-height rectangle as part of the footer (with and without the page breaks mentioned above), with the idea of forcing a basically blank page at the end of the report so that the footer will go to the bottom. SSRS will go ahead and break the page anyway on long elements like that, which again leads to the "footer" being printed in the middle or top of the final page, or whereever it happens to fall.

I may be having to explain to my client that you can't get there from here, and they may have to redesign their report.

View 13 Replies View Related

Report Header Pagination: On Next Page(2) The Header Is Disappearing In IE

Nov 6, 2007

Hi Friends,

There is a one header in the report, when I publish and hit the report in IE(internet explor) the header appears fine on first page when I go to next page this header does not appear.

But in mozilla the header is visible on every page of the report. so it is working fine in mozilla.

I donot why it is happening?

Your help is highly appreciated.

Thanks
Novin

View 1 Replies View Related

Page Header And Page Footer Not Loading Report Items In The Main Report When Subreport Called?

Apr 2, 2007

Hi All,



I am having a main report having two subreports, say M1,S1 and S2 respectively.

The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,

Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()

Any Solution?





Thanks and Regards

Pragash

View 1 Replies View Related

Reporting Services :: Way To Subscribe SSRS Report Using Dynamic Parameters For Email And Trigger Report

Feb 8, 2015

Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.

View 3 Replies View Related

'Dynamic Time(year,month,date)' Report Template (rdl) Using Report Designer VS2005

Jan 19, 2007

I have three types of specific reports that i have to create with the input parameters (range) either

1: By date (rdl 1)

2.By Month (rdl 2)

3.By Year (rdl 3)

Is it possible ( or how do I ) to create just one report template ( one rdl) with the three sets of parameters ( hiding/invisible which ever two sets base on user selection) and the output of the report will display the desired type( either by year, month or date).

I ask this because its possible to create a drill down report from year down to date etc in report designer (vs 2005). Not sure if I can create one instead of three rdls and with the 'logic' built within that template.

Thanks

Regards

Alu

View 4 Replies View Related

Dynamic Refresh Of Report Model In The Report Builder

Jan 22, 2007

Is it possible to dynamically refresh the report model of the report builder?

could it even be using code with any of the interfaces?

When we add a table or add a column to the table in database , will the report model get refreshed automatically or do we need to do it externally. If so, can we use any of the objects and write a custom code in VB.

View 1 Replies View Related

Report Export To Excel - Report Header Is Not Appearing In Each Page Of Excel.

Feb 28, 2007

I've built a fairly straight forward report in RS that looks normal in preview mode and in PDF format with out any issues.But when I export it to Excel report header is not appearing in each page.Any ideas as to why this is occurring?thanks in advance,Ramesh KS

View 1 Replies View Related

Report Header

May 30, 2007

Hi,
I need to create a report header that will only be shown on the first page. And I want to use the built in header system that is included with report. I can't create a custom header on the body part because I am using multiple columns for report rendering. Currently the header system either displays the header on all pages or it shows in all pages except the first or last page. Any help is greatly appreciated. Thanks.

View 4 Replies View Related

Report Header

Jul 13, 2007

Can any one tell me what to use to substitute Table in report Header?Or is there any other way?Because when i am using Textboxes align horizontally as replace to table,to align to my table in the body,when i exported it to excel,ive got problems in alignment in cell,Thanks

View 7 Replies View Related

Report Header

Jun 13, 2006

How can I
create a header that will only appear on the first page? The page
header doesn't seem to have an expression area that would accomplish
this and globals are not useable in table headers.

Thanks

View 3 Replies View Related

SSRS 2005 - Email Report On Execution To Dynamic List With Dynamic Parameters = No Schedule

Nov 23, 2007

Hi,
I have a need to display on screen AND email a pdf report to email addresses specified at run time, executing the report with a parameter specified by the user. I have looked into data driven subscriptions, but it seems this is based on scheduling. Unfortunately for the majority of the project I will only have access to SQL 2005 Standard Edition (Production system is Enterprise), so I cannot investigate thoroughly.

So, is this possible using data driven subscriptions? Scenario is:

1. User enters parameter used for query, as well as email addresses.
2. Report is generated and displayed on screen.
3. Report is emailed to addresses specified by user.

Any tips on how to get this working?

Thanks

Mark Smith

View 3 Replies View Related

Report Header Woes

Jan 25, 2006

I am creating a report which consists of data in two columns. I've set the Body section to have 2 columns in it. This works fine until I start working with the report header. I do not want a page header that shows up on every page, I only want a header on the first page, a report header.

