Report Manager Virtual Directory Configuration Problem
Jan 21, 2008
Hi, I have a problem with SQL Server 2005 Reporting Service. I installed Reporting Service in my machine. When I was trying to configure the Reporting Service, Report Manager Virtual Directory got disabled. I need to enable this Report Manager Virtual directory. I can see the disabled link for Report Manager Virtual Directory and it shows the error: Report Manager Virtual Directory is not configurable for the current mode. Kindly help me out of this problem. Thanks Subhendu
Hi, I have a problem with SQL Server 2005 Reporting Service. I installed Reporting Service in my machine. When I was trying to configure the Reporting Service, Report Manager Virtual Directory got disabled. I need to enable this Report Manager Virtual directory. I can see the disabled link for Report Manager Virtual Directory and it shows the error: Report Manager Virtual Directory is not configurable for the current mode. Kindly help me out of this problem. Thanks Subhendu
I am trying to configure the Report Manager Virtual Directory but cannot do it. In the Configure Report Server screen, the option is greyed out (there is a tick next to it to say that it has been configured, but this is greyed out too)!
Hi, I hope someone can help me! I changed the TCP port that the default instance of SQL 2005 x64 SP1 is listening on and now SQL server won't start as the port is being used - no problem I say to myself, I'll just change it again, however I can't!
My problem is that I can not change the TCP Port back again using Configuration Manager - no matter what values I put in, after a restart of the instance it comes up with this in the IP Addresses tab for TCP/IP Properties and SQL Server won't start:
IP1 Active Yes Enabled No IP Address aaa.bbb.ccc.111 TCP Dynamic Ports TCP Port 0
IP2 Active Yes Enabled No IP Address aaa.bbb.ccc.222 TCP Dynamic Ports TCP Port 0
IP3 Active Yes Enabled No IP Address aaa.bbb.ccc.333 TCP Dynamic Ports TCP Port 0
IP4 Active Yes Enabled No IP Address 10.1.1.1 TCP Dynamic Ports TCP Port 0
IP5 Active Yes Enabled No IP Address 127.0.0.1 TCP Dynamic Ports TCP Port 0
IPALL TCP Dynamic Ports 2020 TCP Port 2020
Interestingly, the ip address that the server is listening on aaa.bbb.ccc.444 is not reported in the list of IP addresses in the configuration manager for this instance, yet it is when I view the available IP addresses for the other two instances - is this significant?
I have tried failing to the other node, changing it there, changing it at the console and also while logged onto the the virtual machine remote desktop, rebooting both nodes, etc, etc. There are two other instances on this cluster that are still working fine but I hvae not attempted to change the TCP ports they listen on.
I used the same method to change this default instance as I did for a named instance on a similarly configured cluster and it worked fine. How to fix this?
Regards, Mike
2007-02-27 12:03:17.69 Server Server is listening on [ aaa.bbb.ccc.444<ipv4> 2020]. 2007-02-27 12:03:17.71 spid9s Starting up database 'tempdb'. 2007-02-27 12:03:17.72 Server Error: 26023, Severity: 16, State: 1. 2007-02-27 12:03:17.72 Server Server TCP provider failed to listen on [ aaa.bbb.ccc.444<ipv4> 2020]. Tcp port is already in use. 2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1. 2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0xa. 2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1. 2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0x1. 2007-02-27 12:03:17.75 Server Error: 17826, Severity: 18, State: 3. 2007-02-27 12:03:17.75 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2007-02-27 12:03:17.77 Server Error: 17120, Severity: 16, State: 1. 2007-02-27 12:03:17.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
We deployed Reporting Services recently to a customer with a latest release and build. When they type in http://<server>/ReportServer, this just comes up with a screen like a navigation sreen showing folders and links to reports. What needs to be done to get the Report Manager screen showing?
It has been a while since I actually installed Reporting Services. When they go into configuration, all of the green checks are there (except for Web Service Identity, which is Red).
I have written an installer that creates an MS SQL Database, creates the necessary data tables and then imports the data into the data tables. All this works fine. I now need to copy the web pages to a directory on the users machine and then make the chosen directory a virtual directory so the user can call the pages in the usual way (http://localhost/mytestsite/index.html)
Would anyone know how to create a virtual directory using dos command line parameters. I have seen something using "IIsVdir.vbs" but I do not have this script file.
When I opened "Reporting Service Configuration Manger" from SQL server configuration tool list, The "Report Server Installation Instance window came out. It showed my local machine name on the field of Machine Name. When I click "Find" button, a message box came out. It says: "No report server were found on the specified machine. Details: Invalid namespace
I Installed SQL server 2005, installation completed with out any warnings. but when trying to configure reporting services it is not configured and throwing error msg as create virtual directory.
and the error msg looks like
" ReportServicesConfigUI.WMIProvider.WMIProviderException: The virtual directory specified is not valid. Make sure the specified name is not too long and doesn't contain illegal characters. (example: ;)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.CreateVirtualDirectory(String virtualDirectory, String path) "
Im getting the message error "The page cannot be found", while trying to access the Report Manager throught its virtual directory. Otherwise the Report Server url access works fine and both virtual directories have the same configuration
Any suggestion ?!?!
Reporting Services is running on Windows Server 2003
We regularly deploy our product to client's sites and install a named instance of SQL Server 2005 and Reporting Services on their Windows Server. We use the instance name "lgs" during SQL setup and it automatically ensures we have a http://server/Reports$lgs and http://server/ReportServer$lgs to work with.
A recent deployment had some trouble with their OS and we have needed to reinstall the Reporting Services component of SQL. After reinstalling, the virtual directories for Reports$lgs and ReportServer$lgs are gone. I have used the Reporting Services Configuration tool to create new virtual directories but when I enter Reports$lgs or ReportServer$lgs as the names I get an error. The error says that the virtual directories cannot
be created due to illegal characters in the names.
How can I create the same virtual dirs that would have normally been created during initial installation?
In SQL2K you could implement web virtual directory (using IIS) that allowed you to query a stored procedure from any HTTP browser (e.g. IE, Netscape, Opera, ...) from anywhere in the world.
would return a HTML page of information as defined in Display_Info stored procedure. This was very useful but a little slow due to IIS overhead!
ENDPOINT & http.sys allow access SQL2005 without IIS which should be faster (?). Hence I have been trying to configure ENDPOINT to do something similar without success. Furthermore there is little information on what you can do with the "FOR TSQL" option and how to use it.
PS I don't want to use SOAP as the client will be a web browser not an apps.
I have some problem about Reporting Service integrated for SharePoint 2007.
At first, I created 1 user named "User1" under "Domain1". User1 has role "SharePointAdmin" Group and Local Admin Group.
Then I created application pool named "RSAppPool". Its identy was "Domain1User1".
After that, I install Reporting Service and SP2.
Then I config Reporting Service to Integrated Sharepoint Mode below.
Report Server Directory Setting: "ReportServer" in "Default Web Site".
Window Service Identity: Service Account : "Domain1User1" (Windows Accout)
Web Service Identity: Report Server: "RSAppPool" (that created above) Report Manager: Empty
Database Setup: Database name: Database1 (Server Mode: SharePoint Integrated) Credential Type : Windows Credentials Account Name: Domain1User1
After configuration, I reset IIS and test browse to http://servername/ReportServer/ , then there is a Windows Login dialog.
I enter "Domain1User1" and User1's password. But User1 cannot right to access to "ReportServer" virtual directory.
This is error message
You are not authorized to view this page You do not have permission to view this directory or page using the credentials that you supplied. HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials. Internet Information Services (IIS)
There was a 2008 SSRS service running on server "abc".
I have a .Net UI that uses the wsdl at [URL] ....
They deployed SSRS 2012 service on a new server "xyz".
DNS points abc to xyz. Nslookup looks right shows both xyz and abc alias to the same IP.
when I try to go to [URL] .... it redirects to xyz as expected for the host name but the HTTP GET /ReportServer is appended with GET /Reports/ReportServer which doesn't exist and I get an 404 error.
I have no admin rights to see anything and I have no idea if it was an inplace upgrade or a new server. I assume it's new since the actual server name changed in nslookup. Why would it append the default virtual directory when it makes the hop to server "xyz"?
Hi,I've just installed SQL server and then IIS and SQLCE tools.I created a virtual directory and was trying to update the NTFSpermissions from SQLServer Connectivity management when i got thefollowing error - Access Control List (structure) invalid.Has anyone come across this and if so, what did u do to fix it.ThanksLyn
I have a an asp.net application running under IIS. this application is using two folders, the virtual directory under C:Inetpubwwwroot and the application phisical folder at C:. I want to manage this applications .mdf database using microsoft sql server management studio express(iam running sql express with advanced services) which means i have to attach the database to Ms sql server managemet studio express tool. What i dont know is if i should attach the .mdf file in the physical folder's App_Data folder at C:myapplicationFolderApp_data or the .mdf file in the virtual directory under C:InetpubwwwrootMyapplicationFolderApp_Data I dont know which of the two i should attach. Where exactly is the running database, the .mdf file in the physical folder or the .mdf file in the virtual directory under wwwroot.
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
We have an application that requires write settings to reportserver virtual directory for the IUSR account when anonymous is turned on during the install. Once the install is complete, we lock down the IUSR account so that it only has browse access to the virtual directory when enabling anonymous access.
We automate the uninstall and install of our daily builds and I'm trying to figure out if I can automated this process somehow either through command line utility or in vbs.
[DTS.Pipeline] Information: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 12 buffers were considered and 12 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
I have been tasked with moving our SQL server estate onto new 64bit SQL 2008 Virtual servers on a VM base. Each Virtual server will be attached to our SAN that i will have no control over. Do i ask for multiple LUNs pretending that there is a COS), Etemp), FData) and Glog) disk structure or do I just present a very big space as a single C: drive and let it go.We are consolidating lots of old physical servers onto fewer (more powerful) virtual servers (according to the VM and SAN administrators)
Each time you start a SSIS project you have Solutions Configuration showing "Development". In the drop down box you can select "Configuration Manager..."
Can someone tell me the use of this, and is it related to the package configurations somehow. I've tried to create new Solution Configurations like "Test" and "Production" with the purpose of binding different configuration files and deplymentfolders to each Solution Configuration but still it seems like this isn't the way i should be used...
We use Cisco Call Manager 4.1(3), We use RTMT Tool to monitor our devices & now Daily once i get a error message as Directory connection failed . Monitored precanned object has value of 0., can anyone tell me what could be the excat cause or how can we troubleshoot this issue or what services should we check on our call manager to overcome this error.
A user was created with a limited privilege under the USERS group. Once this user loged in the Report Manager he is acting like an Admin and Content Manager, though he is not given even a browser role.
What do u think that this guy is acting like a Super User evenif he is restricted to a browser role on the Report Manager ????????????
I have an application ready to transfer to the web hosting server with MS SQL 2005. Database and tables were created with the VWD on the local machine (SQLEXPRESS). I am using MS SQL Server Managenemt Studio Express to create the SQL to add the local tabales and data to the hosting database. My connect to the hosting server is great. Problem: My connection to SQLEPRESS is good but it only allows me to map Database from this directory C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData. I need to map to another directory as follows C:Documents and SettingsdflournoyMy DocumentsVisual Studio 2005WebSitescolumbushapps/app_data. So I can get to the tables I created locally. Also has someone put together a process to migrate from SQLEXPRESS (Local) to Remote or Production SQL 2005 or 2000.
For some reason, when opening up the SQL Server Configuration Manager for one of my SQL Servers, the 'Requesting data from WMI provider..' message stays there. It never gets the data. This is in regards to services management. Its not a big deal, because I can log on to the server to accomplish this, but it would be nice to do it from SSMS. It works for other SQL Servers. Has anyone experienced this before?
I've had weeks trying to establish connections between my PC and Small Business Server 2003 running SqlExpress. Finally sorted out the problem, and wanted to go into Sql Exp Configuration Manager.
This I've been using for weeks, yet today I get a message that " MMC could not create the snap-in".
I thought that MMC update 3.0 may be the problem., however, cannot find any indication that my server has been updated to MMC 3.0.
If that does happen to be the cause, how do I get around it.?
I just installed 3 instances of SQL Server 2005, installing the two named instances first and then the defaul instance third.
My configuration Manager only shows the two named instance services and the default does not show up.
Under Services in Computer Manager, it does show.
Any one run across this, and I would think it might cause some problems now that all the service configuration changes need to be performed in SQL Server Configuration Manager.
I am getting this error when i clicked on configuration manager. "Cannot connect to WMI provider. You do not have permissions or the server is unreachable. Note that you can only manage SQL server 2005 and later servers with configuration manager only."
We changed the IP addresses for several SQL Servers and we're a little confused by what we see in Configuration Manager. The TCP/IP properties "IP Addresses" tab still shows the old IP address, even after a restart. On "Protocol" tab, Listen All is set to "Yes".
We've found one source that says this setting causes the listening on an individual IP to be ignored.