I first tried to hide the header by placing it in the Page Header section, then putting in the "page > 1" expression in the visibility property. This does what I want, except a large blank space is present at the top of my report (the header is about 1.2 "). This is unacceptable.

So my next test was to put the header into the Body section so that it only shows up in the beginning of the report. Because of this, I will need to remove the columns from the Body and make it only 1 column now. I decided to put the multi-column section into a subreport that has 2 columns and add this to the body of my report. But, this failed; the data appears in one column only. I can change the width the ensure it fits and set all other sorts of properties, nothing works.

I've researched both issues and found that these are both "bugs" in reporting services, although I cannot find thedocumented bugs.

Is there any workaround to putting a header onto only the first page of a multi-column report? Other reporting engines are able to handle this with ease, I'm suprised by Reporting Services lack of a "Report Header" section. I am an experienced .NET developer, so if there is a programmatic way through this, I am game.

Thanks,

Scott Steigerwald

View 13 Replies View Related

Two Images In SQL Report Header

Nov 16, 2007

Hi all,
I have a client report in which I have two images in the header portion. I have assigned two different images for the two image report controls.

The Problem is that the report is showing two images in only one system. (I ran the code which is available in SOURCE CONTROL, so the code is not the problem)

In all other systems the first image is getting repeated. The configuration is same and there is no change in HARDWARE.



Have anybody faced the same problem.....................

View 6 Replies View Related

Image In Report Header

Jul 18, 2007

I embeded an image in my report.When i export it to PDF and Excel,it works fine but in HTML in does not show..

Can anyone tel me why..

Thanks,

Plengski

View 1 Replies View Related

Datafields In Report Header

Jan 12, 2006

Hi.

I want some information stored in the database to be shown on the top of each page in my report. But in the report designer I get an error message if I try to drop a table in the header, and if I try to assign the value of a textbox in the header to e.g. "First(Fields!sometable.Value)", I get a runtime-error in the preview that says "... Fields cannot be used in page headers or footers".

How can I do this?

Regards, Tomsi

View 36 Replies View Related

Use Fields In Report Header

Dec 26, 2007



I have placed a textbox in the pageheader section of the report. In the textbox expression, I am trying to use a field . THis is an example of the expression in that textbox.

=First(Fields!ID.Value, "Jobstat")
Howver it gives an err "THE Value expression for textbox referes toa field. Fields cannot be used in page headers or page footers"..Is there any other option that I have? I need this expression/field to be a part of page header, but not table header.
Also, pl note that I have tried to place the field expression in a text box in the body of the report, and then refer to that text box in the page header or footer.However, when I do that, my expression does not appear on any pages of the report, only appears on the last page of the report.

View 5 Replies View Related

Report Links In Page Header

Oct 4, 2006

I have a report that I put links to other reports in the page header.

When I click on those links, I get the error:

"source of the report definition has not been specified"

If I move the links to the body of the report, they work fine.

Is this a bug or a limitation, and will we eventually be able to put links in the header?

Thanks!

BobP

View 3 Replies View Related

Column Header For Matrix Report

Sep 1, 2006

I have a matrix report, which looks like the following:

Header C Header D

Column A Column B Column C Column D



Column A and B are Row Group columns in the matrix. Column C and D are the details columns. How can I add column header to column A and B. Seems I cannot do it in Reporting Services 2005.



Fan

View 8 Replies View Related

Accessing Text Box Value In Report Header

Nov 22, 2007

Hi,

I have a report with 2 tables (table1 and table2) in the report body. I have txtempname kept in table 1. I access the textbox value in the header using the following expression

=(report!txtempname.value)

This works fine. However when table2 gets populated on of the subsequent pages, the value in the header disappears. It is visible only for the 1st 10 pages where the table 1 data is there.

How to make sure that the value of the header displays for all the pages

thanks
Killy.

View 3 Replies View Related

Databound Image In Report Header

Jun 14, 2006

After finding out that SSRS doesn't directly support databound items in the header or footer, I found the workaround from Microsoft yesterday at http://msdn2.microsoft.com/en-us/library/ms159677.aspx. The problem is that their solution only works for the first page of the report, so it's basically useless! Because this is an image, it also means the workaround of using a parameter doesn't work, either.

Does anybody have any advice? Is there a solution to this problem?

View 10 Replies View Related

Report Header In Reporting Services

Oct 22, 2007

Is there any thing like Report header in SSRS ? As a work around I am using a Rectangle control in the page header which I make visible if page number is 1 otherwise not visible. But if its invisible only the other items in the header seem to move up while the body height remains unchanged which I do not want. I want the body height to increase if the Report header is absent. Please let me know if I am missing something or if the SSRS has something like Report header already.

View 6 Replies View Related

Freezing Column And Header In Report

Mar 15, 2007

I have report with large records and many columns

I would like to freez header and specific column like excel

I tried to freez header it self it's worked

I tried to freez a column it self it's worked

when I tried to freez both in same report it does not work..

any help??

View 1 Replies View Related

How To Add A Group Header And Footer For A Report

Jan 9, 2007

I have a report that is being called via stored proc, and i want to group by contract. when report gets generated i get multiple contracts info. but will be grouped/sorted by contract.

please how can i have a group header and also a group footer to show a summary of each contract information with some calculated fields in it.

i may get 100 records related to 10 contracts , 10 rows for each contract.

as soon as the first contract info is shown on the report it has to show a summary related to the first contract in the group footer, and then continue populating the second contract info and so on.

Please i am totally new to reporting and help would be appreciated. thank you all.

View 2 Replies View Related

Report Header In SQL Reporting Services

Oct 24, 2007





Is there anyway to create a Report Header in SQL Reporting Services?



I am guessing "no", but I have to at least try and ask away.



Okay, I have had reports where on the first page they want a report header, and then on the 2nd and the consequent pages they want a page header. This is simple, in the Page Header I put the text box(s) for the Report Header in one Rectangle and then the text box(s) for the Page Header in another Rectangle, stack the Rectangles on to of each other, and set the visibility property of the panels accordingly.



I also see on the table control (which I am using on my report), you can set the table header row(s) to either print on every page or only on the first page.



Neither of these options will work for the report I am trying to build based on a Crystal Report.



I have a page header that needs to appear on every page including the first page. It is about 3/8" tall. And then there is a requested report header that should only appear on the first page. The report header is about 2" tall. So if I try my trick I used before, I will have 2" inches of white space on the 2nd and consequent pages. The Report Header would correctly print on the first page, but the size of the Rectangle (even if the visible property is set to false) will still eat up white space.



Is there anyway around this, or will I need to have the users redesign their report to fit SQL reporting services?



Let me know if you have any ideas.



Thank you,



T.J.

View 8 Replies View Related

Datename In Report Page Header

Nov 9, 2007

I'm trying to get the following sql to work in a textbox. I have select the textbox properties and it's value is
=datename(m,dateadd(m,-1,current_timestamp))

I would like the results of "October"

however I get the following error


The value expression for the textbox €˜textbox1€™ contains an error: [BC30451] Name 'datename' is not declared.



I'm pretty new to this so I do not know excatly what that error means.

Any help for me out there?

Thanks,
Cardgunner

View 11 Replies View Related

Want To Display Report Without Header/parameter Section

May 22, 2008

Hi all,

I'm trying to embed a report into a CRM IFrame. So I have the report created in Business Intelligence Visual Studio 2005, but I need to display it with none of the header details SRS displays by default.

Using the following URL I included rc:toolbar=false and rcarameters=false but they don't seem to make any difference. I basically need to display the report content as if it were part of that page and not an SRS hosted page.

https://server/Reports/Pages/Report.aspx?ItemPath=%2fAllpress_MSCRM%2fCustomReportsForCRM%2fa&rs:Command=Render&rc:toolbar=false&&rcarameters=false&rs:ClearSession=true&type=1&typename=account&orgname=Allpress&userlcid=1033&orglcid=1033

Anyone have some pointers for me?


Kia

View 1 Replies View Related

Multi-column Report Page Header

Aug 2, 2007

I have a multi-column report with a page header that spans the width of the report. Whenever I close the report and reopen it, the header is changed to the width of the column. This isn't a real big deal because I deploy it with the header across the whole page; but once in a blue moon I accidentally hit the F5 key (which I am used to using for refresh in other environments I work in) and the report gets redeployed with the messed up header. Is there anyway to stop RS from automatically adjusting the page header?

And is there anyway to disable the F5 key from deploying the reports. I do use it to build and run windows apps, and don't want to change that, but I don't want to deploy 80+ reports when I accidentially hit it.

Thanks.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved